Im trying to use js best practices, i use js-best-practices then the error /usr/bin/env: «node\r» "no such file" appear and the program don't run
I appreciate any solution you put. Thanks
Looks like your script file has been created on Windows, the file is DOS format (line endings in DOS). So, you may use a module which converts a file to a Unix format :
brew install dos2unix
sudo dos2unix your_script
or use tr command to remove \r from your file:
cat your_script.js | tr -d '\r' > fixed_script.js
P.S. You can also use vim to convert Windows-style to Unix-style:
vim script
:se ff=unix
:wq
Related
System: Arch Linux in VirtualBox 5.1.26 on Windows 10 Host
I try to use perl like sed in the terminal for in place substitution the input file:
perl -i -p -e 's/orig/replace/g' input_file
But I always get:
Can't remove input_file Text file busy, skipping file
This happens only if the file is inside a VirtualBox vboxsf share. With all other tools (sed, mv, vim or whatever) it is no problem to change the file.
This problem seems to be related to:
https://www.virtualbox.org/ticket/2553
https://forums.virtualbox.org/viewtopic.php?t=4437
I can't find any solution googling around :(
Update:
Using perl -i.bak -p -e 's/orig/replace/g' input_file I get a similar message:
Can't rename input_file to input_file.bak: Text file busy, skipping file.
This is exactly the same message as gedit shows:
So it is the same behavior, but googling around I can only find the Gedit topic. It seems noone has noticed this with perl -i.
While you are running a unix OS, you are still using a Windows file system. NTFS doesn't support anonymous files like unix file systems, and Perl -i requires support for anonymous files.
The workaround is to use a temporary files by using -i<ext> (e.g. -i~) instead of -i.
I have same problem. My solution is a bashscript. Copy files to tmp. Search and Replace. Overwrite tmp-files with original-files. Than delete tmp-dir. If you need you can use parameter in script for dynamic search&replace and create an alias for call the script direct and everywhere.
#!/bin/bash
echo "Removing text from .log files..."
echo "Creating tmp-dir..."
mkdir /tmp/myTmpFiles/
echo "Copy .log files to tmp..."
cp -v /home/user/sharedfolder/*.log /tmp/myTmpFiles/
echo "Search and Replace in tmp-files..."
perl -i -p0e 's/orig/replace/g' /tmp/myTmpFiles/*.log
echo "Copy .log to sharedfolder"
cp -v /tmp/myTmpFiles/*.log /home/user/sharedfolder/
echo "Remove tmp-dir..."
rm -vr /tmp/myTmpFiles/
echo "Done..."
I have some files: file1.txt, file2.txt and I would like to rename them like this: file1.something.txt and file2.something.txt
I looked for some similar questions and I come up with this:
for i in file*.txt; do echo mv $i file*.something.txt; done
but unfortunately the output is:
mv file1.txt file*.something.txt
mv file2.txt file*.something.txt
and therefore only 1 file is created.
Could please somebody help?
(I am using a macbook air, I am not sure if this is relevant)
Thank you very much
Try this :
rename -n 's/\.txt/something.txt' *
(remove -n switch when your tests are OK)
There are other tools with the same name which may or may not be able to do this, so be careful.
If you run the following command (GNU)
$ file "$(readlink -f "$(type -p rename)")"
and you have a result like
.../rename: Perl script, ASCII text executable
and not containing:
ELF
then this seems to be the right tool =)
If not, to make it the default (usually already the case) on Debian and derivative like Ubuntu :
$ sudo update-alternatives --set rename /path/to/rename
(replace /path/to/rename to the path of your perl's rename command.
If you don't have this command, search your package manager to install it or do it manually
Last but not least, this tool was originally written by Larry Wall, the Perl's dad.
How can we use wildcard characters while running system command in Perl Script.
For example using *.src to edit a file with sed - something like :
system("sed -i -e 's/foo/bar/g' $baseDirPath/*.src");
It gives an error: sed: can't read /home/test/*.src: Not a Directory
Here, $baseDirPath is initialized to /home/test
Try to chomp the variable $baseDirPath before using it, As the line you have written should just work.
I have this line inside a file:
ULNET-PA,client_sgcib,broker_keplersecurities
,KEPLER
I try to get rid of that ^M (carriage return) character so I used:
sed 's/^M//g'
However this does remove everything after ^M:
[root#localhost tmp]# vi test
ULNET-PA,client_sgcib,broker_keplersecurities^M,KEPLER
[root#localhost tmp]# sed 's/^M//g' test
ULNET-PA,client_sgcib,broker_keplersecurities
What I want to obtain is:
[root#localhost tmp]# vi test
ULNET-PA,client_sgcib,broker_keplersecurities,KEPLER
Use tr:
tr -d '^M' < inputfile
(Note that the ^M character can be input using Ctrl+VCtrl+M)
EDIT: As suggested by Glenn Jackman, if you're using bash, you could also say:
tr -d $'\r' < inputfile
still the same line:
sed -i 's/^M//g' file
when you type the command, for ^M you type Ctrl+VCtrl+M
actually if you have already opened the file in vim, you can just in vim do:
:%s/^M//g
same, ^M you type Ctrl-V Ctrl-M
You can simply use dos2unix which is available in most Unix/Linux systems. However I found the following sed command to be better as it removed ^M where dos2unix couldn't:
sed 's/\r//g' < input.txt > output.txt
Hope that helps.
Note: ^M is actually carriage return character which is represented in code as \r
What dos2unix does is most likely equivalent to:
sed 's/\r\n/\n/g' < input.txt > output.txt
It doesn't remove \r when it is not immediately followed by \n and replaces both with just \n. This fails with certain types of files like one I just tested with.
alias dos2unix="sed -i -e 's/'\"\$(printf '\015')\"'//g' "
Usage:
dos2unix file
If Perl is an option:
perl -i -pe 's/\r\n$/\n/g' file
-i makes a .bak version of the input file
\r = carriage return
\n = linefeed
$ = end of line
s/foo/bar/g = globally substitute "foo" with "bar"
In awk:
sub(/\r/,"")
If it is in the end of record, sub(/\r/,"",$NF) should suffice. No need to scan the whole record.
This is the better way to achieve
tr -d '\015' < inputfile_name > outputfile_name
Later rename the file to original file name.
I agree with #twalberg (see accepted answer comments, above), dos2unix on Mac OSX covers this, quoting man dos2unix:
To run in Mac mode use the command-line option "-c mac" or use the
commands "mac2unix" or "unix2mac"
I settled on 'mac2unix', which got rid of my less-cmd-visible '^M' entries, introduced by an Apple 'Messages' transfer of a bash script between 2 Yosemite (OSX 10.10) Macs!
I installed 'dos2unix', trivially, on Mac OSX using the popular Homebrew package installer, I highly recommend it and it's companion command, Cask.
This is clean and simple and it works:
sed -i 's/\r//g' file
where \r of course is the equivalent for ^M.
Simply run the following command:
sed -i -e 's/\r$//' input.file
I verified this as valid in Mac OSX Monterey.
remove any \r :
nawk 'NF+=OFS=_' FS='\r'
gawk 3 ORS= RS='\r'
remove end of line \r :
mawk2 8 RS='\r?\n'
mawk -F'\r$' NF=1
Does sed -i work on AIX?
If not, how can I edit a file "in place" on AIX?
The -i option is a GNU (non-standard) extension to the sed command. It was not part of the classic interface to sed.
You can't edit in situ directly on AIX. You have to do the equivalent of:
sed 's/this/that/' infile > tmp.$$
mv tmp.$$ infile
You can only process one file at a time like this, whereas the -i option permits you to achieve the result for each of many files in its argument list. The -i option simply packages this sequence of events. It is undoubtedly useful, but it is not standard.
If you script this, you need to consider what happens if the command is interrupted; in particular, you do not want to leave temporary files around. This leads to something like:
tmp=tmp.$$ # Or an alternative mechanism for generating a temporary file name
for file in "$#"
do
trap "rm -f $tmp; exit 1" 0 1 2 3 13 15
sed 's/this/that/' $file > $tmp
trap "" 0 1 2 3 13 15
mv $tmp $file
done
This removes the temporary file if a signal (HUP, INT, QUIT, PIPE or TERM) occurs while sed is running. Once the sed is complete, it ignores the signals while the mv occurs.
You can still enhance this by doing things such as creating the temporary file in the same directory as the source file, instead of potentially making the file in a wholly different file system.
The other enhancement is to allow the command (sed 's/this/that' in the example) to be specified on the command line. That gets trickier!
You could look up the overwrite (shell) command that Kernighan and Pike describe in their classic book 'The UNIX Programming Environment'.
#!/bin/ksh
host_name=$1
perl -pi -e "s/#workerid#/$host_name/g" test.conf
Above will replace #workerid# to $host_name inside test.conf
You can simply install GNU version of Unix commands on AIX :
http://www-03.ibm.com/systems/power/software/aix/linux/toolbox/alpha.html
You can use a here construction with vi:
vi file >/dev/null 2>&1 <<#
:1,$ s/old/new/g
:wq
#
When you want to do things in the vi-edit mode, you will need an ESC.
For an ESC press CTRL-V ESC.
When you use this in a non-interactive mode, vi can complain about the TERM not set. The solution is adding export TERM=vt100 before calling vi.
Another option is to use good old ed, like this:
ed fileToModify <<EOF
,s/^ff/gg/
w
q
EOF
you can use perl to do it :
perl -p -i.bak -e 's/old/new/g' test.txt
is going to create a .bak file.