No such module JSQMessagesViewController - swift

I'm trying to import JSQMessagesViewController:
import JSQMessagesViewController
And it gives me the error 'no such module'. I've seen many people with this problem on the web but I can't find the solution. Here's my podfile:
# Uncomment this line to define a global platform for your project
platform :ios, ‘9.2’
# Uncomment this line if you're using Swift
use_frameworks!
target ‘IXODES’ do
pod 'JSQMessagesViewController'
pod 'Firebase'
pod 'Firebase/Core'
pod 'Firebase/Database'
pod 'Firebase/Auth'
pod 'Firebase/Messaging'
end
I've tried cleaning the build, also pod deintegrate and then pod install and pod update. Nothing works and I can see the library in my project like the rest. Any help?

perhaps you tried to import the file and the file is missing by any chance,
a few things you can do.
you can clean the project from cocoapods and re-install cocoapod(this helped me onetime i got the same problem the file were missing) you can do that by
run this code on the terminal
[sudo] gem install cocoapods-deintegrate
once done
cd your file
and then run thispod deintegrate
then you're all set! and re install it
---- another solution ---
try these
1-Adding all of the .frameworks to the Projects Build Phases -> Link Binary With Libraries
2-Selecting each framework and building it. You can do this by selecting your project name next to the run arrow.
3-Cleaning the project and restarting my computer.
hope it helps

Related

Trying to install GeoFire through Cocoapods, but getting Objective-C Module error

So there is an odd build issue I’m encountering.
I have an existing Xcode project where all my packages have been added through Xcode itself (I think Xcode basically uses Swift Package Manager underneath).
I came to a point where I needed to now use GeoFire . But Geofire needs to be installed through Cocoapods. But my Xcode project never used cocoapods.
So to integrate Cocoapods I did the following:
brew install cocoapods
opened terminal and navigated to root directory of iOS app (where <app-name>.xcodeproj exists)
pod init
opened the generated Podfile and added the following:
…
platform :ios, '11.0’
…
pod 'GeoFire', '~> 4.0’
…
pod install
opened <app-name>.xcworkspace
Then when I went to build the project, the following failure occurred (see image attached to question)
None of the workarounds suggested have helped me thus far. Any thoughts?
NOTE: I am doing all this on an M1 Macbook.
Wow, strange issue.
What ended up fixing it for me was to go to my pod file and replace:
pod 'GeoFire', '~> 4.0'
With:
pod 'GeoFire/Utils'
Now I can use GeoFire in my file as I wish.

xcode: no such module 'Kingfisher'

I want run my app on emulator
But I get this error:
no such module 'Kingfisher'
pod update, pod install, delete DerivedData folder, restart xcode, use xcworkspace, use xcodeproj and ... not solved my problem!
OS: 11.4
xcode: 12.4
My pod:
platform :ios, '11.0'
use_frameworks!
target 'Name' do
pod 'QuickBlox'
pod 'Quickblox-WebRTC'
pod 'Alamofire'
pod 'Kingfisher'
pod 'NVActivityIndicatorView/Extended'
pod 'PulsingHalo'
pod 'ImageScrollView'
pod 'Firebase/Core'
pod 'Firebase/Messaging'
end
please use these commands in order in the project directory
1- pod deintegrate
2- rm podfile.lock
3- pod install
then clean project and build it should work
It happens to me sometimes.
first, clean build and then rebuild the project.
if there is no success try pod install, otherwise restart your device.
In my case Kingfisher worked with iOS and not with macOS. I used Xcodes package installer and not pod install. In order to fix my "no such module 'Kingfisher'" error for macOS:
I had to go to my TARGETS. (on the left side of General/Signing/etc)
Click on your macOS target.
Click "Build Phases" (2nd to last on the top row)
Go down to 'Link Binary with libraries.'
Click the '+' button and add the Kingfisher library.
If you have the error in your iOS version then add the library to that target instead. This won't fix everyone's issue, but no other solution I could find online worked and finally after clicking around I found this library was missing and it fixed my error, so I hope it helps someone.
Adding this to podfile helps me
post_install do |installer|
installer.pods_project.build_configurations.each do |config|
config.build_settings["EXCLUDED_ARCHS[sdk=iphonesimulator*]"] = "arm64"
end
end

Unable to compile Podfile "Missing input and no rule to build"

I am currently unable to compile my podfile in Xcode10, and there doesn't seem to be much information online regarding how to fix this issue...
The current message I am getting is:
Showing All Messages
:-1: missing input '(File location)...Podfile.o' and no rule to build it
And this is my podfile:
source 'https://github.com/CocoaPods/Specs.git'
use_frameworks!
target 'App' do
project '/Users/Oskilla/Desktop/Swift/App/App.xcodeproj'
pod 'GoogleMaps'
pod 'GooglePlaces'
pod 'Google-Maps-iOS-Utils'
pod 'INSPhotoGallery'
end
Does anyone have any ideas on how to fix this issue?
Thanks a lot
You don't compile a Podfile. You use the CocoaPods gem to install and setup a CocoaPods integrated workspace:
Getting Started with CocoaPods
open terminal, cd /toPodFileDir/, then pod install
then open the xcworkspace file in your project folder and try to compile.
If you get errors after trying the above, let me know and I can edit.

When I compile the application I get an error equal to this: Could not build Objective-C module 'Firebase'

None of my 'Firebase' pods are found.
I updated to Xcode 9.
Ran 'pod update'
deitegrated my pods, and re-installed
Deleted 'Derived Data' folder contents
Build from 'Generic Devices'
Added the paths in the Header Search Path in the Build Settings $(inherited)
and
"$(SRCROOT)/Pods"
and
"${PODS_ROOT}/Firebase/Core/Sources"
Cleaned, build, closed the app, re-installed Xcode, restarted the system, and did it all again.
2 Swift Compiler Errors are always there.
'FirebaseAnalytics/FirebaseAnalytics.h' file not found
and
Could not build Objective-C module 'Firebase'
I'm on Sierra 10.12.6
None of these has worked so far to get rid of them. Does anyone know of any other possible solutions?
Here is the pod file info.
Uncomment the next line to define a global platform for your project
platform :ios, '10.0'
target 'MP' do
# Comment the next line if you're not using Swift and don't want to use dynamic frameworks
use_frameworks!
# Pods for MP
pod 'Firebase'
pod 'Firebase/Analytics'
pod 'Firebase/Core'
pod 'Firebase/Database'
pod 'Firebase/Auth'
pod 'Firebase/Storage'
end
------ UPDATE ------
as Hexfire suggested below. I removed pods and manually added the frameworks.
After some fiddling with the pathing for my MP.h file, that first error is gone, however now I am getting these compiler errors now...
:0: error: PCH file '/Users/.../Library/Developer/Xcode/DerivedData/MP-gwnwsbrisiyspxepcxkbrojwtfrs/Build/Intermediates.noindex/PrecompiledHeaders/MP-swift_ZJX6RAPYV1IT-clang_2SW1CJQDTFSBO.pch' not found: module file not found
clang importer creation failed
I built a .pch file 'MP.pch' and I pointed to it in the Build Settings Prefix Header with $(SRCROOT) with no luck. Do I have to put all of my Framework paths in there as well?
All of this seems related to the search paths. Does anyone have any other thoughts here? Perhaps an example of the build settings syntax? For example $(SRCROOT) with quotes or without? $(SRCROOT)/MP.pch or just $(SRCROOT)?
One of the good ways to make this work is by not using CocoaPods. You can grab all necessary Firebase libraries from here and use within your app (if link doesn't work, go here, and scroll down to "Integrate without CocoaPods").
After downloading:
Unzip and see the README file for which Frameworks to include in to your project.
Add the ObjC linker flag in your Other Linker Settings in your target's build settings.
This is a valid option and 100% workable.
P.S. If Firebase is the only pod you are using, you can quickly and safely clean your project from any CocoaPods trails by using pod deintegrate command.
Good luck!
If All Of this do not work Try this for once
run sudo gem install cocoapods
You can check your version by typing pod --version anywhere on your terminal.
Make sure you are using latest Version of it

cocoapods Google Mobile ads does not generate .xcworkspace file

I am exporting a project from Unity3d to xcode that uses the last GoogleMobileAds package.
I have installed and updated cocoapods and also have the famous podfile containing de following lines:
source 'https://github.com/CocoaPods/Specs.git'
install! 'cocoapods', :integrate_targets => false
platform :ios, ‘8.0’
target ‘MyProject’ do
pod 'Google-Mobile-Ads-SDK', '~> 7.14’
pod 'Firebase/Core'
pod 'Firebase/AdMob'
end
and I run
pod install
and
pod update
successfully
dependancies are downloaded alright, as you can see the results below:
Updating local specs repositories
CocoaPods 1.2.0.beta.1 is available.
To update use: `sudo gem install cocoapods --pre`
[!] This is a test version we'd love you to try.
For more information, see https://blog.cocoapods.org and the CHANGELOG for this version at https://github.com/CocoaPods/CocoaPods/releases/tag/1.2.0.beta.1
Analyzing dependencies
Downloading dependencies
Using Firebase (3.9.0)
Using FirebaseAnalytics (3.5.1)
Using FirebaseCore (3.4.4)
Using FirebaseInstanceID (1.0.8)
Installing Google-Mobile-Ads-SDK (7.14.0)
Using GoogleInterchangeUtilities (1.2.2)
Using GoogleSymbolUtilities (1.1.2)
Using GoogleToolboxForMac (2.1.0)
Generating Pods project
Skipping User Project Integration
Sending stats
Pod installation complete! There are 3 dependencies from the Podfile and 8 total pods installed.
According to both cocoapods and google mobile ads documentation, I will need to continue with "MyProject.xcworkspace" but the file is nowhere to be found.
any suggestions?
When using install! 'cocoapods', :integrate_targets => false Cocoapods will not create an xcworkspace for you.
That's the intended behaviour. You'll even notice this if you follow the command prompt. This line is telling you that no integration is taking place.
Skipping User Project Integration
If you want to get an xcworkspace just remove :integrate_targets => false
It seems the problem comes from editing the Podfile using TextEdit.
As it warns you that you should not continue using TextEdit, one could falsely suppose that the program is intelligent enough to understand and correct these unwanted modifications.
This is the solution I have found:
delete the Podfile and Podfile.lock from your working directory
create a new Podfile using pod init
install SublimeText and use it to open the Podfile
add the necessary pods for the project
(I also included the line "use_frameworks!" although it may not be
needed.)
run "pod install" and "pod update"; this time I get
[!] Please close any current Xcode sessions and use Orbit.xcworkspace for this project from now on.
and the file is now available in project directory
You was used this guide for install pod?
In addition to Radu Dita's message. If you do not want that line to be added (so you do not need to delete it later), you need to disable cocoapods integration in "iOS Resolver Settings" by selecting "None", build project and then enable it back "Xcode Workspace". I found this with try and error. I hope my message will save save someone's time