I am trying to figure out EXM for Sitecore. I installed it and now I am trying to configure it to send emails from my local machine. SAC MTA is not an option because I don't have access to App Center. I am left with custom MTA.
I was trying to configure config files to use gmail smtp:
Sitecore.EDS.Providers.CustomSmtp.config
<smtpSettings type="Sitecore.EDS.Core.Net.Smtp.SmtpSettings, Sitecore.EDS.Core" singleInstance="true">
<server>smtp.gmail.com</server>
<port>465</port>
<userName>*****#gmail.com</userName>
<password>*****</password>
<authenticationMethod>Login</authenticationMethod>
<startTls>true</startTls>
<proxySettings ref="exm/eds/proxySettings" />
</smtpSettings>
Sitecore.EDS.Providers.CustomSmtp.Sync.config
<pop3Settings>
<pop3Setting type="Sitecore.EDS.Core.Net.Pop3.Pop3Settings, Sitecore.EDS.Core" singleInstance="true">
<server>pop.gmail.com</server>
<port>995</port>
<userName>****#gmail.com</userName>
<password>****</password>
<useSsl>true</useSsl>
<startTls>true</startTls>
<proxySettings ref="exm/eds/proxySettings"/>
</pop3Setting>
</pop3Settings>
But when I try to "send quick test" through EXM I get "Failed to connect to the email server. Please try again later". Can anyone help me with that configuration. And is it even possible? I remember reading something about paid license to use custom MTA. Would it mean, that you need to pay to send email via EXM?
To switch from using the Sitecore MTA to using the Custom SMTP, you must disable the Dyn configurations and then enable the CustomSmtp configurations:
In the Website\App_Config\Include\EmailExperience folder, add the suffix .disabled to the end of the following file names:
Sitecore.EDS.Providers.Dyn.config
Sitecore.EDS.Providers.Dyn.Sync.config
In the Website\App_Config\Include\EmailExperience folder, remove the suffix .disabled from the following file names:
Sitecore.EDS.Providers.CustomSmtp.config.disabled
Sitecore.EDS.Providers.CustomSmtp.Sync.config.disabled
Related
In CrafterCMS, I’m trying to configure a mail server, in the documentation I see two different locations to override the related properties:
http://docs.craftercms.org/en/2.5/system-administrators/tmp/installation-guides/configure.html?highlight=workflow
TOMCAT/shared/classes/crafter/cstudio/extension/server-config.properties
http://docs.craftercms.org/en/2.5/system-administrators/studio-configuration.html?highlight=mail%20server
TOMCAT/shared/classes/crafter/engine/extension/studio-server-config.properties
Is this a doc inconsistency or do they have different purposes?
To configure Studio Email capabilities use this file
TOMCAT/shared/classes/crafter/cstudio/extension/server-config.properties
How to I change the monitoring-agent.config to go out via proxy with authentication?
The change log states...
Monitoring Agent 2.3.1.89-1
Released 2014-07-08
Added support for HTTP proxy configuration in the agent configuration file.
But I can't see how to do this.
Following wdberkeley's link I can add this value to the monitoring-agent.config file.
httpProxy=http://"pxproxy01":3128
But this gives..
Failure getting conf. Op: Get Err: Proxy Authentication Required
Is there anyway to set the authentication user/password ?
Edit file:
C:\MMSData\Monitoring\monitoring-agent.config
Add line...
httpProxy=http://<insert_server_address>:<insert_port>
e.g.
httpProxy=http://PROXY01.server.com:3128
Then get the proxy control team, who ever they be, to exclude the following from requiring authentication.
https://mms.mongodb.com 80
https://mms.mongodb.com 443
This has worked for me. I now have the MMS Agent on Windows sending stat's to the MMS service.
Thanks to #wdberkeley for starting me off on this route.
wdberkeley, the page you linked to does not exist & the classic page PDF & HTTP versions state 'HTTP_PROXY' not 'httpproxy' (on OSx section & tar.gz section), section '6.6 Monitoring Agent Configuration' does state the correct property name 'httpproxy'.
I'm trying to send an email using Ansible, but I can't understand how it works as I don't know how to provide user and password for such service (not specified in the documentation).
Both my machine and the email server are in the same network, but I need to be authenticated in order to send the email.
This is my yml file:
---
- name: Testing email
hosts: localhost
tasks:
- name: Send email
local_action: mail
host=mail.server.com
port=993
subject="Ansible test mail"
body="Testing email"
from=my#email
to="y#email
charset=utf8
And this is the related content of the hosts' file:
[localhost]
localhost ansible_connection=local
Any idea about how should I configure it? Thanks in advance.
Looking at the source code for the mail module ( https://github.com/ansible/ansible/blob/d1effecb2ef073e478c67a7ca39cf56708a66a48/library/notification/mail ) it doesn't look like it supports SMTP authentication.
It shouldn't be too hard to add support for it however. It would require adding the username and password parameters to the module, detecting if they've both been supplied, and if so, calling smtp.login() with those parameters.
In fact, it looks like there's two pull requests to do exactly that at the moment here
https://github.com/ansible/ansible/pull/7213
and here
https://github.com/ansible/ansible/pull/6667
So support will most likely be added in dev soon.
Hi i started using osTicket for my helpdesk and i was able to do the Email pipe successfully, but even if the ticket is created, the user receives: Mail delivery failed: returning message to sender.
In osTicket it says to change de exim document, but i have WHM and i don't know how to change it.
Can someone tell me how to change the following using the WHM editor
driver = pipe
return_output
driver = pipe
group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
return_output
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
i need to change the return_output to return_fail_output
Sounds like you need to change your EXIM config file. In WHM, you can go to: Service Configuration -> Exim Configuration and click on 'Advanced Editor' (at the bottom) to have access to it.
I will warn to be careful in there as it may cause issues, but that's where it looks like you'll want to put your rules and such.
I have installed openfire into my mac. In opnefire server information my Server Name is "john-imac.local.lan" and Host Name is "john-imac.local.lan"
I have created two users user123,user234 in there. In my iphone project i have xmpp framework running fine when i use gmail credentials. To connect to openfire i made these changes
[xmppStream setHostName:#"john-imac.local.lan"];
xmppStream.myJID = [XMPPJID jidWithString:#"user123#john-imac.local.lan"];
(void)xmppStreamDidConnect:(XMPPStream *)sender
{
NSLog(#"XMPP DID CONNECT");
[xmppStream authenticateWithPassword:#"user001" error:NULL];
}
I guess these are changes that i need to make in my project to get connected to Openfire. But when i run the application i get this XMPP DID NOT AUTHENTICATE
<failure xmlns="urn:ietf:params:xml:ns:xmpp-sasl"><not-authorized></not-authorized></failure>
What is that i am missing.
I do not think it is a problem in the code. I think it is just a miss configuration in your Openfire sever. First make sure your users and passwords were created correctly in your Openfire. Second check the "Server Name" property if it was set correctly. Go to you admin panel -> Server Information -> Server Name. If this property is not set to "john-imac.local.lan" then your server will fail in authorizing your users. To set it up pressed on the Edit properties button and change the name of your sever.
I hope this helps you solving the problem you are having!
go to Server -》Server Manager -》 System Properties
In the page bottom, there is a form, in “Property name” put “xmpp.fqdn” and in “Property value” put your domain name
Restart openfire