akka http, charset header, utf-8 issue - scala

I have this route:
path("rus") {
complete("Привет!")
}
When i go /rus with browser (chrome) i get this output:
"Привет!"
Why? Response headers are:
HTTP/1.1 200 OK
Server: akka-http/2.4.10
Date: Mon, 10 Oct 2016 22:31:53 GMT
Content-Type: application/json
Content-Length: 15
I used to use spray but now i want akka http, i didn't face an issue like this one.
When i curl this path i get normal output
$ curl http://localhost:9010/rus
"Привет!"
I see that response header 'Content-Type' shoud be 'application/json;charset=utf-8' but charset is missing...

I found method withParams. Now it works
HttpEntity(ContentType(MediaTypes.`application/json`.withParams(Map("charset" -> "utf-8"))), "Привет".getBytes("UTF-8"))

Unfortunately, this is a bug in chromium. The charset parameter must be ignored for the application/json content-type according to its IANA registration:
Note: No "charset" parameter is defined for this registration.
Adding one really has no effect on compliant recipients.

Related

sapui5 OData.V4.oDataModel with Teiid 11.2 / Wildfly

I am trying to use SAPUI5 in a SPA to display data from a TEIID/Wildfly ODataV4 service. When SAPUI5 ODATA V4 data model is bound to the service, I run into several errors. I thereby connect via proxy (grunt-connect-proxy2) to the odata service. Basic Auth works. The metadata file above the marked service folder in the attached image (screenshot1) is the actual metadata file of the service which, as you can see, is loaded correctly. So no CORS issue or authorization issue.
Screenshot1
The issue seems to be related to an CSRF Token request as far as I understand. Seems that Teiid/Wildfly is not answering the CSRF Token fetch request. Is there a way to configure Wildfly to answer the request or alternatively a way to disable CSRF requests for the odata V4 model? I have seen such an option in the constructor of the odata V2 model. How could a working configuration look like?
The following is a screenshot from the browser log:
I observed a further issue, from which I do not know if it is related to the previous one (there is also a X-CSRF-Token: Fetch involved), or if a have something more missing somewhere. The second issue happens when I use an aggregation binding to bind a odata collection to a sapui5 list. The response looks like
Request URL: http://localhost:9001/odata4/svc/my_nutri_diary/$batch
Request Method: POST Status Code: 406 Not Acceptable Remote Address:
[::1]:9001 Referrer Policy: no-referrer-when-downgrade Response
Headersview source access-control-allow-credentials: true
access-control-allow-origin: http://localhost:9001 cache-control:
no-cache, no-store, must-revalidate connection: close
content-encoding: gzip content-length: 125 content-type:
application/json;odata.metadata=minimal date: Mon, 12 Nov 2018
20:04:30 GMT expires: 0 odata-version: 4.0 pragma: no-cache server:
WildFly/11 x-powered-by: Undertow/1 Request Headersview source Accept:
multipart/mixed Accept-Encoding: gzip, deflate, br Accept-Language: de
Authorization: Basic SU1TVXNlcjpJTVM0Zm9ydW0l Connection: keep-alive
Content-Length: 329 Content-Type: multipart/mixed;
boundary=batch_id-1542053070786-11 Cookie: sidebar_collapsed=false;
cycle_analytics_help_dismissed=1;
__utmz=111872281.1539128843.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); __utma=111872281.767670437.1539128843.1541866362.1541870562.42 DNT: 1 Host: localhost:9001 MIME-Version: 1.0 OData-MaxVersion: 4.0
OData-Version: 4.0 Origin: http://localhost:9001 Referer:
http://localhost:9001/ User-Agent: Mozilla/5.0 (iPhone; CPU iPhone OS
11_0 like Mac OS X) AppleWebKit/604.1.38 (KHTML, like Gecko)
Version/11.0 Mobile/15A372 Safari/604.1 X-CSRF-Token: Fetch
X-Requested-With: XMLHttpRequest Request Payload
--batch_id-1542053070786-11 Content-Type:application/http Content-Transfer-Encoding:binary GET Profile?$skip=0&$top=100 HTTP/1.1
Accept:application/json;odata.metadata=minimal;IEEE754Compatible=true
Accept-Language:de
Content-Type:application/json;charset=UTF-8;IEEE754Compatible=true
--batch_id-1542053070786-11--
Thanks for your advice!
Best regards,
Christoph
Further note regarding search for a workaround: As I am currently searching for a workaround to be able to use the odata.v4 model, I found the following blog post:
https://blogs.sap.com/2015/08/05/disable-csrf-token-for-odata-calls-using-sap-netweaver-gateway/
However, the approach does not seem to work for the odata.v4 model as it has a different interface. There is no setHeaders() function to set custom headers on the datamodel. I therefore tried to set the header up via
$.ajaxSetup({headers: {'X-Requested-With': 'X'}});
Unfortunately, this also does not work. If someone has the odata.v4 Model running with TEIID or Olingo v4 it would be great if he could give me a feedback on how he had worked around this issue.

Getting 400 Bad request while acquiring AudienceCountsV2 in Linkedin API

I am using the LinkedIn API V2 and I am trying to query the AudienceCountsV2 from my company profile. I am using the following tutorial to build the request:
https://developer.linkedin.com/docs/guide/v2/ads/audience-counts#targetingCriteriaV2
This is the request information:
GET /v2/audienceCountsV2?q=targetingCriteriaV2&targetingCriteria=(include:(and:List((or:(urn%3Ali%3AadTargetingFacet%3Alocations:List(urn%3Ali%3AcountryGroup%3Ana))),(or:(urn%3Ali%3AadTargetingFacet%3Askills:List(urn%3Ali%3Askill%3A17)))))) HTTP/1.1
Host: api.linkedin.com
X-Restli-Protocol-Version: 2.0.0
Authorization: Bearer XXXXXXX
Cache-Control: no-cache
This is the response information:
HTTP/1.1 400 Bad Request
x-restli-gateway-error:"true"
content-type:"application/json"
date:"Wed, 12 Sep 2018 09:46:05 GMT"
x-li-fabric:"prod-ltx1"
transfer-encoding:"chunked"
connection:"keep-alive"
x-li-pop:"PROD-IDB2"
x-li-proto:"http/1.1"
set-cookie:"lidc="b=TB07:g=1965:u=1401:i=1536745565:t=1536824643:s=AQHBwKwS4Rsf4yI0kKGnz8pQwqOmeVu0""
x-li-route-key:""b=TB07:g=1965:u=1401:i=1536745565:t=1536824643:s=AQHBwKwS4Rsf4yI0kKGnz8pQwqOmeVu0""
x-li-uuid:"EWbxLvOdUxXAHJ7aEysAAA=="
serviceErrorCode:0
message:"Invalid query parameters passed to request"
When I am trying the same request with TargetingCriteriaV1 I do not have the issue and everything is working fine.
Try,by changing the countryGroup name(na)in urn with capital letters as (urn%3Ali%3AcountryGroup%3ANA).
GET /v2/audienceCountsV2?q=targetingCriteriaV2&targetingCriteria=(include:(and:List((or:(urn%3Ali%3AadTargetingFacet%3Alocations:List(urn%3Ali%3AcountryGroup%3ANA))),(or:(urn%3Ali%3AadTargetingFacet%3Askills:List(urn%3Ali%3Askill%3A17)))))) HTTP/1.1
The problem in this case was that the encoding was not done properly on my side. I was encoding all the ":" symbols while the API has a restriction to encode only a specific part of target criteria object.
For example:
targetingCriteria=(include:(and:List((or:(urn:li:adTargetingFacet:locations:List(urn:li:countryGroup:na))),(or:(urn:li:adTargetingFacet:skills:List(urn:li:skill:17))))))
was encoded to
targetingCriteria=(include:(and:List((or:(urn%3Ali%3AadTargetingFacet%3Alocations:List(urn%3Ali%3AcountryGroup%3Ana))),(or:(urn%3Ali%3AadTargetingFacet%3Askills:List(urn%3Ali%3Askill%3A17))))))

HTTPIE 307 Temp Redirect - APIGATEWAY

I'm trying to get an AWS APIGateway implementation going, and am trying to send a request from the HTTPie module rather than from Postman. It works perfectly from Postman, but HTTPie doesn't seem to work for me, and only throws a 307 Temporary Redirect.
Using the following command:
http POST {userid}.execute-api.ap-southeast-2.amazonaws.com/sqstest/message name=john
Outputs:
HTTP/1.1 307 Temporary Redirect
Connection: keep-alive
Content-Length: 185
Content-Type: text/html
Date: Mon, 16 Apr 2018 06:28:24 GMT
Location: https://{userid}.execute-api.ap-southeast-2.amazonaws.com/sqstest/message
Server: CloudFront
Via: ################(CloudFront)
X-Amz-Cf-Id: ######################
X-Cache: Redirect from cloudfront
I did notice that Content-Type was text/html, which was odd considering I needed to send a json - but no matter what variant of the command I tried, it would still return the same results.
From my understanding it should work the same as Postman as long as the headers are the same (they are minus the content-type, which doesn't change even if I define it using -j/--json).
Any help?
Cheers.
After a few hours of trial-and-error, determined that the error was in syntax.
Required a https:// on the command and to state it as json it needed a semicolon (:).
For example:
http POST https://{userid}.execute-api.ap-southeast-2.amazonaws.com/sqstest/message name:=john
As opposed to the statement in the question.

Axis2 sending multipart response when content-type is "text/xml"

Axis2 by default is send a multipart response even when there are no attachments
Why is axis2 sending a multipart response & how to ask it to send a "application/xml" or "application/soap+xml" how to get rid of multipart?
In the axis2.xml I have
In the response I see
HTTP/1.1 200 OK
Date: Fri, 17 Feb 2017 01:07:08 GMT
Transfer-Encoding: chunked
Content-Type: multipart/related; boundary="MIMEBoundary_87162747c87b279f7caa4e1ab573d5d864a878de7fae1a0b"; type="application/xop+xml"; start="<0.97162747c87b279f7caa4e1ab573d5d864a878de7fae1a0b#apache.org>"; start-info="text/xml"
--MIMEBoundary_87162747c87b279f7caa4e1ab573d5d864a878de7fae1a0b
Content-Type: application/xop+xml; charset=UTF-8; type="text/xml"
Content-Transfer-Encoding: binary
Content-ID: <0.97162747c87b279f7caa4e1ab573d5d864a878de7fae1a0b#apache.org>
200<?xml version="1.0" encoding="UTF-8"?>
<List_Wrapper>
<_bp>
<_comments><_comment><content>Again a new comment this is a text type bp comment need to see this in the text json 1</content><published_date>2017-01-18T21:07:15</published_date><published_by>cyril furtado</published_by><company>Chevron Inc.</company></_comment></_comments></_bp>
</List_Wrapper>
--MIMEBoundary_87162747c87b279f7caa4e1ab573d5d864a878de7fae1a0b-
I too faced similar issue for AXIS 2 quite recently , so thought to answer this.
AXIS 2 by default support attachment processing globally, which might not be needed for all types of services. To resolve this issue I disabled MTOM processing globally by modifying axis2.xml file -
<parameter name="enableMTOM">false</parameter>
This capability can now be enabled on need basis per service basis by enabling this property via respective services.xml file

How to login to RQM using REST API?

I'm trying to communicate with IBM Rational Quality Manager server using its REST API. I'm using RESTClient browser plugin, and while the browser is logged in, everything works as expected. For the record, my requests look like
https://server/qm/service/com.ibm.rqm.integration.service.IIntegrationService/resources/project/testscript/urn:com.ibm.rqm:testscript:42
However, if I wait long enough for RQM to logout, REST API says I need to login back to proceed (see below). I'm pretty sure this is possible to do via the API itself, because RQM ships with RQMUrlUtility which accepts username and password and runs basically the same REST requests I'm using:
java -jar RQMUrlUtility.jar -command GET -user JazzUserID -password JazzPassword -filepath pathtoFile -url REST_URL
So far, I have found this topic explaining how to login using HTTP basic authentication. Following this advice, I have added Authorization: Basic dXNlcm5hbWU6cGFzc3dvcmQ= (not my real password) to the request, but RQM still fails to login. I have also tried setting User-Agent to a bogus value, as well as sending the value from JSESSIONID in X-Jazz-CSRF-Prevent header as described here, but regardless of all these headers being present or not, I get the same response:
Status Code: 200 OK
Cache-Control: no-cache="set-cookie, set-cookie2"
Connection: Keep-Alive
Content-Encoding: gzip
Content-Language: en-US
Content-Type: text/html; charset=UTF-8
Date: Tue, 26 Jan 2016 15:48:02 GMT
Expires: Thu, 01 Dec 1994 16:00:00 GMT
Keep-Alive: timeout=10, max=100
Set-Cookie: JazzFormAuth=Form; Path=/qm; Secure
x-com-ibm-team-scenario=ac55f959-c738-4ef0-854d-6e37648edcba%3Bname%3DInitial+Page+Load%3Bextras%3D%2Fqm%2Fauth%2Fauthrequired%2C1453823282026; Path=/
Transfer-Encoding: chunked
X-Powered-By: Servlet/3.0
X-com-ibm-team-repository-web-auth-msg: authrequired
Can anyone with experience with RQM API tell me what's wrong? Or perhaps I'm missing something basic, common to most RESP APIs out there?
Could it be your header name?
Authorisation: Basic dXNlcm5hbWU6cGFzc3dvcmQ=
Should probably be:
Authorization: Basic dXNlcm5hbWU6cGFzc3dvcmQ=
Notice the "z".