I have created a W10 VM (guest) running docker, pulled microsoft/nanoserver image and hosted a container of the image.
(tutorial here: https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start_windows_10)
Everything runs great, even host can ping the container running under guest W10. But what i cannot do, is to connect a remote powershell to container.
Enter-PSSession -ComputerName "<container ip>" -Credential ~\Administrator
This pops up a dialog asking for user and password. I cannot leave it blank or etc - the result is access denied. Any ideas how to connect or set a password for nanoserver container ?
I've been struggling with this for a few days now. However, think my problem is slightly different though, as I'm trying to do an Enter-PSSession to a windows docker container, but from another machine, not the container host.
In this tutorial (http://dinventive.com/blog/2016/01/30/windows-server-core-hello-container/), the guy makes a nested container PSSession inside a host PSSession.
He uses this command, which is only available in the latest versions of Powershell. (not in v3)
Enter-PSSession -ContainerId "<container ID>"
Get the ID by doing :
Get-Container | fl
You also have to check your Powershell version and make an upgrade if needed.
To check PS version :
$PSVersionTable
And to download Powershell latest version : https://www.microsoft.com/en-us/download/details.aspx?id=50395
When connecting to a PS-Session using a IP address it adds some requirements, You must either have the remote device configured to use ssl or have the IP address listed in your trusted hosts.
The solution is to either try use the host name for the device, I have had great success with this. Or play with the trusted hosts list. In my experience it works consistently if you add trusted list entries on your machine and the remote machine as well. You can also specify:
Set-Item WSMan:\localhost\Client\TrustedHosts -Value "*"
This will basically set all machines to be in the trusted hosts list, It has its cons like all machines being trusted but in certain restricted networks its acceptable. Doing this on the host and client machine seems to yield best results.
When specifying -Credentials it expects a credential object, You can craft one before the cmdlet to avoid entering it every time like so:
$secpass = convertto-securestring "Password Here" -asplaintext -force
$cred = new-object -typename System.Management.Automation.PSCredential -argumentlist "Username Here", $secpass
Enter-PSSession -ComputerName "<container ip>" -Credential $cred
Coding credentials like this in a script is bad practice, You should look in to storing credentials in scripts properly, there are plenty of good resources on it.
Related
Been able to do it against Microsoft.PowerShell (5.1), but today I hit a known issue on 5.1 with remote Copy-Item so I installed PowerShell 7 on the remote server (checking "Enable Remoting" in the installer) and am trying to get it working.
$securePassword = ConvertTo-SecureString -AsPlainText -Force -String $Password
$credential = New-Object -TypeName system.management.automation.pscredential -ArgumentList $Username, $securePassword
$session = New-PSSession $targetMachineHostName -Credential $credential -ConfigurationName "Microsoft.PowerShell"
Enter-PSSession $session
Above works. But if I change ConfigurationName to "PowerShell.7.1.0" I get:
[myserver.com.au] Connecting to remote server myserver.com.au failed with
| the following error message : <f:WSManFault
| xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault" Code="2689860592"
| Machine="myserver.com.au"><f:Message><f:ProviderFault provider="PowerShell.7.1.0"
| path="C:\Windows\system32\PowerShell\7.1.0\pwrshplugin.dll"></f:ProviderFault></f:Message></f:WSManFault> For more information, see the about_Remote_Troubleshooting Help topic.
On the remote server I've run enable ps remoting in a 7.1 powershell so if I run Get-PSSessionConfiguration it returns a bunch of configurations, including the following:
Name : PowerShell.7.1.0
PSVersion : 7.1
StartupScript :
RunAsUser :
Permission : NT AUTHORITY\INTERACTIVE AccessAllowed, BUILTIN\Administrators AccessAllowed, BUILTIN\Remote
Management Users AccessAllowed
The dll the error refers to exists on the machine.
The user credentials I'm using are for a Local User on the remote machine that isn't an Administrator, but belongs to the Remote Management Users group.
Also worth noting from the remote machine itself (as a different Adminstrator local account, I can start a session to localhost).
After making the user an Administrator I was able to connect, but I'd gone to great lengths earlier to make non-Adminstrator possible on 5.1.
Out of interest, I tried giving the user Full Control to C:\Windows\system32\PowerShell\7.1.0 and then I could connect...
Still would love to know what's going on though and whether I'm doing the right thing or minimum permissions required.
It seems like the minimum security permissions to the folder are:
Read & Execute
List folder contents
Read
Write
Write is bizarre, but without it I get that error. I've assigned those permissions to the "Remote Management Users" group.
Docs here touch a little bit on v5.1 vs v7, and then link to here mentioning an install script so maybe something has fallen through the cracks.
I was getting the same error. I installed PowerShell 7 from Microsoft Store and then ran Enable-PSRemoting. I got this error so I uninstalled it and reinstalled it from WinGet which uses the MSI. That didn't work either. I tried running Enable-PSRemoting again, but nothing changed.
I ran Install-PowerShellRemoting.ps1 and it gave me two errors about things already existing and did not fix the problem. However, I was able to resolve the problem by doing the following:
Delete the PowerShell 7 plugins: Remove-Item 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\PowerShell.7','HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\PowerShell.7.1.1'.
Run Install-PowerShellRemoting.ps1 again.
I'm not sure what the difference was, but deleting and allowing the script to generate it again fixed it for me.
Disclaimer: I am not a DevOps guy so please forgive any ignorance. I'm learning this stuff to expand my understanding.
I've enabled remote Powershell on a Windows Server 2019 instance in order to stop/start scheduled tasks during deployment of files from my build server (also Windows Server 2019).
I followed the below steps in an Administrator Powershell as the Adminstrator user on the remote server:
1. Enable RSRemoting.
2. Remove existing listener.
3. Create self-signed certificate and export to crt file.
$Cert = New-SelfSignedCertificate -CertstoreLocation Cert:\LocalMachine\My -DnsName "<subdomain.domain.com>"
Create listener.
Create firewall rules to allow secure PSRemoting and disable unsecure connections.
Copy certificate to build server.
Import certificate on build server.
From the build server, I've tested the configuration using the following commands in Powershell:
$username = 'Administrator'
$pass = ConvertTo-SecureString -string '<password here>' -AsPlainText -Force
$cred = New-Object -typename System.Management.Automation.PSCredential -argumentlist $username, $pass
Invoke-Command -ComputerName <subdomain.domain.com> -UseSSL -ScriptBlock {whoami} -Credential $cred
Which responds nicely with win-<some stuff>\administrator. However, when I execute a remote Powersehll command from within a TeamCity build step, I get a big ugly Connecting to remote server <subdomain.domain.com> failed with the following error message : Access is denied..
The weird part is, this worked two days ago and I have several builds that were able to complete all remote operations. From this morning, it's just stopped working - poof!
If I fudge the credentials, I do get an incorrect username/password error so it is definitely reaching the server.
Another interesting find is that if I run
[bool](Test-WSMan)
on the remote server, I get True returned, but if I run the same command with -ComputerName <subdomain.domain.com> on the build server, I get
WinRM cannot complete the operation. Verify that the specified computer name is
valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits
access to remote computers within the same local subnet. returned.
Both the remote host and build server are logged on as the default Administrator.
Any ideas?
After more research and calling in a few favours, I was advised to tweak the TeamCity Build Agent and TeamCity Server services. These need to Log On As a User and not Local System. I can't explain how my previous settings worked. The Access is denied error I experienced has nothing to do with the Remote Powershell configuration mentioned above.
I have a question regarding multihopping in a windows environment.
Let's say I have a schedule running on Server A (Central Scheduler) which executes a command on Server B. This script contains a call to save files on a remote filer (UNC path, Server C). Hop 1 (from A to B) works well, hop 2 (from B to C) fails.
I already tested to save the files locally on server B, that works flawlessly.
I think there's a problem with the second hop. I remember reading something like this on a forum a while ago, but can't remember a solution.
In detail, the command looks like this:
$session = New-PSSession -computer ComputerName
$templatepath = "\\filerpath\"
Invoke-Command -Session $session -Scriptblock { powershell ovpmutil cfg pol dnl $Using:templatepath /p \BSH }
To clarify: Powershell gives me an "Access denied" when performing the second hop. I already enabled Credential delegation as described here:
Enabling Multihop Remoting
Any help is appreciated. Thanks in advance
The solution is a real pain in the backside if you ask me but here it is...
On the originating server (A):
Set-Item WSMAN:\localhost\client\auth\credssp -value $true
On the intermediate server (B):
Set-Item WSMAN:\localhost\client\auth\credssp -value $true
Open Group Policy editor on server A, navigate to:
Computer Configuration > Administrative Templates > System > Credentials Delegation
Enable these options:
Allow delegating fresh credentials
Allow delegating fresh credentials with NTLM-only server authentication
Both policies need to have server B added to the allowed list, wildcards are allowed. Note that if you use RDP from server A you'll also need to add TERMSRV/*
When running Invoke-Command from server A, include the -Authentication CredSSP param.
Note that if saving SecureStrings somewhere for the credential to connect to server C, you'll want to either use a fixed encryption (specify byte array) or plain text and convert it.
I am trying to execute some PowerShell code in a remote computer using the following:
$session = New-PSSession -Credential "myDomain\myUserName" -ComputerName "remoteCompName"
$result = Invoke-Command -Session $session -ScriptBlock {
New-Item -type file C:\test10.txt
}
I am prompted to enter my password in a GUI. I do that. It then errors out with:
New-PSSession : One or more computer names are not valid. If you are
trying to pass a URI, use the -ConnectionUri parameter, or pass URI
objects instead of strings.
I replaced the computer name with the FQDN. Still no luck. What is going on here?
There are other questions on stackoverflow on executing PowerShell scripts on remote machines of course but none address this error.
BTW, the machine is part of the domain and is running.
Additional info added later [EDIT]
Things to know:
The machine is part of the domain and is running.
I checked if PS remoting is enabled. It was.
I checked if WinRM is running. It is.
The remote machine is a VM and it is a 2012 R2.
Here is what I've tried:
I replaced the computer name with the FQDN. Still no luck.
I removed the credential parameter
I tried another remote machine (also a VM)
I tried another source machine, i.e. the machine I am running the command from)
Thanks!
-Rohan.
When I use a remote machine with a name that is just alphanumeric (no underscores, dashes, etc.), it works! The name of all machines I tried before had leading '_' in them. That was the cause of the error. (The answer was suggested by Rhys W Edwards on the Windows PowerShell TechNet forum, which is within Windows Server forums).
Just put your ComputerName to braces like this {Remote_Computer_Name}
So I'm trying to use the PS script found at http://gallery.technet.microsoft.com/scriptcenter/Get-product-keys-of-local-83b4ce97#content to pull Windows product keys from my domain remotely. However, when it hits a host it returns Exception calling “OpenRemoteBaseKey” with “2″ argument(s): “The network path was not found” instead of the product key. It should also be noted that this works locally. After poking around at the internals of the script, it seems like the offending line is
$remoteReg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine,$Computer)
Research (because I'm totally new to PoSH) indicates that this type of error gets thrown when remote registry access isn't working. Trying to hook into the registry on my test target via regedit shows that I need to have Windows Firewall: Allow inbound remote administration exception set to enabled in Group Policy. I set it and then pulled the updated policy down to the same result. What other stuff might be getting in the way of my connection?
I would recommend using PSRemoting over using the remote registry. Assuming this is set up, all you would have to do is:
$computers = #('localhost')#list of computers
#unless you are currently logged in as a domain admin
# you will need to provide credentials
$cred = Get-Credential domain\administrator
Invoke-Command -Credential $cred -ComputerName $computers -ScriptBlock {
function Get-ProductKey{
#from http://gallery.technet.microsoft.com/scriptcenter/Get-product-keys-of-local-83b4ce97
}
get-ProductKey
}| ft Computername,OSDescription,OSVersion,ProductKey
This will print out the following output:
Computername OSDescription OSVersion ProductKey
------------ ------------- --------- ----------
%name% Microsoft Windows 8 Pro 6.2.9200 XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
I used the following command through powershell, ran it as admin:
wmic /user:jc1_admin /node:pc00202 os get "SerialNumber"