We have deployed Alfresco community V5.0.d in my company.
I have to automatically mount alfresco server at startup thanks to Webdav protocol.
To do that, i’ve written a .bat file and put in on ours active directory servers :
net use w: /delete /yes
net use w: \IP:8080\alfresco\webdav\Sites\test\documentLibrary/persistent:yes
I have to specify that we have 2 AD servers (without the same structure) and ours workstation are under Windows 7.
The issue is that when we type ID/Password Alfresco in the credentials prompt at startup, it doesn’t work (but it works if I access to alfreso webdav thanks to internet navigator).
I’m trying to solve this issue.
Webclient service automatically starts. I have set the AuthForwardServerList key in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters on workstation :
IP:8080/share
IP:8080/alfresco
IP:8080
IP
It doesn't solve the problem.
Do you know how to fix this ? Can you give me some help ?
Thanks
I blogged the details after a sucessful mounting in windows 7 & windows 2008 R2 server.
http://www.codingfreaks.net/2016/02/how-to-configure-alfresco-webdav-with.html
I thing, your mouting details are incorrect.
Incorrect : \IP:8080\alfresco\webdav\
Correct : \\localhost#8080\alfresco\webdav\
Please use the "#" symbol in between the ipaddress and the port number.
Related
I'm using a Talend job located on a server A , and I'm trying to runa PowerShell script with it.
my problem : the PS Script is located on remote server B.
I've managed to run the script from server A using the 'Tsystem' component but the PS Script is running on server A context.
I think the 'tsystem' component is getting the PS script from server B but runsit in server A.
Is there a way to runa powershell script on remote server using Talend ?
Any help will be appreciated.
Thanks in advance,
Antoine
of course - it is tSSH component
you must be sure - firewall is no block 22 port connection, and in case if (thought - yes) remote server is Windows, ssh service installed and enabled (it support native with Windows Server and many 3rd party servers available)
Typically I remote into a machine with IP Address 00.00.00.00 and then I have an account in a domain, let's call it myspecialaccount\firstname.lastname.
Then I use Windows auth to connect to SQL Server instance for example:
ABCLACSQLC123\DEV04A
So my question is HOW can I connect from my laptop through SSMS directly to the machine (pending ports are open etc..)
In order to use Windows Authentication, you'd have to add the credentials you use to login to the laptop as a "Login" to the SQL Server. That can only be done if
You login to your laptop with a domain user and
The user is in the same domain in which your SQL Server instance resides
Otherwise, you have no choice but to use SQL Server Authentication.
In this case, you login to your laptop with a user in "Corp" domain, but SQL Server instance is in "Services" domain. So it won't work. Unless I think both domains are part of the same Forest.
Look at this answer : https://stackoverflow.com/a/1615431/3317709. There is no trick to login, unless you get rid of the "Network related..." error. If you are getting this error, SSMS is not even able to find your server let alone logging into it. Once you get "Login failed..." error, from that point, we can tinker and try to get thru using your windows auth.
Try creating a shortcut to runas.exe, pointing to SSMS.
C:\Windows\System32\runas.exe /netonly /user:myspecialaccount\firstname.lastname "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe"
(The path to your SSMS exe may vary.)
When you double-click the shortcut, this will open up SSMS. You should then be able to connect to your instance (ABCLACSQLC123\DEV04A) as if it were on your local machine.
See here for more info on the runas command: https://technet.microsoft.com/en-us/library/cc771525.aspx
Install SQL Server Management Studio Express on your laptop. Microsoft has made the download link obscenely hard to find on their own site, but I did manage to find it here. Download the one for your system, probably x64.
Installation isn't much easier. Once everything is extracted, run the program, and switch to the installation tab, and choose "Standalone installation or add new features". Continue along the installation, and just install the management tools.
Once installed and running, use the Connect to Server dialog (it should open when you start the program, but if it doesn't, it's the first option under the File tab), and target wherever you want to connect (IP or server name should both work). If your laptop also authenticates to the same server that handles Windows authentication for your database, you can use Windows authentication, otherwise, you'll have to create a SQL Server account to use for login.
Usually I can find an answer to PowerShell questions by researching forums and adapting. However, after searching high and low, I cannot find an answer.
I am logged in as a domain administrator working on two enterprise servers in a test domain. $Server2003 is Windows 2003 server running PS v2. $Server2008 is Windows 2008 R2.
Problem: When I am working from $Server2003 I cannot use any commands to access or verify information on $Server2008. This error happens regardless of who the administrator is.
I have used PowerShell fairly extensively in our environments and haven't run into this error before. The error is not present when running commands from $Server2008 on $Server2003. In addition the error is not present when running commands from a production domain. I can also ping the 2003 or 2008 server regardless of which machine I am logged in as.
Examples:
From $Server2008: ping $Server2003 - returns pings
From $Server2003: ping $Server2008 - returns pings
From $Server2003: test-path \\$Server2008\D$\ - Get-ChildItem : Cannot find path '\\$Server2008\D$\' because it does not exist
From $Server2008: test-path \\$Server2003\D$\ - True
The commands I want to run are a lot more complex than test-path; however, if I cannot get the simple command to work I doubt I'll have much luck with a complex one.
The two servers have the same domain, are in the same forest, and have the same domain controllers.
Any ideas where to start?
EDIT: Wanted to add that I have tried using test path from Server2003 to a different 2008 server located in our dev environment (same domain) and it runs the test-path and commands successfully.
can you access the 2008 server remotely by other means? Like the Services MMC? Also, what if you create a share on 2008 rather than rely on the admin share?
The cannot find path error means that it doesn't exist or you don't have permissions. Does it work from a dos prompt?
UPDATE
I just noticed that you used single quotes, the variable will not expand. Enclose it in double wotes and try again
I am getting given error when I use powershell commandlets to connect azure app -
Get-HostedService : Could not establish secure channel for SSL/TLS with authority ‘management.core.windows.net’.
here is the links I follow -
http://msdn.microsoft.com/en-us/gg271300
http://wappowershell.codeplex.com/documentation
Based on my experience there could be two problems:
The certificate you are using is not able to create a secure SSL tunnel between your computer and Windows Azure Management Portal and you get error
I have seen OS specific problems related to SSPI and SCHANEL in which the SSL tunnel could not be created.
I also think the first links you have has old info and does not help in most cases. Lets try to solve problem first which is very easy. I am writing below understanding you have Powershell Cmdlets installed in your machine:
First download the publishconfig file from your Windows Azure portal as decribed here.
Now open your Windows Powershell for Windows Azure CmdLets (In Admin Mode)
After that enter these Powershell Commands directly:
PS > Import-Subscription <include your _filename_.publishsettings here>
PS > Select-Subscription <Enter The _name_of_your_subscription which will be listed after you run above command (Note - **SubscriptionName** is needed here>
PS > Get-HostedService <This should list all of services in your subscription>
Now you can manage the subscription from Powershell Cmdlets.
If you still have problems please let me know and I will provide info on 2).
Can you please file a bug for this here: http://github.com/WindowsAzure/azure-sdk-tools
The error message back from PowerShell should be friendlier in this case.
Also, you can now use Add-AzureAccount to obtain credentials rather than having to download and import a publishsettings file
I have installed Powershell V2 on 2 machines and run Enable-PsRemoting on both of them. Both machines are Win 2003 R2 and are joined to the same active directory domain and I can successfully run commands remotely. So PS remoting is working between the local server and remote server.
But when I try to access a share on a 3rd server (dir \someOtherServer\builds), which is also Win 2003 R2 and joined to the same active directory, I get the error:
Get-ChildItem : Cannot find path '\someOtherServer\builds' because it does not exist.
So what does it take to get this "hop" to work? Is it the delegation settings (in the active directory) to the remote machine? Are there any settings that can be done when creating a PSSession that will make the hop to work?
I addressed this issue for Workgroups in a blog post. I think the info should apply to domains but I haven't tested in a domain. Anyway, see if it helps. FYI, the solution involves Enable-WSManCredSSP and the Authentication parameter to Enter-PSSession.
It's can be many causes of that. If kerberos auth, check the time on all servers. It must be sync. It may be DNS resolution problem. Need more detailed problem description/
Sorry fo bad english :). If something wrong, please correct me :)