I've just managed to setup SwiftyBeaver logging framework for my Xcode project, it works fine but Xcode raises an error every time I call my logging framework (that does not prevent me to compile nor to log properly though).
What I've done is just declaring my logging variable outside of a class' scope with some configurations like below:
let log = SwiftyBeaver.self
#if DEBUG
let logMinLevel = SwiftyBeaver.Level.debug
let logFormat = "$DHH:mm:ss.SSS$d $C$L$c $N.$F:$l - $M"
#else
let logMinLevel = SwiftyBeaver.Level.warning
let logFormat = "$DHH:mm:ss.SSS$d $C$L$c - $M"
#endif
Is there any way to get rid of that error message?
It seems that the issue disappeared.
After reporting it I changed my IDE for AppCode, then I came back to Xcode recently and the problem is no longer here.
Related
I just updated my Xcode to Version 14.1 (14B47b) from version 13.4. When I try to run my SwiftUI project in the live preview, the "Abort Trap" errors showed everywhere in the project.
Part of the error log is as below:
CompileSwift normal x86_64 /Users/apple/Downloads/SwapSpot/SwapU/ViewModels/ItemVMs/ItemGridViewModel.swift (in target 'SwapU' from project 'SwapU')
unknown:0: error: fatal error encountered during compilation; please submit a bug report (https://swift.org/contributing/#reporting-bugs) and include the project
unknown:0: note: SmallVector unable to grow. Requested capacity (4294967297) is larger than maximum value for size type (4294967295)
Please submit a bug report (https://swift.org/contributing/#reporting-bugs) and include the project and the crash backtrace.
I found a post that answers as such:
We will not observe "Abort: trap 6", if under Build Settings, we are using "Optimize for Speed" in Debug, instead of "No Optimization"
We can also avoid "Abort: trap 6", if we change the following code
guard let batchUpdateResult = batchUpdateResult else { return }
to
guard let batchUpdateResult2 = batchUpdateResult else { return }
I tried both methods mentioned above. Renaming the guard let variable did not work at all. Changing the optimization level in the target removed all the Abort Trap errors, and the project runs successfully in the simulator.
However, the live preview stopped working due to the optimization level. The new error is stated below:
OptimizationLevelError: not building -Onone
"SwapU.app" needs -Onone Swift optimization level to use previews
I believe this is a swift compiler error. Can anyone help me avoid this while keeping the live preview working?
We have faced the issue of "abort trap 6" in Xcode 12. Due to this reason app not running using Xcode 12. We are using the swift 5 versions and jsqmessageviewcontroller objective c library.
Below errors getting in Xcode 12.
<unknown>:0: error: fatal error encountered while reading from module 'wwww'; please file a bug report with your project and the crash log
<unknown>:0: note: module 'wwww' full misc version is '5.3.2(5.3.2)/Apple Swift version 5.3.2 (swiftlang-1200.0.45 clang-1200.0.32.28)'
top-level value not found
Cross-reference to module 'JSQMessagesViewController'
... JSQMessageMediaData
error: Abort trap: 6 (in target 'zapwww' from project 'zapwww')
If anyone has a solution please help us.
I had the same error in Xcode 12.5.1 and it seems to be a bug that has been fixed in the next beta. However there seem to be several issues that could cause this error. So my solution might not work.
For me the problem was very specific and only happened in the following scenario:
A method that returns an optional RealmObject (might be different in your case) is called.
The returned RealmObject has been assigned a variable.
Trying to unwrap the variable with guard let or if let using the same name for the new safely unwrapped variable.
The easiest fix is using different variable names or
Safely unwrapping the returned object directly without assigning it a variable.
Example that causes the error in my case:
class MyClass {
func returnObject() -> Object? {
return nil
}
func anyMethod() {
let myObject = returnObject()
guard let myObject = myObject else { return } // <-- works anywhere else but here.
}
}
Same example that fixed the error in my case:
class MyClass {
func returnObject() -> Object? {
return nil
}
func anyMethod() {
let myObject = returnObject()
guard let myNewObject = myObject else { return } // <-- Changed name of new variable here
}
}
I've seen people had this issue with other types, so it's not limited to the RealmObject type. But going through all guard let or if let with the same variable name is a good start.
I've also seen other people use fix it by cleaning the build folder or removing packages and reinstalling them. That didn't help for me though.
Problem: Abort Trap (In my case my code is working perfectly but when I trying to make an Archive file I got the "Abort Trap")
Solution:- Just Select Your Project from project Navegater (most Left Pane) Select Project > Select Targets > Build Settings > Swift Compiler - Code Genration > Optimization Level > Debug and Realease make "No Optimization [-Onone]"enter image description here
Flutter Specific
I had to set Optimization Level to No Optimization [-Onone] for Pods target.
Just Select Your Project from project Navigater (most Left Pane) Select
Pods > Build Settings > Swift Compiler - Code Generation > Optimization Level > Debug and Realease make No Optimization [-Onone]
for me i have just remove the library which cause the problem from pods file , then installed again will fix the problem
just had to run: 'pod update' to update my Realm pods and fixed it for me.
When I debug on Xcode it takes around 30 seconds or more to print results of po on Xcode console.
Unfortunately, this is only few information I have on the issue.
However, there is another point to consider. This issue is very specific to a project. This is because when I use po for other projects on same Macbook, it works immediately. Also, this particular project is slow on all other Macbook, and for all team.
I googled it but no relevant answer found. I find it easy to use print(...) rather than using debugging on Xcode console. However, it's more work and requires lots of rebuilds.
I have several explanations:
There is a lot of code (Xcode slows down after a certain amount of code) Also make sure your print statement is towards the top of your page. Xocde goes from top to bottom.
Your Mac is slow. Some Macs after a certain amount of usage slow down. Also if you have a Mac mini or air they are slower than others.
Xcode Beta. If you are using Xcode beta then there might just be a bug.
If none of those answer you provide me with more info and I provide other solutions.
Swift:
Try this solution which helps to reduce log time in debug mode.
Step 1: Create a new file called Utils.swift (File name based on your preference)
Step 2: Add following code in file
import Foundation
import UIKit
struct Utils { }
public func PrintLogs(_ message: Any, file: String = #file, function: String = #function, line: Int = #line) {
#if DEBUG
let className = file.components(separatedBy: "/").last ?? ""
let classNameArr = className.components(separatedBy: ".")
NSLog("\n\n--> Class Name: \(classNameArr[0]) \n--> Function Name: \(function) \n--> Line: \(line)")
print("--> Log Message: \(message)")
#endif
}
Usage: Call PrintLogs("Hello") instead of print("Hello")
Sample Output:
--> Class Name: HomeViewController
--> Function Name: logTest()
--> Line: 81
--> Log Message: Hello
I have a strange problem with the new Xcode 8 (no beta version) and swift3.
Once every other 3-4 times that I compile my code I get a 'command failed due to signal segmentation fault 11' error. I just need to enter new empty line, or sometimes changing some spaces, or add a comment (everywhere in the code) and the error disappears and I can compile again.
This is really strange because I'm not changing anything in the code! And sometimes I can compile and it works, then I don't change anything, I compile again and I get the error.
This is really annoying!
I have noticed this is happening since I have installed several 'Firebase' pods (Firebase, Firebase/Auth etc...). But I need them.
Anyone has any suggestion?
PS: I have set the Enable Bitcode of my project to No as many solution suggested, but nothing. In the error message it is not indicated any swift page where the error can be, an example is:
While loading members for 'Class_name' at
While deserializing 'func_name' (FuncDecl #42)
'func_name' is this one:
public class func loginUser(fir_user: FIRUser) {
let user = SFUser()
user.email = fir_user.email
user.isLogged = true
try! sfRealm.write() {
sfRealm.add(user, update:true)
}
var userToAdd = [String:AnyObject]()
userToAdd["email"] = fir_user.email! as NSString
let ref=FIRDatabase.database().reference()
let usersRef = ref.child(childName)
usersRef.setValue([key:value])
}
But then, as I said, I can just enter an empty row in another file and it compiles!
Thanks
I have the same issue i just figure out that i was using xcode 8.1 and the project's working copy was in xcode 8.2.1 so i just re install xcode 8.2.1 and problem got solved. Hope other can get the help trough this.
Ok, it seems that I have found the solution: it is a problem with Firebase and cocoapods, so 2 solutions:
Download Firebase and import into your project
I, instead, updated cocoapods to the last version and it worked. Upgraded Firebase - Now Getting Swift Compile Error
In my case there was some type checking issue deep down the compiler so the editor didn't give error in the gutter but on building the project I was getting signal setmentation fault 11 error:
1. While type-checking 'GetStoreAPIRequestModel' at /Users/.../StoreAPIModel.swift:9:1
2. While type-checking expression at [/Users/.../StoreAPIModel.swift:15:18 - line:15:31] RangeText="[Dictionary]()"
3. While resolving type [Dictionary] at [/Users/.../StoreAPIModel.swift:15:18 - line:15:29] RangeText="[Dictionary]"
So I changed my code from:
var stores = [Dictionary]() {
willSet {
allStores.removeAll()
for model in newValue {
allStores.append(StoreAPIModel(dictionary: model as! Dictionary).getModel())
}
}
}
To (more descriptive dictionary):
var stores = [[String : Any]]() {
willSet {
allStores.removeAll()
for model in newValue {
allStores.append(StoreAPIModel(dictionary: model as [String : AnyObject]).getModel())
}
}
}
This is tricky problem. Issue can be with line of code or syntax. I was getting similar error and it was due to incorrect usage of dictionary. I was trying to increment the value of dictionary element.
Solution is to triage the code, detailed error provide which module has issue, so try commenting part of code until you find the line which is causing the issue.
Hi i had the same issue with FireBase , my problem was that i was extending FIRStorageReference and FIRDatabaseReference and some time it compile successfully some time i get
command failed due to signal segmentation fault 11
so i removed that files and implement the method other way , now everything works fine.
Found my problem when this occurred. (No cocoapods.) I thought I had left the program in a working state, but I was wrong. I am writing a straightforward command-line program. What it does is somewhat general, so I defined all the strings that make it specific in let statements at the top of the program so that I could someday use the program in a different context.
Since that was working so well, I thought I'd be clever and do the same with a filter of an array of dictionaries. I turned:
list.filter { $0["SearchStrings"] == nil }
into:
let test = { $0["SearchStrings"] == nil }
// ...
list.filter(test)
meaning to continue working on the let, but I never went back and did that. Building gave me the segmentation fault error. Defining test as a function fixed the problem.
(Incidentally, I understand how to strip a filtering function down to the terse braces notation in the context of the call to Array.filter, and why that works, but I don't understand why I can't assign the brace expression to a constant and use it as such.)
I am having trouble debugging Swift Strings
func stringTest() {
let test1:String = "test1";
let test2:NSString = "test2";
// <-- Breakpoint here
println(test1);
println(test2);
}
If I set a breakpoint after these lines and try and print test1 I get the following error:
po test1
error: <REPL>:1:1: error: use of unresolved identifier 'test1'
test1
^
But I am able to print test2 successfully:
po test2
test2
It is a bug of Beta. Xcode6-Beta5 has still this bug.
You can only get debug info for swift's variables, but can't get it for swift's constants.
Temporarily you can change let test1 to var test1 and you will got debug info.
Hope this will be fixed in release version. Good Luck in debugging ;)
EDIT:
Unfortunately, the same issue is still happening in first release of Xcode Version 6.0.1 (6A317)
let test1:String -> debug info is unavailable
var test1:String -> debug info is available
EDIT2:
Yes, confirmed. It is fixed also for iOS apps in the latest Xcode 6.1 under OS X Yosemite.
This is most likely a bug in the debug information output. You can check this by grabbing the PC, for instance from register read pc, and then doing:
(lldb) image lookup -va <PC VALUE>
That will print a bunch of stuff, but the last entries will be all the variables currently visible to the debugger, and where they live (in registers or memory.) If you don't see the variable there, then the debug information must have told lldb that the variable is not currently live.
If you can reproduce this in some example code you can make available, please file a bug with bug reporter.apple.com.