I have a static site, built locally by Jekyll, in a /docs folder inside the master branch of my repo, and have set my GH Pages settings to serve from that folder.
However, I keep getting Your site is having problems building: Page build failed. For more information, see https://help.github.com/articles/troubleshooting-github-pages-build-failures.
Some notes:
The repo itself is a Jekyll project, however, as I am using a private submodule GH Pages won't serve this as a Jekyll site, therefore this is why I have compiled the site locally to /docs and set this to be where GH Pages serves from.
The files in /docs are all compiled and just HTML, CSS and JS. No folders or files with _ preceding.
I have added .nojekyll in both the /docs folder and also in the root of the project, just in case.
The error message above is the only information GitHub is returning; no specific error code.
As far as I can tell, this is just a basic static website and GH should have no problem serving it. The only thing I can think is that it's getting confused by the fact that it's inside a jekyll project, but the only fix I can see for that is .nojekyll and that hasn't worked.
Does anyone have any ideas? I'm afraid I can't share the repo as it is a private company repo.
Posting this answer immediately so others may find it useful.
The private submodule breaks the build process, even though the pages site is set to serve from the /docs subfolder. Removing the submodule fixes the issue and serves the site as expected.
Related
I am a total programming noob and assume I'm missing something basic.
I forked this repo: https://github.com/colinmorris/tour-of-heroes
Here is the author's page for that repo: https://colinmorris.github.io/tour-of-heroes/
My fork: https://github.com/SmallFryHero/tour-of-heroes
My page based on that fork: https://smallfryhero.github.io/tour-of-heroes/
My page does not load.
I deployed the Github Pages using the gh-pages branch and from the /root folder.
I imported the code into a different web editor, CodeSandBox, and I can get it to run there along with my changes.
What do I need to fix to get it to run on my Github Pages? I added a readme to get the page to build. It seems to be deployed, but doesn't get past the "loading..." step.
Thanks for any help! Sorry for the total noob question.
The issue is that GitHub Pages, by default, use a static site generator called Jekyll under the hood. It basically converts a set of Markdown files into HTML (and provides templating, themes, plugins, and more).
In the case of your repo, which consists exclusively of static assets, Jekyll doesn't do much, but it does exclude the node_modules directory (see logs), which leads to the scripts in there being unavailable to the deployed page.
To fix this, you can indicate that you wish to skip any Jekyll processing and just upload the files as they are; to do so, add an empty file .nojekyll to the root directory in the gh-pages branch, as described in the documentation.
The repo from which you forked was last deployed multiple years ago, and I suspect the Jekyll default configuration back then didn't exclude node_modules yet.
I'm hosting a site on Github pages, and using Jekyll to generate it.
I added Angular and Lodash to my project using npm, but didn't want to upload 200 odd files to GitHub so I added node_modules to my .gitignore file and just made sure they were added as dependencies within package.json. The problem then becomes that GitHub pages/Jekyll doesn't auto-install the packages when it (Jekyll) generates.
So my question is, how can I use NPM on GitHub pages without actually uploading my node_modules folder into my GitHub repository?
You have two options:
build your site locally
Just generate your static files locally and then upload the final website to Github pages (Github can host non Jekyll websites)
use CI
Implement a script that after uploading your files to the master branch (in Travies for example), it builds your site and push the changes to the gp-pages branch.
According to the GitHub, you can add a _config.yml file to tell Jekyll to "include" the "node_modules" and "vendors" directories.
See:
https://help.github.com/en/articles/configuring-jekyll
The documentation of Jekyll tells me, that the _site-directory of a Jekyll site contains the compiled version of the site I have created after running
Jekyll build
Several articles recommend, that I include the _site-directory in my .gitignore-file because "it just contains the compiled version of my site". (that's what some articles recommend. So, I am not sure if I don't understand some concept of Jekyll or some concept of Git.
If the _site-directory contains the compiled version of a site, shouldn't that be the thing that is on the server the provides the final website? I do understand why you put source code on github and what to do with it, but in the case of github pages, Github is not a versioning system but a file hosting system and the file hosting system should host compiled versions of my work to provide it via MyUsername.github.io to users, right?
My question is: shouldn't it be only the _site-directory of my Jekyll website that I deploy to Github because that should be the compiled source code that github provides to users? So, shouldn't I put anything else in the .gitignore-file EXCEPT the _site-directory?
If I got this all wrong: what is the point in compiling my website via
Jekyll build
if I don't use the compiled source code for anything?
Two solutions :
You don't use Jekyll plugins (or only those supported by github pages)
You build your site only if you need to test it locally (jekyll build or jekyll serve). The generated code (in _site) will not be versioned as github pages will generate pages from the sources.
Put _site to .gitignore
Push you sources to github pages
You use Jekyll plugins
In this case, you need to build locally because Github pages cannot do the job with plugins.
Jekyll build locally
Put _site to .gitignore
commit your sources in one branch
commit your _site in another branch
See this post for more explanations.
I think the point where you are confused is that most of the tutorials talk about at least two different repositories.
the source code of your site, this is where you call Jekyll build
the compiled result, this is the one where you put the contents of the _site directory
Then it makes sense to ignore _site in case 1. out of the same reason you normally ignore compilation results: they are not meant to be tracked because they might change between every compilation without changing the source, so you would have to commit after every build although nothing (visible) has changed.
For repository 2. you of course have to update it with the contents of _site from repository 1 after your build.
Having said that you can of course combine 1. and 2. into a single repository by using master for the contents of _site and another branch e.g. source for the project with the Jekyll build files, here ignoring _site and then updating the master branch with the contents of it after changes.
the _site folder is cleared and all files inside are re-generated upon each "jekyll build". tracking a file that is to be removed seems to serve no useful purposes.
if you are thinking to git push your jekyll site to your github repo as a project page (gh-pages), the _site folder again serves no purposes as the jekyll installation at github will generate the _site for you automatically upon your files upload (git push).
the _site folder is useful only for local preview of your jekyll site (typically to be found at localhost:4000 by default).
I believe you might be looking at things the wrong way, It makes sense to ignore _site since every time you jekyll build your _site gets blasted, everything in there gets erased and written again.
So in my own opinion what you would like to push to github is the working directory since it's there where you work and all your changes are being versioned... with the plus of github doing the compiling and automatically building the site.
That being said, I usually keep _site out of my gitignore since I deploy to another hosting service and my deployment framework grabs the github repository and deploys from a particular branch I need the _site to be there.
Right now i have the following setup:
My jeyll build is in ~/jekyll-sites
My .git folder is in ~/jekyll-sites/_site
I'm now able to sync the jekyll generated ~/jekyll-sites/_site with my repo at: https://github.com/nielsrasmus/nielsrasmus.github.io
and it works perfect.
But i would also like to to save the whole jekyll build on github.
The question is:
Is it possible to make another repo called: nielsrasmus.github.io-source and sync the whole jekyll build here?
If so, what would be the best way to do it?
I've looked at so many answers that does not quite match what I want. So I'm pretty confused right now :-/
As long as you're not using any Jekyll plugins, you can actually push your Jekyll source to Github, and their servers will automatically generate the _site folder and serve it for you. You won't see this _site directory show up in your repository, but the generated files will be accessible from http://nielsrasmus.github.io
A great reference for how to do this is Tom Preston-Warner's personal blog, which is (naturally) hosted on Github Pages. Note that he placed the _site directory in his .gitgnore file, and Jekyll says "it's probably a good idea" for you to do the same, but you might be able to skip this part.
Both you and Tom are using the User Pages option, so your site gets generated as long as your content is in the Master branch (if you were using Project pages, it would use the gh-pages branch instead).
I think I solved the issue.
I installed the mac version of github and fiddled around, read a lot of man pages and finally I could make it happen :-)
What helped me was to click on the + sign in the bottom of the screen, as shown on the screenshot. Here I could point my repos at a local dir.
nielsrasmus/jekyll-sites: points to the root of the jekyll build.
nielsrasmus/nielsrasmus.github.io: points to the generated site at ~/jekyll-sites/_site
I recently wanted to publish my Jekyll site on Github pages, but it seems that putting everything in a subdirectory is giving some issues, even after I change the source to the correct directory.
My structure looks like this:
- site
- src (contains all Jekyll stuff)
- README.md
- GruntFile.js
- ...
Locally my site builds perfectly and when I go to http://localhost:4040 I can see it just nicely, but when I commit this to my Github and visit username.github.io I get a 404, if I go to username.github.io/src I can see part of my site, however all {% include %} are ignored.
In my _config.yml I updated the source: source: ./src, but that doesn't seem to help.
Is there a way to make Github Pages handle subdirectories properly? Basically I want to tell it that my Jekyll site is inside /src, and I want the url to just be username.github.io instead of username.github.io/src
I know i can use the pages branch and commit to there, but I would prefer if it could happen automaticly.
If it helps anyone, I attempted to run Jekyll on GH Pages from a subdir (and modified source) and was banging my head against the wall over these errors:
A file was included in subdir/index.html that is a symlink or does not exist in your _includes directory. For more information, see https://help.github.com/articles/page-build-failed-file-is-a-symlink.
After much searching on this, the definitive answer was right there in the docs:
Configuration Overrides
We override the following _config.yml values, which you are unable to
configure:
safe: true
lsi: false
source: your top-level directory
Keep in mind that if you change the source setting, your pages may not
build correctly. GitHub Pages only considers source files in the
top-level directory of a repository.
I contact Github support and they gave me 2 solutions.
Move all my Jekyll source files to my top-lever directory.
Use a different branch and update it manually each time.