I'm running script A which feeds ARGV containing the path to a file to perl script B. This is done by a
local #ARGV = ($file, $file2, etc.);
do scriptB.pl or die "scriptB has failed";
Script B then tries to open the file:
open( my $fh_file, "<", $file )
or die "Could not open file '$file' $!";
However, if the file is missing I do not get the message quoted after "or die" in B. Instead I get the do scriptB.pl or die message in A. If I remove the "or die" from A, the script continues after B silently dies as if nothing went wrong.
I was wondering if there was any way to get B to print its die message?
Better yet, what is the best way to have B run a block of code after it fails to open the file? Said code would for example write to a separate file listing which files were missing so that the user may easily track down such errors.
#something like
open( my $fh_file, "<", $file) or {
print "the file could not be found";
die;
}
The only thing I've found searching the net for help was someone mentioning a "or do {}", but this is giving me strange syntax errors so I am not sure if I'm using it right.
If you want to continue to use the open(...) or ... syntax, then you could use do.
open my $fh, '<', $file or do {
...
};
But I think it's probably clearer to switch to if
if (! open my $fh, '<', $file) {
...
}
Or even unless
unless (open my $fh '<', $file) {
...
}
I think you'll get clearer code with fewer gotchas if you put script B into a module, and load it with use or require and call the function(s) in there directly with clear parameters.
What you're missing here is that do involves an eval behind the scenes, and that results in the exception confusion. You can more or less avoid that confusion by moving your script B code into a function in a module, and calling it.
(Also, perl 5.26 will have a slight hiccup with do wherein the current directory will be removed from the directory lookup, due to security concerns. use and require have the same hiccup, but this may be less surprising since you should put your module into a path you explicitly get into the #INC load path.)
die doesn't print a message; die throws an exception. When you catch that exception you don't do anything with the message passed to die. Replace
local #ARGV = ($file, $file2, etc.);
do scriptB.pl or die "scriptB has failed";
with
local #ARGV = ($file, $file2, etc.);
do scriptB.pl or die "scriptB has failed: ". ( $# || $! );
Related
I am completely new to this and this should be the easiest thing to do but for some reason I cannot get my local text file to print. After trying multiple times with different code I came to use the following code but it doesn't print.
I have searched for days on various threads to solve this and have had no luck. Please help. Here is my code:
#!/usr/bin/perl
$newfile = "file.txt";
open (FH, $newfile);
while ($file = <FH>) {
print $file;
}
I updated my code to the following:
#!/user/bin/perl
use strict; # Always use strict
use warnings; # Always use warnings.
open(my $fh, "<", "file.txt") or die "unable to open file.txt: $!";
# Above we open file using 3 handle method
# or die die with error if unable to open it.
while (<$fh>) { # While in the file.
print $_; # Print each line
}
close $fh; # Close the file
system('C:\Users\RSS\file.txt');
It returns the following: my first report generated by perl. I do not know where this is coming from. Nowhere do I have a print "my first report generated by perl."; statement and it definitely is not in my text file.
My text file is full of various emails, addresses, phone numbers and snippets of emails.
Thank you all for your help. I figured out my problem. I somehow managed to kick myself out of my directory and did not realize it.
This is most likely a combination of a failure to open the file, and a failure to check the return value of open.
If you are completely new to perl, I warmly recommend reading the excellent "perlintro" man page, using either man perlintro or perldoc perlintro on the command line, or taking a look here: https://perldoc.perl.org/perlintro.html.
The "Files and I/O" section there gives a good and concise way of doing this:
open(my $in, "<", "input.txt") or die "Can't open input.txt: $!";
while (<$in>) { # assigns each line in turn to $_
print "Just read in this line: $_";
}
This version will give you an explanation and abort if anything goes wrong while trying to open the file. For example, if there is no file named file.txt in the current working directory, your version will quietly fail to open the file, and afterwards it will quietly fail to read from the closed file handle.
Also, always adding at least one of these to your perl scripts will save you a lot of trouble in the long run:
use warnings; # or use the -w command line switch to turn warnings on globally
use diagnostics;
These won't catch the failure to open the file, but will alert on the failed read.
In the first example here you can see that without the diagnostics module, the code fails without any error messages. The second example shows how the diagnostics module changes this.
$ perl -le 'open FH, "nonexistent.txt"; while(<FH>){print "foo"}'
$ perl -le 'use diagnostics; open FH, "nonexistent.txt"; while(<FH>){print "foo"}'
readline() on closed filehandle FH at -e line 1 (#1)
(W closed) The filehandle you're reading from got itself closed sometime
before now. Check your control flow.
By the way, the legendary "Camel Book" is basically the perl man pages formatted for paper printing, so reading the perldocs in the order listed in perldoc perl will give you a high level of understanding of the language in a reasonably accessible and inexpensive manner.
Happy hacking!
This is simple and including explanations.
use strict; # Always use strict
use warnings; # Always use warnings.
open(my $fh, "<", "file.txt") or die "unable to open file.txt: $!";
# Above we open file using 3 handle method
# or die die with error if unable to open it.
while (<$fh>) { # While in the file.
print $_; # Print each line
}
close $fh; # Close the file
There is then also the case where you are trying to open a file which is not in a location where you think it is. So consider doing full path, if not in the same dir.
open(my $fh, "<", 'F:\Workdir\file.txt') or die "unable to open < input.txt: $!";
EDIT: After your comments, it seems that you are opening an empty file. Please add this at the bottom of that same script and rerun. It will open the file in C:\Users\RSS and make sure it does actually contain data?
system('C:\Users\RSS\file.txt');
First, of all as you are starting out, it is better to enable all warnings by 'use warnings' and disable all such expression which can lead to uncertain behavior or are difficult to debug by pragma 'use strict'.
As you are dealing with file stream, it is always recommended to the check if you were able to open the stream. so, try to use croak or die both would terminate the program with a given message.
Instead of reading inside the while condition, I would recommend checking for end of file. So, loop breaks as end is found. Usually, when reading a line you would use it for further processing, so it is good idea to remove end of lines using chomp.
A sample for reading a file in perl can be as follows:
#!/user/bin/perl
use strict;
use warnings;
my $newfile = "file.txt";
open (my $fh, $newfile) or die "Could not open file '$newfile' $!";
while (!eof($fh))
{
my $line=<$fh>;
chomp($line);
print $line , "\n";
}
Most of time, I do something like this:
open FH, ">file.txt" or die "Cann't open file: $!";
Does die have to be used? If I want my script to continue (and simply ignore the error if the file cannot be opened), what should I do?
You might want to do something like
if(open my $fh, ">", "file.txt") {
# do stuff with file
close $fh;
}
else {
# do stuff without file
}
The code doesn't have to die if it cannot access the file.
If writing to the file is optional, you might do something like this:
my $file_is_ok = 0;
open FH, ">file.txt" and $file_is_ok = 1;
warn "No logging available" unless $file_is_ok;
Then wherever you want to use the file handle, you can check first that it is ok:
$file_is_ok and print FH "Something happened";
Usually you'll want a little more abstraction than the above, but I hope that is enough to get started.
No, die most definitely doesn't have to be used, or else a failed open would simply exit the program. This is just a commonly used construct since often if you can't open a file there's no point in continuing, but there really is no requirement to die or to do anything else either.
open(my $fh, ">", $file) or print "open failed , you are on your own\n";
I might do something like:
sub process_file {
my $file = shift;
open(my $fh, ">", $file) or return;
# write to file ...
}
It is recommended that you use croak() from Carp instead, especially in modules or objects. See http://perldoc.perl.org/Carp.html
Carp is a standard module and, like all standard modules, comes installed with Perl. A list of all the standard modulesis available in perlmodlib. See http://perldoc.perl.org/perlmodlib.html
Sorry for responding to a few months old question, but the way I do this is by implementing my own die style subroutine:
sub fail {
my $text = $_[0];
# Do error-related stuff here, like send an email
die($text) # or just exit
}
open(my $fh, ">file.txt") or fail("Unable to open file: $!");
You could use a try catch block, using Try::Tiny or something of the sort.
If what you are trying to do is avoid exiting the program when you encounter an error opening a file, omitting the die is not the correct approach. die is Perl's exception mechanism; the fact that it aborts the program by default is an accidental, not fundamental, property. If you supply an exception handler, you retain control. The correct approach is to catch the exception and do your cleanup in the finally block.
use 5.10.0;
use Try::Tiny;
my ($infile, $FH);
try {
open $infile, '<', 'infile.txt' or die "Can't open infile";
try {
open $FH, '>', 'file.txt' or die "Can't open outfile";
my $line = <$infile>;
print $FH $line;
say 'Cleaning up $FH';
close $FH;
} finally {
say 'Cleaning up $infile';
close $infile;
} catch {
die $_;
};
} catch {
die $_;
};
So if open $infile ... fails, die to the catch block, which redies and aborts the script. But once we've opened $infile, if open $FH fails, die to a catch block that also aborts the program but forces close $infile to happen first. File handles aren't the best examples of resources to clean up before program exit because the interpreter closes files automatically, but the basic idea is there.
If you don't like the nested try blocks, you can achieve a very similar effect by checking which exception caused the block to abort and deciding what cleanup is necessary based on that. That's a little more fragile, but still more robust than anything mentioning goto.
The below is the Perl script that I wrote today. This reads the content from one file and writes on the other file. It works but, not completely.
#---------------------------------------------------------------------------
#!/usr/bin/perl
open IFILE, "text3.txt" or die "File not found";
open OFILE, ">text4.txt" or die "File not found";
my $lineno = 0;
while(<IFILE>)
{
#var=<IFILE>;
$lineno++;
print OFILE "#var";
}
close(<IFILE>);
close(<OFILE>);
#---------------------------------------------------------------------------
The issue is, it reads and writes contens, but not all.
text3.txt has four lines. The above script reads only from second line and writes on text4.txt. So, finally I get only three lines (line.no 2 to line.no 4) of text3.txt.
What is wrong with the above program. I don't have any idea about how to check the execution flow on Perl scripts. Kindly help me.
I'm completely new to Programming. I believe, learning all these would help me in changing my career path.
Thanks in Advance,
Vijay
<IFILE> reads one line from IFILE (only one because it's in scalar context). So while(<IFILE>) reads the first line, then the <IFILE> in list context within the while block reads the rest. What you want to do is:
# To read each line one by one:
while(!eof(IFILE)) { # check if end of file is reached instead of reading a line
my $line = <IFILE>; # scalar context, reads only one line
print OFILE $line;
}
# Or to read the whole file at once:
my #content = <IFILE>; # list context, read whole file
print OFILE #content;
The problem is that this line...
while(<IFILE>)
...reads one line from text3.txt, and then this line...
#var=<IFILE>;
...reads ALL of the remaining lines from text3.txt.
You can do it either way, by looping with while or all at once with #var=<IFILE>, but trying to do both won't work.
This is how I would have written the code in your question.
#!/usr/bin/perl
use warnings;
use strict;
use autodie;
# don't need to use "or die ..." when using the autodie module
open my $input, '<', 'text3.txt';
open my $output, '>', 'text4.txt';
while(<$input>){
my $lineno = $.;
print {$output} $_;
}
# both files get closed automatically when they go out of scope
# so no need to close them explicitly
I would recommend always putting use strict and use warnings at the beginning of all Perl files. At least until you know exactly why it is recommended.
I used autodie so that I didn't have to check the return value of open manually. ( autodie was added to Core in version 5.10.1 )
I used the three argument form of open because it is more robust.
It is important to note that while (<$input>){ ... } gets transformed into while (defined($_ = <$input>)){ ... } by the compiler. Which means that the current line is in the $_ variable.
I also used the special $. variable to get the current line number, rather than trying to keep track of the number myself.
There is a couple of questions you might want to think about, if you are strictly copying a file you could use File::Copy module.
If you are going to process the input before writing it out, you might also consider whether you want to keep both files open at the same time or instead read the whole content of the first file (into memory) first, and then write it to the outfile.
This depends on what you are doing underneath. Also if you have a huge binary file, each line in the while-loop might end up huge, so if memory is indeed an issue you might want to use more low-level stream-based reading, more info on I/O: http://oreilly.com/catalog/cookbook/chapter/ch08.html
My suggestion would be to use the cleaner PBP suggested way:
#!/usr/bin/perl
use strict;
use warnings;
use English qw(-no_match_vars);
my $in_file = 'text3.txt';
my $out_file = 'text4.txt';
open my $in_fh, '<', $in_file or die "Unable to open '$in_file': $OS_ERROR";
open my $out_fh, '>', $out_file or die "Unable to open '$out_file': $OS_ERROR";
while (<$in_fh>) {
# $_ is automatically populated with the current line
print { $out_fh } $_ or die "Unable to write to '$out_file': $OS_ERROR";
}
close $in_fh or die "Unable to close '$in_file': $OS_ERROR";
close $out_fh or die "Unable to close '$out_file': $OS_ERROR";
OR just print out the whole in-file directly:
#!/usr/bin/perl
use strict;
use warnings;
use English qw(-no_match_vars);
my $in_file = 'text3.txt';
my $out_file = 'text4.txt';
open my $in_fh, '<', $in_file or die "Unable to open '$in_file': $OS_ERROR";
open my $out_fh, '>', $out_file or die "Unable to open '$out_file': $OS_ERROR";
local $INPUT_RECORD_SEPARATOR; # Slurp mode, read in all content at once, see: perldoc perlvar
print { $out_fh } <$in_fh> or die "Unable to write to '$out_file': $OS_ERROR";;
close $in_fh or die "Unable to close '$in_file': $OS_ERROR";
close $out_fh or die "Unable to close '$out_file': $OS_ERROR";
In addition if you just want to apply a regular expression or similar to a file quickly, you can look into the -i switch of the perl command: perldoc perlrun
perl -p -i.bak -e 's/foo/bar/g' text3.txt; # replace all foo with bar in text3.txt and save original in text3.txt.bak
When you're closing the files, use just
close(IFILE);
close(OFILE);
When you surround a file handle with angle brackets like <IFILE>, Perl interprets that to mean "read a line of text from the file inside the angle brackets". Instead of reading from the file, you want to close the actual file itself here.
I want to do some task when the file is not opened in the Perl program below. But when I run it, I am getting syntax errors. What's wrong with it?
my $LOGPATH = $ENV{DATA_OU};
my $LOGFILE = "cdj_rep" . "." . "test" . ".rpt";
if ! (open(OUT,">$LOGPATH/test1/work/$LOGFILE")) {
print "testin";
return;
}
close(OUT);
I'd write it as
my $LOGPATH = $ENV{DATA_OU};
my $LOGFILE = "cdj_rep.test.rpt";
my $path = "$LOGPATH/test1/work/$LOGFILE";
open my $fh, ">", $path or do {
warn "$0: open $path: $!";
return;
};
close $fh or warn "$0: close $path: $!";
Place the entire path in $path so you don't have to repeat it multiple times, and if you ever need to change it, you can do so in one place.
The call to open uses a lexical filehandle (my $fh) rather than a bareword handle. This is a good habit to develop because passing $fh to subs or stuffing it inside data structures tends to be more natural syntactically.
It also uses the 3-argument form of open so you don't have to worry about characters in the path being interpreted specially. It may not seem like a big deal in the context of your code, but it's another good habit to develop.
A common idiom for checking whether an open succeeds is
open my $fh, "<", $path
or die "$0: open $path: $!";
Using if (!open ... or unless (open ... would be fine, but with a lexical filehandle, you need to worry about scoping issues. You seem to be using the check as a guard, so writing open or ... leaves the filehandle in scope for when it does succeed. You want two statements to execute if it fails, so you need to wrap them in do { ... } as above.
Also note the content of the error message passed to warn:
the program that had an error ($0)
what it was trying to do (open $path)
and why it failed ($!)
The warn and die operators send their output to the standard error, which allows the flexibility of redirecting error messages elsewhere.
Finally, when you close a handle on a file you created to write or append, you should check whether it fails, which might happen if an I/O error occurred, for example.
The ! needs to go inside the brackets:
if (! open (out,
I am getting this error while executing my Perl script. Please, tell me how to rectify this error in Perl.
print() on closed filehandle MYFILE
This is the code that is giving the error:
sub return_error
{
$DATA= "Sorry this page is corrently being updated...<p>";
$DATA.= " Back ";
open(MYFILE,">/home/abc/xrt/sdf/news/top.html");
print MYFILE $DATA;
close(MYFILE);
exit;
}
I hope that now I'm clearer.
You want to do some action on MYFILE after you (or the interpreter itself because of an error) closed it.
According to your code sample, the problem could be that open doesn't really open the file, the script may have no permission to write to the file.
Change your code to the following to see if there was an error:
open(MYFILE, ">", "/home/abc/xrt/sdf/news/top.html") or die "Couldn't open: $!";
Update
ysth pointed out that -w is not really good at checking if you can write to the file, it only ‘checks that one of the relevant flags in the mode is set’. Furthermore, brian d foy told me that the conditional I've used isn't good at handling the error. So I removed the misleading code. Use the code above instead.
It appears that the open call is failing. You should always check the status when opening a filehandle.
my $file = '/home/abc/xrt/sdf/news/top.html';
open(MYFILE, ">$file") or die "Can't write to file '$file' [$!]\n";
print MYFILE $DATA;
close MYFILE;
If the open is unsuccessful, the built-in variable $! (a.k.a. $OS_ERROR) will contain the OS-depededant error message, e.g. "Permission denied"
It's also preferable (for non-archaic versions of Perl) to use the three-argument form of open and lexical filehandles:
my $file = '/home/abc/xrt/sdf/news/top.html';
open(my $fh, '>', $file) or die "Can't write to file '$file' [$!]\n";
print {$fh} $DATA;
close $fh;
An alternate solution to saying or die is to use the autodie pragma:
#!/usr/bin/perl
use strict;
use warnings;
use autodie;
open my $fh, "<", "nsdfkjwefnbwef";
print "should never get here (unless you named files weirdly)\n";
The code above produces the following error (unless a file named nsdfkjwefnbwef exists in the current directory):
Can't open 'nsdfkjwefnbwef' for reading: 'No such file or directory' at example.pl line 7
This:
open(MYFILE,">/home/abc/xrt/sdf/news/top.html");
In modern Perl, it could be written as:
open(my $file_fh, ">", "/home/abc/xrt/sdf/news/top.html") or die($!);
This way you get a $variable restricted to the scope, there is no "funky business" if you have weird filenames (e.g. starting with ">") and error handling (you can replace die with warn or with error handling code).
Once you close $file_fh or simply go out of scope, you can not longer print to it.
I had this problem when my files were set to READ-ONLY.
Check this also, before giving up! :)
Check that the open worked
if(open(my $FH, ">", "filename") || die("error: $!"))
{
print $FH "stuff";
close($FH);
}
If you use a global symbol MYFILE as your filehandle, rather than a local lexical ($myfile), you will invariably run into issues if your program is multithreaded, e.g. if it is running via mod_perl. One process could be closing the filehandle while another process is attempting to write to it. Using $myfile will avoid this issue as each instance will have its own local copy, but you will still run into issues where one process could overwrite the data that another is writing. Use flock() to lock the file while writing to it.
Somewhere in you're script you will be doing something like:
open MYFILE, "> myfile.txt";
# do stuff with myfile
close MYFILE;
print MYFILE "Some more stuff I want to write to myfile";
The last line will throw an error because MYFILE has been closed.
Update
After seeing your code, it looks like the file you are trying to write to can't be opened in the first place. As others have already mentioned try doing something like:
open MYFILE, "> myfile.txt" or die "Can't open myfile.txt: $!\n"
Which should give you some feedback on why you can't open the file.