I am trying to import a new project from SVN repo.
I am using eclipse neon 4.6. I have added SVN plugin via eclipse market place version (image attached).
I get this error while trying to checkout .
I could see that a native connector is listed in preference but with error, I am not able to change that.
Any help will be very much helpful.
It appears that JavaHL cannot initialize in your Subversive plug-in. Maybe you installed 64-bit JavaHL connector on 32-bit machine or vice-verse? Anyway, you can follow steps of section Enable JavaHL in Subversive plug-in for Eclipse from the article KB145. The article shows how to activate JavaHL in Subversive and Subclipse plugins and the instructions were thoroughly tested.
You can also consider switching from Subversive to Subclipse. I did not see similar problem with Subclipse - it worked right away after installation without issues.
Today my Eclipse 4.4 tells me I can update to ADT 23.0.3.1327240. Yay! (I don't see anything related to SVNKit.) So I hit "Finish". I get:
'Updating Software' has encountered a problem.
Cannot complete the install because one or more required items could not be found.
Cannot complete the install because one or more required items could not be found.
Software currently installed: SVNKit Client Adapter (Not required) 1.8.9 (org.tigris.subversion.clientadapter.svnkit.feature.feature.group 1.8.9)
Missing requirement: SVNKit pure Java Subversion Library 1.8.6.r10298_v20140730_2254 (org.tmatesoft.svnkit 1.8.6.r10298_v20140730_2254) requires 'bundle com.trilead.ssh2 [1.0.0,2.0.0)' but it could not be found
Cannot satisfy dependency:
From: SVNKit Client Adapter (Not required) 1.8.9 (org.tigris.subversion.clientadapter.svnkit.feature.feature.group 1.8.9)
To: org.tmatesoft.svnkit [1.8.0,1.9.0)
(sigh) Sometimes I hate Eclipse. And ADT. Especially ADT.
What can I do?
This software is Not required. So exclude it from installation(remove selection in left box). I have done so and succeeded with Subclipse.
I made this go away:
I went into my Eclipse installation details and uninstalled SVNKit.
I updated Eclipse (4.4.1RC1) and all available plugins (e.g. ADT 23.0.3). This time it was successful.
I installed new software directly from the Subclipse site. It showed that both SVNKit and SVNKit Client Adapter were available, so I installed them. This worked fine, except that Eclipse crashed when restarting. Manually restarting after that worked.
I updated software and a new version of SVNKit 1.8.6 suddenly was available. I installed it.
Now my Eclipse installation seems to be working and up-to-date. I suppose it was something corrupted with the SVNKit installation, which comes with Subclipse.
My Subclipse installation is set to use JavaHL instead of SVNKit. I'm going to leave it alone for the meantime.
I installed fedora 12 in my machine and got Eclipse installed as a pert of the fedora installation. But i am not getting the dynamic Web Project option since I don't have WTP installed in my eclipse. I am not able to find the exact link/package for my Galileo version. This is what i checked:
http://www.eclipse.org/galileo/projects.php
For the above link, I selected the WTP Common Tools download link, it redirected me to this link:
http://download.eclipse.org/webtools/downloads/
From the above link, i selected the build release 3.4.0, then i got this:
http://download.eclipse.org/webtools/downloads/drops/R3.4.0/R-3.4.0-20120612174739/
From here i am fairly confused what to download for getting the WTP enabled for my eclipse.
Note: I don't want any additional package to be installed unnecessarily. All i want is only WTP
Please provide me the exact link for the same so that i can proceed with it.
Regards,
I am constantly getting this error when working with eclispe and the subclipse plugin:
Unable to load default SVN Client
I have already installed both the SVNKit and the JavaHL provider, but it can't be found in the preferences:
I am using eclipse for win64bit
I had this problem after installing the latest eclipse and installing subclipse from the marketplace. To resolve you can follow these steps:
Click Help >> Install New Software...
Set Work with: Subclipse 1.10.x Update Site - http://subclipse.tigris.org/update_1.10.x
Ensure Hide items that are already installed is checked.
Click Select All.
Click Next.
Complete the remainder of the installation as usual.
For ubuntu 12.04 amd64
sudo apt-get install libsvn-java
add this to eclipse.ini after -vmargs:
-vmargs
-Djava.library.path=/usr/lib/jni:/usr/lib/x86_64-linux-gnu/jni
...
What JavaHL provider have you installed? It sounds like you need 64 bit JavaHL support. Have you tried SlikSVN?
I solved this with easiest way:
sudo apt-get install libsvn-java
sudo cp /usr/lib/jni/* /usr/lib
Faced the same problem after installed subclipse 1.8 from eclipse marketplace and resolved thru following steps:
1. Install subversion client (required)
2. Install Subversion JavaHL Native Library Adapter (required)
And it works now.
P/S: Eclipse Indigo
I don't know about JavaHL but to make the SVNKit appear on the list of SVN interfaces, you need to install the "SVN Client Adapter" and the "SVNKit Adapter" as well.
You can find those on the update site of Subclipse (*http://subclipse.tigris.org/update_1.8.x*).
I have a similar problem with Subclipse 1.8. Due to licenses limitations, SVN client aren't bundled with SVN any more. So I find the message "Unable to load default SVN Client".
My solutions is to install SVN client. It can't be easier. Go to Eclispe Marketplace, type Subclipse and click to install Subclipse again, select all options. When restarting Eclipse, it will prompt us to install an SVN client, choose SVNKit or JavaHL (I choose JavaHL). After restarting one more time, it all works.
In fedora 16 on x64 i meet also, i solved by downloading subversion 1.7 from here and installing:
yum install subversion-javahl-1.7.1-1.fc16.x86_64.rpm subversion-libs-1.7.1-1.fc16.x86_64.rpm subversion-1.7.1-1.fc16.x86_64.rpm
Install SVN on Eclipse Juno using the update site at http://subclipse.tigris.org/update_1.8.x
Go to Help -> Install new software, then Add update site.
Zend Studio 9 if you upgrade/update to 9.0.3 you will get this error as well. You need to uninstall all subEclipse and JavaHL stuff then follow the install procedures again and restart Zend studio.
Build 20120625 in Zend Version 9.0.3
If you are using the Subversive plugin (which is newer than the Subclipse one, and the two are easily confused with one another), you might run into problems finding the library even after configuring the library path in eclipse.ini. To fix the entire problem, you might need to add this setting to the file as well:
-Dsubversion.native.library=C:/SlikSVN_JavaHL/libsvnjavahl-1.dll
Read http://www.eclipse.org/subversive/installation-instructions.php for more help, it's a good-quality explanation of everything.
I had same problem with Spring STS 3.5.1 and Sub eclipse version 1.6. Upgraded to version 1.10 of subeclipse and everything is working fine.
The above problem arises with custom eclipse installation and due to updated version of subclipse.
You have to install the older version of subclipse manually.
For this i have done as following:
Under Help menu click "Install New Software..."
Select "http://subclipse.tigris.org/update_1.6.x" from the drop down menu
If URL of any other advanced version of are available change it to look as above.
Check the options selected are sensible e.g. "Hide items that are already installed"
Click "Select All"
Click Next/Finish through to completion.
After finishing the installation,under windows menu go to preferences,click on Team and on SVN.
Now change the client from Java HL to SVN pure kit.
That's it.
This resolved problem for me
Eclipse Java EE IDE for Web Developers.
Version: Oxygen.3a Release (4.7.3a)
Build id: 20180405-1200
I solved this problem as follows
1) Install Subversive - SVN Team Provider 4.0.5 from marketplace
2) Team -> SVN -> SVN Connectors and set SVNKit 1.8.14
3) Restart eclipse
All works well
I am new to Eclipse so I am having a hard time troubleshooting this problem. I have a new installation of Eclipse Java EE - Galileo on Windows, and I am unable to see any changes made in the IDE after installing plugins. I have verified that the plugins are installed via installation details, but see no changes made.
For example, after installing the maven integration plugin m2eclipse I go to File->New->Project ... and I have no option for maven. After installing the QuickRex plugin I have no view for it etc.
I have tried re-installing the plugins, re-installing Eclipse, and starting Eclipse with the -clean option, but nothing has resolved the issue.
Any ideas? Thanks!
Ok. This is just a wild guess but could you start over with a fresh install and make sure that you uncheck the option Contact all update sites during install to find required software as shown below:
alt text http://img717.imageshack.us/img717/8039/screenshot003ao.png
I faced a similar problem (on another platform than yours), some updates were "disabling" all my plugins. Not checking this option allowed me to work around this issue.
Follow-up: You'll need to install that Zest stuff manually from the GEF update site:
alt text http://img339.imageshack.us/img339/8003/screenshot003rl.png