I've installed the Bro IDS but when I try to start the service an error is coming that :
Error: error occurred while trying to send mail: send-mail: SENDMAIL-NOTFOUND not found
starting ...
starting bro ...
bro terminated immediately after starting; check output with "diag"
I've already used broctl install and broctl update but still got the same error.
Kindly help
I've checked the configuration file i.e. node.cfg under /nsm/bro/etc and change the default interface eth0 with my system interface.
now bro has started
Bro can run without sendmail present but you may have been hit by a bug in Bro where it failed to include the Sendmail location in the config files. Whilst it says the bug was supposed to be fixed I've also seen the problem in Bro-2.5. So an easy fix is to do as suggested in the bug report and add the SendMail = /usr/sbin/sendmail to /usr/local/bro/etc/broctl.cfg and then rerun the deployment command:
sudo /usr/local/bro/bin/broctl deploy
Related
I have issue with OTRS version 6 which is running on ubuntu 16.04.
OTRS didn't fetch the mail properly whenever i tried to fetch the mail it through below error
" OTRS-otrs.Console.pl-Maint::PostMaster::MailAccountFetch-77[5799]: [Error][Kernel::System::Daemon::DaemonModules::BaseTaskWorker::_HandleError][Line:52]: There was an error executing Execute() in Kernel::System::Console::Command::Maint::PostMaster::MailAccountFetch: Error: Timeout of 600 seconds reached, killing child process!"
I tried below steps:
Tried to reconfigure fetchmail:bin not success
Tried to add new param in Daemon: "ArtticlIndex rebuild" add new param "--force-pid"
3.Restart the server from remote console
How to fix this issue? please guide me on this.
Does anyone know the solution to this? I am new to this and learning. I am on Macbook Air m1.
This is the end code while running dfx start in the terminal:
thread 'replica-actor' panicked at 'called Result::unwrap() on an Err value: Cannot start the replica: Timeout', src/dfx/src/actors/replica.rs:279:78
note: run with RUST_BACKTRACE=1 environment variable to display a backtrace
This is what happens while running dfx deploy in terminal:
Error: An error happened during communication with the replica: error sending request for url (http://127.0.0.1:8000/api/v2/status): error trying to connect: tcp connect error: Connection refused (os error 61)
Does anyone know anything about this?
Found the solution to the problem. I was running the code while it was stored in an external drive. When I created the same folder on my desktop and ran everything the same way, the problem got solved and I no longer have those errors in my terminal. I don't know how it is happening, but I just discovered it right now.
Try "dfx start --emulator"
I have icinga2 set up on a Ubuntu xenial machine. I'm using postfix to send emails, which is working properly, i.e.
echo "hello world" | mail -s "test subject" sammy#example.com
sends an email as expected.
However, when an icinga sends an email, I find the following error message:
/var/log/icinga2/debug.log
[2017-12-12 02:56:05 +0000] notice/Process: PID 5512 >
('/etc/icinga2/scripts/mail-host-notification.sh' '-4' '$
$a.mydomain.com' (PID: 5512, arguments: '/etc/icinga2/scripts/mail-host-notification.sh' '-4' '127.0.0$
Can't canonicalize "./Maildir"
./Maildir/sent: No such file or directory
Failed to save message in "./Maildir/sent" - message not sent
I know that the error is caused by the Maildir directory not being set up. However, I can't figure out how to determine which user is invoking the mail command. I also don't know what the cwd is set to in ./Maildir/sent.
I would be very grateful if anyone could help me figure out either:
Where to set up the Maildir
How to specify the user that icinga uses so as to know where to set up the Maildir
A better method to get icinga to send emails
Thanks in advance
I was able to get my icinga2 instance to mail properly by creating the Maildir in the / directory and setting the owner:group to nagios:nagios. Currently not sure how to configure this, but it is a working configuration!
I bought a HotPi a while ago, and decided to use it. So I followed the procedure to configure the IR and after a few hours I was able to IR signals on my Raspberry 1.
But my purpose here is to send IR signals, which I tried, without any luck.
So this is the command I try to do (just for test):
irsend SEND_START devinput KEY_POWER ; sleep 3
And this is what lircd tells me:
lircd-0.9.4c[907]: Notice: accepted new client on /var/run/lirc/lircd
lircd-0.9.4c[907]: Info: Cannot configure the rc device for /dev/lirc0
lircd-0.9.4c[907]: Error: invalid send buffer
lircd-0.9.4c[907]: Error: this remote configuration cannot be used to transmit
lircd-0.9.4c[907]: Error: error processing command: SEND_START devinput KEY_POWER
lircd-0.9.4c[907]: Error: transmission failed
lircd-0.9.4c[907]: Info: removed client
Edit:
It seems I'm not using the good drivers. According to the HotPi documentation, I'm suppose to use lirc-rpi, which I'm suppos to install with
sudo modprobe lirc-rpi
Which, at least, doesn't return an error. But trying to configure the interface tells me that the driver doesn't exist:
pi#raspberrypi:~ $ mode2 --driver lirc-rpi --device /dev/lirc0
Driver `lirc-rpi' not found. (Missing -U/--plugins option?)
Available drivers:
accent
alsa_usb
asusdh
atilibusb
atwf83
audio
audio_alsa
awlibusb
bte
bw6130
commandir
creative
creative_infracd
default
devinput
dfclibusb
dsp
dvico
ea65
file
ftdi
ftdi-exp
ftdix
girs
i2cuser
irlink
irtoy
livedrive_midi
livedrive_seq
logitech
macmini
mouseremote
mouseremote_ps2
mp3anywhere
mplay
mplay2
pcmak
pinsys
pixelview
samsung
sb0540
silitek
slinke
sonyir
srm7500libusb
tira
tira_raw
udp
uirt2
uirt2_raw
usb_uirt_raw
usbx
zotac
Here is no info what lirc version you are using. There are vast differences between the legacy 0.9.0 still used in some distros and modern lirc.
That said, the logs seems pretty clear. You are using the devinput driver, right? This driver does not support sending data, reflecting the fact that also the kernel doesn't.
You then need to use another driver - first stop might be the default one. If/when using this other driver, you need another lircd.conf.
Please refer to http://lirc.org/html/configuration-guide.html
EDIT: Ah, lirc-0.9.4c says the log. Sorry, my bad. The reply should still be valid, though.
When you record the remote, use:
irrecord -d /dev/lirc0 -f name.conf
The -f uses raw mode. This then worked for me on the transmit side, before I got same error as you.
I have installed Gnumeric in CentOS 6.5, then use ssconvert command to convert .xls/.xlsx file to CSV, but I still get the following error:
$ ssconvert
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you
have stale NFS locks due to a system crash. See
http://projects.gnome.org/gconf/ for information. (Details - 1: Not
running within active session)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you
have stale NFS locks due to a system crash. See
http://projects.gnome.org/gconf/ for information. (Details - 1: Not
running within active session)
** (ssconvert:5725): WARNING **: Configured default font 'Sans 10.000000' not available, trying fallback...
** (ssconvert:5725): WARNING **: Fallback font 'Sans 10.000000' not available, trying 'fixed'...
** (ssconvert:5725): WARNING **: Even 'fixed 10' failed ?? We're going to exit now,there is something wrong with your font
configuration
Can you help me?
As this is an old question, the answer is in case someone will get the same error (like me today on CentOS 6.8), you missed to install the Sans font:
yum install gnu-free-sans-fonts
For docker alpine images this might help:
RUN apk add --update \
msttcorefonts-installer fontconfig \
ttf-opensans