I am using Tera Term V4.92
I create a TTL script to lunch Tera Term and connect to the COM Port 10
;;
;; Connection via COM port
;;
connect '/C=10'
;;
;; The timeout limit is 1 min.
;;
timeout = 60
;;
;; Pauses until one of the timeout occurs.
;;
;;
waitevent 1
;;
;; Closes Tera Term
;;
closett
;;
;; Quits the execution of the macro.
;;
;;end
My script run perfectly but I want to disable a window lunched with Tera Term at the same time Titled 'MACRO - SCRIPT.TTL'
Any help please
regards
AAG
From your question, I believe that you wanted to either minimize or hide the Macro box. This can be easily done with the use of show command.
;;
;; Connection via COM port
;;
connect '/C=10'
show -1
;;
;; The timeout limit is 1 min.
;;
timeout = 60
;;
;; Pauses until one of the timeout occurs.
;;
;;
waitevent 1
;;
;; Closes Tera Term
;;
closett
;;
;; Quits the execution of the macro.
;;
;;end
You may refer here: https://ttssh2.osdn.jp/manual/en/macro/command/show.html
Hope that this answers you. Have a nice day.
Related
I've noticed that when I execute ess-eval-line-visibly-and-step inside an R-mode buffer and I don't already have an active R session, it will split the screen (good), however it will show both sides of the split into the R session (bad). I would expect it to split the screen and show the R session on one side (ideally the right) and leave the R-mode buffer on the other side (ideally the left).
The only bit of my init.el referencing ESS is
(use-package ess
:ensure t
:defer t
:config
(setq ess-ask-for-ess-directory nil ;; just run R wherever
;; the file lives
ess-history-file nil ;; don't save history
ess-eval-visibly-p nil ;; when running R, don't
;; show code, just output
;; (greatly speeds
;; running)
inferior-R-args
"--no-restore --no-save --quiet" ;; R startup conditions
ess-style 'RStudio ;; better indenting
comint-scroll-to-bottom-on-input t ;; force ESS to scroll R
;; to the bottom after
;; running code
comintq-scroll-to-bottom-on-output t
comint-scroll-show-maximum-output t
comint-move-point-for-output t))
I've commented out all the setq and it doesn't fix the issue.
I have an issue with using the following emacs indentation option
setq verilog-cexp-indent
I want to set it to 4 to apply for 1 line if-else, for, case .. etc
But when I do, it indents the module keyword.
Can I exclude the "module keyword" from this or is there a better way to do it ?
You should look at the instructions to Verilog mode. To do that, do M-x find-library<RET>verilog-mode<RET>. In there you'll see (amongst other information):
;; ;; User customization for Verilog mode
;; (setq verilog-indent-level 3
;; verilog-indent-level-module 3
;; verilog-indent-level-declaration 3
;; verilog-indent-level-behavioral 3
;; verilog-indent-level-directive 1
;; verilog-case-indent 2
;; verilog-auto-newline t
;; verilog-auto-indent-on-newline t
;; verilog-tab-always-indent t
;; verilog-auto-endcomments t
;; verilog-minimum-comment-distance 40
;; verilog-indent-begin-after-if t
;; verilog-auto-lineup 'declarations
;; verilog-linter "my_lint_shell_command"
;; )
i am new to spacemacs and i add neo tree and want to show out it with icons style, but i tried many things it just show me some bunch of code.
here is my file of .spacemacs
i will be very appreciate
i add install all-the-icons at dotspacemacs-additional-packages and put (setq neo-theme 'icons) at user config like wiki told but still no result
here is the link i follow
;; -*- mode: emacs-lisp -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
(defun dotspacemacs/layers ()
"Configuration Layers declaration.
You should not put any user code in this function besides modifying the variable
values."
(setq-default
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; Lazy installation of layers (i.e. layers are installed only when a file
;; with a supported type is opened). Possible values are `all', `unused'
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
;; lazy install any layer that support lazy installation even the layers
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
;; installation feature and you have to explicitly list a layer in the
;; variable `dotspacemacs-configuration-layers' to install it.
;; (default 'unused)
dotspacemacs-enable-lazy-installation 'unused
;; If non-nil then Spacemacs will ask for confirmation before installing
;; a layer lazily. (default t)
dotspacemacs-ask-for-lazy-installation t
;; If non-nil layers with lazy install support are lazy installed.
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load.
dotspacemacs-configuration-layers
'(
html
python
javascript
;; ----------------------------------------------------------------
;; Example of useful layers you may want to use right away.
;; Uncomment some layer names and press <SPC f e R> (Vim style) or
;; <M-m f e R> (Emacs style) to install them.
;; ----------------------------------------------------------------
helm
;;auto-completion
;; better-defaults
emacs-lisp
git
markdown
org
;; (shell :variables
;; shell-default-height 30
;; shell-default-position 'bottom)
;;spell-checking
;; syntax-checking
;; version-control
)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'
dotspacemacs-additional-packages '(all-the-icons spaceline-all-the-icons ox-reveal)
;; A list of packages that cannot be updated.
dotspacemacs-frozen-packages '()
;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '()
;; Defines the behaviour of Spacemacs when installing packages.
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
;; `used-only' installs only explicitly used packages and uninstall any
;; unused packages as well as their unused dependencies.
;; `used-but-keep-unused' installs only the used packages but won't uninstall
;; them if they become unused. `all' installs *all* packages supported by
;; Spacemacs and never uninstall them. (default is `used-only')
dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
"Initialization function.
This function is called at the very startup of Spacemacs initialization
before layers configuration.
You should not put any user code in there besides modifying the variable
values."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
dotspacemacs-elpa-timeout 30
;; If non nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'.
dotspacemacs-elpa-subdirectory nil
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style 'vim
;; If non nil output loading progress in `*Messages*' buffer. (default nil)
dotspacemacs-verbose-loading nil
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `bookmarks' `projects' `agenda' `todos'."
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
dotspacemacs-startup-lists '((recents . 5)
(projects . 7))
;; True if the home buffer should respond to resize events.
dotspacemacs-startup-buffer-responsive t
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press <SPC> T n to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(spacemacs-dark
spacemacs-light)
;; If non nil the cursor color matches the state color in GUI Emacs.
dotspacemacs-colorize-cursor-according-to-state t
;; Default font, or prioritized list of fonts. `powerline-scale' allows to
;; quickly tweak the mode-line size to make separators look not too crappy.
dotspacemacs-default-font '("Source Code Pro"
:size 18
:weight normal
:width normal
:powerline-scale 1.1)
;; The leader key
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands (M-x) (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m")
dotspacemacs-major-mode-emacs-leader-key "C-M-m"
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs C-i, TAB and C-m, RET.
;; Setting it to a non-nil value, allows for separate commands under <C-i>
;; and TAB or <C-m> and RET.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; If non nil `Y' is remapped to `y$' in Evil states. (default nil)
dotspacemacs-remap-Y-to-y$ nil
;; If non-nil, the shift mappings `<' and `>' retain visual state if used
;; there. (default t)
dotspacemacs-retain-visual-state-on-shift t
;; If non-nil, J and K move lines up and down when in visual mode.
;; (default nil)
dotspacemacs-visual-line-move-text nil
;; If non nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
;; (default nil)
dotspacemacs-ex-substitute-global nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non nil then the last auto saved layouts are resume automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non nil, `helm' will try to minimize the space it uses. (default nil)
dotspacemacs-helm-resize nil
;; if non nil, the helm header is hidden when there is only one source.
;; (default nil)
dotspacemacs-helm-no-header nil
;; define the position to display `helm', options are `bottom', `top',
;; `left', or `right'. (default 'bottom)
dotspacemacs-helm-position 'bottom
;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
;; in all non-asynchronous sources. If set to `source', preserve individual
;; source settings. Else, disable fuzzy matching in all sources.
;; (default 'always)
dotspacemacs-helm-use-fuzzy 'always
;; If non nil the paste micro-state is enabled. When enabled pressing `p`
;; several times cycle between the kill ring content. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; If non nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup t
;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non nil unicode symbols are displayed in the mode line. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Control line numbers activation.
;; If set to `t' or `relative' line numbers are turned on in all `prog-mode' and
;; `text-mode' derivatives. If set to `relative', line numbers are relative.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; (default nil)
dotspacemacs-line-numbers nil
;; Code folding method. Possible values are `evil' and `origami'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil smartparens-strict-mode will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc…
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
;; (default '("ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
;; The default package repository used if no explicit repository has been
;; specified with an installed package.
;; Not used for now. (default nil)
dotspacemacs-default-package-repository nil
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed'to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
))
(defun dotspacemacs/user-init ()
"Initialization function for user code.
It is called immediately after `dotspacemacs/init', before layer configuration
executes.
This function is mostly useful for variables that need to be set
before packages are loaded. If you are unsure, you should try in setting them in
`dotspacemacs/user-config' first."
)
(defun dotspacemacs/user-config ()
"Configuration function for user code.
This function is called at the very end of Spacemacs initialization after
layers configuration.
This is the place where most of your configurations should be done. Unless it is
explicitly specified that a variable should be set before a package is loaded,
you should place your code here."
(setq neo-theme 'icons)
)
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(package-selected-packages
(quote
(doom-themes spaceline-all-the-icons smeargle orgit org-projectile org-category-capture org-present org-pomodoro alert log4e gntp org-mime org-download mmm-mode markdown-toc markdown-mode magit-gitflow htmlize helm-gitignore helm-company helm-c-yasnippet gnuplot gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md fuzzy flyspell-correct-helm flyspell-correct evil-magit magit magit-popup git-commit ghub with-editor company-web web-completion-data company-tern tern company-statistics company-anaconda company auto-yasnippet auto-dictionary auto-complete ox-reveal web-mode tagedit slim-mode scss-mode sass-mode pug-mode helm-css-scss haml-mode emmet-mode yapfify pyvenv pytest pyenv-mode py-isort pip-requirements live-py-mode hy-mode dash-functional helm-pydoc cython-mode anaconda-mode pythonic web-beautify livid-mode skewer-mode simple-httpd json-mode json-snatcher json-reformat js2-refactor yasnippet multiple-cursors js2-mode js-doc coffee-mode clojure-mode org-plus-contrib all-the-icons memoize ws-butler winum which-key volatile-highlights vi-tilde-fringe uuidgen use-package toc-org spaceline powerline restart-emacs request rainbow-delimiters popwin persp-mode pcre2el paradox spinner org-bullets open-junk-file neotree move-text macrostep lorem-ipsum linum-relative link-hint indent-guide hydra hungry-delete hl-todo highlight-parentheses highlight-numbers parent-mode highlight-indentation helm-themes helm-swoop helm-projectile helm-mode-manager helm-make projectile pkg-info epl helm-flx helm-descbinds helm-ag google-translate golden-ratio flx-ido flx fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state smartparens evil-indent-plus evil-iedit-state iedit evil-exchange evil-escape evil-ediff evil-args evil-anzu anzu evil goto-chg undo-tree eval-sexp-fu highlight elisp-slime-nav dumb-jump f dash s diminish define-word column-enforce-mode clean-aindent-mode bind-map bind-key auto-highlight-symbol auto-compile packed aggressive-indent adaptive-wrap ace-window ace-link ace-jump-helm-line helm avy helm-core popup async))))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
Disclaimer: I'm quite new to spacemacs and emacs so I'm probably missing something very obvious. Whenever I attempt to use auto-complete in a javascript file (with js2-mode), I get the following messages:
Error running timer `ac-update-greedy': (error "js2-name-node-name accessing a non-js2-name-node")
Error running timer `ac-show-menu': (error "js2-name-node-name accessing a non-js2-name-node")
Here's my ~/.spacemacs file:
(defun dotspacemacs/layers ()
"Configuration Layers declaration.
You should not put any user code in this function besides modifying the variable
values."
(setq-default
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load. If it is the symbol `all' instead
;; of a list then all discovered layers will be installed.
dotspacemacs-configuration-layers
'(
;; ----------------------------------------------------------------
;; Example of useful layers you may want to use right away.
;; Uncomment some layer names and press <SPC f e R> (Vim style) or
;; <M-m f e R> (Emacs style) to install them.
;; ----------------------------------------------------------------
;; auto-completion
;; better-defaults
emacs-lisp
git
github
markdown
;; org
;; (shell :variables
;; shell-default-height 30
;; shell-default-position 'bottom)
spell-checking
syntax-checking
version-control
react
javascript
osx
company-mode
spotify
emoji
;; autocompletion
colors
semantic
)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'.
dotspacemacs-additional-packages '(
auto-complete
ac-js2
tern-auto-complete
)
;; A list of packages and/or extensions that will not be install and loaded.
dotspacemacs-excluded-packages '(company)
;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
;; are declared in a layer which is not a member of
;; the list `dotspacemacs-configuration-layers'. (default t)
dotspacemacs-delete-orphan-packages t))
(defun dotspacemacs/init ()
"Initialization function.
This function is called at the very startup of Spacemacs initialization
before layers configuration.
You should not put any user code in there besides modifying the variable
values."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
dotspacemacs-elpa-timeout 5
;; If non nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. (default t)
dotspacemacs-check-for-update t
;; One of `vim', `emacs' or `hybrid'. Evil is always enabled but if the
;; variable is `emacs' then the `holy-mode' is enabled at startup. `hybrid'
;; uses emacs key bindings for vim's insert mode, but otherwise leaves evil
;; unchanged. (default 'vim)
dotspacemacs-editing-style 'vim
;; If non nil output loading progress in `*Messages*' buffer. (default nil)
dotspacemacs-verbose-loading nil
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; List of items to show in the startup buffer. If nil it is disabled.
;; Possible values are: `recents' `bookmarks' `projects'.
;; (default '(recents projects))
dotspacemacs-startup-lists '(recents projects)
;; Number of recent files to show in the startup buffer. Ignored if
;; `dotspacemacs-startup-lists' doesn't include `recents'. (default 5)
dotspacemacs-startup-recent-list-size 5
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press <SPC> T n to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(spacemacs-dark
spacemacs-light
solarized-light
solarized-dark
leuven
monokai
zenburn)
;; If non nil the cursor color matches the state color in GUI Emacs.
dotspacemacs-colorize-cursor-according-to-state t
;; Default font. `powerline-scale' allows to quickly tweak the mode-line
;; size to make separators look not too crappy.
dotspacemacs-default-font '("Source Code Pro"
:size 13
:weight normal
:width normal
:powerline-scale 1.1)
;; The leader key
dotspacemacs-leader-key "SPC"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m)
dotspacemacs-major-mode-emacs-leader-key "C-M-m"
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs C-i, TAB and C-m, RET.
;; Setting it to a non-nil value, allows for separate commands under <C-i>
;; and TAB or <C-m> and RET.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; (Not implemented) dotspacemacs-distinguish-gui-ret nil
;; The command key used for Evil commands (ex-commands) and
;; Emacs commands (M-x).
;; By default the command key is `:' so ex-commands are executed like in Vim
;; with `:' and Emacs commands are executed with `<leader> :'.
dotspacemacs-command-key ":"
;; If non nil `Y' is remapped to `y$'. (default t)
dotspacemacs-remap-Y-to-y$ t
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non nil then the last auto saved layouts are resume automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non nil then `ido' replaces `helm' for some commands. For now only
;; `find-files' (SPC f f), `find-spacemacs-file' (SPC f e s), and
;; `find-contrib-file' (SPC f e c) are replaced. (default nil)
dotspacemacs-use-ido nil
;; If non nil, `helm' will try to minimize the space it uses. (default nil)
dotspacemacs-helm-resize nil
;; if non nil, the helm header is hidden when there is only one source.
;; (default nil)
dotspacemacs-helm-no-header nil
;; define the position to display `helm', options are `bottom', `top',
;; `left', or `right'. (default 'bottom)
dotspacemacs-helm-position 'bottom
;; If non nil the paste micro-state is enabled. When enabled pressing `p`
;; several times cycle between the kill ring content. (default nil)
dotspacemacs-enable-paste-micro-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; If non nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non nil unicode symbols are displayed in the mode line. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters the
;; point when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; If non nil line numbers are turned on in all `prog-mode' and `text-mode'
;; derivatives. If set to `relative', also turns on relative line numbers.
;; (default nil)
dotspacemacs-line-numbers nil
;; If non-nil smartparens-strict-mode will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non nil advises quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
;; (default '("ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
;; The default package repository used if no explicit repository has been
;; specified with an installed package.
;; Not used for now. (default nil)
dotspacemacs-default-package-repository nil
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed'to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
))
(defun dotspacemacs/user-init ()
"Initialization function for user code.
It is called immediately after `dotspacemacs/init', before layer configuration
executes.
This function is mostly useful for variables that need to be set
before packages are loaded. If you are unsure, you should try in setting them in
`dotspacemacs/user-config' first."
(setq ac-js2-evaluate-calls t)
(setq projectile-switch-project-action 'neotree-projectile-action)
(setq neo-smart-open t)
(setq tab-width 2)
(setq-default indent-tabs-mode nil)
(setq-default js2-basic-offset 2)
(setq-default git-magit-status-fullscreen t)
(setq js-indent-level 2)
)
(defun dotspacemacs/user-config ()
"Configuration function for user code.
This function is called at the very end of Spacemacs initialization after
layers configuration.
This is the place where most of your configurations should be done. Unless it is
explicitly specified that a variable should be set before a package is loaded,
you should place your code here."
(add-to-list 'auto-mode-alist '("\\.js$\\'" . js2-mode))
(add-hook 'js2-mode-hook 'ac-js2-mode)
(projectile-global-mode)
(evil-leader/set-key "n" 'neotree-toggle)
(global-git-commit-mode t)
(ac-config-default)
(tern-ac-setup)
;; Vim key bindings
(evil-leader/set-key
"ci" 'evilnc-comment-or-uncomment-lines
"cl" 'evilnc-quick-comment-or-uncomment-to-the-line
"cc" 'evilnc-copy-and-comment-lines
"cp" 'evilnc-comment-or-uncomment-paragraphs
"cr" 'comment-or-uncomment-region
"cv" 'evilnc-toggle-invert-comment-line-by-line
"\\" 'evilnc-comment-operator ; if you prefer backslash key
)
(setq-default dotspacemacs-configuration-layers '(
(colors :variables colors-enable-rainbow-identifiers t)))
)
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(paradox-github-token t)
'(git-gutter:update-interval 2)
)
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
However, auto-complete does appear to work in emacs-lisp (discovered when editing the spacemacs config file.
If you installed full version of spacemacs and use vim editing style:
1. use <spc> f e d to open .spacemacs file
2. find dotspacemacs-configuration-layers,this should be a list of layers
3. auto-completionshould already be in the list, but commented out. Just enable it by remove the comment mark before.
4. in normal mode, invoke <spc> f e R to install required packages, or simply restart emacs
I'm having a hard time making this emacs -nw work effectively under the terminal mode (emacs -nw).
Some setup information:
The working server is connected via SSH, and emacs is running on the server. Usually I'm connecting using SSH and "emacs -nw" to work on my files.
The emacs config is picked up from: https://hugoheden.wordpress.com/2009/03/08/copypaste-with-emacs-in-terminal/
;; make mouse selection to be emacs region marking
(require 'mouse)
(xterm-mouse-mode t)
(defun track-mouse (e))
(setq mouse-sel-mode t)
;; enable clipboard in emacs
(setq x-select-enable-clipboard t)
;; enable copy/paste between emacs and other apps (terminal version of emacs)
(unless window-system
(when (getenv "DISPLAY")
;; Callback for when user cuts
(defun xsel-cut-function (text &optional push)
;; Insert text to temp-buffer, and "send" content to xsel stdin
(with-temp-buffer
(insert text)
;; I prefer using the "clipboard" selection (the one the
;; typically is used by c-c/c-v) before the primary selection
;; (that uses mouse-select/middle-button-click)
(call-process-region (point-min) (point-max) "xsel" nil 0 nil "--clipboard" "--input")))
;; Call back for when user pastes
(defun xsel-paste-function()
;; Find out what is current selection by xsel. If it is different
;; from the top of the kill-ring (car kill-ring), then return
;; it. Else, nil is returned, so whatever is in the top of the
;; kill-ring will be used.
(let ((xsel-output (shell-command-to-string "xsel --clipboard --output")))
(unless (string= (car kill-ring) xsel-output)
xsel-output )))
;; Attach callbacks to hooks
(setq interprogram-cut-function 'xsel-cut-function)
(setq interprogram-paste-function 'xsel-paste-function)
;; Idea from
;; http://shreevatsa.wordpress.com/2006/10/22/emacs-copypaste-and-x/
;; http://www.mail-archive.com/help-gnu-emacs#gnu.org/msg03577.html
))
The reason to have:
(require 'mouse)
(xterm-mouse-mode t)
(defun track-mouse (e))
(setq mouse-sel-mode t)
is to enable mouse selection over text such that the text region is highlighted just as "C-x SPC" marking the region. Then I can use "M-x w" to copy and "C-x y" to paste text within emacs and between emacs and other apps.
All look perfect except that any operations related to X are REALLY SLOW! My connection to the remote server is smooth -- the latency is usually under 100ms. But to kill one line of text using "C-x k", it takes ~5 seconds! To paste it, it takes another 5 seconds!
When copy/paste is frequent sometimes, this becomes really annoying. I think this is related to the X sever messaging, but not sure if there is good way to fix this.
Any ideas?
Thanks!
This is not an ideal solution per se, but i figured out a way that I feel better than the previous one.
The idea is to get rid of X which causes heavy latency issues, i.e. keep only the following:
;; enable clipboard in emacs
(setq x-select-enable-clipboard t)
The results are:
copy/paste within Emacs is straightforward and fast.
copy from other apps to Emacs: Ctrl+Shift+v
copy from Emacs to other apps: mouse selection is now on X Selection, so right-click and copy shall copy the text into the Selection. Note that 'M-w" now won't copy anything into Selection or system clipboard.
This is again a compromise rather than a solution, but considering the fact that i copy/paste more often than inter-app operations, this is acceptable at the moment.
Still looking forward to a good solution!
You can accomplish this by using a terminal escape code!
There is a unique category of terminal escape codes called "Operating System Controls" (OSC) and one of these sequences (\033]52) is meant for interacting with the system clipboard. The great thing is that your terminal doesn't care where the code came from so it will work in remote sessions as well.
Most terminal emulators support it (iTerm2, OS X Terminal, and I think all Linux terminals besides GNOME). You can test if your terminal supports this sequence by simply running:
$ printf "\033]52;c;$(printf "Hello, world" | base64)\a"
Then paste from your system clipboard. If it pastes "Hello, world" then your terminal supports it!
I have this function in my init.el so when I call yank-to-clipboard Emacs will yank the value from my kill ring into the system clipboard:
(defun yank-to-clipboard ()
"Use ANSI OSC 52 escape sequence to attempt clipboard copy"
(interactive)
(send-string-to-terminal
(format "\033]52;c;%s\a"
(base64-encode-string
(encode-coding-string
(substring-no-properties
(nth 0 kill-ring)) 'utf-8) t))))
As I type this, I stumbled upon an almost-identical script supported by Chromium community: https://chromium.googlesource.com/apps/libapps/+/master/hterm/etc/osc52.el
For those running Emacs inside Tmux:
Tmux consumes the sequence, so you'll need to pipe the sequence to the Tmux active tty for this to work. I have a solution in my blog post here: https://justinchips.medium.com/have-vim-emacs-tmux-use-system-clipboard-4c9d901eef40
To extend on #justinokamoto's answer for use in tmux, it works great and is truly amazing. I haven't debugged it with e.g. tramp or other fancy emacs settings but to get it to work
Follow https://sunaku.github.io/tmux-yank-osc52.html great instructions, modifying your tmux.conf and ~/bin/yank
Make sure terminal access to your clipboard is enabled on your terminal
Then to pull into emacs you can use a function like:
(Caveat emptor, I am very new to elisp. This writes to a temporary file in /tmp/yank)
(defun custom-terminal-yank (&rest args)
(message "-> CLIP")
;; FOR EVIL MODE: UNCOMMENT SO FIRST YANKS TO KILL RING
;; need to yank first, with all those args
;; ;; https://emacs.stackexchange.com/questions/19215/how-to-write-a-transparent-pass-through-function-wrapper
;; (interactive (advice-eval-interactive-spec
;; (cadr (interactive-form #'evil-yank))))
;; (apply #'evil-yank args)
;; https://stackoverflow.com/questions/27764059/emacs-terminal-mode-how-to-copy-and-paste-efficiently
;; https://sunaku.github.io/tmux-yank-osc52.html
(f-write-text (nth 0 kill-ring) 'utf-8 "/tmp/yank")
(send-string-to-terminal (shell-command-to-string "~/bin/yank /tmp/yank"))
)
If anyone else uses evil mode as well (just to make things complicated) you can uncomment those lines and use something like
(define-key evil-visual-state-map "Y" 'jonah-terminal-yank)
So that normal "y" is for normal yanking in visual mode, but "Y" is for cross-clipboard yanking