We periodically runs jobs and we need to save the output into a PDS and then parse the output to extract parts of it to save into another member. It needs to be done by issuing a REXX command using the percent sign and the REXX member name as an SDSF command line. I've attempted to code a REXX to do this, but it is getting an error when trying to invoke an ISPF service, saying the ISPF environment has not been established. But, this is SDSF running under ISPF.
My code has this in it (copied from several sources and modified):
parse arg PSDSFPARMS "(" PUSERPARMS
parse var PSDSFPARMS PCURRPNL PPRIMPNL PROWTOKEN PPRIMCMD .
PRIMCMD=x2c(PPRIMCMD)
RC = isfquery()
if RC <> 0 then
do
Say "** SDSF environment does not exist, exec ending."
exit 20
end
RC = isfcalls("ON")
Address SDSF "ISFGET" PPRIMPNL "TOKEN('"PROWTOKEN"')" ,
" (" VERBOSE ")"
LRC = RC
if LRC > 0 then
call msgrtn "ISFGET"
if LRC <> 0 then
Exit 20
JOBNAME = value(JNAME.1)
JOBNBR = value(JOBID.1)
SMPDSN = "SMPE.*.OUTPUT.LISTINGS"
LISTC. = ''
SMPODSNS. = ''
SMPODSNS.0 = 0
$ = outtrap('LISTC.')
MSGVAL = msg('ON')
address TSO "LISTC LVL('"SMPDSN"') ALL"
MSGVAL = msg(MSGVAL)
$ = outtrap('OFF')
do LISTCi = 1 to LISTC.0
if word(LISTC.LISTCi,1) = 'NONVSAM' then
do
parse var LISTC.LISTCi . . DSN
SMPODSNS.0 = SMPODSNS.0 + 1
i = SMPODSNS.0
SMPODSNS.i = DSN
end
IX = pos('ENTRY',LISTC.LISTCi)
if IX <> 0 then
do
IX = pos('NOT FOUND',LISTC.LISTCi,IX + 8)
if IX <> 0 then
do
address ISPEXEC "SETMSG MSG(IPLL403E)"
EXITRC = 16
leave
end
end
end
LISTC. = ''
if EXITRC = 16 then
exit 0
address ISPEXEC "TBCREATE SMPDSNS NOWRITE" ,
"NAMES(TSEL TSMPDSN)"
I execute this code by typing %SMPSAVE next to the spool output line on the "H" SDSF panel and it runs fine until it gets to this point in the REXX:
114 *-* address ISPEXEC "TBCREATE SMPDSNS NOWRITE" ,
"NAMES(TSEL TSMPDSN)"
>>> "TBCREATE SMPDSNS NOWRITE NAMES(TSEL TSMPDSN)"
ISPS118S SERVICE NOT INVOKED. A VALID ISPF ENVIRONMENT DOES NOT EXIST.
+++ RC(20) +++
Does anyone know why it says I don't have a valid ISPF environment and how I can get around this?
I've done quite a bit in the past with REXX, including writing REXX code to handle line commands, but this is the first time I've tried to use ISPEXEC commands within this code.
Thank you,
Alan
There is a Calc file named as 'Data.ods' with a sheet named 'DataSheet' which should be saved in a 'Data.csv' file in the current directory using {tab} as field delimiter and double quoted data fields. How to implement this in LO Basic macro?
You have not specified whether the macro should open the 'Data.ods' spreadsheet or whether it is already open. This code works with the current spreadsheet:
Sub Generate_CSV()
Dim sURL As String ' URL of current spreadsheet
Dim FileN As String ' URL of target CSV-file
Dim oCurrentController As Object ' Before save - activate sheet sSheetName
Dim storeParms(2) as new com.sun.star.beans.PropertyValue
Const sSheetName = "DataSheet"
GlobalScope.BasicLibraries.LoadLibrary("Tools") ' Only for GetFileName
sURL = thisComponent.getURL()
If Not thisComponent.getSheets().hasByName(sSheetName) Then
MsgBox ("Sheet """ & sSheetName & """ Not Found In Current Spreadsheet")
Exit Sub
EndIf
FileN = GetFileNameWithoutExtension(sURL) & ".csv" ' For Data.ods it will be Data.csv
REM Options to StoreTo:
storeParms(0).Name = "FilterName"
storeParms(0).Value = "Text - txt - csv (StarCalc)"
storeParms(1).Name = "FilterOptions"
storeParms(1).Value = "9,34,,65535,1,,0,true,true,true"
REM About this string see https://wiki.openoffice.org/wiki/Documentation/DevGuide/Spreadsheets/Filter_Options
storeParms(2).Name = "Overwrite"
storeParms(2).Value = True
REM Activate sheet for export - select "DataSheet"
thisComponent.getCurrentController().setActiveSheet(thisComponent.getSheets().getByName(sSheetName))
REM storeToURL can raises com.sun.star.io.IOException! Only now:
On Error GoTo Errorhandle
REM Export
thisComponent.storeToURL(FileN,storeParms())
MsgBox ("No Error Found,Upload file is saved : """ + ConvertFromUrl(FileN) + """.")
Exit Sub
Errorhandle:
MsgBox ("Modifications Are Not Saved,Upload File Not Generated" & chr(13) _
& "May be table " & ConvertFromUrl(FileN) & " is open in another window?")
Exit Sub
Resume
End Sub
(It was posted on 18 Nov 2011 there)
Whether there is any way to close and open cd-drive using cmd?
I can open it like this:
powershell (New-Object -com "WMPlayer.OCX.7").cdromcollection.item(0).eject()
But idk how to close it
(Of course I can push it in, but i mean how i can close it with cmd)
Found on Google with keywords :
powershell close cd rom drive
http://www.powershellmagazine.com/2013/11/12/pstip-ejecting-and-closing-cdrom-drive-the-powershell-way/
do
Dim ts
Dim strDriveLetter
Dim intDriveLetter
Dim fs 'As Scripting.FileSystemObject
Const CDROM = 4
On Error Resume Next
Set fs = CreateObject("Scripting.FileSystemObject")
strDriveLetter = ""
For intDriveLetter = Asc("A") To Asc("Z")
Err.Clear
If fs.GetDrive(Chr(intDriveLetter)).DriveType = CDROM Then
If Err.Number = 0 Then
strDriveLetter = Chr(intDriveLetter)
Exit For
End If
End If
Next
Set oWMP = CreateObject("WMPlayer.OCX.7" )
Set colCDROMs = oWMP.cdromCollection
For d = 0 to colCDROMs.Count - 1
colCDROMs.Item(d).Eject
Next 'null
For d = 0 to colCDROMs.Count - 1
colCDROMs.Item(d).Eject
Next 'null
set owmp = nothing
set colCDROMs = nothing
loop
save as .vbs
you might have to disable antivirus
How to upload multiple images and save it locally or in server in progress 4gl and rename each images? tried to search google with keywords "upload images in progress 4gl / openedge" but no results.
Good day:
i found a few codes in the internet and after a few tweeks this is my code:
OS-CREATE-DIR VALUE(todr_name).
stat = OS-ERROR.
IF stat NE 0 THEN
MESSAGE "Directory not created. System Error #" stat.
ic = 0.
INPUT FROM OS-DIR (frdr_name).
REPEAT:
IMPORT cFileShort cFileLong cType.
/*MESSAGE /*cFileShort*/ /*cFileLong*/ cType VIEW-AS ALERT-BOX INFO.*/
/* File or Directory ? */
IF cType MATCHES "*F*" THEN DO:
ic = ic + 1.
/*MESSAGE "ShortFileName" cFileShort SKIP
"LongFileName" cFileLong VIEW-AS ALERT-BOX INFO.*/
MESSAGE STRING(ic) + ".jpg" VIEW-AS ALERT-BOX INFO.
OS-COPY VALUE (cFileLong) VALUE (SUBSTITUTE (todr_name, cFileShort )).
OS-RENAME VALUE(todr_name + "\" + cFileShort) VALUE(todr_name + "\" + STRING(ic) + ".jpg").
/*IF OS-ERROR = 0 THEN
OS-DELETE VALUE (cFileLong).*/
END.
END.
I want to be able to run a program through command line and I want to start it with VbScript. I also want to get the output of the command line and assign it to a variable and I want all this to be done silently without cmd windows popping up. I have managed two things separately but not together. Here's what I got so far.
Run the command from cmd and get output:
Dim WshShell, oExec
Set WshShell = WScript.CreateObject("WScript.Shell")
Set oExec = WshShell.Exec("C:\snmpget -c public -v 2c 10.1.1.2 .1.3.6.1.4.1.6798.3.1.1.1.5.1")
x = oExec.StdOut.ReadLine
Wscript.Echo x
The above script works and does what I want except that cmd pops up for a brief moment.
Here's a script that will run silently but won't grab the output
Set WshShell = WScript.CreateObject("WScript.Shell")
Return = WshShell.Run("C:\snmpset -c public -v 2c -t 0 10.1.1.2 .1.3.6.1.4.1.6798.3.1.1.1.7.1 i 1", 0, true)
Is there a way to get these two to work together?
Let me give you a background on why I want do to this. I am basically polling a unit every 5-10 minutes and I am going to get the script to email or throw a message box when a certain condition occurs but I don't want to see cmd line popping up all day long on my computer. Any suggestions?
Thanks
You can redirect output to a file and then read the file:
return = WshShell.Run("cmd /c C:\snmpset -c ... > c:\temp\output.txt", 0, true)
Set fso = CreateObject("Scripting.FileSystemObject")
Set file = fso.OpenTextFile("c:\temp\output.txt", 1)
text = file.ReadAll
file.Close
I have taken this and various other comments and created a bit more advanced function for running an application and getting the output.
Example to Call Function: Will output the DIR list of C:\ for Directories only. The output will be returned to the variable CommandResults as well as remain in C:\OUTPUT.TXT.
CommandResults = vFn_Sys_Run_CommandOutput("CMD.EXE /C DIR C:\ /AD",1,1,"C:\OUTPUT.TXT",0,1)
Function
Function vFn_Sys_Run_CommandOutput (Command, Wait, Show, OutToFile, DeleteOutput, NoQuotes)
'Run Command similar to the command prompt, for Wait use 1 or 0. Output returned and
'stored in a file.
'Command = The command line instruction you wish to run.
'Wait = 1/0; 1 will wait for the command to finish before continuing.
'Show = 1/0; 1 will show for the command window.
'OutToFile = The file you wish to have the output recorded to.
'DeleteOutput = 1/0; 1 deletes the output file. Output is still returned to variable.
'NoQuotes = 1/0; 1 will skip wrapping the command with quotes, some commands wont work
' if you wrap them in quotes.
'----------------------------------------------------------------------------------------
On Error Resume Next
'On Error Goto 0
Set f_objShell = CreateObject("Wscript.Shell")
Set f_objFso = CreateObject("Scripting.FileSystemObject")
Const ForReading = 1, ForWriting = 2, ForAppending = 8
'VARIABLES
If OutToFile = "" Then OutToFile = "TEMP.TXT"
tCommand = Command
If Left(Command,1)<>"""" And NoQuotes <> 1 Then tCommand = """" & Command & """"
tOutToFile = OutToFile
If Left(OutToFile,1)<>"""" Then tOutToFile = """" & OutToFile & """"
If Wait = 1 Then tWait = True
If Wait <> 1 Then tWait = False
If Show = 1 Then tShow = 1
If Show <> 1 Then tShow = 0
'RUN PROGRAM
f_objShell.Run tCommand & ">" & tOutToFile, tShow, tWait
'READ OUTPUT FOR RETURN
Set f_objFile = f_objFso.OpenTextFile(OutToFile, 1)
tMyOutput = f_objFile.ReadAll
f_objFile.Close
Set f_objFile = Nothing
'DELETE FILE AND FINISH FUNCTION
If DeleteOutput = 1 Then
Set f_objFile = f_objFso.GetFile(OutToFile)
f_objFile.Delete
Set f_objFile = Nothing
End If
vFn_Sys_Run_CommandOutput = tMyOutput
If Err.Number <> 0 Then vFn_Sys_Run_CommandOutput = "<0>"
Err.Clear
On Error Goto 0
Set f_objFile = Nothing
Set f_objShell = Nothing
End Function
I am pretty new to all of this, but I found that if the script is started via CScript.exe (console scripting host) there is no window popping up on exec(): so when running:
cscript myscript.vbs //nologo
any .Exec() calls in the myscript.vbs do not open an extra window, meaning
that you can use the first variant of your original solution (using exec).
(Note that the two forward slashes in the above code are intentional, see cscript /?)
Here I found a solution, which works for me:
set wso = CreateObject("Wscript.Shell")
set exe = wso.Exec("cmd /c dir /s /b d:\temp\*.jpg")
sout = exe.StdOut.ReadAll
Look for assigning the output to Clipboard (in your first script) and then in second script parse Clipboard value.
#Mark Cidade
Thanks Mark! This solved few days of research on wondering how should I call this from the PHP WshShell. So thanks to your code, I figured...
function __exec($tmppath, $cmd)
{
$WshShell = new COM("WScript.Shell");
$tmpf = rand(1000, 9999).".tmp"; // Temp file
$tmpfp = $tmppath.'/'.$tmpf; // Full path to tmp file
$oExec = $WshShell->Run("cmd /c $cmd -c ... > ".$tmpfp, 0, true);
// return $oExec == 0 ? true : false; // Return True False after exec
return $tmpf;
}
This is what worked for me in my case. Feel free to use and modify as per your needs. You can always add functionality within the function to automatically read the tmp file, assign it to a variable and/or return it and then delete the tmp file.
Thanks again #Mark!
Dim path As String = GetFolderPath(SpecialFolder.ApplicationData)
Dim filepath As String = path + "\" + "your.bat"
' Create the file if it does not exist.
If File.Exists(filepath) = False Then
File.Create(filepath)
Else
End If
Dim attributes As FileAttributes
attributes = File.GetAttributes(filepath)
If (attributes And FileAttributes.ReadOnly) = FileAttributes.ReadOnly Then
' Remove from Readonly the file.
attributes = RemoveAttribute(attributes, FileAttributes.ReadOnly)
File.SetAttributes(filepath, attributes)
Console.WriteLine("The {0} file is no longer RO.", filepath)
Else
End If
If (attributes And FileAttributes.Hidden) = FileAttributes.Hidden Then
' Show the file.
attributes = RemoveAttribute(attributes, FileAttributes.Hidden)
File.SetAttributes(filepath, attributes)
Console.WriteLine("The {0} file is no longer Hidden.", filepath)
Else
End If
Dim sr As New StreamReader(filepath)
Dim input As String = sr.ReadToEnd()
sr.Close()
Dim output As String = "#echo off"
Dim output1 As String = vbNewLine + "your 1st cmd code"
Dim output2 As String = vbNewLine + "your 2nd cmd code "
Dim output3 As String = vbNewLine + "exit"
Dim sw As New StreamWriter(filepath)
sw.Write(output)
sw.Write(output1)
sw.Write(output2)
sw.Write(output3)
sw.Close()
If (attributes And FileAttributes.Hidden) = FileAttributes.Hidden Then
Else
' Hide the file.
File.SetAttributes(filepath, File.GetAttributes(filepath) Or FileAttributes.Hidden)
Console.WriteLine("The {0} file is now hidden.", filepath)
End If
Dim procInfo As New ProcessStartInfo(path + "\" + "your.bat")
procInfo.WindowStyle = ProcessWindowStyle.Minimized
procInfo.WindowStyle = ProcessWindowStyle.Hidden
procInfo.CreateNoWindow = True
procInfo.FileName = path + "\" + "your.bat"
procInfo.Verb = "runas"
Process.Start(procInfo)
it saves your .bat file to "Appdata of current user" ,if it does not exist and remove the attributes
and after that set the "hidden" attributes to file after writing your cmd code
and run it silently and capture all output saves it to file
so if u wanna save all output of cmd to file just add your like this
code > C:\Users\Lenovo\Desktop\output.txt
just replace word "code" with your .bat file code or command and after that the directory of output file
I found one code recently after searching alot
if u wanna run .bat file in vb or c# or simply
just add this in the same manner in which i have written