In Keycloak/Red Hat SSO 7.0, the base theme ships with a message bundle including accountTemporarilyDisabledMessage.
In the login theme, how do I detect that Keycloak has thrown the AuthenticationFlowError.USER_TEMPORARILY_DISABLED exception so that I can display this message rather than continuing to inaccurately report "Invalid username/password" (the default behavior)?
Keycloak/Red Hat SSO user Freemarker Templates to render their UI pages. So essentially I just need the name of the hook to reference in the login.ftl but there are no examples of this I can find.
Like #kiml42 in the known duplicate below, I'm trying to avoid having to make rest service calls to a server that is already being exposed by the Freemarker system they have set up.
Known duplicate question:
Keycloak: Indicate user is temporarily locked
Related Issues:
https://issues.jboss.org/browse/KEYCLOAK-4036
https://github.com/keycloak/keycloak/pull/3972/files/d1343ed8489c7635ad820687667f6bc38d8dfa54
Related
I'm trying to use keycloak with a react app, this is my current client configuration...I did this inside the master realm
this is my keycloak config
export const keycloakConfig = {
"realm": "master",
"auth-server-url": "http://localhost:8180/",
"ssl-required": "external",
"resource": "demo",
"public-client": true,
"confidential-port": 0,
"clientId" : "demo",
"url" : "http://localhost:8180/"
};
I based my code on this repo
now...I can login without problems in my app, and the displayed url is this
http://localhost:8180/realms/master/protocol/openid-connect/auth?client_id=demo&redirect_uri=http%3A%2F%2Flocalhost%3A3000%2F&state=ba9daf04-ffdb-4ad3-b912-8be846f0684b&response_mode=fragment&response_type=code&scope=openid&nonce=558d71b7-2c66-44f8-9297-84694dc571a8
but when I try to logout I get a message
Invalid parameter: redirect_uri
the logout url is this
http://localhost:8180/realms/master/protocol/openid-connect/logout?redirect_uri=http%3A%2F%2Flocalhost%3A3000%2F
I'm not sure if my client config is correct because this has several missing parameters in almost all tutorials that I've found
Do you know what could be the problem here?
thank you guys
From the Release Notes:
OpenID Connect Logout
Previous versions of Keycloak had supported automatic logout of the
user and redirecting to the application by opening logout endpoint URL
such as
http(s)://example-host/auth/realms/my-realm-name/protocol/openid-connect/logout?redirect_uri=encodedRedirectUri.
While that implementation was easy to use, it had potentially negative
impact on performance and security. The new version has better support
for logout based on the OpenID Connect RP-Initiated Logout
specification. The parameter redirect_uri is no longer supported;
also, in the new version, the user needs to confirm the logout. It is
possible to omit the confirmation and do automatic redirect to the
application when you include parameter post_logout_redirect_uri
together with the parameter id_token_hint with the ID Token used for
login.
The existing deployments are affected in the following ways:
If your application directly uses links to logout endpoint with the redirect_uri parameter, you may be required to change this as
described above. Consider either removing the redirect_uri parameter
entirely or replacing it with the id_token_hint and
post_logout_redirect_uri parameters.
If you use java adapters and your application does logout by call httpServletRequest.logout(), you are not affected because this call
uses the backchannel variant of the logout endpoint and that one was
not changed.
If you use the latest javascript adapter, you are also not affected. However if your application uses an older version of the
JavaScript adapter, you are affected as this adapter uses the variant
of the logout endpoint with the deprecated redirect_uri parameter. In
this case, you may need to upgrade to the latest version of the
JavaScript adapter.
For the Node.js adapter, the same guideline applies as for the JavaScript adapter. You are encouraged to update to the latest version
as the older version of the adapter uses the deprecated redirect_uri
parameter. With the latest Node.js adapter, you are not affected as
long as you use the logout based on the /logout URL as described in
the documentation or in the Node.js adapter example. However, in the
case when your application directly uses the method
keycloak.logoutUrl, you can consider adding idTokenHint as the second
argument to this method. The possibility to add idTokenHint as second
argument was newly added in this version. The idTokenHint needs to be
a valid ID Token that was obtained during the login. Adding
idTokenHint is optional, but if you omit it, your users will need to
confirm the logout screen as described earlier. Also they will not be
redirected back to the application after logout.
There is a backwards compatibility option, which allows your
application to still use the old format of the redirect_uri parameter.
You can enable this parameter when you start the server by entering
the following command:
bin/kc.[sh|bat]
--spi-login-protocol-openid-connect-legacy-logout-redirect-uri=true start
With this configuration, you can still use the format with the
redirect_uri parameter. Note the confirmation screen will be needed if
the id_token_hint is omitted. Warning The backwards compatibility
switch will be removed in some future version - probably Keycloak 21.
You are encouraged to update your clients as soon as possible as
described above rather than rely on this switch.
I've got the same problem already for hours. The only way I found a workaround is manually sending the user to:
/realms//protocol/openid-connect/logout
I started using Keycloak 18.0.0 since a few days and I cannot find any other solution for this problem. I guess it's only happening to when using the newest version. Maybe we should read the documentation better.
For last Keycloack versions you have to redirect explicitly to
https://you server url/auth/realms/matrix/protocol/openid-connect/logout
This issue comes when the keycloak is upgraded to version 18. So we also need to upgrade Keycloak JS & keycloak-angular package.
https://www.npmjs.com/package/keycloak-js
https://www.npmjs.com/package/keycloak-angular
Rest everything will be similar
I know there's an earlier question with this subject here, but the OP never reported if the one answer resolved the issue. And since
Internal Server Error
is about as user-unfriendly as you can get, I would love to change this to something that feels more like "a message" than "an anvil dropped on your foot".
I have found one other SO post that tangentially relates to this issue (about that disappearing "duplicate emails" switch), but the problem is indeed not about whether or not to allow duplicate emails (or how to revive hidden admin controls) but how a very ordinary issue is communicated to the user - well, like how Keycloak notifies the user when they try and register with an existing username.
We're currently using the Docker version of Keycloak 12.0.4 with some customisations (a custom BCrypt module, some logging changes) running in IBM Cloud, using a Postgresql DB. We also added a custom theme & internationalisation. The same error occurs also when using the default Keycloak theme, though.
Here are our Login settings:
It turned out to be a configuration issue, but so deeply hidden that even the Keycloak developer who looked into the ticket I created had glossed over it.
The perpetrator was in menu Configure > Authentication > tab: Flows > choose dropdown: Registration > Profile validation radio button [o REQUIRED | o DISABLED]
This was set to disabled, which in effect prevents the duplicate email check in the registration form that the Realm settings > tab: Login form suggest are active. But then, of course, the database won't like that, with above-mentioned result.
This combination of settings should at least issue a warning, of course. I hope this will be corrected.
I have activated some applications on Fiori launchpad for S4HANA, for example -Manage Purchase Order,Post Outgoing payments etc.
These application's tiles are showing on the launchpad ,but when I click on Post Outgoing payments tile,It is only shows the busy indicator(flower) on the screen. When I checked on the console, It is showingconsole log
I am getting this console message with every app.Please Help!
There is a mismatch in URL’s.
Your console log says:
Target mapping URL: /sap/bc/ui5_ui5/sap/sakp_genericui
and:
Application index URL:
/sap/bc/ui5_ui5/sap/sakp_gen_ui_s1/~A33B4ED42354B20C9DBBF59446~5
Please check, if the target mapping URL is referring to an existing SAPUI5 application.
Otherwise the target mapping needs to be corrected in the SAP Fiori launchpad designer.
Your console log also says:
A possible reason is that the component ID is not unique.
Please check, that the component id of all deployed SAPUI5 applications are system-wide unique and there are no duplicate id’s.
Otherwise you need to modify such a duplicate component id of your app in all files and folders of your project, to make it system-wide unique.
Finally you need to adjust the target mapping in the SAP Fiori Launchpad with the new unique component id.
I want to use the Embeddable Build Status Plugin for Jenkins. I am using Cloudbees. I granted Job/ViewStatus permissions to the anonymous user. When I add the Markdown to the README.md no icon is shown. I tried both the protected and the unprotected link.
# protected
[](https://johnjohndoe.ci.cloudbees.com/job/TypedPreferences/)
# unprotected
[](https://johnjohndoe.ci.cloudbees.com/job/TypedPreferences/)
By default DEV#cloud Jenkins instances are not visible, at all, to anonymous users. If you have configured role-based security and want anonymous users to have the selected roles, configure your system and check the box Enable read-only access for anonymous users.
Well, the question has been asked some time ago, but for others reaching it here, having the problem, that the image is still not shown within the Readme.md on GitHub/GitHub-Enterprise after performing the above mentioned configuration:
Make sure that both services are using the same protocol. In my case, we had GitHub-Enterprise running under HTTPS and Jenkins was running on HTTP.
The badge will not be shown in this case because of the possible security breach introduced by mixed content. You will find an appropriate error message in the console output of your browser (i.e. F12 in Chrome):
Mixed Content: The page at 'https://.../README.md' was loaded over HTTPS,
but requested an insecure image 'http://.../job/master/badge/icon'.
This request has been blocked; the content must be served over HTTPS.
It's of course quite obvious but something that can also be easily missed when searching on the wrong track.
I had an issue with space in the project name, so do not forget to replace spaces with %20
example:
[](.../Long%20Project%20Name/...)
I designed the infopath form. I am writing required programming code on button clicked event. But while publishing the infopath form i am getting error; Please observe: It should allow me to select "Form Library" option so that i can do. From Microsoft it is suggested from here that i need to remove code. but everything is required in my form. I need to deploy form with code. without code it is without any value.
I have associate tryst certificate as well as my form is with full trust.
My infopath services are configured properly.
I am running sharepoint2010 in 2-tier farm.
I am using Infopath 2010 with Sharepoint 2010.
What else i need to be added...?
If i removes code then it shows me and deployed properly.
Please , give me right direction.
**Edited:**
I deployed this form as form template and activated it by central admin site. and assigned to form library as content type. but while running this form (from Document-> New Document->MyContentTypeTemplate),
i got exception:
Business logic failed due to an exception.
(User: domainname\user, Form Name: MHPMEmployeeInformationTemplateChanged9, IP: , Request: http://spwfe1:7000/_layouts/FormServer.aspx?
XsnLocation=http://spwfe1:7000/FormServerTemplates/MHPMEmployeeInformationTemplateChanged9.xsn&SaveLocation=http:
//spwfe1:7000/OfficialResumeFormLibrary&Source=http://spwfe1:7000/OfficialResumeFormLibrary/Forms/AllItems.aspx&DefaultItemOpen=1, Form ID: urn:schemas-microsoft-com:
office:infopath:MHPMEmployeeInformationTemplateChanged9:-myXSD-2011-09-06T18-40-25, Type: UnauthorizedAccessException, Exception Message: Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80070005.) a2e8bb5f-26d2-485a-bf9c-0a333eaa71e7
Verbose Calling GlobalStorage.SetItem with index LastExceptionLogged value type UnauthorizedAccessException. a2e8bb5f-26d2-485a-bf9c-0a333eaa71e7
Medium Exception thrown from business logic event listener: System.UnauthorizedAccessException:
Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80070005.
at EmployeeInformation_Template.DocGenerator.CreateWordDocument(Resume objResume, Object oTemplate)
at EmployeeInformation_Template.FormCode.GetInfopathData() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at
Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Employe... a2e8bb5f-26d2-485a-bf9c-0a333eaa71e7
Why should This? : I wondered When Microsoft is avoiding to use Interop COM Objects to use for word file automation which i used in my infopath form. Look Here
What i have to do now? do i need to go with alternatives ? or move by trying to resolve the issues ??? Please , i need right direction.
This is by design. As soon as you have code in your form, your only option is to deploy as "Administrator approved Form".
To get the form to show in your library, do the following:
Upload it in the Central Administration (General Applications
Settings -> Manage Form Templates)
activate the according Feature In the "Advanced Settings" section of
your library
allow "ContentType Management"
Add the Form as ContentType