I'm trying to add use-package to my init.el and I'm running into this error:
Error (use-package): evil-leader/:config: Invalid function: (global-evil-leader-mode)
Here's a stripped down init.el that produces that error (assumes evil and evil-leader are already installed)
(package-initialize)
(require 'use-package)
(use-package evil :ensure)
(use-package evil-leader
:ensure
:after evil
:config
((global-evil-leader-mode)
(evil-leader/set-leader ",")
(evil-leader/set-key
"b" 'buffer-menu)
; Apparently this needs to go after (global-evil-leader-mode)
; https://emacs.stackexchange.com/questions/30332/evil-leader-stops-working-when-i-eval-buffer
(evil-mode t)))
This is how it was set up without use-package working correctly:
(package-initialize)
(require 'evil)
(require 'evil-leader)
(global-evil-leader-mode)
(evil-leader/set-leader ",")
(evil-leader/set-key
"b" 'buffer-menu)
; Apparently this needs to go after (global-evil-leader-mode)
; https://emacs.stackexchange.com/questions/30332/evil-leader-stops-working-when-i-eval-buffer
(evil-mode t)
Any help identifying what I'm doing wrong would be appreciated, thank you!
I thin you should remove the parenthesis after :config
Using the following use-package syntax, Org-journal doesn't recognize the org-journal-dir setting--instead, attempts to create a different directory with query Journal directory ~/Documents/journal not found. Create one?:
(use-package org-journal
:ensure t
:custom
(setq org-journal-dir "~/Dropbox/logs/journal/")
(setq org-journal-file-format "%m.%d.%Y.org"))
I see no error messages--it just seems to ignore the directory setting. Is this a simple syntax error? I'm new to the package and to Org mode.
[Update]: Sometimes, I get the following error message on Emacs start:
Error (use-package): org-journal/:catch: Symbol’s value as variable is void: org-journal-dir
The syntax for :custom is wrong. See https://github.com/jwiegley/use-package#customizing-variables. It should be something like:
:custom
(org-journal-dir "~/Dropbox/logs/journal/")
(org-journal-file-format "%m.%d.%Y.org")
Either that, or use :config (or maybe :init, but probably not) with setq:
:config
(setq org-journal-dir "~/Dropbox/logs/journal/")
(setq org-journal-file-format "%m.%d.%Y.org")
I'm new to emacs (coming from vim, where I can't get idris-vim to work) and have these packages installed via el-get:
ace-jump-mode installed A quick cursor location minor mode for emacs.
el-get installed Manage the external elisp bits and pieces you depend upon.
evil-leader installed Add <leader> shortcuts to Evil, the extensible vim emulation layer
evil-numbers installed Increment/decrement numbers in Evil, the extensible vim emulation layer. Like C-a/C-x in vim. After installation, you will need to add a key-binding for evil-numbers. For example: (define-key evil-normal-state-map (kbd "C-c +") 'evil-numbers/inc-at-pt) (define-key evil-normal-state-map (kbd "C-c -") 'evil-numbers/dec-at-pt)
evil-surround installed Emulate Tim Pope's surround.vim in evil, the extensible vim emulation layer for emacs
evil installed Evil is an extensible vi layer for Emacs. It emulates the main features of Vim, and provides facilities for writing custom extensions.
goto-chg installed Goto the point of the most recent edit in the buffer.
haskell-mode installed A Haskell editing mode
idris-mode installed Major mode for the Idris language
j-mode installed Emacs major mode for editing J code.
linum-relative installed Display relative line number in the left margin
undo-tree installed Treat undo history as a tree
My ~/.emacs.d/init.el looks like this:
(add-to-list 'load-path "~/.emacs.d/")
(require 'auto-complete-config)
(add-to-list 'ac-dictionary-directories "~/.emacs.d//ac-dict")
(ac-config-default)
(setq mouse-wheel-scroll-amount '(1 ((shift) . 1)))
(setq mouse-wheel-progressive-speed nil)
(setq mouse-wheel-f 't)
(setq scroll-s 1)
(add-to-list 'load-path "~/.emacs.d/lojban")
(autoload 'lojban-parse-region "lojban" nil t)
(autoload 'lojban-mode "lojban-mode" nil t)
(add-to-list 'load-path "~/.emacs.d/el-get/el-get")
(unless (require 'el-get nil 'noerror)
(with-current-buffer
(url-retrieve-synchronously
"https://raw.github.com/dimitri/el-get/master/el-get-install.el")
(goto-char (point-max))
(eval-print-last-sexp)))
(add-to-list 'el-get-recipe-path "~/.emacs.d/el-get-user/recipes")
(el-get 'sync)
(add-to-list 'load-path "~/.emacs.d/j-mode/")
(autoload 'j-mode "j-mode.el" "Major mode for editing J files" t)
(add-to-list 'auto-mode-alist '("\\.ij[rstp]$" . j-mode))
;(custom-set-face
; '(j-verb-face ((t (:foreground "cornflower blue"))))
; '(j-adverb-face ((t (:foreground "goldenrod"))))
; '(j-conjunction-face ((t (:foreground "olive drab"))))
; '(j-other-face ((t (:foreground "Black")))))
(require 'evil-leader)
(global-evil-leader-mode)
(add-to-list 'load-path "~/.emacs.d/evil")
(require 'evil)
(evil-mode 1)
;(require 'lalopmak-evil)
(define-key evil-normal-state-map "," 'evil-ex)
(define-key evil-motion-state-map ":" 'evil-repeat-find-char-reverse)
(define-key evil-window-map "j" 'evil-window-left)
(define-key evil-window-map "J" 'evil-window-move-far-left)
(define-key evil-window-map "k" 'evil-window-down)
(define-key evil-window-map "K" 'evil-window-move-very-bottom)
(define-key evil-window-map "h" 'evil-window-up)
(define-key evil-window-map "H" 'evil-window-move-very-top)
(define-key evil-motion-state-map "j" 'evil-backward-char)
(define-key evil-motion-state-map "J" 'evil-window-top)
(define-key evil-motion-state-map "k" 'evil-next-line)
(define-key evil-motion-state-map "h" 'evil-previous-line)
(define-key evil-motion-state-map (kbd "C-n") 'evil-scroll-line-up)
(define-key evil-normal-state-map (kbd "M-x") 'execute-extended-command)
Since I'm using evil, and idris-mode has bindings that work with evil, I tried to follow the case splitting example for vim. Starting from a fresh session, here's what happens:
I open the vadd.idr file, which already contains 3 lines (1 of which is blank).
I move to the last line and press \d.
I get a long error message, which disappears before I can read it.
The Idris REPL opens in a new split pane.
The command line (at the bottom of the window) shows Buffer vadd.idr has no process.
I also try out the REPL, typing in insert mode. Upon pressing enter, I get Buffer *idris-repl* has no process, and nothing further happens.
In a Linux shell, echo $PATH produces /home/james/bin /home/james/.cabal/bin /home/james/bin /usr/local/sbin /usr/local/bin /usr/bin /usr/bin/vendor_perl /usr/bin/core_perl, and idris works from the shell as expected.
When exiting emacs (via a few ZZs), I'm told that active processes exist. Here's the process list I'm shown:
Process Status Buffer TTY Command
idris run *idris-process* /dev/pts/3 idris --ideslave-socket
Because it may be connected, here's the error I get from the same file in vim, using idris-vim:
:call IdrisReload(0)
"vadd.idr" 3L, 62C written
Uncaught error: connect: does not exist (Connection refused)
Press ENTER or type command to continue
I use the ex command because the leader binding doesn't work (yet another issue I have).
Sorry for making such a long question. I wanted to include most relevant pieces of information, even if that meant adding irrelevant things.
Edit: more; I found the debugger (setting “Enter Debugger on Error” from the menu).
I press \d, then see this in a buffer:
Debugger entered--Lisp error: (file-error "make client process failed" "connection refused" :name "Idris Ideslave" :buffer "*idris-connection*" :host "127.0.0.1" :service 0 :nowait nil)
make-network-process(:name "Idris Ideslave" :buffer "*idris-connection*" :host "127.0.0.1" :service 0 :nowait nil)
open-network-stream("Idris Ideslave" "*idris-connection*" "127.0.0.1" 0)
idris-connect(0)
idris-process-filter(" ____ __ _ \n / _/___/ /____(_)____ \n / // __ / ___/ / ___/ Version 0.9.12\n _/ // /_/ / / / (__ ) http://www.idris-lang.org/ \n /___/\\__,_/_/ /_/____/ Type :? for help \n\n")
comint-output-filter(#<process idris> " ____ __ _ \n / _/___/ /____(_)____ \n / // __ / ___/ / ___/ Version 0.9.12\n _/ // /_/ / / / (__ ) http://www.idris-lang.org/ \n /___/\\__,_/_/ /_/____/ Type :? for help \n\n")
accept-process-output(#<process idris> 3)
idris-run()
idris-ensure-process-and-repl-buffer()
idris-load-file-sync()
idris-add-clause(nil)
call-interactively(idris-add-clause nil nil
and in the ex command line see
make client process failed: connection refused, :name, Idris Ideslave, :buffer, *idris-connection*, :host, 127.0.0.1, :service, 0, :nowait, nil
I have no idea what it's trying to do.
Edit: Here's the right-hand end of vadd.idr's buffer's status line (correct term?):
(Idris (Not loaded) ElDoc Ind Undo-Tree)
Not loaded looks worrying, but I don't know any more about it.
Edit: Going back to the Vim issue, I ran
$ vim -V9vimlog vadd.idr
:call IdrisReload(0)
ZZ
$ ack idris vimlog
Everything from the log looks pretty normal, until the end (brought about by the error):
Calling shell to execute: "(idris --check vadd.idr) &> /tmp/vbKELys/1"
Error detected while processing function <SNR>38_BufWritePostHook..<SNR>38_UpdateErrors..<SNR>38_CacheErrors..16..15..SyntaxCheckers_idris_idris_GetLocList..SyntasticMake:
Calling shell to execute: "(idris --client ':l /mnt/sda9/home/james/Documents/idris/vadd.idr') >/tmp/vbKELys/2 2>&1"
So, I find that the log file includes
Calling shell to execute: "(idris --check vadd.idr) &> /tmp/vbKELys/1"
Error detected while processing function <SNR>38_BufWritePostHook..<SNR>38_UpdateErrors..<SNR>38_CacheErrors..16..15..SyntaxCheckers_idris_idris_GetLocList..SyntasticMake:
line 66:
E380: At bottom of quickfix stack
error list 1 of 1; 1 errors
Calling shell to execute: "(idris --client ':l /mnt/sda9/home/james/Documents/idris/vadd.idr') >/tmp/vbKELys/2 2>&1"
Uncaught error: connect: does not exist (Connection refused)
Running those shell commands from the shell, I get:
$ idris --check vadd.idr
$ idris --client ':l /mnt/sda9/home/james/Documents/idris/vadd.idr'
Uncaught error: connect: does not exist (Connection refused)
$ idris --client vadd.idr
Uncaught error: connect: does not exist (Connection refused)
Plain idris vaddr.idr works fine, by the way.
It looks to me like you may have a version mismatch between Idris and idris-mode. Somewhat recently, idris-mode started using a socket to communicate with the compiler rather than stdin/stdout. If you're using idris-mode from MELPA, that's what it will be expecting. Generally, the version on MELPA will require the latest Git version of the compiler. The latest tagged release from Github (available in MELPA-stable) will work with the latest release of Idris.
In Vim, it's much more difficult to run a subprocess than it is in Emacs, so in Vim, you need to have a separate running Idris REPL. Commands are then sent using the --client option, which causes the command to be run in the background REPL. This background REPL should have the correct working directory. I saw that you used --check above - this tells Idris to type check a file and then exit. Try starting a REPL up in one terminal, then using --client from another.
I am violating probably the most essential emacs package rule in my .emacs file by loading a specific path to an emacs (workgroups2) package which gets updated. So, everytime a new version is released and when I upgrade I have to edit my emacs file (this is the first line below).
The following is the relevant section of my emacs file. How can I load this without adding a specific path? Let me know what other suggestions you have and thanks!
To be clear the line we are considering is: (add-to-list 'load-path "~/.emacs.d/elpa/workgroups2-20130915.1509")
(add-to-list 'load-path "~/.emacs.d/elpa/workgroups2-20130915.1509")
(require 'workgroups2)
(setq package-enable-at-startup nil)
(package-initialize)
(desktop-save-mode nil) ; save all opened files (or disable it)
(setq wg-prefix-key (kbd "C-c w")
wg-restore-associated-buffers t ; restore all buffers opened in this WG?
wg-use-default-session-file t ; turn off for "emacs --daemon"
wg-default-session-file "~/.emacs.d/emacs_def.wg"
wg-use-faces nil
wg-morph-on nil) ; animation off
;; Keyboard shortcuts - load, save, switch
(global-set-key (kbd "<pause>") 'wg-reload-session)
(global-set-key (kbd "C-S-<pause>") 'wg-save-session)
(global-set-key (kbd "s-z") 'wg-switch-to-workgroup)
(global-set-key (kbd "s-/") 'wg-switch-to-previous-workgroup)
(workgroups-mode 1) ; Activate workgroups
EDIT: If I comment out that line, this is what the debugger gives me:
Debugger entered--Lisp error: (file-error "Cannot open load file" "workgroups2")
require(workgroups2)
eval-buffer(#<buffer *load*> nil "/home/d2b2/.emacs.d/init.el" nil t) ; Reading at buffer position 6014
load-with-code-conversion("/home/d2b2/.emacs.d/init.el" "/home/d2b2/.emacs.d/init.el" t t)
load("/home/d2b2/.emacs.d/init" t t)
#[0 "^H\205\262^# \306=\203^Q^#\307^H\310Q\202;^# \311=\204^^^#\307^H\312Q\202;^#\313\307\314\315#\203*^#\316\202;^#\313\307\314\317#\203:^#\320\nB^R\321\202;^#\316\$
command-line()
normal-top-level()
EDIT: Now commenting out both lines we have the following errors:
Debugger entered--Lisp error: (error ":END: line missing at position 186")
signal(error (":END: line missing at position 186"))
error(":END: line missing at position %s" 186)
org-flag-drawer(t)
org-cycle-hide-drawers(all)
org-set-startup-visibility()
org-mode()
desktop-restore-file-buffer("/home/d2b2/.todo" ".todo" nil)
#[nil "^H \236A\206^H^#\305\n^K\f#\207" [desktop-buffer-major-mode desktop-buffer-mode-handlers desktop-buffer-file-name desktop-buffer-name desktop-buffer-misc deskt$
desktop-create-buffer(206 "/home/d2b2/.todo" ".todo" org-mode (workgroups-mode) 1 (nil nil) nil nil ((buffer-file-coding-system . undecided-unix) (truncate-lines . t)))
eval-buffer(#<buffer *load*> nil "/home/d2b2/.emacs.desktop" nil t) ; Reading at buffer position 813
load-with-code-conversion("/home/d2b2/.emacs.desktop" "/home/d2b2/.emacs.desktop" t t)
load("/home/d2b2/.emacs.desktop" t t t)
desktop-read()
#[nil "\304\211^X \235\203^O^#\305^H \"^Q\306^R)\n\205^Z^#\307 \210\310\211^S\207" [key command-line-args desktop-save-mode inhibit-startup-screen "--no-desktop"$
run-hooks(after-init-hook)
command-line()
normal-top-level()
Make sure, that package-directory-list includes your path to elpa ~/.emacs.d/elpa.
Then package.el initializes some package, it adds name of package to
package-activated-list and pushes package directory
(e.g. ~/.emacs.d/elpa/workgroups2-20130915.1509) to load-path
automatically.
For me it works as usual, I don't add any specific pathes for packages manually.
The value of package-enable-at-startup is t in my config.
package-enable-at-startup doc:
"Whether to activate installed packages when Emacs starts...If the
value of package-enable-at-startup is nil, you can type M-x
package-initialize to activate the package system at any time."
(require 'workgroups2) is before package initialization in your config, try to move it below.
I'm trying to use emacs with preview-latex (C-c C-p C-b) to view my document. First a minimal example of my document:
\documentclass {article}
\usepackage{minted}
\begin{document}
\begin{listing}[H]
\begin{minted}{sql}
Select * from FOOBAR;
\end{minted}
\caption{Test Query}
\label{code:query}
\end{listing}
\end{document}
I already tried using Using minted (source code LaTeX package) with emacs/auctex the following answer but it does not seem to work with preview-latex.
I get the following error message:
! Package minted Error: You must invoke LaTeX with the -shell-escape flag.
So I changed my latex-mode-hook to the following:
(defun kungi/latex-mode-hook ()
(turn-on-flyspell)
(auto-complete-mode 1)
(turn-on-reftex)
(turn-on-auto-fill-mode)
(push
'("Latexmk" "latexmk -pdf %s" TeX-run-TeX nil t
:help "Run Latexmk on file")
TeX-command-list)
(eval-after-load "tex"
'(setcdr (assoc "LaTeX" TeX-command-list)
'("xelatex -shell-escape %t"
TeX-run-TeX nil (latex-mode doctex-mode) :help "Run LaTeX")))
(add-hook 'LaTeX-mode-hook
'kungi/latex-mode-hook)
Can you please tell me what I am doing wrong? Is it possible to use minted with preview latex?
I am using VIM with the LaTeX_Box plugin and I ran into a similar issue getting the very same error message. I could solve it by simply putting a file with the following contents to ~/.latexmkrc
$latex = 'latex --shell-escape';
$pdflatex = 'pdflatex --shell-escape';