In Matlab, I have a 2x3 matrix, A, like this one:
A = [1 2 3; 4 5 6];
This matrix is defined inside of a function which takes a parameter, T. There are two cases that I need to take care of:
T < 10
T >= 10
If the user entered, say, T=40, then the 2nd row of A should be selected to make the calculations. On the other hand, if say T=5, the first row of A should be selected.
I can write a simple if-else condition like this:
if (T<10)
b = A(1,:) * ... %Do whatever with the first row
else
b = A(2,:) * ... %Do whatever with the second row
end
However I was wondering if it's possible to play around with Matlab indexes to save myself the overhead of having to write this if-else condition all around my code (this condition has to be checked many times, in different parts of my program).
For example, I was hoping to reach a simple expression like A(T<10, :) which would work fine if T<10 but for T>=10 would return an empty matrix.
I've been racking my brains for some hours but I'm a bit of a novice in optimising Matlab scripts. Could anyone kick me in the right direction?
You can use the following method:
A((T>=10) + 1, :)
Related
I have a 5-by-200 matrix where the i:50:200, i=1:50 are related to each other, so for example the matrix columns 1,51,101,151 are related to each other, and columns 49,99,149,199 are also related to each other.
I want to use a for-loop to create another matrix that re-sorts the previous matrix based on this relationship.
My code is
values=zeros(5,200);
for j=1:50
for m=1:4:200
a=factor_mat(:,j:50:200)
values(:,m)=a
end
end
However, the code does not work.
Here's what's happening. Let's say we're on the first iteration of the outer loop, so j == 1. This effectively gives you:
j = 1;
for m=1:4:200
a=factor_mat(:,j:50:200)
values(:,m)=a;
end
So you're creating the same submatrix for a (j doesn't change) 50 times and storing it at different places in the values matrix. This isn't really what you want to do.
To create each 4-column submatrix once and store them in 50 different places, you need to use j to tell you which of the 50 you're currently processing:
for j=1:50
a=factor_mat(:,j:50:200);
m=j*4; %// This gives us the **end** of the current range
values(:,m-3:m)=a;
end
I've used a little trick here, because the indices of Matlab arrays start at 1 rather than 0. I've calculated the index of the last column we want to insert. For the first group, this is column 4. Since j == 1, j * 4 == 4. Then I subtract 3 to find the first column index.
That will fix the problem you have with your loops. But loops aren't very Matlab-ish. They used to be very slow; now they're adequate. But they're still not the cool way to do things.
To do this without loops, you can use reshape and permute:
a=reshape(factor_mat,[],50,4);
b=permute(a,[1,3,2]);
values=reshape(b,[],200);
I need to convert this to Matlab code, and am struggling without the "table" function.
Table[{i,1000,ability,savingsrate,0,RandomInteger[{15,30}],1,0},{i,nrhhs}];
So basically, these values are all just numbers, and I think I need to use a function handle, or maybe a for loop. I'm no expert, so I really need some help?
I'm not an expert in Mathematics (just used it long time ago). According to this documentation for Table function, you are using this form:
Table[expr, {i, imax}]
generates a list of the values of expr when i runs from 1 to imax.
It looks like your statement will produce list duplicating the list in first argument increasing i from 1 to nrhhs and using different random number.
In MATLAB the output can be equivalent to a matrix or a cell array.
To create a matrix with rows as your lists you can do:
result = [ (1:nrhhs)', repmat([1000,ability,savingsrate,0],nrhhs,1), ...
randi([15 30],nrhhs,1), repmat([1,0],nrhhs,1) ];
You can convert the above matrix to a cell array:
resultcell = cell2mat(result, ones(nrhhs,1));
The "Table" example you gave creates a list of nrhhs sub-lists, each of which contains 8 numbers (i, 1000, ability, savingsrate, 0, a random integer between 15 and 30 inclusive, 1, and 0). This is essentially (though not exactly) the same as an nrhhs x 8 matrix.
Assuming you do just want a matrix out, though, an analogous for loop in Matlab would be:
result = zeros(nrhhs,8); % preallocate memory for the result
for i = 1:nrhhs
result(i,:) = [i 1000 ability savingsrate 0 randi([15 30]) 1 0];
end
This method is likely slower than yuk's answer (which makes much more efficient use of vectors to avoid the for loop), but might be a little easier to pick apart depending on how familiar you are with Matlab.
Could somebody explain the following code snippet? I have no background in computer science or programming and just recently became aware of Matlab. I understand the preallocation part from data=ceil(rand(7,5)*10)... to ...N*(N-1)/2).
I need to understand every aspect of how matlab processes the code from kk=0 to the end. Also, the reasons why the code is codified in that manner. There's no need to explain the function of: bsxfun(#minus), just how it operates in the scheme of the code.
data=ceil(rand(7,5)*10);
N = size(data,2);
b=cell(N-1,1);
c=NaN(size(data,1),N*(N-1)/2);
kk=0;
for ii=1:N-1
b{ii} = bsxfun(#minus,data(:,ii),data(:,ii+1:end));
c(:,kk+(1:N-ii)) = bsxfun(#minus,data(:,ii),data(:,ii+1:end));
kk=kk+N-ii;
end
Start at zero
kk=0;
Loop with ii going from 1 up to N-1 incrementing by 1 every iteration. Type 1:10 in the command line of matlab and you'll see that it outputs 1 2 3 4 5 6 7 8 9 10. Thuis colon operator is a very important operator to understand in matlab.
for ii=1:N-1
b{ii} = ... this just stores a matrix in the next element of the cell vector b. Cell arrays can hold anything in each of their elements, this is necessary as in this case each iteration is creating a matrix with one fewer column than the previous iteration.
data(:,ii) --> just get the iith column of the matrix data (: means get all the rows)
data(:, ii + 1:end) means get a subset of the matrix data consisting of all the rows but only of columns that appear after column ii
bsxfun(#minus, data(:,ii), data(:,ii+1:end)) --> for each column in the matrix data(:, ii+1:end), subtract the single column data(:,ii)
b{ii} = bsxfun(#minus,data(:,ii),data(:,ii+1:end));
%This does the same thing as the line above but instead of storing the resulting matrix of the loop in a separate cell of a cell array, this is appending the original array with the new matrix. Note that the new matrix will have the same number of rows each time but one fewer column, so this appends as new columns.
%c(:,kk + (1:N-ii)) = .... --> So 1:(N-ii) produces the numbers 1 up to the number of columns in the result of this iteration. In matlab, you can index an array using another array. So for example try this in the command line of matlab: a = [0 0 0 0 0]; a([1 3 5]) = 1. The result you should see is a = 1 0 1 0 1. but you can also extend a matrix like this so for example now type a(6) = 2. The result: a = 1 0 1 0 1 2. So by using c(:, 1:N-ii) we are indexing all the rows of c and also the right number of columns (in order). Adding the kk is just offsetting it so that we do not overwrite our previous results.
c(:,kk+(1:N-ii)) = bsxfun(#minus,data(:,ii),data(:,ii+1:end));
Now we just increment kk by the number of new columns we added so that in the next iteration, c is appended at the end.
kk=kk+N-ii;
end;
I suggest that you put a breakpoint in this code and step through it line by line and look at how the variables change in matlab. To do this click on the little dashed line next to k=0; in the mfile, you will see a red dot appear there, and then run the code. The code will only execute as far as the dot, you are now in debug mode. If you hover over a variable in debug mode matlab will show its contents in a tool tip. For a really big variable check it out in the workspace. Now step through the code line by line and use my explanations above to make sure you understand how each line is changing each variable. For more complex lines like b{ii} = bsxfun(#minus,data(:,ii),data(:,ii+1:end)); you should highlight code snippets and ruin these in the command line to see what each part is doing so for example run data(:,ii) to see what that does and then try data(:,ii+1:end)) or even just ii+1:end (well in that case it wont work, replace end with size(data, 2)). Debugging is the best way to understand code that confuses you.
bsxfun(#minus,A,B)
is almost the same as
A-B
The difference is that the bsxfun version will handle inputs of different size: In each dimension (“direction,” if you find it easier to think about that way), if one of the inputs is scalar and the other one a vector, the scalar one will simply be repeated sufficiently often.
http://www.mathworks.com/help/techdoc/ref/bsxfun.html
I'm a newbie to Matlab and just stumped how to do a simple task that can be easily performed in excel. I'm simply trying to get the percent change between cells in a matrix. I would like to create a for loop for this task. The data is setup in the following format:
DAY1 DAY2 DAY3...DAY 100
SUBJECT RESULTS
I could only perform getting the percent change between two data points. How would I conduct it if across multiple days and multiple subjects? And please provide explanation
Thanks a bunch
FOR EXAMPLE, FOR DAY 1 SUBJECT1(RESULT=1), SUBJECT2(RESULT=4), SUBJECT3(RESULT=5), DAY 2 SUBJECT1(RESULT=2), SUBJECT2(RESULT=8), SUBJECT3(RESULT=10), DAY 3 SUBJECT1(RESULT=1), SUBJECT2(RESULT=4), SUBJECT3(RESULT=5).
I WANT THE PERCENT CHANGE SO OUTPUT WILL BE DAY 2 SUBJECT1(RESULT=100%), SUBJECT2(RESULT=100%), SUBJECT3(RESULT=100%). DAY3 SUBJECT1(RESULT=50%), SUBJECT2(RESULT=50%), SUBJECT3(RESULT=50%)
updated:
Hi thanks for responding guys. sorry for the confusion. zebediah49 is pretty close to what I'm looking for. My data is for example a 10 x 10 double. I merely wanted to get the percentage change from column to column. For example, if I want the percentage change from rows 1 through 10 on all columns (from columns 2:10). I would like the code to function for any matrix dimension (e.g., 1000 x 1000 double) zebediah49 could you explain the code you posted? thanks
updated2:
zebediah49,
(data(1:end,100)- data(1:end,99))./data(1:end,99)
output=[data(:,2:end)-data(:,1:end-1)]./data(:,1:end-1)*100;
Observing the code above, How would I go about modifying it so that column 100 is used as the index against all of the other columns(1-99)? If I change the code to the following:
(data(1:end,100)- data(1:end,:))./data(1:end,:)
matlab is unable because of exceeding matrix dimensions. How would I go about implementing that?
UPDATE 3
zebediah49,
Worked perfectly!!! Originally I created a new variable for the index and repmat the index to match the matrices which was not a good idea. It took forever to replicate when dealing with large numbers.
Thanks for you contribution once again.
Thanks Chris for your contribution too!!! I was looking more on how to address and manipulate arrays within a matrix.
It's matlab; you don't actually want a loop.
output=input(2:end,:)./input(1:end-1,:)*100;
will probably do roughly what you want. Since you didn't give anything about your matlab structure, you may have to change index order, etc. in order to make it work.
If it's not obvious, that line defines output as a matrix consisting of the input matrix, divided by the input matrix shifted right by one element. The ./ operator is important, because it means that you will divide each element by its corresponding one, as opposed to doing matrix division.
EDIT: further explanation was requested:
I assumed you wanted % change of the form 1->1->2->3->1 to be 100%, 200%, 150%, 33%.
The other form can be obtained by subtracting 100%.
input(2:end,:) will grab a sub-matrix, where the first row is cut off. (I put the time along the first dimension... if you want it the other way it would be input(:,2:end).
Matlab is 1-indexed, and lets you use the special value end to refer to the las element.
Thus, end-1 is the second-last.
The point here is that element (i) of this matrix is element (i+1) of the original.
input(1:end-1,:), like the above, will also grab a sub-matrix, except that that it's missing the last column.
I then divide element (i) by element (i+1). Because of how I picked out the sub-matrices, they now line up.
As a semi-graphical demonstration, using my above numbers:
input: [1 1 2 3 1]
input(2,end): [1 2 3 1]
input(1,end-1): [1 1 2 3]
When I do the division, it's first/first, second/second, etc.
input(2:end,:)./input(1:end-1,:):
[1 2 3 1 ]
./ [1 1 2 3 ]
---------------------
== [1.0 2.0 1.5 0.3]
The extra index set to (:) means that it will do that procedure across all of the other dimension.
EDIT2: Revised question: How do I exclude a row, and keep it as an index.
You say you tried something to the effect of (data(1:end,100)- data(1:end,:))./data(1:end,:). Matlab will not like this, because the element-by-element operators need them to be the same size. If you wanted it to only work on the 100th column, setting the second index to be 100 instead of : would do that.
I would, instead, suggest setting the first to be the index, and the rest to be data.
Thus, the data is processed by cutting off the first:
output=[data(2:end,2:end)-data(2:end,1:end-1)]./data(2:end,1:end-1)*100;
OR, (if you neglect the start, matlab assumes 1; neglect the end and it assumes end, making (:) shorthand for (1:end).
output=[data(2:,2:end)-data(2:,1:end-1)]./data(2:,1:end-1)*100;
However, you will probably still want the indices back, in which case you will need to append that subarray back:
output=[data(1,1:end-1) data(2:,2:end)-data(2:,1:end-1)]./data(2:,1:end-1)*100];
This is probably not how you should be doing it though-- keep data in one matrix, and time or whatever else in a separate array. That makes it much easier to do stuff like this to data, without having to worry about excluding time. It's especially nice when graphing.
Oh, and one more thing:
(data(:,2:end)-data(:,1:end-1))./data(:,1:end-1)*100;
is identically equivalent to
data(:,2:end)./data(:,1:end-1)*100-100;
Assuming zebediah49 guessed right in the comment above and you want
1 4 5
2 8 10
1 4 5
to turn into
1 1 1
-.5 -.5 -.5
then try this:
data = [1,4,5; 2,8,10; 1,4,5];
changes_absolute = diff(data);
changes_absolute./data(1:end-1,:)
ans =
1.0000 1.0000 1.0000
-0.5000 -0.5000 -0.5000
You don't need the intermediate variable, you can directly write diff(data)./data(1:end,:). I just thought the above might be easier to read. Getting from that result to percentage numbers is left as an exercise to the reader. :-)
Oh, and if you really want 50%, not -50%, just use abs around the final line.
I'm trying to program a Matlab to list all permutations of the numbers 1 through n in lexicographic order. What I have so far is below. I am using recursion to try and write a program that will work for n=3 first, and then see if I can gain insight into writing the program for any n. So far I have 2 of the 6 columns for n=3: P=[1 2 3;1 3 2]. I need the next two columns to simply swap the ones and the twos. I don't know how to begin to do that.
function [P] = shoes(n)
if n == 1
P = 1;
elseif n == 2
P = [1 2; 2 1];
else
T = shoes(n-1) + 1;
G = ones(factorial(n-1),1);
P(1:2,1:3) = [G T];
end
See the documentation for a start. If by lexicographical order you mean alphabetical by english name, you may want to populate your input with the names, sort them, then permute that.
If I've misunderstood what you're wanting, comment or edit the question & I'll check back later.
Hints:
The permutations of an empty list are easy to find.
Induction is an important concept in mathematics. You should be familiar with it.
The environment you are working in supports recursion
The permutations of a longer list can be produced in the order you want by recursion; first figure out what you want the first element to be, and then figure out the rest.
If you get stuck again, edit the question posting what you've gotten so far and where/why you think you're stuck.
Hints after seeing your code.
Your core function permutes a vector, and so should take a vector as argument, not an integer
Don't start solving the n=3 case; try the n=0 case (it's []) and then go straight to the n=20 case.
Think about the n=20 case before you write any code. What is the first column going to look like? Are there any examples of the n=19 case hidden in the answer to the n=20 case? (The answer is yes, and they are all different).
Reread the first set of hints
You appear to have asked this question twice. Instead of reposting questions, you should simply click the "edit" link below your question and update it. I'll repost here the answer I gave to your other question, but you should really remove one of them.
If you have the following matrix:
A = [1 2 3; 1 3 2];
and you want all the ones to become twos and the twos to become ones, the following would be the simplest way to do it:
B = A;
B(A == 1) = 2;
B(A == 2) = 1;