So i have folder with several files:
$files = #(Get-ChildItem "myPath")
I can see via the debugger that $files contains several items and i want to take the first:
$files[0] = "123_this.is.string"
And i want to split in by '_' and take 123
$splitted = $files[0] -split "_"
So here i can see that $splitted is empty.
Any suggestions why this strange behavior ?
$files[0] isn't a string but a FileSystemInfo Object.
$files[0].getType()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True FileInfo System.IO.FileSystemInfo
So to get it work you have to use the split function to the filename of the file which is a string.
$files[0].name.getType()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True String System.Object
With this it should work:
$files[0].name.split("_")
Try:
$files[0].ToString().split("_")
Related
How to write function which get array as object from pipeline (actually any object) without to iterate over its items and another one argument (positional). Goal is to modify container (array), but not their items. Something like:
function xxx {
Param( magic-specification??? )
if ($obj type is array) {
iterate over $obj items {
$res = executes $args[0] script-block over them ($_)
if ($res) modify $obj
}
else if ($obj type is object) {
iterate over $obj properties {
$res = executes $args[0] script-block over them ($_)
if ($res) modify $obj property
}
}
here's a demo of how to bypass the way that PoSh is intended to unroll items sent across the pipeline ...
,#(1,2,3) | ForEach-Object {$_.GetType(); "$_" } | Out-Host
#(1,2,3) | ForEach-Object {$_.GetType(); "$_" } | Out-Host
1,2,3 | ForEach-Object {$_.GetType(); "$_" } | Out-Host
output ...
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
1 2 3
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Int32 System.ValueType
1
True True Int32 System.ValueType
2
True True Int32 System.ValueType
3
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Int32 System.ValueType
1
True True Int32 System.ValueType
2
True True Int32 System.ValueType
3
note that the 1st one has passed thru an array while the others all unrolled the array. that leading , is the array operator and it causes PoSh to send the array wrapped in another array. the outer one gets unrolled, the inner one gets passed on as an array.
Consider this code:
$a = '[{"a":"b"},{"c":"d"}]'
"Test1"
$a | ConvertFrom-Json | ForEach-Object { $_.GetType() }
"Test2"
$b = $a | ConvertFrom-Json
$b | ForEach-Object { $_.GetType() }
This produces the following output:
Test1
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
Test2
True False PSCustomObject System.Object
True False PSCustomObject System.Object
Evidently, if we use a temporary variable, whatever is passed down the pipeline is not the same thing that is passed if we do not use one.
I would like to know what the rules that powershell uses for automatic array wrapping / unwrapping are, and if the using a temp var the best course of action if we need to iterate through a json array.
Update 1
Logically ConvertFrom-Json should return an array with the input given and ForEach-Object should iterated on the said array. However in the first test this does not happen. Why?
Update 2
Is it possible that it's ConvertFrom-Json specific? Like bug/issue?
There is only one rule with regard to pipeline items' unwrapping: all arrays and collections written to the pipeline are always getting unwrapped to the items ("unwrapped one level down" or "unwrapped in a non-recursive fashion" would be more correct statement but for the sake of simplicity we are not going to consider nested arrays so far).
There is still a possibility to override this behavior by using unary comma operator:
$a = 1,2
$a | ForEach-Object{ $_.GetType() }
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Int32 System.ValueType
True True Int32 System.ValueType
,$a | ForEach-Object{ $_.GetType() }
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
In the second case Powershell pipeline engine unwrapped $a but afterwards the result got wrapped back to array by , operator.
As to ConvertFrom-Json case I personally believe that its observed behavior is more predictable as it allows you to capture JSON arrays as a whole by default.
If you are interested in the details, the function Get-WrappedArray in the code below imitates ConvertFrom-Json's behavior:
function Get-WrappedArray {
Begin { $result = #() }
Process { $result += $_ }
End { ,$result }
}
$a | Get-WrappedArray | ForEach-Object{ $_.GetType() }
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
$b = $a | Get-WrappedArray
$b | ForEach-Object{ $_.GetType() }
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Int32 System.ValueType
True True Int32 System.ValueType
If i run the following code in PowerShell ISE
cls
Function XmlTransformaton ($sourceFile, $targetFile, $xsltFile)
{
echo "sourceFile: " + $sourceFile.GetType();
echo "targetFile: $targetFile";
echo "xsltFile: $xsltFile";
}
XmlTransformaton("C:\temp\TransfromTest\Test.rdl", "C:\temp\TransfromTest\Test.rdl", "C:\temp\TransfromTest\Test.xslt");
i get the following output
sourceFile:
+
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
targetFile:
xsltFile:
Why on earth is the first argument of type array? The result of this is that all other parameters are empty!
Because you're passing an array as your first (and only) argument. It looks like you want to be doing this instead:
XmlTransformaton "C:\temp\TransfromTest\Test.rdl" "C:\temp\TransfromTest\Test.rdl" "C:\temp\TransfromTest\Test.xslt"
Which gives:
sourceFile:
+
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True String System.Object
targetFile: C:\temp\TransfromTest\Test.rdl
xsltFile: C:\temp\TransfromTest\Test.xslt
Multiple arguments are passed to functions as Some-Function $param1 $param2 $paramN, no need to use parenthesis and comma separated args - that's how you construct an array
What is the proper way to create an array, hashtable and dictionary?
$array = [System.Collections.ArrayList]#()
$array.GetType() returns ArrayList, OK.
$hashtable = [System.Collections.Hashtable]
$hashtable.GetType() returns RuntimeType, Not OK.
$dictionary = ?
How to create a dictionary using this .NET way?
What is the difference between dictionary and hashtable? I am not sure when I should use one of them.
The proper way (i.e. the PowerShell way) is:
Array:
> $a = #()
> $a.gettype()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Object[] System.Array
Hashtable / Dictionary:
> $h = #{}
> $h.gettype()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Hashtable System.Object
The above should suffice for most dictionary-like scenarios, but if you did explicitly want the type from Systems.Collections.Generic, you could initialise like:
> $d = New-Object 'system.collections.generic.dictionary[string,string]'
> $d.gettype()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Dictionary`2 System.Object
> $d["foo"] = "bar"
> $d | Format-Table -auto
Key Value
--- -----
foo bar
If you want to initialize an array you can use the following code:
$array = #() # empty array
$array2 = #('one', 'two', 'three') # array with 3 values
If you want to initialize hashtable use the following code:
$hashtable = #{} # empty hashtable
$hashtable2 = #{One='one'; Two='two';Three='three'} # hashtable with 3 values
Hashtable and dictionary in Powershell is pretty much the same, so I suggest using hashtable in almost all cases (unless you need to do something in .NET where Dictionary is required)
I was thinking Unknown option is used for binary files concatenation.
http://technet.microsoft.com/en-us/library/dd315299.aspx
Unknown The encoding type is unknown
or invalid. The data can be treated as
binary.
But {Get-Content binary.dat -Encoding Unknown} doesn't return byte array but string array.
PS > $a = Get-Content $PSHOME\WTRInstaller.ico -Encoding Unknown
PS > $b = Get-Content $PSHOME\WTRInstaller.ico -Encoding Byte
PS > $a[0].GetType()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True String System.Object
PS > $b[0].GetType()
IsPublic IsSerial Name BaseType
-------- -------- ---- --------
True True Byte System.ValueType
Even if I convert $a to byte array, it doesn't coincide with $b.
PS > [Text.Encoding]::Unicode.GetBytes($a)
PS > compare $c[0..10] $b[0..10]
InputObject SideIndicator
----------- -------------
10 =>
32 <=
When should 'Unknown' be used?
Uknown is not something that is supplied, but rather something that is returned. System.Text.Encoding is not just for use by powershell. There are many areas in the BCL that accept or return the same enums. Some values are for return, others for supplying.
-Oisin