I am trying to install next js in VS code, when I type 'npx create-next-app' in the powershell terminal in VS, it showed error by saying:
The term 'npx' is not recognized as the name of a cmdlet, function, script file, or operable program.Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
I have already install node 10.13 like the documentation of next asked me to...
Here is a picture
It means npx is not installed in your machine please check or update your npm or installed npx first.
use this cmd to check if it is installed or not npx --version if not then update your node and npm version
as in your attachment, you did not pass the project name as you should provide the project name as well npx create-next-app myapp
When installed, try
npx create-next-app [name here]
cd my-project
Install node.js, helped me. Then check version. npx -v, then install it npx create-react-app my-app for example
I'm trying (for hours now) to install the cargo crate diesel_cli for postgres. However, every time I run the recommended cargo command:
cargo install diesel_cli --no-default-features --features postgres
I wait a few minutes just to see the same build fail with this message:
note: LINK : fatal error LNK1181: cannot open input file 'libpq.lib'
error: aborting due to previous error
error: failed to compile `diesel_cli v1.4.1`, intermediate artifacts can be found at `C:\Users\<user name here>\AppData\Local\Temp\cargo-installUU2DtT`
Caused by:
could not compile `diesel_cli`.
I'm running postgres in a docker container and have the binaries on my C:\pgsql with the lib and bin directories both on the PATH so I can't figure out why it's not linking. What else could be required they didn't mention in the docs?
In my case the installation was successful but when I tried to run it this error occured.
maybe this would work for others who have the same problem:
open PowerShell
type in setx PQ_LIB_DIR "C:\Program Files\PostgreSQL\13\lib" (or any other path to your PostgreSQL lib)
restart your PC
run again
I had the same issue with WSL, if you're on Linux probably you could find PostgreSQL lib location and add it to your environment variables.
Update:
The answer below is a work around for older versions. Please check the possibility to execute cargo clean first
Original Version
Adding the folder to the PATH variable didn't help, at least in my case, as by some reason it is not used in the /LIBPATH parameter passed to link.exe.
In my case it was C:\Users\<username>\.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib
You can see it in the beginning of the error message.
Copy libpq.lib in there and it will be used from there.
After installation diesel would require some other assemblies. Copy libcrypto-1_1-x64.dll, libiconv-2.dll and libssl-1_1-x64.dll into the folder showed after where diesel command execution
I had the same error on Ubuntu and for me the following install fixed the issue:
sudo apt install libpq-dev
No need to move files around, just add C:\Program Files\PostgreSQL\14\lib and C:\Program Files\PostgreSQL\14\bin to your PATH. Installing and running diesel should have no problems.
Note: your paths may be different, and remember to close/reopen your terminal so the PATH variable is updated.
(Tested on Windows 10)
To give clear steps for windows:
Add C:\Users<username>.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib in the path in environment variables
Copy libpq.lib that is in C:\Program Files\PostgreSQL\14\lib (obviously this is with version 14) and paste it in C:\Users<username>.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib
If you've attempted to cargo build (or anything that runs the build scripts for libpq rust crate) when your environment was invalid, then you need to do a cargo clean after fixing your environment otherwise you'll still get the libpq.lib not found error even when it's in your PATH. The other answers where you copy the file into another directory are just hacks
You can instead add the path to .../lib to the compilers' library search paths, using RUSTFLAGS environment variable. It works both for installing diesel_cli and for building your projects.
RUSTFLAGS='-L /usr/local/pgsql/lib' cargo build
On Windows with EDB installer, the path contains a space, so use CARGO_ENCODED_RUSTFLAGS instead. For PowerShell:
$env:CARGO_ENCODED_RUSTFLAGS = "-L`u{1f}C:\Program Files\PostgreSQL\14\lib"
I am currently working on using grpc-web to write a simple client for my service. I have created a service.proto file which was successfully compiled using protoc. The problem arose when I tried to generate the gRPC-Web service client stub using the plugin protoc-gen-grpc-web which doesnt work despite having installed the latter.
Got the following error :
protoc -I=./ service.proto --grpc-web_out=import_style=commonjs,mode=grpcwebtext:./
protoc-gen-grpc-web: program not found or is not executable
--grpc-web_out: protoc-gen-grpc-web: Plugin failed with status code 1.
Any suggestions on how to solve this issue? Thank you!
You'll need to make the protoc-gen-grpc-web plugin executable and move it to a directory that is discoverable from your PATH environment variable.
From grpc-web/README:
For example, in MacOS, you can do:
$ sudo mv ~/Downloads/protoc-gen-grpc-web-1.2.1-darwin-x86_64 \
/usr/local/bin/protoc-gen-grpc-web
$ chmod +x /usr/local/bin/protoc-gen-grpc-web
You don't even have to install the plugin globally and make it discoverable from your PATH:
protoc accepts --plugin arguments to point to a required plugin. For protoc-gen-grpc-web (as for many others) there's even npm support, so you can get it with npm i --save-dev protoc-gen-grpc-web and then run protoc with --plugin=protoc-gen-grpc-web=./node_modules/.bin/protoc-gen-grpc-web
I'm using MacOS. You need to install this first with brew
$ brew install protoc-gen-grpc-web
The best solution that I could use for Linux based system was globally installing protoc-gen-grpc-web. This directly takes the files from the /bin of the node_modules files created globally across your system
sudo npm install -g protoc-gen-grpc-web
I was trying to install ionic and create a sample project on it since morning. But, was facing a series of issues since then. Tried solving them one by one. Atlast restarted my machine and opened command prompt to build the sample project and tried
path of the sample project> ionic build android
But, i kept on facing the error that states 'ionic' is not recognized as an internal or external command.
I tried clearing the cache and reinstalling ionic in my machine. Still, I face the same issue of ionic is not recognized as an internal or external command.
Can somebody help me out on this issue?
Thanks
Manikandan J
Somehow , my npm path was not there in PATH environmental Variable
So after adding C:\Users\XXXXX\AppData\Roaming\npm to my PATH variable my problem solved :-)
Try to install the ionic framework with the -g parameter, so the installation will be globall, like this:
npm install -g ionic
-g parameter mean "its binaries end up in your PATH environment variable."
If you're on Windows 10 (and possibly Vista/8/8.1) you need to run cmd.exe as an administrator. Now when you run the commands below, your environment settings will be made.
npm install -g cordova ionic
Check if the configuration is broken or not. the update might have installed it in the wrong place.
First check: npm config get prefix
In my case It wasn't set to /usr/local but in /usr/Roaming.
So to fix it, use: npm config set prefix
Problem solved! :)
After several hours of struggle I fixed it by the below steps:
uninstall node js restart the system .
install the node js (current version).
check your node js path in System variable in an
environmental variable.
Right click the command prompt and select run as administrator. Type cd\ now get into the npm path folder by cd <YourNpmPath>\npm install -g ionic#4
That's it . Now it is globally available throughout the system.
I ran this command to uninstall:
npm uninstall -g ionic cordova
and then ran the install:
npm install -g ionic cordova
and then everything started working again.
Insert this into your system path. This happens because node modules are not seen but when you do this you make the path to the module. They are found in this location
C:\Users\[username]\AppData\Roaming\npm
Below simple steps to follow to get it working:
install Node.js
Install Ionic and cordova : npm install -g cordova ionic
create a simple project: ionic start mySimpleApp tabs
cd mySimpleApp
ionic cordova platform add android
Build the project: ionic build android
For the benefit of searchers, the other answers didn't work for me.
I deleted the 'Ionic' folder from:
C:\Users\..{me}..\AppData\Roaming\npm\node_modules
Then installed again with:
npm install -g ionic cordova
That fixed it.
I solve the problem on windows 10.The problem was that the environment variables don't contain a path to the ionic folder.
Just do:
npm config set prefix
And then
npm install -g ionic cordova
setting the path variable to C:\Users\«user name folder»\appdata\Roaming\npm helped me to resolve the issue. Please try
uninstall the old version
npm uninstall -g ionic
and try to install it again with the new version
npm install -g #ionic/cli
In my situation, I thought Ionic did not install,
but after I had changed my Windows User-Name, npm did for some reason still install on the last %AppData% folder path.
for example correct-path for new user-name is:
C:\Users\Admin\AppData\Roaming\npm
but npm did use:
C:\Users\Abc\AppData\Roaming\npm
have moved that folder contents to the right place and all just works!
But to finally fix the issue from its root cause I updated NPM settings like:
npm config -g set prefix "%AppData%\npm"
npm config -g set cache "%AppData%\npm-cache"
npm config -g get prefix
And ensured my PATH environment-variable includes the correct NPM directory.
This issue occurs when we change the path variables manually.Because of this change system doesn't find libraries for the command which needed to be executed.
While installing ionic cordova, ionic cli takes cares by adding path variable in your environment.Hope this content helps
path -
C:\user\system_name\AppData\Roaming\npm
I had the same problem on Windows, and I find solution by navigating the command prompt to
C:\Users\[username]\AppData\Roaming\npm>
Cordova, Ionic, etc. are found here.
The following steps worked for me in 2022:
Run the command prompt as Admin. This is mandatory to ensure that ionic is installed globally, otherwise you would continue to see the same error message despite installing ionic.
Type this command and hit enter: npm i -g #ionic/cli
That's it!
'ionic/java/cordova etc..' is not recognized as an internal or external command
for ionic or cordova install it from node using npm install -g ionic/cordova command.
This kind of messages comes whenever its PATH not set properly for other programs like java. System has to recognize your command available on your system or not. This can be identified only when you set your environment variable.
use this for setting your path
SET PATH = %PATH%; your app path to bin
Just follow this video, you have to set your path correctly.
http://learn.ionicframework.com/videos/windows-android/
1: Download and Install Java then open your system environment variables, and add to or create a new user variable called PATH with the full path to the bin folder of the new Java SDK installation.
2: Download Apache Ant then add the full path to the bin/ folder to the end of your PATH environment variable.
3: Add Android to PATH :Open up your environment variables setting and add the full path to both the adt-bundle/sdk/platform-tools/ folder and the adt-bundle/sdk/tools/ folder to the end of your PATH variable:
4.Install nodeJs and now you can do
npm install -g cordova ionic
I started getting this same error in the Console2 command prompt. I checked the environment variables and reinstalled ionic and cordova but this did not fixed it.
I then tried ionic in Node.js command prompt and it worked perfectly. So if you follow the other advice and it still doesn't work, try a different command prompt.
I think you should copy the bin file to the system variables and it should be fine, at least I try it on Win7 and it worked. I also got the same prob like this before.
Right click Computer, choose Properties, Advanced system settings and edit environment variables.
Try reinstalling the ionic
npm install ionic -g
uninstall ionic npm package and then clear all npm cache in appdata and then install ionic
npm install -g ionic
ionic info
you must install ionic package has global so use -g.
ionic info command is used to check the ionic information
Well, after trying several answers from many posts like this one and realizing that my environment variables were there too, I ran the
npm install -g cordova ionic
from the inside of nodejs folder in Program Files with windows prompt as administrator.
Initially I was installing it in my dev folder in D:\ partition. Hope it helps someone.
Probably you doesn't have ionic installed in your device.
First check in terminal/cmd, have you installed ionic or not?
you can check it with following command:
ionic -v
C:\Program Files\nodejs\bin
try adding this to your user and environment variables, under environment variables, and then close the command prompt window and open.
I got my problem resolved :)
npm install -g cordova ionic
and then
ionic start myApp tabs
and then
cd myApp
ionic serve
Firstly uninstall the ionic module from the project by using the following command.
npm uninstall -g ionic cordova
Then install ionic and cordova dependencies seperately as follows.
npm install -g ionic
npm install -g cordova
Please check whether ionic cli is installed or not globally and locally both
Node versions
Check if you are using the nvm,
you would have installed the ionc cli with node version 14.X, and now you might be using node 16.X or latest, this is why the ionic cli is not working in latest node version.
check list of node versions if by using nvm:
nvm list
try changing the node version to previous,
NVM user older node
change to older nvm:
nvm use 14.x.x
or your version in list
I am installing yii 2 on a mac. I have mamp pro (3.0.7.3 latest) when i go to the command line and run.
php init i get a message saying
The mcrypt PHP extension is required by Yii2.
I checked the server using phpinfo() and it shows mcypt enabled. I checked the php.ini and it is listed and the file exists in the referenced directory.
any ideas anyone ??
This probably means that your php CLI (Command Line Interface) does not use the same php.ini than MAMP. You could use something like php -c /path/to/mamp/php.ini to be sure to use the same php.ini.
Or try the following command : php --ini, this will show you configuration file names, e.g. :
Configuration File (php.ini) Path: /path/to/php/conf
Loaded Configuration File: (none)
You could then make a symbolic link :
cd /path/to/php/conf
sudo ln -s /path/to/mamp/php.ini php.ini