The above error showed up when I tried to install matcaffe in ubuntu. I switched to caffe root directory, and ran the following commands:
$ cd /home/naved/Desktop/caffe-master
$ make all matcaffe
$ make mattest
My matlab version is 2011a.
After running make mattest, the error above showed up.
What should I do to solve this problem?
I believe that the functionality for custom unit test caffe(and specifically the package matlab.unittest.TestCase) was introduced in version R2015a of MATLAB, and that if you're on an older version it won't be available
Related
I am trying to install Lustre on CentOS 7. I followed this link. When I try to run sh ./autogen.sh to generate the configure script I get the above error as illustrated below.
[root#localhost lustre-release]# sh ./autogen.sh
configure.ac:10: installing 'config/config.guess'
configure.ac:10: installing 'config/config.sub'
configure.ac:12: installing 'config/install-sh'
configure.ac:12: installing 'config/missing'
autoMakefile.am:127: error: SERVER does not appear in AM_CONDITIONAL
libcfs/libcfs/autoMakefile.am: installing 'config/depcomp'
Does anyone know how I can resolve this?
To build lustre from git use "autogen.sh" in the top level directory to setup the build environment:
$ bash autogen.sh
libcfs/libcfs/autoMakefile.am: installing 'config/depcomp'
$
Did you try downloading a pre-built package from https://downloads.whamcloud.com/public/lustre/ ? That is usually the easiest compared to building your own.
If you want to build your own Lustre code, which version of the source are you using? The latest code is available at git.whamcloud.com. Most users should use the LTS release (b2_10 branch currently), but if you are doing new development you should use the master branch.
I am trying to compile matconvnet-1.0-beta20 with Matlab 2016a on Ubuntu 16.04. Initial phase of compilation works fine:
untar('http://www.vlfeat.org/matconvnet/download/matconvnet-1.0-beta20.tar.gz') ;
cd matconvnet-1.0-beta20
run matlab/vl_compilenn
The error happens when I run vl_simplenn(network, image) which gives following error:
Invalid MEX-file '/home/matconvnet-1.0-beta20/matlab/mex/vl_nnconv.mexa64':
/usr/local/MATLAB/R2016a/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6: version
`GLIBCXX_3.4.21' not found (required by /home/matconvnet-1.0-beta20/matlab/mex/vl_nnconv.mexa64)
To understand the cause of problem, I run /usr/lib/x86_64-linux-gnu/libstdc++.so.6 | grep GLIBC which doesn't give any output bash: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: Permission denied
Also more /usr/lib/x86_64-linux-gnu/libstdc++.so.6 gives no output:
******** /usr/lib/x86_64-linux-gnu/libstdc++.so.6: Not a text file ********
I did some research and found some possible solutions:
http://it.mathworks.com/matlabcentral/newsreader/view_thread/162466
The problem is that MATLAB secretly changes LD_LIBRARY_PATH on startup
to point to the MATLAB version of GLIBC++, so that GLIBC++ 3.4.9 can
no longer be found. The solution is to modify matlab/bin/.matlab7rc.sh
so that "LDPATH_PREFIX" contains the path to the version of GLIB
installed with your compiler, then this is found before the
matlab-supplied library.
so I edited /usr/local/MATLAB/R2016a/bin/.matlab7rc.sh and modified LDPATH_PREFIX='' in 195th line to LDPATH_PREFIX='/usr/lib/x86_64-linux-gnu'.
After applying this change, the problem still exist.
As suggested here, I copied .matlab7rc.sh to current working directory of project, but still error persist.
https://askubuntu.com/questions/719028/version-glibcxx-3-4-21-not-found
According to first answer, running this command
ln -s /usr/lib/x86_64-linux-gnu/libstdc++.so.6 usr/local/MATLAB/R2014a/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6
gives an error:
ln: failed to create symbolic link 'usr/local/MATLAB/R2014a/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6': No such file or directory
Seems like second solution suggests changes of LD_PRELOAD path in .matlab7rc.sh, but it is not anywhere inside the file.
How to tell mex to link with the libstdc++.so.6 in /usr/lib instead of the one in the MATLAB directory?
From Matlab directory in /usr/local/MATLAB/R2016a/bin$ I run
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/x86_64-linux-gnu/libstdc++.so.6
but the problem still exist.
Maybe there I didn't apply the solution in the correct way Or maybe there is another solution elsewhere that I didn't find. Please let me know, I am very confused!!!
You need before execute (matlab in my case) add path of library:
In console execute this:
LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libstdc++.so.6 matlab
I had the same problem.
In my case, to solve it, I first ran "locate" to list all the possible versions of the library in the system.
locate libstdc++
As an example, I report the result on my system
I then set the most recent version of "lib" by exporting the environment variable:
export LD_PRELOAD="/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21"
So, the fullpath of the library to be set depends on where it is allocated in your system.
There are 2 possible solutions:
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/x86_64-linux-gnu/libstdc++.so.6
Install this package:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
MAYBE the second solution you mentioned really works, but you have done it before. So you cannot operate in the same way again because you have ever linked /usr/lib/x86_64-linux-gnu/libstdc++.so.6 to usr/local/MATLAB/R2014a/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6. TRY rebooting?
Also, you use MATLAB R2016a, but this command applies to R2014a. Was it that you ignore this point?
The error is:
Error using mxlpsolve
Failed to initialise lpsolve library.
I run the
Makefile.m
in the folder and the compiliation, it says everything compiled fine. Where do i need to put mslpsolve and where do i find it?
I used the following guide to solve the same problem:
http://lp-solve.2324885.n4.nabble.com/Fwd-Re-lpsolve-in-MATLAB-on-Mac-OS-X-10-8-2-td1770.html
the only thing that was missed within the guide and I added it up is as follows:
$ cd $HOME/Documents/MATLAB/lp_solve_5.5/extra/MATLAB/lpsolve
$ sudo ln -s /opt/local/lib/liblpsolve55.dylib liblpsolve55.so
make sure that you have installed lp_solve package already.
I am trying to use mexopencv on my system which has:
Ubuntu 12.04.1 LTS
opencv 2.4.2
gcc-4.4
matlab 2012
and they all are working. I also used some c++ codes to test mex and it worked fine.
I used this to install mexopencv. Also did this because of some error I got which mentioned libstdc++.so.6
Now when I try something like:
a = cv.imread('pic.jpg');
I get:
Error using cv.imread
Invalid MEX-file '/home/primepc09/mexopencv/+cv/imread.mexa64': /usr/local/lib/libopencv_highgui.so.2.4:
undefined symbol: _ZNK9QCheckBox15minimumSizeHintEv
Any idea why I get this?
This is an unresolved symbol from QT library. Make sure you have QT installed on your system:
sudo dpkg -l | grep libqt
If you don't have it, you need to install it.
I am getting the following error when I trying to a run mex file in MATLAB:
??? Invalid MEX-file
'findimps3.mexa64':
/MATLAB/bin/glnxa64/../../sys/os/glnxa64/libgfortran.so.3: version `GFORTRAN_1.4' not found (required by /usr/lib/libblas.so.3gf)
Any ideas how to solve this problem?
update:
I found out that "strings MATLAB/.../libgfortran.so.3 | grep GFORTRAN" output GFORTRAN_1.0. I tried to changed libgfortran inside MATLAB but it didn't work. Not I think it's better to find a suitable libblas that works with GFORTRAN_1.0.
read this link, it explains how to configure matlab on some linux systems.
here the steps that are relevant to you:
To enable running external programs, […] fortran libraries need to be properly updated and linked. Look at the output of this command:
ll "$MATLABDIR/bin/glnxa64/"
It is likely that [this link] exist:
libgfortran.so.3 -> libgfortran.so.3.0.0
Search for [this library] on your machine:
locate libgfortran.so
[…] Update Matlab's links to point to these newer versions:
sudo ln -sf [location of libgfortran.so.3.0.0] "$MATLABDIR/bin/glnxa64/libgfortran.so.3"
I (think I) fixed this problem by running matlab with LD_PRELOAD, like this
LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libfreetype.so:/usr/lib/x86_64-linux-gnu/libgfortran.so.3 matlab
Notice freetype was another library I was having a similar problem with.
In my case the following command worked:
sudo ln -sf /usr/lib/gcc/i686-linux-gnu/4.7/libgfortran.so /usr/local/MATLAB/R2012a/sys/os/glnx86/libgfortran.so.3
Matlab was complaining it couldn't find the GFORTRAN1.4 in the following location:
/usr/lib/gcc/i686-linux-gnu/4.7/libgfortran.so
So I linked this location to the library I had :
/usr/local/MATLAB/R2012a/sys/os/glnx86/libgfortran.so.3
I found the location of this library by using the locate command as given above:) Thanks for the help:)
In my case, fixed by
$ ln -sf /usr/lib64/libgfortran.so.3.0.0 /opt/matlab/sys/os/glnxa64/libgfortran.so.3
Errors I meet when using CDSP:
csdp: /opt/matlab/sys/os/glnxa64/libgfortran.so.3: version GFORTRAN_1.4' not found (required by /usr/lib64/atlas/libptf77blas.so.3)
csdp: /opt/matlab/sys/os/glnxa64/libgfortran.so.3: versionGFORTRAN_1.4' not found (required by /usr/lib64/atlas/libf77blas.so.3)
I just ran into the same problem (error usr/lib64/libgfortran.so.3: version `gfortran_1.4' not found) and it was actually not hard to fix. The problem seems to be that gfortran_1.4 version of libgfortran.so.3 comes from the release gcc-4.6.2 (i.e. fortran 4.6).
What I did was downloaded gcc-4.6.2 and built, using the steps: tar -xvf gcc-4.6.2.tar.gz cd gcc-4.6.2 ./contrib/download_prerequisites cd .. mkdir objdir cd objdir $PWD/../gcc-4.6.2/configure --prefix=$HOME/gcc-4.6.2 --enable-languages=c,fortran,c++,go make make install
Then, once everything was made, I went to the directory where the new, fresh libgfortran.so.3 was sitting (in my case it was /home/testuser/objdir/x86_64-unknown-linux-gnu/32/libgfortran/.libs/)
I copied this version of libgfortran.so.3, and went to the directory where my program was expecting to find libgfortran.so.3. I replaced the old one (the old libgfortran.so.3) with the new one (the one we just copied).
The problem instantly went away. I hope this helps you too!