I've looked into the forum for one hour now, and tried everything I've found here but still I don't manage to run my .exe using a powershell script.
Please forgive my ignorance, I'm very new with powershell..
Basically, my script is aimed to daily monitor files loaded.
For this, I need to list .txt files in my working directory, which I managed to do.
My issue is that when files arrive in my working folder, they have nonspeaking names that I can't figure out which business it's related to.
There is a RemaneFile1.exe executable that renames files according to some data codes inside my .txt files from something like "Inf320638.txt" to something like "lot_RUHPEG_296_320638" and that is exactly what .exe I would like to run using powershell (I didn't coded it, and I don't know how it works, just that when I manually run it it renames my files just fine).
I've tried those two command lines below, but when I look at my files, they are actually not renamed.
1. &".\INFOCENTRE\LOTS\RenameFile1.exe
=> When I check my file name it's still like "Inf320638.txt".
2. Start-Process ".\INFOCENTRE\LOTS\RenameFile1.exe" => A command prompt shows up for an instant, but when I check my file name it's like "Inf320638.txt".
Any help would be highly appreciated,
Brgs,
Thomas.
Try to run the executable with the following arguments:
Start-Process .\INFOCENTRE\LOTS\RenameFile1.exe -WorkingDirectory .\INFOCENTRE\LOTS -Wait
It might be, that the workingdirectory is what screws it up. The -wait switch lets powershell wait for the programm to finish, you could omit it.
Related
I've added an option to copy a proper UNC path to the context menu of all directories via PowerShell.
Edit:
I didn't mention that I'm actually using two different keys: One to copy the UNC of the current directory, and one to copy it from a different directory. I didn't think it would make a difference, but it does.
End Edit
Currently, the key value is as follows:
powershell.exe -WindowStyle Hidden -Command . <path I have to censor>\Save-To-Clipboard.ps1 \"%L%\"
Expected behaviour:
The PowerShell script is run quietly.
Actual behaviour:
A PowerShell Window pops up and closes itself.
The same thing happens with cmd.
I've tried using a VBS wrapper as well, but it needs the current path as an argument, which I can't figure out how to do. Simply putting it after the filename as you would in the command line results in the error:
This file does not have an app associated with it for performing this
action. Please install an app or, if one is already installed, create
an association in the Default Apps settings page.
Key value here:
<path I have to censor>\ClunkyWrapper.vbs \"%L%\"
Admittedly, this is my first time running a command from a registry key, and I can't seem to find any resources about this topic. (I might just not know what exactly to google for.) So I would be thankful for more general information on how to run commands from registry keys as well.
Okay, I found a way.
First of all, apparently whether you need to use %L% or %V% depends on the key. I can't tell you why, unfortunately.
That solves the error message of the VBA script, but it still wouldn't run like this.
So I then used wscript.exe, and it finally worked.
wscript.exe <secret path>\ClunkyWrapper.vbs "%V%"
I have a .bat file that starts up a powershell script.
Within this powershell script, i startup PowerBI with a given database.
The powershell script waits till powerBI has been done starting up, and will then be exporting data to some datadump files.
Doing this manually works fine, and also when its on the task scheduler to run when user is logged on.
The moment i change this to "Run whether user is logged on or not" it doesnt work anymore.
The reason behind this, is that it seems that powershell is unable to start PowerBI and therefore there is no open data to query in the rest of the script.
So the positive side is it runs the bat and powershell just fine, only the powershell itself seems incapable to start powerBI.
Are there any solutions to this? should i for example use a different method to call the appliation to start?
currently the powershell snippit to start the app looks like this:
$PBIDesktop = "C:\Program Files\Microsoft Power BI Desktop\bin\PBIDesktop.exe"
$template = "C:\LiveData\Data.pbix"
$waitoPBD = 60
$app = START-PROCESS $PBIDesktop $template -PassThru
log_message "Waiting $($waitoPBD) seconds for PBI to launch"
Start-Sleep -s $waitoPBD
I faced similar issue. So, sharing my experience..
First of all, please verify couple of things.
Specify user account which will be used to invoke the job. Also, ensure that, the account have sufficient permission.
Don't forget to un-check the checkbox (as shown in screenshot) under Conditions Tab
Just found this one - sorry it took so long :D
But, i had this totally nervwrecking issue to.
Solution for me is to realize that the task scheduler is very deep part of the OS.
Thats why i have to grant access to the file, for the computername$ (system name) on the file or folder containing the file to run.
Rightclick on the file or folder -> Security. Select edit and add [Name of your computer]$ and give the read and execute permissions.
That's the only way I can make it run.
But i hope you found the solution in the meantime :)
I've been researching and learning about windows batch files, PowerShell and cmd these past few days.
We're having issues with Open Files, so we manually go to the server and do it with a press of a button. But since there might be a possible way to automate it and do the script every 5 minutes.
Someone helped me already telling me that I should make a script of
openfiles /disconnect /a* /op "E:\SERVERNAME\"
& so I did and put it on the Windows Task Scheduler Action Tab - Start a Program and put the file path of the batch file that I made.
But It seems that it's not working and we're still having the same issue.
I hope I made it clear.
When I call the following code:
Start-Process Firefox
Then the PowerShell opens the browser. I can do that with several other programs and it works. My question is: How does the PowerShell know which program to open if I type Firefox? I mean, Im not using a concrete Path or something ...
I though it has something to do with the environment variables ... But I cannot find any variable there which is called Firefox ... How can he know?
I traced two halves of it, but I can't make them meet in the middle.
Process Monitor shows it checks the PATHs, and eventually checks HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\firefox.exe so that's my answer to how it finds the install location, and then runs it.
That registry key is for Application Registration which says:
When the ShellExecuteEx function is called with the name of an executable file in its lpFile parameter, there are several places where the function looks for the file. We recommend registering your application in the App Paths registry subkey.
The file is sought in the following locations:
The current working directory.
The Windows directory only (no subdirectories are searched).
The Windows\System32 directory.
Directories listed in the PATH environment variable.
Recommended: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths
That implies PowerShell calls the Windows ShellExecuteEx function, which finds FireFox as a registered application, or it tries the same kind of searching itself internally.
Going the other way to try and confirm that, the Start-Process cmdlet has a parameter set called UseShellExecute. The 'Notes' of that help says:
This cmdlet is implemented by using the Start method of the System.Diagnostics.Process class. For more information about this method, see Process.Start Method
Trying to trace through the source code on GitHub:
Here is the PowerShell source code for Start-Process.
Here, at this line it tries to look up the $FilePath parameter with CommandDiscovery.LookupCommandInfo.
Here it checks else if (ParameterSetName.Equals("UseShellExecute"))
Then Here is the .Start() function which either starts it with ShellExecute or Process.Start()
OK, not sure if ShellExecute and ShellExecuteEx behave the same, but it could be PS calling Windows, which is doing the search for "FireFox".
That CommandSearcher.LookupCommandInfo comes in here and follows to TryNormalSearch() which is implemented here and immediately starts a CommandSearcher which has a state machine for the things it will search
SearchState.SearchingAliases
Functions
CmdLets
SearchingBuiltinScripts
StartSearchingForExternalCommands
PowerShellPathResolution
QualifiedFileSystemPath
and there I get lost. I can't follow it any further right now.
Either it shortcuts straight to Windows doing the lookup
Or the PowerShell CommandSearcher does the same search somehow
Or the PowerShell CommandSearcher in some way runs out of searching, and the whole thing falls back to asking Windows search.
The fact that Process Monitor only logs one query in each PATH folder for "firefox.*" and then goes to the registry key suggests it's not doing this one, or I'd expect many more lookups.
The fact that it logs one query for "get-firefox.*" in each PATH folder suggests it is PowerShell's command searcher doing the lookup and not Windows.
Hmm.
Using Process Monitor I was able to trace the PowerShell.
It first searches the $env:path variable, then the $profile variable.
In my case firefox wasn't found and then it searches through a whole lot in the Registry and somehow finds it.
It might have something to do with how firefox is installed on the system.
All,
Note: I have updated the question after some feedback.
Thanks to #jisaak for his help so far.
I have the need to run a PowerShell script that adds TCP bindings and some other stuff when I deploy my Cloud Service.
Here is my Cloud Service Project:
Here is my Cloud Service Project and Webrole project:
Here is my task in ServiceDefinition.csdef:
And here is the PowerShell script I want to run:
here is my attempt at the Startup.cmd:
When I deploy I get this in the Azure log:
And this in the powershell log:
Any help would be very much appreciated.
I think I am nearly there but following other people syntax on the web doesn't seem to get me there.
thanks
Russ
I think the issue is that the working directory of the batch command interpreter when it runs Startup.cmd runs is not as expected.
The Startup.cmd is located in the \approot\bin\Startup directory but the working directory is \approot\bin.
Therefore the command .\RoleStartup.ps1 is not able to find the RoleStartup.ps1 as it is looking in the bin directory not in the bin\Startup directory.
Solutions I know to this are:
Solution 1:
Use ..\Startup\RoleStartup.ps1 to call the RoleStartup.ps1 from Startup.cmd.
Soltuion 2:
Change the current working directory in Startup.cmd so that the relative path .\RoleStartup.ps1 is found. I do this by CHDIR %~dp0 (see here) to change into the directory that contains Startup.cmd.
Solution 3:
As Don Lockhart's answer suggested, do not copy the Startup directory to the output, instead leave it set as "Content" in the Visual Studio project. This means the files within it will exist in the \approot\Startup directory on the Azure instance. (You would then want to make sure that the Startup folder is not publically accessible via IIS!). Then update the reference to Startup.cmd in ServiceDefinition.csdef to ..\Startup\Startup.cmd, and update the reference to RoleStartup.ps1 in Startup.cmd to ..\Startup\RoleStartup.ps1. This works on the fact that the working directory is bin and uses ..\Startup to always locate the Startup directory relative to it.
You don't need to set the executionpolicy within your cmd - just call the script. Also, you should use a relative path because you can't rely that there is C disk.
Change your batch to:
powershell -executionpolicy unrestricted -file .\RoleStartup.ps1
Right click on the RoleStartup.ps1 and Startup.cmdin Visual Studio and ensure that the Copy to Output directory is set to copy always.
If this still doesn't work, remove the startup call in your csdef, deploy the service, rdp into it and try to invoke the script by yourself to retrieve any errors.
Edit:
Try to adopt your script as below:
Import-Module WebAdministration
$site = $null
do # gets the first website until the result is not $null
{
$site = Get-WebSite | select -first 1
Sleep 1
}
until ($site)
# get the appcmd path
$appcmd = Join-Path ([System.Environment]::GetFolderPath('System')) 'inetsrv\appcmd.exe'
# ensure the appcmd.exe is present
if (-not (Test-Path $appcmd))
{
throw "appcmd.exe not found in '$appcmd'"
}
# The rest of your script ....
I've found it easier in the past to not copy the content to the output directory. I have approot\bin as the working directory. My startUp task element's commandLine attribute uses a relative reference to the .cmd file like so:
The .cmd file references the PowerShell script relatively from the working directory as well:
PowerShell -ExecutionPolicy Unrestricted -f ..\StartUp\RoleStartup.ps1
Ok,
So I am coming back to this after many different attempts to make it work.
I have tried using:
Startup config in the ServiceDefinition.csdef
I have tried registering a scheduled task on the server that scans the Windows Azure log looking for [System[Provider[#Name='Windows Azure Runtime 2.6.0.0'] and EventID=10004]]
Nothing worked either due to security or the timing of events and IIS not being fully setup yet.
So I finally bit the bullet and used my Webrole.cs => public override bool OnStart() method:
Combined with this in the ServiceDefinition.csdef:
Now it all works. This was not the most satisfying result as some of the other ways to do it felt more elegant. Also, many others posted that they got the other ways of doing it to work. Maybe I would have got there eventually but my time was restricted.
thanks
Russ