[23567,0,0,0,0,0] and other value is [452221,0,0,0,0,0] and the value should be contineously displaying about 100 values and then i want to display only the sensor value like in first sample 23567 and in second sample 452221 , only the these values have to display . For that I have written a code
value = str2double(str(2:7));see here my attempt
so I want to find the comma in the output and only display the value before first comma
As proposed in a comment by excaza, MATLAB has dedicated functions, such as sscanf for such purposes.
sscanf(str,'[%d')
which matches but ignores the first [, and returns the next (i.e. the first) number as a double variable, and not as a string.
Still, I like the idea of using regular expressions to match the numbers. Instead of matching all zeros and commas, and replacing them by '' as proposed by Sardar_Usama, I would suggest directly matching the numbers using regexp.
You can return all numbers in str (still as string!) with
nums = regexp(str,'\d*','match')
and convert the first number to a double variable with
str2double(nums{1})
To match only the first number in str, we can use the regexp
nums = regexp(str,'[(\d*),','tokens')
which finds a [, then takes an arbitrary number of decimals (0-9), and stops when it finds a ,. By enclosing the \d* in brackets, only the parts in brackets are returned, i.e. only the numbers without [ and ,.
Final Note: if you continue working with strings, you could/should consider the regexp solution. If you convert it to a double anyways, using sscanf is probably faster and easier.
You can use regexprep as follows:
str='[23567,0,0,0,0,0]' ;
required=regexprep(str(2:end-1),',0','')
%Taking str(2:end-1) to exclude brackets, and then removing all ,0
If there can be values other than 0 after , , you can use the following more general approach instead:
required=regexprep(str(2:end-1),',[-+]?\d*\.?\d*','')
Related
I am trying to write a Powershell code to identify a string with a specific character from a filename from multiple files.
An example of a filename
20190902091031_202401192_50760_54206_6401.pdf
$Variable = $Filename.Substring(15,9)
Results:
202401192 (this is what I am after)
However in some instances the filename will be like below
20190902091031_20240119_50760_54206_6401.pdf
$Variable = $Filename.Substring(15,9)
Results:
20240119_ (this is NOT what I am after)
I am trying to find a code to identify the 9th character,
IF the 9th character = "_"
THEN Set
$Variable = $Filename.Substring(15,8)
Results:
20240119
All credit to TheMadTechnician who beat me to the punch with this answer.
To expand on the technique a bit, use the split method or operator to split a string every time a certain character shows up. Your data is separated by the underscore character, so is a perfect example of using this technique. By using either of the following:
$FileName.Split('_')
$FileName -split '_'
You can turn your long string into an array of shorter strings, each containing one of the parts of your original string. Since you want the 2nd one, you use the array descriptor [1] (0 is 1st) and you're done.
Good luck
I have a line saved as $variable1, for example:
file"yourtxthere/i/master.ext" autostart:true, width
How would I go about writing the correct syntax using Regex in Powershell to grab everything within the quotes. Are regular expressions the best way to do this in Powershell?
Though regular expressions are powerful, this is a simple case. Thus a simple solution is based on string object's split() method.
$variable1 = 'file"yourtxthere/i/master.ext" autostart:true, width'
# Splitting requires at least one "
if ($variable1.IndexOf('"') -gt 0) {
$variable1.Split('"')[1]
}
Splitting the string will result an array of three elements:
file
yourtxthere/i/master.ext
autostart:true, width
As Powershell's arrays begin with index zero, the desired data is at index location 1. In case the string doesn't contain a double quote, the split won't work. This is checked with the statement
if ($variable1.IndexOf('"') -gt 0)
Without one, splitting a quoteless string would return just a one-celled array and trying to access index 1 would result in an error message:
$variable1.Split('!')[1]
Index was outside the bounds of the array.
I'm not 100% sure I understand the question but assuming you had that stored in $variable1 as a string like so:
$variable1 = 'file"yourtxthere/i/master.ext" autostart:true, width'
Then you could extract just the quoted text by splitting the string using the double quotes as a delimiter like this:
$variable1.Split('"')[1]
That splits the string into an array with three parts. The first part is everything before the first double quotes and the second everything in between the first and second quote marks, and the third everything after the second quotation marks. The [1] tells it to output the second part.
I think this picture might illustrate it a little better.
There are other ways to split that up and in fact the variable isn't necessary at all if you do something like this:
('file"yourtxthere/i/master.ext" autostart:true, width').split('"')[1]
That will work fine so long as there are never any extra double quotes before the first occurrence.
So I'm reading multiple text files in Matlab that have, in their first columns, a column of "times". These times are either in the format 'MM:SS.milliseconds' (sorry if that's not the proper way to express it) where for example the string '29:59.9' would be (29*60)+(59)+(.9) = 1799.9 seconds, or in the format of straight seconds.milliseconds, where '29.9' would mean 29.9 seconds. The format is the same for a single file, but varies across different files. Since I would like the times to be in the second format, I would like to check if the format of the strings match the first format. If it doesn't match, then convert it, otherwise, continue. The code below is my code to convert, so my question is how do I approach checking the format of the string? In otherwords, I need some condition for an if statement to check if the format is wrong.
%% Modify the textdata to convert time to seconds
timearray = textdata(2:end, 1);
if (timearray(1, 1) %{has format 'MM.SS.millisecond}%)
datev = datevec(timearray);
newtime = (datev(:, 5)*60) + (datev(:, 6));
elseif(timearray(1, 1) %{has format 'SS.millisecond}%)
newtime = timearray;
You can use regular expressions to help you out. Regular expressions are methods of specifying how to search for particular patterns in strings. As such, you want to find if a string follows the formats of either:
xx:xx.x
or:
xx.x
The regular expression syntax for each of these is defined as the following:
^[0-9]+:[0-9]+\.[0-9]+
^[0-9]+\.[0-9]+
Let's step through how each of these work.
For the first one, the ^[0-9]+ means that the string should start with any number (^[0-9]) and the + means that there should be at least one number. As such, 1, 2, ... 10, ... 20, ... etc. is valid syntax for this beginning. After the number should be separated by a :, followed by another sequence of numbers of at least one or more. After, there is a . that separates them, then this is followed by another sequence of numbers. Notice how I used \. to specify the . character. Using . by itself means that the character is a wildcard. This is obviously not what you want, so if you want to specify the actual . character, you need to prepend a \ to the ..
For the second one, it's almost the same as the first one. However, there is no : delimiter, and we only have the . to work with.
To invoke regular expressions, use the regexp command in MATLAB. It is done using:
ind = regexp(str, expression);
str represents the string you want to check, and expression is a regular expression that we talked about above. You need to make sure you encapsulate your expression using single quotes. The regular expression is taken in as a string. ind would this return the starting index of your string of where the match was found. As such, when we search for a particular format, ind should either be 1 indicating that we found this search at the beginning of the string, or it returns empty ([]) if it didn't find a match. Here's a reproducible example for you:
B = {'29:59.9', '29.9', '45:56.8', '24.5'};
for k = 1 : numel(B)
if (regexp(B{k}, '^[0-9]+:[0-9]+\.[0-9]+') == 1)
disp('I''m the first case!');
elseif (regexp(B{k}, '^[0-9]+\.[0-9]+') == 1)
disp('I''m the second case!');
end
end
As such, the code should print out I'm the first case! if it follows the format of the first case, and it should print I'm the second case! if it follows the format of the second case. As such, by running this code, we get:
I'm the first case!
I'm the second case!
I'm the first case!
I'm the second case!
Without knowing how your strings are formatted, I can't do the rest of it for you, but this should be a good start for you.
I re explain my pb in a large a.txt file i have
Amount of Food is 1
Desired Travel is 5
I need to read the 1 after the 'Amount of Food is ' expression and the 5 after the 'Desired Travel is' expression, Thanks again
You can have a look at this: with regexpi you can simply look for numbers in your strings.
The syntax is as simple as this:
startIndex = regexpi(str,expression)
where the expression parameter is a regex expression (i.e. '\d*' to retrieve consecutive digits).
In your specific case a way to perform this with regular expressions would be:
First you have to decide what strings are valid in your search
for example:
firstpar = 'First parameter is [0-9]+';
means that you are looking for a string 'First parameter is '
that ends with a sequence of digits.
Then you could use regexp or regexpi in the following way:
results = regexp(mystring, firstpar, 'match');
Where mystring is the text you perform the search on and 'match' means that you want parts of the text as output, not indexes.
Now, results is a cell matrix with each cell containing a string that appeared in your text and fulfilled your firstpar definition. In order to extract just the numbers from cell matrix of strings you could use regexp again, but now helping yourself with cellfun, which iteratively applies your command to all cells of a cell matrix:
numbers = cellfun(#(x) str2num(regexp(x, '[0-9]+', 'match', 'once')), results);
numbers is an array of numbers that you were looking for.
You can do the same for different string patterns - if you want to have a more general string definitions (instead of straightforward firstpar that we used here) read matlab documentation about regular expressions (alexcasalboni pasted it in his comment), scroll down to Input Arguments and expand 'expressions'.
The difference between regexp and regexpi is that the latter is case insensitive.
How to use matlab regexprep , for multiple expression and replacements?
file='http:xxx/sys/tags/Rel/total';
I want to replace 'sys' with sys1 and 'total' with 'total1'. For a single expression a replacement it works like this:
strrep(file,'sys', 'sys1')
and want to have like
strrep(file,'sys','sys1','total','total1') .
I know this doesn't work for strrep
Why not just issue the command twice?
file = 'http:xxx/sys/tags/Rel/total';
file = strrep(file,'sys','sys1')
strrep(file,'total','total1')
To solve it you need substitute functionality with regex, try to find in matlab's regexes something similar to this in php:
$string = 'http:xxx/sys/tags/Rel/total';
preg_replace('/http:(.*?)\//', 'http:${1}1/', $string);
${1} means 1st match group, that is what in parenthesis, (.*?).
http:(.*?)\/ - match pattern
http:${1}1/ - replace pattern with second 1 as you wish to add (first 1 is a group number)
http:xxx/sys/tags/Rel/total - input string
The secret is that whatever is matched by (.*?) (whether xxx or yyyy or 1234) will be inserted instead of ${1} in replace pattern, and then replace instead of old stuff into the input string. Welcome to see more examples on substitute functionality in php.
As documented in the help page for regexprep, you can specify pairs of patterns and replacements like this:
file='http:xxx/sys/tags/Rel/total';
regexprep(file, {'sys' 'total'}, {'sys1' 'total1'})
ans =
http:xxx/sys1/tags/Rel/total1
It is even possible to use tokens, should you be able to define a match pattern for everything you want to replace:
regexprep(file, '/([st][yo][^/$]*)', '/$11')
ans =
http:xxx/sys1/tags/Rel/total1
However, care must be taken with the first approach under certain circumstances, because MATLAB replaces the pairs one after another. That is to say if, say, the first pattern matches a string and replaces it with something that is subsequently matched by a later pattern, then that will also be replaced by the later replacement, even though it might not have matched the later pattern in the original string.
Example:
regexprep('This\is{not}LaTeX.', {'\\' '([{}])'}, {'\\textbackslash{}' '\\$1'})
ans =
This\textbackslash\{\}is\{not\}LaTeX.
=> This\{}is{not}LaTeX.
and
regexprep('This\is{not}LaTeX.', {'([{}])' '\\'}, {'\\$1' '\\textbackslash{}'})
ans =
This\textbackslash{}is\textbackslash{}{not\textbackslash{}}LaTeX.
=> This\is\not\LaTeX.
Both results are unintended, and there seems to be no way around this with consecutive replacements instead of simultaneous ones.