Getting IP floating right for HAproxy/Keepalived - haproxy

Question

This is all new to me. Please bear with me. Sorry if I don't phrase my problem correctly. I'd like to set ip floating to use HAproxy and Keepalived.
I have the following ips:
LB1: 192.168.1.27 #first load balancer
LB2: 192.168.1.32 #second load balancer
www1: 192.168.1.28 #first web server
www2: 192.168.1.29 #second web server
floating ip: 192.168.1.200
When I turn off load balancer 1 (LB1), traffic is not getting redirected to floating ip. I don't know what to check so I can make this whole setup run successfully. I suspect that LB2 is the problem (apart from me:)) as the floating ip doesn't do its job when LB1 is down.
I also followed the checking process section on the link below '8. Verify proper failover' but to no avail:
How to create Floating IP and use it to configure HAProxy.
Individually, the 5 ips work fine only when HAproxy is on. That's all I can say.
Could you please help me? Thanks.
EDIT
My config:
HAPROXY INSTALL on lb1
global
log 127.0.0.1 local2
daemon
stats socket /run/haproxy/admin.sock mode 660 level admin
stats timeout 30s
user haproxy
group haproxy
defaults
log global
mode http
option httplog
timeout connect 5000
timeout client 50000
timeout server 50000
retries 3
errorfile 400 /etc/haproxy/errors/400.http
errorfile 403 /etc/haproxy/errors/403.http
errorfile 408 /etc/haproxy/errors/408.http
errorfile 500 /etc/haproxy/errors/500.http
errorfile 502 /etc/haproxy/errors/502.http
errorfile 503 /etc/haproxy/errors/503.http
errorfile 504 /etc/haproxy/errors/504.http
listen stats
bind :1936
stats enable
stats hide-version
stats realm Loadbalanced\ Servers
stats uri /haproxy?stats
stats auth haproxy:haproxy
frontend http-in
bind *:80
default_backend webservers
backend webservers
balance roundrobin
option httpchk GET /haproxy_check
stick-table type ip size 20k peers mypeer
server www1 192.168.1.28:80 cookie LSW_WWW1 check inter 500 fall 3 rise 2
server www2 192.168.1.29:80 cookie LSW_WWW2 check inter 500 fall 3 rise 2
peers mypeer
peer lb1hostname 192.168.1.27:1024
peer lb2hostname 192.168.1.32:1024 backup
HAPROXY install on lb2:
global
log 127.0.0.1 local2
daemon
stats socket /run/haproxy/admin.sock mode 660 level admin
stats timeout 30s
user haproxy
group haproxy
defaults
log global
mode http
option httplog
timeout connect 5000
timeout client 50000
timeout server 50000
retries 3
errorfile 400 /etc/haproxy/errors/400.http
errorfile 403 /etc/haproxy/errors/403.http
errorfile 408 /etc/haproxy/errors/408.http
errorfile 500 /etc/haproxy/errors/500.http
errorfile 502 /etc/haproxy/errors/502.http
errorfile 503 /etc/haproxy/errors/503.http
errorfile 504 /etc/haproxy/errors/504.http
listen stats
bind :1936
stats enable
stats hide-version
stats realm Loadbalanced\ Servers
stats uri /haproxy?stats
stats auth haproxy:haproxy
frontend http-in
bind *:80
default_backend webservers
backend webservers
balance roundrobin
option httpchk GET /haproxy_check
server www1 192.168.1.28:80 cookie LSW_WWW1 check inter 500 fall 3 rise 2
server www2 192.168.1.29:80 cookie LSW_WWW2 check inter 500 fall 3 rise 2
KEEPALIVED ON LB1
vrrp_script chk_haproxy {
script "pidof haproxy"
interval 2}
vrrp_instance VI_1 {
interface eth0
state MASTER
virtual_router_id 51
priority 200
virtual_ipaddress {
192.168.1.200
}
track_script {
chk_haproxy
}}
KEEPALIVED ON LB2
vrrp_script chk_haproxy {
script "pidof haproxy"
interval 2}
vrrp_instance VI_1 {
interface eth0
state BACKUP
virtual_router_id 51
priority 100
virtual_ipaddress {
192.168.1.200
}
track_script {
chk_haproxy
}}
On LB1 and LB2, in Keepalived:
nano /etc/sysctl.conf
added net.ipv4.ip_nonlocal_bind=1
sysctl -p
on lb1:
sudo service keepalived alived stop
then checked if lb2 is working. It is!!! But when Haproxy on LB1 is down, traffic still doesn't get redirected to LB2.

Answer 1

It could indicate problem with arp update when failover ip, check arp table on your devices if floating ip points to lb2 mac addr