Related
dump file generated by pg_dump command in postgres 12
command i use in postgres 11.5:
pg_restore -h [host] -p 5432 -U postgres -d [db] -1 backup.dump
error message:
pg_restore: error: could not set default_table_access_method: ERROR: unrecognized configuration parameter "default_table_access_method"
Is it possible to restore it? please advice.
It seems that only pg_restore throws an error, psql just issues a warning. So you could convert your binary dump to text:
pg_restore dumpfile.Fc -f- | psql -U user -d database
This worked for me on linux.
default_table_access_method is not available in pg11. So the workaround is to take a plain dump of source database and remove the following given below entry from your backup.dump file
SET default_table_access_method = heap;
After that use the below command for restoring the dump on target pg1
I've downloaded the latest copy of my heroku database with
$ curl -o latest.dump `heroku pg:backups public-url --app myapp`
And this gives a file with the following type on my local machine:
$ file db/latest.dump
db/latest.dump: PostgreSQL custom database dump - v1.12-0
I'm trying to import this into my local Postgres DB (my_db) using psql. However, I'm getting lots of errors:
$ psql my_db < db/latest.dump
...
psql:db/latest.dump:119425: invalid command \?A~??ܣb?{#?+????LS??
psql:db/latest.dump:119426: invalid command \D%!ѡ/F??g????A???dC????|2?M?$?8GTJ??c?E?;??֛Sh??S?[NP?f?2?+H?W????k
... [thousands of lines]
psql:db/latest.dump:261719: ERROR: invalid byte sequence for encoding "UTF8": 0xba
The command psql -f db/latest.dump my_db fails the same way.
What needs to be done in order to import this file locally into a new database with the same schema, etc?
I was able to use pg_restore to solve the problem:
pg_restore --verbose --clean --no-acl --no-owner -h localhost -U myuser -d my_db db/latest.dump
Locally, I use pgadmin3. On the remote server, however, I have no such luxury.
I've already created the backup of the database and copied it over, but is there a way to restore a backup from the command line? I only see things related to GUI or to pg_dumps.
There are two tools to look at, depending on how you created the dump file.
Your first source of reference should be the man page pg_dump as that is what creates the dump itself. It says:
Dumps can be output in script or
archive file formats. Script dumps are
plain-text files containing the SQL
commands required to reconstruct
the database to the state it was
in at the time it was saved. To
restore from such a script, feed it to
psql(1). Script files can be used
to reconstruct the database even
on other machines and other
architectures; with some modifications
even on other SQL database products.
The alternative archive file formats
must be used with pg_restore(1) to
rebuild the database. They allow
pg_restore to be selective about what
is restored, or even to reorder the
items prior to being restored. The
archive file formats are designed to
be portable across architectures.
So depends on the way it was dumped out. If using Linux/Unix, you can probably figure it out using the excellent file(1) command - if it mentions ASCII text and/or SQL, it should be restored with psql otherwise you should probably use pg_restore.
Restoring is pretty easy:
psql -U username -d dbname < filename.sql
-- For Postgres versions 9.0 or earlier
psql -U username -d dbname -1 -f filename.sql
or
pg_restore -U username -d dbname -1 filename.dump
Check out their respective manpages - there's quite a few options that affect how the restore works. You may have to clean out your "live" databases or recreate them from template0 (as pointed out in a comment) before restoring, depending on how the dumps were generated.
create backup
pg_dump -h localhost -p 5432 -U postgres -F c -b -v -f
"/usr/local/backup/10.70.0.61.backup" old_db
-F c is custom format (compressed, and able to do in parallel with -j N) -b is including blobs, -v is verbose, -f is the backup file name.
restore from backup
pg_restore -h localhost -p 5432 -U postgres -d old_db -v
"/usr/local/backup/10.70.0.61.backup"
important to set -h localhost - option
You might need to be logged in as postgres in order to have full privileges on databases.
su - postgres
psql -l # will list all databases on Postgres cluster
pg_dump/pg_restore
pg_dump -U username -f backup.dump database_name -Fc
switch -F specify format of backup file:
c will use custom PostgreSQL format which is compressed and results in smallest backup file size
d for directory where each file is one table
t for TAR archive (bigger than custom format)
-h/--host Specifies the host name of the machine on which the server is running
-W/--password Force pg_dump to prompt for a password before connecting to a database
restore backup:
pg_restore -d database_name -U username -C backup.dump
Parameter -C should create database before importing data. If it doesn't work you can always create database eg. with command (as user postgres or other account that has rights to create databases) createdb db_name -O owner
pg_dump/psql
In case that you didn't specify the argument -F default plain text SQL format was used (or with -F p). Then you can't use pg_restore. You can import data with psql.
backup:
pg_dump -U username -f backup.sql database_name
restore:
psql -d database_name -f backup.sql
POSTGRESQL 9.1.12
DUMP:
pg_dump -U user db_name > archive_name.sql
put the user password and press enter.
RESTORE:
psql -U user db_name < /directory/archive.sql
put the user password and press enter.
Below is my version of pg_dump which I use to restore the database:
pg_restore -h localhost -p 5432 -U postgres -d my_new_database my_old_database.backup
or use psql:
psql -h localhost -U postgres -p 5432 my_new_database < my_old_database.backup
where -h host, -p port, -u login username, -d name of database
Backup and restore with GZIP
For larger size database this is very good
backup
pg_dump -U user -d mydb | gzip > mydb.pgsql.gz
restore
gunzip -c mydb.pgsql.gz | psql dbname -U user
https://www.postgresql.org/docs/14/backup-dump.html
This worked for me:
pg_restore --verbose --clean --no-acl --no-owner --host=localhost --dbname=db_name --username=username latest.dump
Backup: $ pg_dump -U {user-name} {source_db} -f {dumpfilename.sql}
Restore: $ psql -U {user-name} -d {desintation_db} -f {dumpfilename.sql}
try this:
psql -U <username> -d <dbname> -f <filename>.sql
Restore DB psql from .sql file
Backup & Restore
This is the combo I'm using to backup, drop, create and restore my database (on macOS and Linux):
sudo -u postgres pg_dump -Fc mydb > ./mydb.sql
sudo -u postgres dropdb mydb
sudo -u postgres createdb -O db_user mydb
sudo -u postgres pg_restore -d mydb < ./mydb.sql
Misc
-Fc will compress the database (Format custom)
List PostgreSQL users: sudo -u postgres psql -c "\du+"
You may want to add hostname and date to ./mydb.sql, then change it by:
./`hostname`_mydb_`date +"%Y%m%d_%H%M"`.sql
If you create a backup using pg_dump you can easily restore it in the following way:
Open command line window
Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\9.5\bin"
Enter the command to restore your database. For example: psql.exe -U postgres -d YourDatabase -f D:\Backup\.sql
Type password for your postgres user
Check the restore process
I didnt see here mentions about dump file extension (*.dump).
This solution worked for me:
I got a dump file and needed to recover it.
First I tried to do this with pg_restore and got:
pg_restore: error: input file appears to be a text format dump. Please use psql.
I did it with psql and worked well:
psql -U myUser -d myDataBase < path_to_the_file/file.dump
1. Open the Terminal.
2. Backup your database with following command
your postgres bin -> /opt/PostgreSQL/9.1/bin/
your source database server -> 192.168.1.111
your backup file location and name -> /home/dinesh/db/mydb.backup
your source db name -> mydatabase
/opt/PostgreSQL/9.1/bin/pg_dump --host '192.168.1.111' --port 5432 --username "postgres" --no-password --format custom --blobs --file "/home/dinesh/db/mydb.backup" "mydatabase"
3. Restore mydb.backup file into destination.
your destination server -> localhost
your destination database name -> mydatabase
Create database for restore the backup.
/opt/PostgreSQL/9.1/bin/psql -h 'localhost' -p 5432 -U postgres -c "CREATE DATABASE mydatabase"
Restore the backup.
/opt/PostgreSQL/9.1/bin/pg_restore --host 'localhost' --port 5432 --username "postgres" --dbname "mydatabase" --no-password --clean "/home/dinesh/db/mydb.backup"
1) Open psql terminal.
2) Unzip/ untar the dump file.
3) Create an empty database.
4) use the following command to restore the .dump file
<database_name>-# \i <path_to_.dump_file>
To restore a dump file
psql -d [Dbname] -U [UserName] -p 5432 < [FileLocation]
To restore a .SQL file
pg_restore -U [Username] -d [Dbname] -1 [FileLocation]
If you get user authentication errors, go to the file pg_hba.conf which is in PSQL/data folder in your program files, and change the "METHOD" to "Trust".
Restart you psql serive in windows services(Win + R --> services.msc).
try:
pg_restore -h localhost -p 5432 -U <username> -d <dbname> -1 <filename>
Restoring a postgres backup file depends on how did you take the backup in the first place.
If you used pg_dump with -F c or -F d you need to use pg_restore otherwise you can just use
psql -h localhost -p 5432 -U postgres < backupfile
9 ways to backup and restore postgres databases
As below link said, you can use psql command for restoring the dump file:
https://www.postgresql.org/docs/8.1/static/backup.html#BACKUP-DUMP-RESTORE
psql dbname < infile
if you need to set username just add the username after the command like:
psql dbname < infile username
Sorry for the necropost, but these solutions did not work for me. I'm on postgres 10. On Linux:
I had to change directory to my pg_hba.conf.
I had to edit the file to change method from peer to md5 as stated here
Restart the service: service postgresql-10 restart
Change directory to where my backup.sql was located and execute:
psql postgres -d database_name -1 -f backup.sql
-database_name is the name of my database
-backup.sql is the name of my .sql backup file.
Try to see if the following commands can help you:
sudo su - yourdbuser
psql
\i yourbackupfile
If you have a backup SQL file then you can easily Restore it.
Just follow the instructions, given in the below
1. At first, create a database using pgAdmin or whatever you want (for example my_db is our created db name)
2. Now Open command line window
3. Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\pg10\bin"
4. Enter the following command to restore your database: psql.exe -U postgres -d my_db -f D:\Backup\backup_file_name.sql
Type password for your postgres user if needed and let Postgres to do its work. Then you can check the restore process.
The shortest way with no password prompt
psql "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
If you are using Windows OS
psql.exe "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
I was having authentication problems running pg_dump, so I moved my dump file
mv database_dump /tmp
into the temp directory and then ran
su -u postgres
cd /tmp
pg_restore database_dump
If you have a large database dump, you may just want to create another directory where your current user and the postgres user can access and putting the database dump file into that.
Backup==>
Option1: To take backup along with password in cmd
1.PGPASSWORD="mypassword" pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option2: To take backup without password in cmd
2. pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option3: To take backup as gzip(if database is huge)
3. pg_dump -U postgres -h localhost mydb --inserts | gzip > mydb.gz
Restore:
1. psql -h localhost -d mydb -U postgres -p 5432 < mydb.sql
This solution only works for Windows.
First, ensure you have already added the postgres bin folder to the "Path" environment variable (in my case this folder is C:\Program Files\PostgreSQL\12\bin).
Then, open the Windows command interpreter (cmd), go to the folder where you have the .sql file and execute this command:
pg_restore -U userName -d database-1 backupfile.sql
For example:
pg_restore -U sam -d SamDataBase -1 SamDataBaseBackup.sql
(It can ask you for the password of the user so ensure to type it correctly and then click enter)
Pura vida!
If you have created a new database named mydb, To restore a .sql dump to that database with psql,
psql --file=dump.sql --username=postgres --host=localhost --port=5432 mydb
the password will be prompted by psql
The connection options are
-h, --host=HOSTNAME database server host or socket directory (default: "/var/run/postgresql")
-p, --port=PORT database server port (default: "5432")
-U, --username=USERNAME database user name (default: "xyz")
-w, --no-password never prompt for password
-W, --password force password prompt (should happen automatically)
If you are using docker, this answer may be helpful.
Start the container
docker start <postgres_container_id>
Access bash inside container
docker exec -it <postgres_container_id> bash
Copy the .tar backup file to docker container (In another window)
docker cp postgres_dump.tar <postgres_container_id>:/
Restore the backup
pg_restore -c -U <postgres-user> -d <password> -v "postgres_dump.tar" -W
Enter password
Save and restore the exact same state with compressed dump
Other answers gave all the key bits separately, but hopefully this will provide be the "just works save and restore to exact state" command pair.
Dump to file mydb.psql:
PGPASSWORD=mypassword pg_dump -U my_username -h localhost mydb -Fc -f mydb.psql
Restore:
PGPASSWORD=mypassword pg_restore -U my_username -h localhost \
--clean -d mydb -v mydb.psql
Some of the flags:
-Fc: Format Compressed, as opposed to plaintext.
file tmp.psql says:
tmp.psql: PostgreSQL custom database dump - v1.14-0
--clean: destroy the target DB before restoring it, thus returning to the exact same pristine state.
Any data created after the dump will be lost.
PGPASSWORD, -U and -h can of course be modified depending on your login method, e.g. without PGPASSWORD you're prompted for a password, and none of those are needed if you set up peer auth locally.
Tested on Ubuntu 22.04, PostgreSQL 14.5.
If you want to backup your data or restore data from a backup, you can run the following commands:
To create backup of your data, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type the following command:
pg_dump -FC -U ngb -d ngb -p 5432 >C:\BACK_UP\ngb.090718_after_readUpload.backup
To restore data from a backup, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type below command:
C:\programFiles\postgres\10\bin> pg_restore -Fc -U ngb -d ngb -p 5432 <C:\ngb.130918.backup
Please make sure that the backup file exists.
Follow these 3 steps :
start postgres server - sudo systemctl start postgresql
enable same - sudo systemctl enable postgresql
restore command - pg_restore -h localhost -p 5432 -U postgres -d old_db
assuming that the dump is there in the same directory
Links :
https://www.postgresqltutorial.com/postgresql-restore-database
https://askubuntu.com/questions/50621/cannot-connect-to-postgresql-on-port-5432
I've run the following command on an existing database server:
pg_dump -C -U testuser testdb -h 127.0.0.1 -F t> testdbdump
Now I'm trying to create this testdb on a new server.
I tried to run the following command on the new server:
pg_restore -h 127.0.0.1 testdbdump
I've created the testuser role on the new database server. And then I also tried the following:
pg_restore -i -h 127.0.0.1 -p 5432 -U postgres "testdbdump"
psql template1 postgres -f testdbdump
It did start to do some stuff, but I get a bunch of errors including:
psql:testdbdump:1720: invalid command \N
psql:testdbdump:1721: invalid command \N
psql:testdbdump:1808: ERROR: syntax error at or near "user"
LINE 1: user=phone
^
Did I create the dump file incorrectly?
Look up the --create option of pg_restore. It's made for this purpose.
Locally, I use pgadmin3. On the remote server, however, I have no such luxury.
I've already created the backup of the database and copied it over, but is there a way to restore a backup from the command line? I only see things related to GUI or to pg_dumps.
There are two tools to look at, depending on how you created the dump file.
Your first source of reference should be the man page pg_dump as that is what creates the dump itself. It says:
Dumps can be output in script or
archive file formats. Script dumps are
plain-text files containing the SQL
commands required to reconstruct
the database to the state it was
in at the time it was saved. To
restore from such a script, feed it to
psql(1). Script files can be used
to reconstruct the database even
on other machines and other
architectures; with some modifications
even on other SQL database products.
The alternative archive file formats
must be used with pg_restore(1) to
rebuild the database. They allow
pg_restore to be selective about what
is restored, or even to reorder the
items prior to being restored. The
archive file formats are designed to
be portable across architectures.
So depends on the way it was dumped out. If using Linux/Unix, you can probably figure it out using the excellent file(1) command - if it mentions ASCII text and/or SQL, it should be restored with psql otherwise you should probably use pg_restore.
Restoring is pretty easy:
psql -U username -d dbname < filename.sql
-- For Postgres versions 9.0 or earlier
psql -U username -d dbname -1 -f filename.sql
or
pg_restore -U username -d dbname -1 filename.dump
Check out their respective manpages - there's quite a few options that affect how the restore works. You may have to clean out your "live" databases or recreate them from template0 (as pointed out in a comment) before restoring, depending on how the dumps were generated.
create backup
pg_dump -h localhost -p 5432 -U postgres -F c -b -v -f
"/usr/local/backup/10.70.0.61.backup" old_db
-F c is custom format (compressed, and able to do in parallel with -j N) -b is including blobs, -v is verbose, -f is the backup file name.
restore from backup
pg_restore -h localhost -p 5432 -U postgres -d old_db -v
"/usr/local/backup/10.70.0.61.backup"
important to set -h localhost - option
You might need to be logged in as postgres in order to have full privileges on databases.
su - postgres
psql -l # will list all databases on Postgres cluster
pg_dump/pg_restore
pg_dump -U username -f backup.dump database_name -Fc
switch -F specify format of backup file:
c will use custom PostgreSQL format which is compressed and results in smallest backup file size
d for directory where each file is one table
t for TAR archive (bigger than custom format)
-h/--host Specifies the host name of the machine on which the server is running
-W/--password Force pg_dump to prompt for a password before connecting to a database
restore backup:
pg_restore -d database_name -U username -C backup.dump
Parameter -C should create database before importing data. If it doesn't work you can always create database eg. with command (as user postgres or other account that has rights to create databases) createdb db_name -O owner
pg_dump/psql
In case that you didn't specify the argument -F default plain text SQL format was used (or with -F p). Then you can't use pg_restore. You can import data with psql.
backup:
pg_dump -U username -f backup.sql database_name
restore:
psql -d database_name -f backup.sql
POSTGRESQL 9.1.12
DUMP:
pg_dump -U user db_name > archive_name.sql
put the user password and press enter.
RESTORE:
psql -U user db_name < /directory/archive.sql
put the user password and press enter.
Below is my version of pg_dump which I use to restore the database:
pg_restore -h localhost -p 5432 -U postgres -d my_new_database my_old_database.backup
or use psql:
psql -h localhost -U postgres -p 5432 my_new_database < my_old_database.backup
where -h host, -p port, -u login username, -d name of database
Backup and restore with GZIP
For larger size database this is very good
backup
pg_dump -U user -d mydb | gzip > mydb.pgsql.gz
restore
gunzip -c mydb.pgsql.gz | psql dbname -U user
https://www.postgresql.org/docs/14/backup-dump.html
This worked for me:
pg_restore --verbose --clean --no-acl --no-owner --host=localhost --dbname=db_name --username=username latest.dump
Backup: $ pg_dump -U {user-name} {source_db} -f {dumpfilename.sql}
Restore: $ psql -U {user-name} -d {desintation_db} -f {dumpfilename.sql}
try this:
psql -U <username> -d <dbname> -f <filename>.sql
Restore DB psql from .sql file
Backup & Restore
This is the combo I'm using to backup, drop, create and restore my database (on macOS and Linux):
sudo -u postgres pg_dump -Fc mydb > ./mydb.sql
sudo -u postgres dropdb mydb
sudo -u postgres createdb -O db_user mydb
sudo -u postgres pg_restore -d mydb < ./mydb.sql
Misc
-Fc will compress the database (Format custom)
List PostgreSQL users: sudo -u postgres psql -c "\du+"
You may want to add hostname and date to ./mydb.sql, then change it by:
./`hostname`_mydb_`date +"%Y%m%d_%H%M"`.sql
If you create a backup using pg_dump you can easily restore it in the following way:
Open command line window
Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\9.5\bin"
Enter the command to restore your database. For example: psql.exe -U postgres -d YourDatabase -f D:\Backup\.sql
Type password for your postgres user
Check the restore process
I didnt see here mentions about dump file extension (*.dump).
This solution worked for me:
I got a dump file and needed to recover it.
First I tried to do this with pg_restore and got:
pg_restore: error: input file appears to be a text format dump. Please use psql.
I did it with psql and worked well:
psql -U myUser -d myDataBase < path_to_the_file/file.dump
1. Open the Terminal.
2. Backup your database with following command
your postgres bin -> /opt/PostgreSQL/9.1/bin/
your source database server -> 192.168.1.111
your backup file location and name -> /home/dinesh/db/mydb.backup
your source db name -> mydatabase
/opt/PostgreSQL/9.1/bin/pg_dump --host '192.168.1.111' --port 5432 --username "postgres" --no-password --format custom --blobs --file "/home/dinesh/db/mydb.backup" "mydatabase"
3. Restore mydb.backup file into destination.
your destination server -> localhost
your destination database name -> mydatabase
Create database for restore the backup.
/opt/PostgreSQL/9.1/bin/psql -h 'localhost' -p 5432 -U postgres -c "CREATE DATABASE mydatabase"
Restore the backup.
/opt/PostgreSQL/9.1/bin/pg_restore --host 'localhost' --port 5432 --username "postgres" --dbname "mydatabase" --no-password --clean "/home/dinesh/db/mydb.backup"
1) Open psql terminal.
2) Unzip/ untar the dump file.
3) Create an empty database.
4) use the following command to restore the .dump file
<database_name>-# \i <path_to_.dump_file>
To restore a dump file
psql -d [Dbname] -U [UserName] -p 5432 < [FileLocation]
To restore a .SQL file
pg_restore -U [Username] -d [Dbname] -1 [FileLocation]
If you get user authentication errors, go to the file pg_hba.conf which is in PSQL/data folder in your program files, and change the "METHOD" to "Trust".
Restart you psql serive in windows services(Win + R --> services.msc).
try:
pg_restore -h localhost -p 5432 -U <username> -d <dbname> -1 <filename>
Restoring a postgres backup file depends on how did you take the backup in the first place.
If you used pg_dump with -F c or -F d you need to use pg_restore otherwise you can just use
psql -h localhost -p 5432 -U postgres < backupfile
9 ways to backup and restore postgres databases
As below link said, you can use psql command for restoring the dump file:
https://www.postgresql.org/docs/8.1/static/backup.html#BACKUP-DUMP-RESTORE
psql dbname < infile
if you need to set username just add the username after the command like:
psql dbname < infile username
Sorry for the necropost, but these solutions did not work for me. I'm on postgres 10. On Linux:
I had to change directory to my pg_hba.conf.
I had to edit the file to change method from peer to md5 as stated here
Restart the service: service postgresql-10 restart
Change directory to where my backup.sql was located and execute:
psql postgres -d database_name -1 -f backup.sql
-database_name is the name of my database
-backup.sql is the name of my .sql backup file.
Try to see if the following commands can help you:
sudo su - yourdbuser
psql
\i yourbackupfile
If you have a backup SQL file then you can easily Restore it.
Just follow the instructions, given in the below
1. At first, create a database using pgAdmin or whatever you want (for example my_db is our created db name)
2. Now Open command line window
3. Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\pg10\bin"
4. Enter the following command to restore your database: psql.exe -U postgres -d my_db -f D:\Backup\backup_file_name.sql
Type password for your postgres user if needed and let Postgres to do its work. Then you can check the restore process.
The shortest way with no password prompt
psql "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
If you are using Windows OS
psql.exe "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
I was having authentication problems running pg_dump, so I moved my dump file
mv database_dump /tmp
into the temp directory and then ran
su -u postgres
cd /tmp
pg_restore database_dump
If you have a large database dump, you may just want to create another directory where your current user and the postgres user can access and putting the database dump file into that.
Backup==>
Option1: To take backup along with password in cmd
1.PGPASSWORD="mypassword" pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option2: To take backup without password in cmd
2. pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option3: To take backup as gzip(if database is huge)
3. pg_dump -U postgres -h localhost mydb --inserts | gzip > mydb.gz
Restore:
1. psql -h localhost -d mydb -U postgres -p 5432 < mydb.sql
This solution only works for Windows.
First, ensure you have already added the postgres bin folder to the "Path" environment variable (in my case this folder is C:\Program Files\PostgreSQL\12\bin).
Then, open the Windows command interpreter (cmd), go to the folder where you have the .sql file and execute this command:
pg_restore -U userName -d database-1 backupfile.sql
For example:
pg_restore -U sam -d SamDataBase -1 SamDataBaseBackup.sql
(It can ask you for the password of the user so ensure to type it correctly and then click enter)
Pura vida!
If you have created a new database named mydb, To restore a .sql dump to that database with psql,
psql --file=dump.sql --username=postgres --host=localhost --port=5432 mydb
the password will be prompted by psql
The connection options are
-h, --host=HOSTNAME database server host or socket directory (default: "/var/run/postgresql")
-p, --port=PORT database server port (default: "5432")
-U, --username=USERNAME database user name (default: "xyz")
-w, --no-password never prompt for password
-W, --password force password prompt (should happen automatically)
If you are using docker, this answer may be helpful.
Start the container
docker start <postgres_container_id>
Access bash inside container
docker exec -it <postgres_container_id> bash
Copy the .tar backup file to docker container (In another window)
docker cp postgres_dump.tar <postgres_container_id>:/
Restore the backup
pg_restore -c -U <postgres-user> -d <password> -v "postgres_dump.tar" -W
Enter password
Save and restore the exact same state with compressed dump
Other answers gave all the key bits separately, but hopefully this will provide be the "just works save and restore to exact state" command pair.
Dump to file mydb.psql:
PGPASSWORD=mypassword pg_dump -U my_username -h localhost mydb -Fc -f mydb.psql
Restore:
PGPASSWORD=mypassword pg_restore -U my_username -h localhost \
--clean -d mydb -v mydb.psql
Some of the flags:
-Fc: Format Compressed, as opposed to plaintext.
file tmp.psql says:
tmp.psql: PostgreSQL custom database dump - v1.14-0
--clean: destroy the target DB before restoring it, thus returning to the exact same pristine state.
Any data created after the dump will be lost.
PGPASSWORD, -U and -h can of course be modified depending on your login method, e.g. without PGPASSWORD you're prompted for a password, and none of those are needed if you set up peer auth locally.
Tested on Ubuntu 22.04, PostgreSQL 14.5.
If you want to backup your data or restore data from a backup, you can run the following commands:
To create backup of your data, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type the following command:
pg_dump -FC -U ngb -d ngb -p 5432 >C:\BACK_UP\ngb.090718_after_readUpload.backup
To restore data from a backup, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type below command:
C:\programFiles\postgres\10\bin> pg_restore -Fc -U ngb -d ngb -p 5432 <C:\ngb.130918.backup
Please make sure that the backup file exists.
Follow these 3 steps :
start postgres server - sudo systemctl start postgresql
enable same - sudo systemctl enable postgresql
restore command - pg_restore -h localhost -p 5432 -U postgres -d old_db
assuming that the dump is there in the same directory
Links :
https://www.postgresqltutorial.com/postgresql-restore-database
https://askubuntu.com/questions/50621/cannot-connect-to-postgresql-on-port-5432