When I write code in Matlab I make sure it is within the page width line of demarcation. I thought the purpose of this line was because it signified the width of a page, but when I use the publish option on my code, it wraps about 6 characters to the left of the demarcation line, onto the next line, which makes the publishing ugly.
Is there any way to fix this by either changing the line position or the publishing width (preferably the latter)?
Here's what my editor window looks like:
And here's the resulting PDF page from publishing this code:
(notice the wrap-around in line #2)
Yes, I hit the same ugliness and this is the best I could get:
The first comment was put as line by line in the editor, while the second commented chunk was put as a long single line, and I think the publisher decides where to cut which is a neater result, not perfect though.
Related
My question is if there is any command that allows me to go to the red error line in Eclipse. For example, I am in line 1 of my file and there is an error in line 1200 – is there any way to go directly to that line? (Obviously, I don't know the line number, so I don't use ctrl + L.)
As the commenter said, you can do this from the problems view, but there are ways to navigate somewhat efficiently in the source view.
While your cursor is in a file in the source view, the function "next" might be bound to "Ctrl+." (control-period). This is implemented in various scopes to do different things, but in the source view, it goes to the next "issue" in the file. If your only issue in the file is the error, then that keypress will bring you to that line.
In addition, the right-hand margin of the source view contains a column that spans the entire file. If there is an error on a line, you'll see a red horizontal block in that column. The height of the block would likely be relative to the size of the file. You can click on points in that column to go to that portion of the file, so if you click on the red mark, it will land close to that line.
I'm trying to use the multi cursor functionality of vscode on a large(ish) file.
the file is too large to select every line individually with ctrl-alt-up or down. In sublime-text I would select everything and push ctrl-shift-l. Is there a similar thing in vscode. I've tried using a regex search for ^, but that gives me an error stating "Expression matches everything".
The command Selection / Add Cursors to Line Ends altshifti will put a cursor on every line in the current selection. (For mac use optshifti)
Tip: You can pull up the keyboard shortcut reference sheet with ctrlk,ctrls (as in, those two keyboard combos in sequence).
(For mac use cmdk,cmds)
Hold Alt+Shift and select the block. Then press End or Right button.
You get selected individual lines.
I use version VSCode 1.5.3 in Windows.
Hold Alt+Shift+i
Hold Home (fn+-> Mac) for right-most or End for left most(fn+<- Mac)
This feature is actually called split selection into lines in many editors.
Sublime Text uses the default keybinding, CTRLSHIFT L
VSCode uses ALTSHIFTI
For Atom you actually need to edit your keymap to something like this
'.platform-win32 .editor, .platform-linux .editor':
'ctrl-shift-L': 'editor:split-selections-into-lines'
Real Lines vs Display Lines
First we have to understand the difference between Real Lines and Display Lines to completely understand the answer of the question.
When Word Wrap is enabled, each line of text that exceeds the width of the window will display as wrapped. As a result, a single line in the file may be represented by multiple lines on the display.
The easiest way to tell the difference between Real Lines and Display Lines is by looking at the line number in the left margin of the text editor. Lines that begin with a number correspond to the real lines, which may span one or more display lines. Each time a line is wrapped to fit inside the window, it begins without a line number.
Cursor At the Beginning of each Display Lines:
Cursor At the Beginning of each Real Lines:
Answer to the Question
Now that we know the difference between Display Lines and Real Lines, we can now properly answer the actual question.
Hold AltShift and select the text block.
Press Home to put cursor on the beginning of every Display Line.
Press End to put cursor on the end of every Display Line.
Press HomeHome (Home twice) to put cursor on the beginning of every Real Line.
Press EndEnd (End twice) to put cursor on the end of every Real Line.
Please understand that AltShiftI put cursor on the end of every Real Line.
Install the extension Sublime Commands.
[Sublime Commands] Adds commands from Sublime Text to VS Code: Transpose, Expand Selection to Line, Split into Lines, Join Lines.
(Don't forget to add the keybinding(s) from the extensions details page to your keybindings.json)
Doesn't VS Code already have a "split into lines" command?
Yes, yes it does. However it differs from the one in Sublime.
In VS Code, when you split into lines your selection gets deselected and a cursor appears at the end of each line that was selected (except for the last line where the cursor appears at the end of the selection).
In Sublime, when you split into lines a cursor appears at the end of each line (with the same exception as in VS Code) and the selection is divided on each line and "given" to the same line.
I have the same problem, i'm used to Alt + drag to do 'box selections' in visual studio but it does'n work in code.
It seems to be impossible for now to do it differently than by selecting every single line.
However plugins should be supported soon so we will likely see a plugin for this if not implemented directly by microsoft.
From visual studio uservoice forums:
We plan to offer plugin support for Visual Studio Code. Thank you for your interests and look for more details in our blog in the coming weeks. http://blogs.msdn.com/b/vscode.
For the preview we are looking for exactly this type of feedback. Keep it coming.
Sean McBreen – VS Code Team Member
I have a very long script in MATLAB (1500 lines) and want to test two different settings. To do so, I need to comment out some codes in a specific interval (e.g. form line 234 to line 255).
Is there a function in MATLAB that takes the intervals and comments/uncomments them automatically?
You can just highlight your code and click on the comment button. Highlight and click on uncomment to remove comment.In windows you may also use shortcut keys cntrl+r and cntrl+t. But yeah, the if else is a better idea but takes more time in the beginning to code in the if else.
I would agree with others that putting your code into a block surrounded by if-else would probably be a better solution than what you originally asked for.
But if you want to do it, you can use the following function:
function commentout(fromline, toline)
currentDoc = matlab.desktop.editor.getActive;
currentDoc.insertTextAtPositionInLine(sprintf('%%{\n'), fromline, 0)
currentDoc.insertTextAtPositionInLine(sprintf('%%}\n'), toline+1, 0)
This will work in most recent versions of MATLAB.
To uncomment, I think you'll need to do something a bit more complex, like getting the entire text from the active document, removing the specified comment lines, then setting the entire text back again (get, modify and set the Text property of the document).
I have text files which contain code inside an Editor. The user can run an analysis on a certain part of his code, which will result in a set of lines which should be hidden. Next I want to present the user with only the remaining lines, but with correct linenumbers, as from the original document. Possible solutions I thought of:
Open a new Editor which does not contain the hidden lines, but *somehow* still has correct line numbers
Hide the lines in the original editor, and offer a button for the user to 'unhide'. Probably a similar solution required as in 1.
I don't really know how to go about this. Folds would be a weird solution, because they can be unfolded individually, and seem to be more semantically tied to things like methods or classes. Also, simply creating a new document without the hidden lines results in wrong linenumbers.
Use a ProjectionViewer and reflection to invoke the private method ProjectionViewer.collapse(int offset int length). This method is only used internally to hide a certain portion of the text, by manipulating the ProjectionDocument (see http://eclipse.org/articles/Article-Folding-in-Eclipse-Text-Editors/folding.html).
After this, folding text in the editor using the annotations(the little +/- icons) WILL break everything, so this solution and regular folding are mutually exclusive.
Similar to the line that's normally at 80 characters, I would like to have a line follow my cursor and be displayed vertically on whichever column my cursor is on. It should extend to the top of the editor from the bottom; the same way the line is at column 80. This should be useful since I work in CoffeeScript a lot and need a quick way to match up indentations.
My answer doesn't really answer you question (though I have to answer it in order to post a screenshot); are you aware of this feature: