Related
I have a form in a Mac app that needs to scroll. I have a scrollView embedded in a ViewController. I have the scrollView assigned with an identifier that links it to its own NSScrollView file. The constraints are set to the top, right, and left of the view controller, it also has the hight constraint set to the full height of the ViewController.
Here is my code:
import Cocoa
class ScrollView: NSScrollView {
override func draw(_ dirtyRect: NSRect) {
super.draw(dirtyRect)
// Drawing code here.
NSRect documentView.NSMakeSize(0, 0, 1058.width, 1232.height)
}
override func scrollWheel(with event: NSEvent) {
switch event.phase {
case NSEvent.Phase.began:
Swift.print("Began")
// case NSEvent.Phase.changed:
// Swift.print("Changed")
case NSEvent.Phase.ended:
Swift.print("Ended")
default:
break
}
switch event.momentumPhase {
case NSEvent.Phase.began:
Swift.print("Momentum Began")
// case NSEvent.Phase.changed:
// Swift.print("Momentum Changed")
case NSEvent.Phase.ended:
Swift.print("Momentum Ended")
default:
break
}
super.scrollWheel(with: event)
}
I cant seem to get my app to scroll at all. I think I am not setting the frame correctly. What is the best way to do set the frame correctly? Am I coding the NSScrollView correctly?
I think you are making your life very hard because you are doing things that are not exactly recommended by Apple. First of all, you should not subclass NSScrollView. Rather you should read first Introduction to Scroll View Programming Guide for Cocoa by Apple to understand how you should create the correct hierarchy of views for an NSScrollView to work correctly.
A second recommendation is for you to check this nice article about how you should set up an NSScrollView in a playground, so that you can play with the code you want to implement.
Third, using Autolayout and NSScrollView has caused a lot of grief to a lot of people. You need to set up the AutoLayout just right, so that everything is going to work as expected. I recommend that you check this answer by Ken Thomases, which clearly explains how you need to set up auto layout constraints for an NSScrollView to work properly.
I just got over the "hump" with a NSScrollView inside a NSWindow. In order for scrolling to occur the view inside the NSScrollview needs to be larger than the content window. That's hard to set with dynamic constraints. Statically setting the inner view to a larger width/height than the window "works" but the static sizes usually are not what you want.
Here is my interface builder view hierarchy and constraints, not including the programmatically added boxes
In my app the user is adding "boxes" (custom draggable views) inside the mainView, which is inside a scrollview in a NSwindow.
Here's the functionality I wanted:
If I expanded the NSWindow, I wanted the mainView inside the scrollview to expand to fill the whole window. No scrolling needed in this case if all the boxes are visible.
If I shrank the NSWindow, I wanted the mainView inside the scrollview to shrink just enough to include all my mainView subviews ("boxes"), but not any further (i added a minBorder of 20). This results in scrolling if a box's position is further right/up than the nswindow's width/height.
I found the trick is to calculate the size of the mainView I want based on the max corner of each draggable boxview, or the height/width of the content frame of the nswindow, whichever is larger.
Below is my code, including some debugging prints.
Be careful of which subviews you use to calculate the max size. If you include a subview that's dynamically attached to the right/top of the window, then your window will never shrink. If you add +20 border to that, you might infinite loop. Not a problem in my case.
extension MapWindowController: NSWindowDelegate {
func windowDidEndLiveResize(_ notification: Notification) {
if let frame = window?.frame, let content = window?.contentRect(forFrameRect: frame) {
print("window did resize \(frame)")
var maxX: CGFloat = content.width
var maxY: CGFloat = content.height
for view in mainView?.subviews ?? [] {
let frameMaxX = view.frame.maxX + minBorder
let frameMaxY = view.frame.maxY + minBorder
if frameMaxX > maxX {
maxX = frameMaxX
}
if frameMaxY > maxY {
maxY = frameMaxY
}
}
print("view maxX \(maxX) maxY \(maxY)")
print("window width \(content.width) height \(content.height)")
mainView?.setFrameSize(NSSize(width: maxX, height: maxY))
}
}
}
I have got an UIButton on a storyboard ViewController. When I load data into the form and the layout is significantly changing the button does not recognise the touch action.
I have figured out that when button is visible on the scrollview right after it if filled with data, the touch action works.
If the data too long and the button is not visible at first, just when it is scrolled into the display, the touch action does not work.
I was checking if something is above the button, but nothing. I have tried to change the zPosition of the button, not solved the problem.
What can be the issue?
I have made custom classes from the UIScrollView and the UIButton to check how the touches event triggered. It is showing the same behaviour, which is obvious. If the button is visible right at the beginning, the UIButton's touchesBegan event is triggered. If the button moves down and not visible at the beginning, it is never triggered, but the scrollview's touchesBegan is called instead.
Depending on the size of the data I load into the page sometimes the button is visible at the beginning, but the form can be still scrolled a bit. In this case the button still work, so it seems that this behaviour is not depending on if the scrollview is scrolled before or not, just on the initial visibility of the button.
Is there any layout or display refresh function which should be called to set back the behaviour to the button?
The code portion which ensures that the contentview is resized for the scroll if the filled data requires bigger space.
func fillFormWithData() {
dispDescription.text = jSonData[0]["advdescription"]
dispLongDescription.text = jSonData[0]["advlongdesc"]
priceandcurrency.text = jSonData[0]["advprice"]! + " " + jSonData[0]["advpricecur"]!
validitydate.text = jSonData[0]["advdate"]!
contentview.layoutIfNeeded()
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
contentview.frame.size.height = contentRect.size.height
scrollview.contentSize = contentview.bounds.size
}
Ok, so another update. I have coloured the contentview background to blue and the scrollview background to white. When I load the data and resize the layout constraints, the contentview is resizing as expected, however now the scrollview is going to the bottom. After I scroll the view it is resizing to the original size which fits the screen. Now the button is only recognised when I touch the are which is blue behind. With the white background it is not recognised anymore, so it seems that the scrollview is hiding the button.
Let me get this clear the button is added in storyboard and it is a spritekit project?? If you are using zPosition?? Why don’t u connect the UIButton via the assistant editor as an IBAction then the action is always tied to the button.
You can also do it differently
Create an SKLabelNode and put it on the screen where you want to have the button and then set a name to it as myButton
override func touchesBegan(_ touches: Set<UITouch>, with event:
UIEvent?) {
if let touch = touches.first {
let location = touch.location(in: self)
let tappedNodes = nodes(at: location)
for node in tappedNodes {
if node.name == "myButton" {
// call your action here
}
}
}
}
EDIT 1:
You could also try auto resizing your scrollView.content this works also if you are adding any views via the app or programmatically
private func resizeScrollView(){
print("RESIZING THE SCROLLVIEW from \(scrollView.contentSize)")
for view in scrollView.subviews {
contentRect = contentRect.union(view.frame)
}
scrollView.contentSize = CGSize(width: contentRect.size.width, height: contentRect.size.height + 150)
print("THE CONTENT SIZE AFTER RESIZING IS: \(scrollView.contentSize)")
}
EDIT 2: I think I found the issue with your project. You need to move the MessageButton(UzenetButton) above DispDescription label in the object inspector in that way it will always be above your message textView.
At the moment the UzeneButton is at the very far back in your view hierarchy so if your textView is resizing whilst editing it covers the button that is why you cannot click on it.
See #Endre Olah,
To make situation more clear do one more thing, set clipToBound property of contentview to true.
you will notice that after loading of data your button not fully visible, it means it is shifting out of bound of its parentView (ContentView)
And that's why button is not taking your touch. However, if you carefully touch upper part of button it still do its job. Because upper part is still in bound of ContentView
Solution :
After loading of data you have to make sure that you increase height of ContentView such that button should never go out of bound of its parentView(ContentView).
FOR EXAMPLE
#IBOutlet var heightConstraintOfContentView : NSLayoutConstraint!
After loading of data
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
heightConstraintOfContentView.constant = contentRect.size.height
contentView.layoutIfNeeded()
I use following steps when I need to use scrollview with dynamic content:
1) Firstly add a scrollView with top, bottom, trailing and leading is 0 to super view.
2) Add a view to scrollView and view's trailing, leading bottom and top space to scrollView can be set to 0 (or you can add margin optionally).
3) Now, you should add UI elements like buttons, labels with appropriate top, bottom, trailing and leading margins to each other.
4) Lastly, add equal height and equal width constraint to view with Safe Area:
and change equal height priority of view to 250:
It should solve your problem with UIScrollView.
Finally, I have found the solution in another chain, once it became clear that the scrollview's contentview is resizing on scroll event to the original size. (Not clear why this is like this, but that is the fact.)
So I had to add a height constraint to the contentview in the storyboard and create an outlet to it and adjust this constraint when the content size is changing, like this:
#IBOutlet weak var ContentViewHeight: NSLayoutConstraint!
func fillFormWithData() {
dispDescription.text = jSonData[0]["advdescription"]
dispLongDescription.text = jSonData[0]["advlongdesc"]
priceandcurrency.text = jSonData[0]["advprice"]! + " " + jSonData[0]["advpricecur"]!
validitydate.text = jSonData[0]["advdate"]!
contentview.layoutIfNeeded()
let contentRect = CGRect(x: 0, y: 0, width: scrollview.frame.width, height: uzenetbutton.frame.origin.y+uzenetbutton.frame.height+50)
contentview.bounds = contentRect
scrollview.contentSize = contentRect.size
----------- This is the key line to the success ----------
ContentViewHeight.constant = contentRect.size.height
----------------------------------------------------------
}
After this is added, it works perfectly.
I'm writing an app in Xcode 9 with Swift 4 and I've added a UIScrollview to a view which is intended to show a jPeg which is 3030 pixels in height. I've added the scrollview to my view and assigned the delegate in Outlets in IB. I've attached the IBOutlet called scrollView to the UIScrollview and added a UIImageView with the jPeg to the UIScrollview. I've set the size of the UIScrollView to 375W and 620H and then set the UIImageView to 375W and 3030H. this should complete the work in Interface builder.
In the Controller I've added UIScrollViewDelegate to the Class and added the code below to ViewDidLoad
//scrollView.delegate = self
scrollView.contentSize = CGSize(width: 375, height: 3040)
I've commented out the delegate line as I've done that in IB. When I run the app, the screen comes upon with the image but when I try to scroll it barely scrolls more than one screen. What have I missed?
You need to add a UIView inside your scrollview and then add that view top/bottom/leading/trailing 0 to scrollview then add your image view inside view and add image view bottom constraint to that view, So your scroll view will work properly.
Please refer below image for more details.
You have to place your scroll view inside a UIView and another UIView inside your scroll view.
Outer view Constraints: Leading,trailing,top and bottom - 0
Scroll view Constraints: Leading,trailing,top and bottom - 0
Inner view Constraints: Leading,trailling and top to Superview, Equal width to Outer view , Bottom space to -250 and Height equals 900(Height of your content)
Set your contentsize now.
You can implement as below image screen shots
//Height Constant of image
#IBOutlet weak var ConstHeight: NSLayoutConstraint!
override func viewDidLoad() {
super.viewDidLoad()
if #available(iOS 11.0, *) {
self.scrollView.contentInsetAdjustmentBehavior = .never
}else{
self.automaticallyAdjustsScrollViewInsets = false
}
//You can change height on here too
self.ConstHeight.constant = 800
}
I stuck with scrolling content inside UIScrollView in my tvOS app.
I have scrollView with height = 400 and width = 400. Inside this scrollview I have non-scrollable UITextView with height = 800 and width = 400. So I want to scroll this text.
But my scroll view is not scrolled, I don't see any scrolling indicators and also my scrollView have isFocused value = false. How can I solve this problem?
p.s. update I created separate ViewController (image below).
It have black ScrollView and white view with big height with label in the middle of it. ScrollView has fixed width and height and there is no scrolling for some reason! I even didn't connect any separate class - just created it from Interface builder.
UIView isn't focusable by default (and as such in tvOS it can't be scrolled) . You have to subclass it to override canBecomeFocused:
class myUIView: UIView {
override var canBecomeFocused: Bool {
return true
}
}
Then in your example use the class myUIView instead of UIView for your long white view. Setting the right constraints you wouldn't need to design the views out of the controller view boundaries in IB either. Check this answer with the linked gist to see how to build the constraints.
I think you can use the
func gestureRecognizer (_ gestureRecognizer: UIGestureRecognizer, shouldReceive touch: UITouch) -> Bool
method to judge the view and scroll it
According to the view you touch to do something to intercept
There is some way to fix your problem.
Please check your scrollview in storyboard, is your scrolling or vertical indicator is checked?
U can make your textview scrollable if u just want to scroll the textview content
There is problem in your constraint, you need to cleary add the height, vertical space top, vertical space bottom from your textview to your scrollview.
Hope these advice can help you
So you have to set the scrollview's content size larger than the scrollview bounds, so you should set contentsize to (400, 800), probaly in you xib
I need to do this app that has a weird configuration.
As shown in the next image, the main view is a UIScrollView. Then inside it should have a UIPageView, and each page of the PageView should have a UITableView.
I've done all this so far. But my problem is that I want the scrolling to behave naturally.
The next is what I mean naturally. Currently when I scroll on one of the UITableViews, it scrolls the tableview (not the scrollview). But I want it to scroll the ScrollView unless the scrollview cannot scroll cause it got to its top or bottom (In that case I'd like it to scroll the tableview).
For example, let's say my scrollview is currently scrolled to the top. Then I put my finger over the tableview (of the current page being shown) and start scrolling down. I this case, I want the scrollview to scroll (no the tableview). If I keep scrolling down my scrollview and it reaches the bottom, if I remove my finger from the display and put it back over the tebleview and scroll down again, I want my tableview to scroll down now because the scrollview reached its bottom and it's not able to keep scrolling.
Do you guys have any idea about how to implement this scrolling?
I'm REALLY lost with this. Any help will be greatly appreciate it :(
Thanks!
The solution to simultaneously handling the scroll view and the table view revolves around the UIScrollViewDelegate. Therefore, have your view controller conform to that protocol:
class ViewController: UIViewController, UIScrollViewDelegate {
I’ll represent the scroll view and table view as outlets:
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
We’ll also need to track the height of the scroll view content as well as the screen height. You’ll see why later.
let screenHeight = UIScreen.mainScreen().bounds.height
let scrollViewContentHeight = 1200 as CGFloat
A little configuration is needed in viewDidLoad::
override func viewDidLoad() {
super.viewDidLoad()
scrollView.contentSize = CGSizeMake(scrollViewContentWidth, scrollViewContentHeight)
scrollView.delegate = self
tableView.delegate = self
scrollView.bounces = false
tableView.bounces = false
tableView.scrollEnabled = false
}
where I’ve turned off bouncing to keep things simple. The key settings are the delegates for the scroll view and the table view and having the table view scrolling being turned off at first.
These are necessary so that the scrollViewDidScroll: delegate method can handle reaching the bottom of the scroll view and reaching the top of the table view. Here is that method:
func scrollViewDidScroll(scrollView: UIScrollView) {
let yOffset = scrollView.contentOffset.y
if scrollView == self.scrollView {
if yOffset >= scrollViewContentHeight - screenHeight {
scrollView.scrollEnabled = false
tableView.scrollEnabled = true
}
}
if scrollView == self.tableView {
if yOffset <= 0 {
self.scrollView.scrollEnabled = true
self.tableView.scrollEnabled = false
}
}
}
What the delegate method is doing is detecting when the scroll view has reached its bottom. When that has happened the table view can be scrolled. It is also detecting when the table view reaches the top where the scroll view is re-enabled.
I created a GIF to demonstrate the results:
Modified Daniel's answer to make it more efficient and bug free.
#IBOutlet weak var scrollView: UIScrollView!
#IBOutlet weak var tableView: UITableView!
#IBOutlet weak var tableHeight: NSLayoutConstraint!
override func viewDidLoad() {
super.viewDidLoad()
//Set table height to cover entire view
//if navigation bar is not translucent, reduce navigation bar height from view height
tableHeight.constant = self.view.frame.height-64
self.tableView.isScrollEnabled = false
//no need to write following if checked in storyboard
self.scrollView.bounces = false
self.tableView.bounces = true
}
func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
return 20
}
func tableView(_ tableView: UITableView, viewForHeaderInSection section: Int) -> UIView? {
let label = UILabel(frame: CGRect(x: 0, y: 0, width: tableView.frame.width, height: 30))
label.text = "Section 1"
label.textAlignment = .center
label.backgroundColor = .yellow
return label
}
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
let cell = tableView.dequeueReusableCell(withIdentifier: "cell", for: indexPath)
cell.textLabel?.text = "Row: \(indexPath.row+1)"
return cell
}
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView == self.scrollView {
tableView.isScrollEnabled = (self.scrollView.contentOffset.y >= 200)
}
if scrollView == self.tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
Complete project can be seen here:
https://gitlab.com/vineetks/TableScroll.git
After many trials and errors, this is what worked best for me. The solution has to solve two needs 1) determine who's scrolling property should be used; tableView or scrollView? 2) make sure that the tableView doesn't give authority to the scrollView until it has reached the top of it's table/content.
In order to see if the scrollview should be used for scrolling vs the tableview, i checked to see if the UIView right above my tableview was within frame. If the UIView is within frame, it's safe to say the scrollView should have authority to scroll. If the UIView is not within frame, that means that the tableView is taking up the entire window, and therefor should have authority to scroll.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.intersects(UIView.frame) == true {
//the UIView is within frame, use the UIScrollView's scrolling.
if tableView.contentOffset.y == 0 {
//tableViews content is at the top of the tableView.
tableView.isUserInteractionEnabled = false
tableView.resignFirstResponder()
print("using scrollView scroll")
} else {
//UIView is in frame, but the tableView still has more content to scroll before resigning its scrolling over to ScrollView.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
} else {
//UIView is not in frame. Use tableViews scroll.
tableView.isUserInteractionEnabled = true
scrollView.resignFirstResponder()
print("using tableView scroll")
}
}
hope this helps someone!
None of the answers here worked perfectly for me. Each one had it's owned nuanced problem (needing to do a repeated swipe when one scrollview hit it's bottom, or the scroll indicator not looking correct, etc), so figured I'd throw in another answer.
Ole Begemann has a great write up on doing this exactly https://oleb.net/blog/2014/05/scrollviews-inside-scrollviews/
Despite being an old post, the concepts still apply to the current APIs. Additionally, there is a maintained (Xcode 9 compatible) Objective-C implementation of his approach https://github.com/eyeem/OLEContainerScrollView
If you are facing problem with the nested scrolling issue , here tis the simplest solution for it .
go to your design screen
select your scroll view and then disable bounce on scroll
if your view uses table view inside scroll view then disable bounce on scroll of the table view as well
run and check it is solved
check how to disable bounce on scroll of a scroll view
check how to disable bounce on scroll of a tableview view
I was struggling with this problem, too. There is a very simple solution.
In interface builder:
create simple ViewController
add a simple View, it will be our header, and constrain it to superview
it's the red view on the example below
I have added 12px from top, left and right, and set fixed height to 128px
embed a PageViewController, making sure it is constrained to the superview, and not the header
Now, here comes the fun part: for each page you add, make sure its tableView has an offset from top. Thats it. You can do if with this code, for example (assuming you use UITableViewController as a page):
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
let tables = viewControllers.compactMap { $0 as? UITableViewController }
tables.forEach {
$0.tableView.contentInset = UIEdgeInsets(top: headerView.bounds.height, left: 0, bottom: 0, right: 0)
$0.tableView.contentOffset = CGPoint(x: 0, y: -headerView.bounds.height)
}
}
No messy scroll inside scroll inside table view, no mangling with delegates, no duplicated scrolls, perfectly natural behavior. If you can't see the header, it is probably because of the tableView background color. You have to set it to clear, for the header to be visible from under the tableView.
I think there are two options.
Since you know the size of the scroll view and the main view, you are unable to tell whether the scroll view hit the bottom or not.
if (scrollView.contentOffset.y >= (scrollView.contentSize.height - scrollView.frame.size.height)) {
// reach bottom
}
So when it hit; you basically set
[contentScrollView setScrollEnabled:NO];
and other way around for your tableView.
The other thing, which is more precise I think, is to add Gesture to your views.
UITapGestureRecognizer *tapRecognizer = [[UITapGestureRecognizer alloc]
initWithTarget:self action:#selector(respondToTapGesture:)];
// Specify that the gesture must be a single tap
tapRecognizer.numberOfTapsRequired = 1;
// Add the tap gesture recognizer to the view
[self.view addGestureRecognizer:tapRecognizer];
// Do any additional setup after loading the view, typically from a nib
So when you add Gesture, you can simply control the active view by changing setScrollEnabled in the respondToTapGesture.
I found an awesome library
MXParallaxHeader
In Storyboard just set UIScrollView class to MXScrollView then magic happens.
I used this class to handle my UIScrollView when I embed a UIPageViewController container view. even you can insert a parallax header view for more detail.
Also, this library provides Cocoapods and Carthage
I attached an image below which represent UIViewHierarchy.
MXScrollView Hierarchy
SWIFT 5
I had some trouble using Vineet's answer for when I could not guarantee the scrollView content offset (Y) due to various different screen sizes. To resolve this, I changed the first trigger event of when the tableView's scroll gets enabled.
func scrollViewDidScroll(_ scrollView: UIScrollView) {
if scrollView.bounds.contains(button.frame) {
tableView.isScrollEnabled = true
}
if scrollView == tableView {
self.tableView.isScrollEnabled = (tableView.contentOffset.y > 0)
}
}
The scrollView.bounds.contains will check if a given element's frame is FULLY within the scrollView's visible content. I set this to a button that I have below the tableView. You could set this to your tableVIew's frame instead if your only condition is that your tableView is fully visible.
I left the original implementation of when to disable the tableView's scroll and it works very well.
I tried the solution marked as the correct answer, but it was not working properly. The user need to click two times on the table view for scroll and after that I was not able to scroll the entire screen again. So I just applied the following code in viewDidLoad():
tableView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(tableViewSwiped)))
scrollView.addGestureRecognizer(UISwipeGestureRecognizer(target: self, action: #selector(scrollViewSwiped)))
And the code below is the implementation of the actions:
func tableViewSwiped(){
scrollView.isScrollEnabled = false
tableView.isScrollEnabled = true
}
func scrollViewSwiped(){
scrollView.isScrollEnabled = true
tableView.isScrollEnabled = false
}
One easy trick, if you want to achieve it is replacing parent scrollview with normal container view.
Adding a pan gesture on container view, you can play with top constraint of first view to assign negative values. You can keep a check of page View's origin if it achieves to top you can start assigning that value on content offset of the pageView's child view. Until user achieves the table view in a state of top most view in container view, you can keep page tableView's scrolling disabled and allow scrolling manually by setting content offset.
So initially the page view height will be collapsed (or say out of screen) or less at bottom. Later on scrolling down it will expand to take more space.
Gesture will automatically stop responding if out of frames say on nav bar or other view outside container view.
Gestures are a key to user interactive transitions used in many apps. You can mimic scroll for a certain time with it.
In my case I'm using constraint for height like that:
self.heightTableViewConstraint.constant = self.tableView.contentSize.height
self.scrollView.contentInset.bottom = self.tableView.contentSize.height
Below code works great for me
As I wanted to show some header after some scroll and table view supposed to scroll
And in ViewDidLoad add
override func viewDidLoad() {
super.viewDidLoad()
mainScrollView.delegate = self
}
Change 265 to whatever number you want to stop upper scroll
extension AccountViewController: UIScrollViewDelegate {
func scrollViewDidScroll(_ scrollView: UIScrollView) {
print(notebookTableView.contentOffset.y)
if notebookTableView.contentOffset.y < 265 {
if notebookTableView.contentOffset.y > 0 {
mainScrollView.setContentOffset(notebookTableView.contentOffset, animated: false)
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 0.0), animated: false)
}
} else {
mainScrollView.setContentOffset(CGPoint(x: 0.0, y: 265), animated: false)
}
}
}
CGFloat tableHeight = 0.0f;
YourArray =[response valueForKey:#"result"];
tableHeight = 0.0f;
for (int i = 0; i < [YourArray count]; i ++) {
tableHeight += [self tableView:self.aTableviewDoc heightForRowAtIndexPath:[NSIndexPath indexPathForRow:i inSection:0]];
}
self.aTableviewDoc.frame = CGRectMake(self.aTableviewDoc.frame.origin.x, self.aTableviewDoc.frame.origin.y, self.aTableviewDoc.frame.size.width, tableHeight);
Maybe brute-force, but working perfectly if cell heights are the same: by the way, I use auto layout.
for the tableView (or collectionView or whatever), set an arbitrary height in storyboard, and make an outlet to class. Wherever appropriate, (viewDidLoad() or...) set the tableView's height big enough so that tableView doesn't need to scroll. (need to know the number of rows in advance) Then only the outer scrollView will scroll nicely.