I have the following code:
//******************************************
//PROC01 EXEC PGM=IEBGENER
//SYSIN DD DUMMY
//SYSPRINT DD SYSOUT=*
//SYSUT2 DD SYSOUT=(B,SMTP)
//SYSUT1 DD *
RCPT TO:<MAIL#AR.TEST.COM>
DATA
SOME TEXT GOES HERE
Can I attach a dataset/file into the mail? Thanks.
Try something like:
//******************************************
//PROC01 EXEC PGM=IEBGENER
//EMAIL OUTPUT DEST=EMAIL,
// USERDATA=('FILENAME:attachment.txt',
// 'TO:<MAIL#AR.TEST.COM>',
// 'FILEDESC:Sent from MVS'),
// TITLE=('Sent from MVS'),
// MAILFROM=('<YOURMAIL#AR.TEST.COM>'),
// REPLYTO=('<YOURMAIL#AR.TEST.COM>')
//SYSIN DD DUMMY
//SYSPRINT DD SYSOUT=*
//SYSUT2 DD SYSOUT=Z,OUTPUT=*.EMAIL
//SYSUT1 DD DISP=SHR,DSN=<DSNNAME>
or, if you would like the attachment to be a PDF, something like:
//******************************************
//PROC01 EXEC PGM=IEBGENER
//EMAIL OUTPUT DEST=EMAILPDF,
// USERDATA=('FILENAME:attachment.pdf',
// 'TO:<MAIL#AR.TEST.COM>',
// 'PDFPGSIZ=(826,1169)',
// 'PDFFONT=(COURIER,8)',
// 'FILEDESC:Sent from MVS'),
// TITLE=('Sent from MVS'),
// MAILFROM=('<YOURMAIL#AR.TEST.COM>'),
// REPLYTO=('<YOURMAIL#AR.TEST.COM>')
//SYSIN DD DUMMY
//SYSPRINT DD SYSOUT=*
//SYSUT2 DD SYSOUT=Z,OUTPUT=*.EMAIL
//SYSUT1 DD DISP=SHR,DSN=<DSNNAME>
Hope this works for you :)
You should be able to just add card:
// DD DSN=,DISP=SHR
to the end of your existing job. We use this style all the time. Using the OUTPUT card is also an option, as previously noted.
Related
I'm getting JCL error 838 and the error messages I'm seeing are: "IEFC006I Positional parameters must be specified before keyword parameter" and "IEFC001I Procedure comp was expanded using instream procedure definiti"
This is what I've typed up:
//TSOZA601 JOB 3ES10G10000012,'TSOZA60',MSGCLASS=Q,MSGLEVEL=(1,1),
// NOTIFY=TSOZA60,CLASS=A,REGION=2M
//COMP PROC
//*****
//***** MAKE BACKUP
//*****
//S1 EXEC PGM=IEBCOPY
//SYSPRINT1 DD SYSOUT=*
//SYSUT1 DD DISP=SHR,DSN=TSOZA60.ES10.CNTL
//SYSUT2 DD DISP=(,CATLG),DSN=TSOZA60.ES10.BACK,
// LIKE=TSOZA60.ES10.CNTL
//SYSIN DD DUMMY
//IFOK1 IF (S1.RC=0) THEN
//*****
//***** COMPRESS DATASET
//*****
//S2 EXEC PGM=IEBCOPY
//SYSPRINT DD SYSOUT=*
//SYSUT1 DD DISP=SHR,DSN=TSOZA60.ES10.CNTL
//SYSUT2 DD DISP=OLD,DSN=TSOZA60.ES10.CNTL
//SYSIN DD DUMMY
//IFOKEND1 ENDIF
//IFOK2 IF (S2.RC=0) THEN
//*****
//***** COMPRESS SUCCESSFUL, DELETE BACKUP
//*****
//S3 EXEC PGM=IEFBR14
//DD1 DD DISP=(OLD,DELETE),DSN=TSOZA60.ES10.BACK
//IFOKEND2 ENDIF
// PEND
//FINAL EXEC COMP
//S1.SYSUT1 DD DSN=TSOZA60.COPY.CNTL
//S1.SYSUT2 DD DSN=TSOZA60.ES10.BACK
//S2.SYSUT1 DD DSN=TSOZA60.COPY.CNTL
//S2.SYSUT2 DD DSN=TS0ZA60.COPY.CNTL
//S3.DD1 DD DSN=TSOZA60.ES10.BACK
I write jcl 4 dbdgen:
//C EXEC PGM=ASMA90,REGION=8M,
// PARM=(OBJECT,NODECK,NODBCS,'SIZE(MAX,ABOVE)')
//SYSIN DD DSN=USER19.DBDSRC(LIBDBD),DISP=SHR
//SYSLIB DD DSN=DFSD10.SDFSMAC,DISP=SHR
//SYSLIN DD UNIT=SYSDA,DISP=(,PASS),
// SPACE=(80,(100,100),RLSE),
// DCB=(BLKSIZE=80,RECFM=F,LRECL=80)
//SYSPRINT DD SYSOUT=*
//SYSUT1 DD UNIT=SYSDA,DISP=(,DELETE),
// SPACE=(CYL,(10,5))
//L EXEC PGM=HEWL,PARM='XREF,LIST',
// COND=(0,LT,C),REGION=120K
//SYSLIN DD DSN=*.C.SYSLIN,DISP=(OLD,DELETE)
//SYSPRINT DD SYSOUT=*
//SYSLMOD DD DISP=SHR,
// DSN=USER19.DBDLIB(LIBDBD)
//SYSUT1 DD UNIT=(SYSDA,SEP=(SYSLMOD,SYSLIN)),
// SPACE=(1024,(100,10),RLSE),DISP=(,DELETE)
And have 8 rc.
I think, that it is problem with asma, am i right?
Have anybody any ideas to repair my programm?>
I have to make a new member in a JCL. This isn't a problem:
My code:
//STEP1 EXEC PGM=IEBGENER
//SYSUT1 DD *
//SYSUT2 DD DISP=(NEW,KEEP),UNIT=SYSALLDA,DSN=name.JCL4(MEMBER),
SPACE=(CYL,(1,1,45)),
VOL=SER=DMTU01
//SYSPRINT DD SYSOUT=*
//SYSIN DD DUMMY
/*
But I want that my MEMBER1 contains text.
So when I go in JCL4 and I press an e (edit) before MEMBER, I want to see some text like 'Hallo'. Can someone help me to explain how to do this?
If you are creating a new member in an existing JCL dataset, Try:
//STEP1 EXEC PGM=IEBGENER
//SYSUT1 DD *
Hello
/*
//SYSUT2 DD DSN=name.JCL4(MEMBER),DISP=(SHR,KEEP)
//SYSIN DD DUMMY
/*
The Disp refers to the dataset and not the member. so if the dataset already exists, you do not need to create it !!.
If you want create a new JCL dataset and a member at the same time,
the JCL should be like (where you catlg the dataset)
//STEP1 EXEC PGM=IEBGENER
//SYSUT1 DD *
Hello
/*
//SYSUT2 DD DSN=name.JCL4(MEMBER),DISP=(NEW,CATLG),
// UNIT=SYSALLDA, should this be sysda ???
// SPACE=(CYL,(1,1,45)),
// VOL=SER=DMTU01
//SYSIN DD DUMMY
/*
I am trying to understand where I am going wrong in my JCL file.
Here is my code as follows:
//MULTG013 JOB 1,NOTIFY=&SYSUID
//STEP1 EXEC PGM=ICEGENER
//SYSUT1 DD DSN=UNTG013.DATAIN(AUTODATA),DISP=SHR
//SYSUT2 DD DSN=UNTG013.DATAOUT(MULTIOUT),DISP=SHR
//SYSPRINT DD SYSOUT=*
//SYSIN DD DUMMY
//STEP2 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//SYSIN DD *
DELETE UNTG013.DATAIN(AUTONEW)
/*
//STEP3 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//OLDINV DD DSN=UNTG013.DATAIN(AUTODATA),DISP=SHR
//NEWINV DD DSN=UNTG013.DATAIN(AUTONEW),DISP=SHR
//SYSIN DD *
REPRO INFILE(OLDINV) OUTFILE(NEWINV)
/*
//STEP4 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//STUFF DD DSN=UNTG013.DATAIN(AUTONEW),DISP=SHR
//SYSIN DD *
PRINT INFILE(STUFF) CHAR
/*
//STEP5 EXEC PGM=IKJEFT01
//SYSPRINT DD SYSOUT=*
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD *
RENAME 'UNTG013.DATAIN(AUTONEW)' 'UNTG013.DATAIN(ITDSDATA)'
/*
//STEP6 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//STUFF DD DSN=UNTG013.DATAIN(ITDSDATA),DISP=SHR
//SYSIN DD *
PRINT INFILE(STUFF) CHAR
/*
//STEP7 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//SYSIN DD *
DELETE UNTG013.DATAIN(ITDSDATA)
/*
//
The error I am getting on the SYS Z is: IEFC605I UNIDENTIFIED OPERATION FIELD, lines 17 & 25.
Not quite sure how it is incorrect. Thanks
OK. Here is the message from spool:
SDSF OUTPUT DISPLAY MULTG013 JOB02122 DSID 4 LINE NOT PAGE MODE DATA
COMMAND INPUT ===> SCROLL ===> PAGE
***************** TOP OF DATA ******************
STMT NO. MESSAGE
17 IEFC605I UNIDENTIFIED OPERATION FIELD
25 IEFC605I UNIDENTIFIED OPERATION FIELD
**************** BOTTOM OF DATA ****************
also just found this as well.
SDSF OUTPUT DISPLAY MULTG013 JOB02122 DSID 2 LINE NOT PAGE MODE DATA
COMMAND INPUT ===> SCROLL ===> PAGE
***************** TOP OF DATA ******************
J E S 2 J O B L O G -- S Y S T E M S 0 W 1 -- N O D E
17.59.22 JOB02122 ---- FRIDAY, 28 MAR 2014 ----
17.59.22 JOB02122 IRR010I USERID UNTG013 IS ASSIGNED TO THIS JOB.
17.59.22 JOB02122 IEFC452I MULTG013 - JOB NOT RUN - JCL ERROR 415
------ JES2 JOB STATISTICS ------
41 CARDS READ
45 SYSOUT PRINT RECORDS
0 SYSOUT PUNCH RECORDS
2 SYSOUT SPOOL KBYTES
0.00 MINUTES EXECUTION TIME
**************** BOTTOM OF DATA ****************
Hope this helps and thanks for the input thus far! I am still looking into it as well to see if I can figure it out on my own.
When looking at the source of your JCL as posted on SO I see TABs between //STUFF and DD in the two STUFF-lines. If they are there in your original JCL as well try replacing them by spaces. With JCL Blanks and TABs are not interchangeable.
I tried to run this following JCL program using IBM z/OS
//PAYMENT JOB MSGCLASS=H
//PAYMENT EXEC PGM=PAYMENT,REGION=1024K
// PARM='CSQ1,CARD.PAYMENTS,IND0163.REPLY,IND0163
// 5999.99,"MY PAYMENT"'
//STEPLIB DD DSN=ZOS.CONTEST3.PART2.LOAD,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQLOAD,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQANLE,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQAUTH,DISP=SHR
//STDOUT DD SYSOUT=*
//STDERR DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
but after submission of the job ,when I'm trying to view the job output using SDSF , I'm getting IEFC605I UNIDENTIFIED OPERATION FIELD on line 3 and 4 !! can anyone tell me what's wrong with my program ...
Try ending lines 2 and 3 with a comma so the JCL reader knows that these lines are not yet complete (ie. continue on the following line).
//PAYMENT JOB MSGCLASS=H
//PAYMENT EXEC PGM=PAYMENT,REGION=1024K, <== continued...
// PARM='CSQ1,CARD.PAYMENTS,IND0163.REPLY,IND0163, <== continued...
// 5999.99,"MY PAYMENT"'
//STEPLIB DD DSN=ZOS.CONTEST3.PART2.LOAD,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQLOAD,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQANLE,DISP=SHR
// DD DSN=WMQ.V6R0.SCSQAUTH,DISP=SHR
//STDOUT DD SYSOUT=*
//STDERR DD SYSOUT=*
//SYSPRINT DD SYSOUT=*