I'm trying to use nmap for port scanning some instances and I would like to have it give me some better looking output. I would like to use the -oG or -oN options, however neither seem to work and using gives me the following output:
user#hostname:~$ nmap -oG 1.2.3.4
Starting Nmap 7.30 ( https://nmap.org ) at 2016-10-14 10:36 PDT
WARNING: No targets were specified, so 0 hosts scanned.
Nmap done: 0 IP addresses (0 hosts up) scanned in 0.03 seconds
user#hostname:~$ nmap -oN 1.2.3.4
Starting Nmap 7.30 ( https://nmap.org ) at 2016-10-14 10:36 PDT
WARNING: No targets were specified, so 0 hosts scanned.
Nmap done: 0 IP addresses (0 hosts up) scanned in 0.04 seconds
How do I get it to scan my instance with this option?
The output file options (-oN, -oG, -oX, and -oA) all take a filename argument. Your commands are saying, "Generate grepable output and save it to the file called 1.2.3.4." Then Nmap looks at the rest of the line and sees no target specifications (since it assumed 1.2.3.4 was a filename and not an IP address. This command would work instead: nmap -oG myscan.gnmap 1.2.3.4
Related
I compiled U-Boot (#v2022.01-rc1) with untouched rpi_4_defconfig. The U-Boot loads into shell successfuly, however
entering this sequence of commands will get stuck on "Starting kernel ...":
setenv serverip 192.168.0.1
setenv ipaddr 192.168.0.10
setenv kernel_comp_addr_r 0x0A000000
setenv kernel_comp_size 7921972
tftp ${kernel_addr_r} kernel8.img
tftp ${fdt_addr_r} bcm2711-rpi-4-b.dtb
booti ${kernel_addr_r} - ${fdt_addr_r} // Gets stuck at Starting kernel...
However, if I replace ${fdt_addr_r} with ${fdt_addr} in booti command it will load the kernel successfully. Like this:
booti ${kernel_addr_r} - ${fdt_addr} // Works fine
What is the difference between ${fdt_addr_r} and ${fdt_addr}? Why doesn't my first approach work? Why does ${fdt_addr} work?
DEBUG INFO:
RPi firmware boot logs:
Read start4.elf bytes 2228768 hnd 0x00000072
Read fixup4.dat bytes 5446 hnd 0x00000067
Firmware: d7f29d96450abfc77cd6cf011af1faf1e03e5e56 Apr 30 2021 13:45:52
0x00c03112 0x00000000 0x000000ff
MEM GPU: 76 ARM: 948 TOTAL: 1024
Starting start4.elf # 0xfec00200 partition 0
PCI reset
+
MESS:00:00:05.184648:0: arasan: arasan_emmc_open
MESS:00:00:05.332928:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:05.335639:0: brfs: File read: 81 bytes
MESS:00:00:05.402894:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:05.421071:0: brfs: File read: 81 bytes
MESS:00:00:05.902232:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
MESS:00:00:05.909524:0: *** Restart logging
MESS:00:00:05.914477:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
MESS:00:00:05.923831:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
MESS:00:00:05.929762:0: HDMI0: hdmi_pixel_encoding: 300000000
MESS:00:00:05.935229:0: HDMI1: hdmi_pixel_encoding: 300000000
MESS:00:00:05.945421:0: dtb_file 'bcm2711-rpi-4-b.dtb'
MESS:00:00:05.952218:0: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
MESS:00:00:05.955466:0: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc2a9
MESS:00:00:05.974659:0: brfs: File read: 49833 bytes
MESS:00:00:06.039897:0: brfs: File read: /mfs/sd/config.txt
MESS:00:00:06.042389:0: brfs: File read: 81 bytes
MESS:00:00:06.047663:0: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo
MESS:00:00:06.067534:0: Loaded overlay 'disable-bt'
MESS:00:00:06.107041:0: brfs: File read: 1073 bytes
MESS:00:00:06.108885:0: Failed to open command line file 'cmdline.txt'
MESS:00:00:07.249713:0: brfs: File read: /mfs/sd/u-boot.bin
MESS:00:00:07.252181:0: Loading 'u-boot.bin' to 0x80000 size 0x8f720
MESS:00:00:07.258265:0: Device tree loaded to 0x2eff3800 (size 0xc743)
MESS:00:00:07.266568:0: uart: Set PL011 baud rate to 103448.300000 Hz
MESS:00:00:07.273628:0: uart: Baud rate change done...
MESS:00:00:07.275688:0: uart: Baud rate change done...
MESS:00:00:07.281220:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
U-Boot log:
U-Boot 2022.01-rc1 (Nov 11 2021 - 15:59:50 +0100)
DRAM: 3.9 GiB
RPI 4 Model B (0xc03112)
MMC: mmcnr#7e300000: 1, mmc#7e340000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial
Out: serial
Err: serial
Net: eth0: ethernet#7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 2
U-boot environment (without entering any commands, or modifying env in any way):
arch=arm
baudrate=115200
board=rpi
board_name=4 Model B
board_rev=0x11
board_rev_scheme=1
board_revision=0xC03112
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_net_usb_start=usb start
boot_pci_enum=pci enum
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=mmc0 mmc1 usb0 pxe dhcp
bootcmd=run distro_bootcmd
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; run boot_pci_enum; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; run boot_pci_enum; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
cpu=armv8
dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;config.txt fat 0 1;Image fat 0 1
dhcpuboot=usb start; dhcp u-boot.uimg; bootm
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
ethaddr=dc:a6:32:5f:91:f4
fdt_addr=2eff3800
fdt_addr_r=0x02600000
fdt_high=ffffffffffffffff
fdtcontroladdr=3af44630
fdtfile=broadcom/bcm2711-rpi-4-b.dtb
initrd_high=ffffffffffffffff
kernel_addr_r=0x00080000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x1000000
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
preboot=pci enum; usb start;
pxefile_addr_r=0x02500000
ramdisk_addr_r=0x02700000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x02400000
serial#=100000009b911a03
soc=bcm283x
stderr=serial,vidconsole
stdin=serial,usbkbd
stdout=serial,vidconsole
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
usbethaddr=dc:a6:32:5f:91:f4
vendor=raspberrypi
Environment size: 4113/16380 bytes
U-boot process of entering commands and booting the kernel:
U-Boot> setenv serverip 192.168.0.1
U-Boot> setenv ipaddr 192.168.0.10
U-Boot> setenv kernel_comp_addr_r 0x0A000000
U-Boot> setenv kernel_comp_size 7921972
U-Boot> tftp ${kernel_addr_r} kernel8.img
Using ethernet#7d580000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'kernel8.img'.
Load address: 0x80000
Loading: *################################################## 7.6 MiB
13.9 MiB/s
done
Bytes transferred = 7921972 (78e134 hex)
U-Boot> tftp ${fdt_addr_r} bcm2711-rpi-4-b.dtb
Using ethernet#7d580000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'bcm2711-rpi-4-b.dtb'.
Load address: 0x2600000
Loading: *################################################## 48.7 KiB
5.3 MiB/s
done
Bytes transferred = 49833 (c2a9 hex)
U-Boot> booti ${kernel_addr_r} - ${fdt_addr_r}
Uncompressing Kernel Image
Moving Image from 0x80000 to 0x200000, end=17f0000
## Flattened Device Tree blob at 02600000
Booting using the fdt blob at 0x2600000
Using Device Tree in place at 0000000002600000, end 000000000260f2a8
Starting kernel ... // <------ !!!! stuck here forever
Regarding ${fdt_addr} and ${fdt_addr_r}:
The u-boot rpi_4_defconfig configures CONFIG_OF_BOARD. By this option u-boot does not use its own device tree, but it receives the device tree which is provided by the eeprom bootloader of the Raspberry Pi 4. The RPi bootloader already prepares the device tree depending on the options in the file config.txt of the boot partition, including dt-overlays and including bootargs specified in cmdline.txt.
So the device tree located at address ${fdt_addr} is the device tree prepared by the Raspberry Pi bootloader. This might be the reason why booting using ${fdt_addr} works. As a consequence, you don't have to necessarily prepare and load a device tree on your own on the Raspberry Pi. You could just reuse ${fdt_addr} in the u-boot booti command as it is already loaded.
If you choose to load your own device tree, compare its contents with the configuration in config.txt (especially the dtoverlay=..). Also check cmdline.txt for bootargs. In your u-boot command list you did not set any bootargs with setenv bootargs ....
As mentioned by sawdust you could use setenv bootargs 'earlycon=uart8250,mmio32,0xfe215040 console=serial0,115200 ...' for getting debug infos on the miniuart serial line.
When I try to use the following
nmap -p 443 -Pn --script=ssl-cert ip_address
I get the following error:
Starting Nmap 7.70 ( https://nmap.org ) at 2019-06-04 15:20 UTC
NSE: failed to initialize the script engine:
could not locate nse_main.lua
stack traceback:
[C]: in ?
QUITTING!
the response for nmap --version
is
Nmap version 7.70 ( https://nmap.org )
Platform: x86_64-alpine-linux-musl
Compiled with: liblua-5.3.5 openssl-1.1.1a libssh2-1.8.0 libz-1.2.11 libpcre-8.42 libpcap-1.9.0-PRE-GIT nmap-libdnet-1.12 ipv6
Compiled without:
Available nsock engines: epoll poll select
You need to install the package nmap-scripts as well, as this is not installed automatically on Alpine (see here).
So simply run apk add nmap-scripts or add it to your dockerfile.
The setup: An automated test station, built around a Windows 7 PC. The UUT (Unit Under Test) are connected and disconnected often, creating many COM ports.
The Problem: The test is searching for the device at a specific COM port, requiring the user to manually remove the "ghost" com ports.
The question: Since the software is used by several test stations in parallel, at a production floor, I cannot install additional software (e.g. Devcon, part of Windows SDK). Is there a command line option to remove the COM ports?
Based on This blog entry
The only thing that actually worked for me is not the intended solution... But it fit the case at hand:
Created a batch file at C:\windows\system32
The content:
REG ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\COM Name Arbiter" /v ComDB /t REG_BINARY /d 0206 /f
The actual value of the registry key (0206 in my example) can either be read from that key (use regedit) or calculated from binary:
com8 com7 com6 com5 com4 com3 com2 com1 com16 com15 com14 com13 com12 com11 com10 com9
0 0 0 0 0 0 1 1 0 0 0 0 0 1 1 0
since I wished to keep com1, com2, com10 and com11 - 0000 0011 0000 0110 - which stand for 0206
executing this batch file will remove the unnecessary comports while leaving the one's I intended
*The batch should be at system32 to be executed as elevated (administrator)
*for more details refer to this PDF
I want to run rdiff-backup and then switch of the raspberrypi it was running on.
I use the following script:
#!/bin/sh
date > /home/mik/rdiff-backup.log
echo "rsync start" >> /home/mik/rdiff-backup.log
rdiff-backup -v5 --print-statistics offlinebackup#server::/srv/backup /srv/datenserverBackup/backup >> /home/mik/rdiff-backup.log 2>&1
sync
date >> /home/mik/rdiff-backup.log
echo "rdiff-backup end" >> /home/mik/rdiff-backup.log
df -h >> /home/mik/rdiff-backup.log
sync
halt
The log file looks good (for the rdiff-backup part):
Sat 12 Aug 08:20:59 UTC 2017
rsync start
Unable to import win32security module. Windows ACLs
not supported by filesystem at /srv/backup
escape_dos_devices not required by filesystem at /srv/backup
Warning: name offlinebackup not found on system, dropping ACL entry.
Further ACL entries dropped with this name will not trigger further warnings
Using rdiff-backup version 1.2.8
Executing ssh -C offlinebackup#server rdiff-backup --server
-----------------------------------------------------------------
Detected abilities for source (read only) file system:
Access control lists On
Extended attributes On
Windows access control lists Off
Case sensitivity On
Escape DOS devices Off
Escape trailing spaces Off
Mac OS X style resource forks Off
Mac OS X Finder information Off
-----------------------------------------------------------------
Unable to import win32security module. Windows ACLs
not supported by filesystem at /srv/datenserverBackup/backup/rdiff-backup-data/rdiff-backup.tmp.0
escape_dos_devices not required by filesystem at /srv/datenserverBackup/backup/rdiff-backup-data/rdiff-backup.tmp.0
-----------------------------------------------------------------
Detected abilities for destination (read/write) file system:
Ownership changing On
Hard linking On
fsync() directories On
Directory inc permissions On
High-bit permissions On
Symlink permissions Off
Extended filenames On
Windows reserved filenames Off
Access control lists On
Extended attributes On
Windows access control lists Off
Case sensitivity On
Escape DOS devices Off
Escape trailing spaces Off
Mac OS X style resource forks Off
Mac OS X Finder information Off
-----------------------------------------------------------------
Backup: must_escape_dos_devices = 0
Starting increment operation /srv/backup to /srv/datenserverBackup/backup
Processing changed file .
Incrementing mirror file /srv/datenserverBackup/backup
Processing changed file abc
Incrementing mirror file /srv/datenserverBackup/backup/abc
Processing changed file abc/def
Incrementing mirror file /srv/datenserverBackup/backup/abc/def
Processing changed file abc/def/testfile.dxf
Incrementing mirror file /srv/datenserverBackup/backup/abc/def/testfile.dxf
--------------[ Session statistics ]--------------
StartTime 1502526061.00 (Sat Aug 12 08:21:01 2017)
EndTime 1502527913.72 (Sat Aug 12 08:51:53 2017)
ElapsedTime 1852.72 (30 minutes 52.72 seconds)
SourceFiles 151099
SourceFileSize 386321558216 (360 GB)
MirrorFiles 151097
MirrorFileSize 386321447731 (360 GB)
NewFiles 2
NewFileSize 110485 (108 KB)
DeletedFiles 0
DeletedFileSize 0 (0 bytes)
ChangedFiles 1
ChangedSourceSize 0 (0 bytes)
ChangedMirrorSize 0 (0 bytes)
IncrementFiles 4
IncrementFileSize 0 (0 bytes)
TotalDestinationSizeChange 110485 (108 KB)
Errors 0
--------------------------------------------------
The backup is working, but then the script ends right there.
rdiff-backup.log contains the full report of rdiff-backup. But neither the line "rdiff-backup end", nor the output of "df -h".
How can I make it ran to the end?
Thanks for your answers
I finally found a workaround, that solves my problem.
My sciprt which is called after booting from /etc/init.d is calling the other script which does the actual work (i.e. backup my data, and write the log file) as a background task.
/etc/init.d/CallAfterBoot.sh
#!/bin/sh
sleep 30
/home/me/DoBackup.sh & # '&' starts the script in background
/home/me/DoBackup.sh is the script I posted above which is now runing correctly.
Same script running as the same user now behaves differently. There's got to be some bug somewhere, however, it works for me now.
I have 2 PIs with ip 192.168.0.2 and 192.168.0.3. I can password-less ssh to each pi. (I used to have 3001 for ssh port, but now I change it back to 22)
I follow tinkernut's pi cluster tutorial: https://www.tinkernut.com/2014/05/make-cluster-computer-part-2/
I stuck in this part of tutorial: "mpiexec -f machinefile -n 4 hostname"
My command is simply "mpiexec -f machinefile -n 2 hostname"
After running my simple command, the output is:
pi01 (works!)
when it tries to reach pi02, the errors are
host: 192.168.0.2
host: 192.168.0.3
==================================================================================================
mpiexec options:
----------------
Base path: /home/rpimpi/mpi-install/bin/
Launcher: (null)
Debug level: 1
Enable X: -1
Global environment:
-------------------
MAIL=/var/mail/pi
USER=pi
SHLVL=1
HOME=/home/pi
OLDPWD=/home/pi/misc
HUSHLOGIN=FALSE
L1=tty1
LOGNAME=pi
_=./test.sh
TERM=linux
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games:/home/rpimpi/mpi-install/bin
LANG=en_GB.UTF-8
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:
SHELL=/bin/bash
PWD=/home/pi/misc/test
Hydra internal environment:
---------------------------
GFORTRAN_UNBUFFERED_PRECONNECTED=y
Proxy information:
*********************
[1] proxy: 192.168.0.2 (1 cores)
Exec list: hostname (1 processes);
[2] proxy: 192.168.0.3 (1 cores)
Exec list: hostname (1 processes);
==================================================================================================
[mpiexec#pi01] Timeout set to -1 (-1 means infinite)
[mpiexec#pi01] Got a control port string of 192.168.0.2:39681
Proxy launch args: /home/rpimpi/mpi-install/bin/hydra_pmi_proxy --control-port 192.168.0.2:39681 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id
Arguments being passed to proxy 0:
--version 3.1.4 --iface-ip-env-name MPIR_CVAR_CH3_INTERFACE_HOSTNAME --hostname 192.168.0.2 --global-core-map 0,1,2 --pmi-id-map 0,0 --global-process-count 2 --auto-cleanup 1 --pmi-kvsname kvs_2638_0 --pmi-process-mapping (vector,(0,2,1)) --ckpoint-num -1 --global-inherited-env 15 'MAIL=/var/mail/pi' 'USER=pi' 'SHLVL=1' 'HOME=/home/pi' 'OLDPWD=/home/pi/misc' 'HUSHLOGIN=FALSE' 'L1=tty1' 'LOGNAME=pi' '_=./test.sh' 'TERM=linux' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games:/home/rpimpi/mpi-install/bin' 'LANG=en_GB.UTF-8' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'SHELL=/bin/bash' 'PWD=/home/pi/misc/test' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 1 --exec --exec-appnum 0 --exec-proc-count 1 --exec-local-env 0 --exec-wdir /home/pi/misc/test --exec-args 1 hostname
Arguments being passed to proxy 1:
--version 3.1.4 --iface-ip-env-name MPIR_CVAR_CH3_INTERFACE_HOSTNAME --hostname 192.168.0.3 --global-core-map 0,1,2 --pmi-id-map 0,1 --global-process-count 2 --auto-cleanup 1 --pmi-kvsname kvs_2638_0 --pmi-process-mapping (vector,(0,2,1)) --ckpoint-num -1 --global-inherited-env 15 'MAIL=/var/mail/pi' 'USER=pi' 'SHLVL=1' 'HOME=/home/pi' 'OLDPWD=/home/pi/misc' 'HUSHLOGIN=FALSE' 'L1=tty1' 'LOGNAME=pi' '_=./test.sh' 'TERM=linux' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games:/home/rpimpi/mpi-install/bin' 'LANG=en_GB.UTF-8' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'SHELL=/bin/bash' 'PWD=/home/pi/misc/test' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 1 --exec --exec-appnum 0 --exec-proc-count 1 --exec-local-env 0 --exec-wdir /home/pi/misc/test --exec-args 1 hostname
[mpiexec#pi01] Launch arguments: /home/rpimpi/mpi-install/bin/hydra_pmi_proxy --control-port 192.168.0.2:39681 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 0
[mpiexec#pi01] Launch arguments: /usr/bin/ssh -x 192.168.0.3 "/home/rpimpi/mpi-install/bin/hydra_pmi_proxy" --control-port 192.168.0.2:39681 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 1
pi01
[mpiexec#pi01] control_cb (/home/pi/Downloads/mpich3/mpich-3.1.4/src/pm/hydra/pm/pmiserv/pmiserv_cb.c:200): assert (!closed) failed
[mpiexec#pi01] HYDT_dmxu_poll_wait_for_event (/home/pi/Downloads/mpich3/mpich-3.1.4/src/pm/hydra/tools/demux/demux_poll.c:76): callback returned error status
[mpiexec#pi01] HYD_pmci_wait_for_completion (/home/pi/Downloads/mpich3/mpich-3.1.4/src/pm/hydra/pm/pmiserv/pmiserv_pmci.c:198): error waiting for event
[mpiexec#pi01] main (/home/pi/Downloads/mpich3/mpich-3.1.4/src/pm/hydra/ui/mpich/mpiexec.c:344): process manager error waiting for completion
Research I done so far:
https://stackoverflow.com/questions/27419782/error-while-executing-mpi
mpiexec checkpointing error (RPi)
MPICH example cpi generates error when it runs on multiple fresh installed vps
I realized that I don’t use switch to connect all PIs, instead of I use wifi dongle for each PI. I ssh to the PI1 itself, this forces to add to know_hosts under .ssh. I did this to PI2 as well. Now I am able exeucte this command: “mpiexec -f machinefile -n 2 hostname”. It outputs “pi01” and “pi02”. If it is still not working, I recommend you back up your .ssh and regenerate a new one.
http://kenpeter.github.io/raspberry/pi/2015/07/13/control-cb-assert-failed.html