I am trying to execute this command:
PS C:\Program Files\PostgreSQL\9.4\bin> .\psql.exe -h front.linux-pgsql01.qa.local -p 5432 -d site -U qa -w -c "Delete from product_factor_lolek; COPY product_factor_lolek FROM E'C:\\OP_data\\SEARCH\\1.csv' delimiter '^' CSV;"
My file is located on this path: C:\OP_data\SEARCH\1.csv. But in fact, I've got an error:
ERROR: could not open file "C:\OP_data\SEARCH\1.csv" for reading: No such file or directory
I am using Windows server, PostgreSQL 9.4. What should I write for correct path?
P.S. I can't use \COPY
The COPY command will attempt to access your CSV file on Server (front.linux-pgsql01.qa.local), not in the client. So you must send your CSV to there and point the command to its path or use stdin as you mentioned:
psql.exe -h front.linux-pgsql01.qa.local -p 5432 -d site -U qa -w -c "Delete from product_factor_lolek; COPY product_factor_lolek FROM STDIN' delimiter '^' CSV;" < C:\OP_data\SEARCH\1.csv
Related
I have some .sql files with thousands of INSERT statements in them and need to run these inserts on my PostgreSQL database in order to add them to a table. The files are that large that it is impossible to open them and copy the INSERT statements into an editor window and run them there. I found on the Internet that you can use the following by navigating to the bin folder of your PostgreSQL install:
psql -d myDataBase -a -f myInsertFile
In my case:
psql -d HIGHWAYS -a -f CLUSTER_1000M.sql
I am then asked for a password for my user, but I cannot enter anything and when I hit enter I get this error:
psql: FATAL: password authentication failed for user "myUsername"
Why won't it let me enter a password. Is there a way round this as it is critical that I can run these scripts?
I got around this issue by adding a new entry in my pg_hba.conf file with the following structure:
# IPv6 local connections:
host myDbName myUserName ::1/128 trust
The pg_hba.conf file can usually be found in the 'data' folder of your PostgreSQL install.
Of course, you will get a fatal error for authenticating, because you do not include a user name...
Try this one, it is OK for me :)
psql -U username -d myDataBase -a -f myInsertFile
If the database is remote, use the same command with host
psql -h host -U username -d myDataBase -a -f myInsertFile
You should do it like this:
\i path_to_sql_file
See:
You have four choices to supply a password:
Set the PGPASSWORD environment variable. For details see the manual: http://www.postgresql.org/docs/current/static/libpq-envars.html
Use a .pgpass file to store the password. For details see the manual: http://www.postgresql.org/docs/current/static/libpq-pgpass.html
Use "trust authentication" for that specific user: http://www.postgresql.org/docs/current/static/auth-methods.html#AUTH-TRUST
Since PostgreSQL 9.1 you can also use a connection string: https://www.postgresql.org/docs/current/static/libpq-connect.html#LIBPQ-CONNSTRING
Use this to execute *.sql files when the PostgreSQL server is located in a difference place:
psql -h localhost -d userstoreis -U admin -p 5432 -a -q -f /home/jobs/Desktop/resources/postgresql.sql
-h PostgreSQL server IP address
-d database name
-U user name
-p port which PostgreSQL server is listening on
-f path to SQL script
-a all echo
-q quiet
Then you are prompted to enter the password of the user.
EDIT: updated based on the comment provided by #zwacky
If you are logged in into psql on the Linux shell the command is:
\i fileName.sql
for an absolute path and
\ir filename.sql
for the relative path from where you have called psql.
export PGPASSWORD=<password>
psql -h <host> -d <database> -U <user_name> -p <port> -a -w -f <file>.sql
Via the terminal log on to your database and try this:
database-# >#pathof_mysqlfile.sql
or
database-#>-i pathof_mysqlfile.sql
or
database-#>-c pathof_mysqlfile.sql
You can give both user name and PASSSWORD on the command line itself with the "-d" parameter
psql -d "dbname='urDbName' user='yourUserName' password='yourPasswd' host='yourHost'" -f yourFileName.sql
you could even do it in this way:
sudo -u postgres psql -d myDataBase -a -f myInsertFile
If you have sudo access on machine and it's not recommended for production scripts just for test on your own machine it's the easiest way.
2021 Solution
if your PostgreSQL database is on your system locally.
psql dbname < sqldump.sql username
If its hosted online
psql -h hostname dbname < sqldump.sql username
If you have any doubts or questions, please ask them in the comments.
Walk through on how to run an SQL on the command line for PostgreSQL in Linux:
Open a terminal and make sure you can run the psql command:
psql --version
which psql
Mine is version 9.1.6 located in /bin/psql.
Create a plain textfile called mysqlfile.sql
Edit that file, put a single line in there:
select * from mytable;
Run this command on commandline (substituting your username and the name of your database for pgadmin and kurz_prod):
psql -U pgadmin -d kurz_prod -a -f mysqlfile.sql
The following is the result I get on the terminal (I am not prompted for a password):
select * from mytable;
test1
--------
hi
me too
(2 rows)
psql -h localhost -d userstoreis -U admin -p 5432 -a -q -f /home/jobs/Desktop/resources/postgresql.sql
Parameter explanations:
-h PostgreSQL server IP address
-d database name
-U user name
-p port which PostgreSQL server is listening on
-f path to SQL script
-a all echo
-q quiet
You can open a command prompt and run as administrator. Then type
../bin>psql -f c:/...-h localhost -p 5432 -d databasename -U "postgres"
Password for user postgres: will show up.
Type your password and enter. I couldn't see the password what I was typing, but this time when I press enter it worked. Actually I was loading data into the database.
I achived that wrote (located in the directory where my script is)
::someguy#host::$sudo -u user psql -d my_database -a -f file.sql
where -u user is the role who owns the database where I want to execute the script then the psql connects to the psql console after that -d my_database loads me in mydatabase finally -a -f file.sql where -a echo all input from the script and -f execute commands from file.sql into mydatabase, then exit.
I'm using:
psql (PostgreSQL) 10.12
on (Ubuntu 10.12-0ubuntu0.18.04.1)
A small improvement in #wingman__7 's 2021 answer: if your username contains certain characters (an underscore in my case), you need to pass it with the -U flag.
This worked for me:
$ psql -h db.host -d db_name -U my_user < query.sql
Try using the following command in the command line console:
psql -h localhost -U postgres -f restore.sql
I am trying to use a psql loop to load a directory of csv files into an AWS RDS Postgres database.
This StackExchange post answers how to do so locally and the following code works with a single file:
PGPASSWORD='MyPassword' psql -h my-rds.instance.us-east-1.rds.amazonaws.com -U user -d mydatabase -c '\COPY dbo.input_table FROM ''MySingleFile.csv'' CSV HEADER'
but I can't "combine" the two features. This code is the closest I can get but I get the following error for each file that is identified by the ls *.csv command:
for x in $(ls *.csv);
do PGPASSWORD='MyPassword' psql -h my-rds.instance.us-east-1.rds.amazonaws.com -U user -d mydatabase -c "\COPY dbo.input_table FROM ''MySingleFile.csv'' CSV HEADER"; done
ERROR: conflicting or redundant options
...
ERROR: conflicting or redundant options
While importing .sql file in phppgadmin it produces an error
"Import error: Failed to automatically determine the file format".
How to import the file?
And in terminal it shows as
postgres-# \i Documents/sample.sql
Documents/sample.sql: No such file or directory
But the file exists in the particular location. How to import .sql file in Postgresql and in Phppgadmin
You can do this by command line:
Get login with your psql through command line and
just run the following command in your terminal
psql 'databasename' < 'database_dump'
just replace 'databasename' with your database and 'database_dump' with the file you want to import.
You can run a file using below command
psql -U postgres -d postgres -a -f ./test.sql
or if you have to pass a host
psql -h -p 5432 -U postgres -d -a -f ./test2.sql
You can refer this blog https://trueway-blog.com/run-sql-file-with-psql/
I have some .sql files with thousands of INSERT statements in them and need to run these inserts on my PostgreSQL database in order to add them to a table. The files are that large that it is impossible to open them and copy the INSERT statements into an editor window and run them there. I found on the Internet that you can use the following by navigating to the bin folder of your PostgreSQL install:
psql -d myDataBase -a -f myInsertFile
In my case:
psql -d HIGHWAYS -a -f CLUSTER_1000M.sql
I am then asked for a password for my user, but I cannot enter anything and when I hit enter I get this error:
psql: FATAL: password authentication failed for user "myUsername"
Why won't it let me enter a password. Is there a way round this as it is critical that I can run these scripts?
I got around this issue by adding a new entry in my pg_hba.conf file with the following structure:
# IPv6 local connections:
host myDbName myUserName ::1/128 trust
The pg_hba.conf file can usually be found in the 'data' folder of your PostgreSQL install.
Of course, you will get a fatal error for authenticating, because you do not include a user name...
Try this one, it is OK for me :)
psql -U username -d myDataBase -a -f myInsertFile
If the database is remote, use the same command with host
psql -h host -U username -d myDataBase -a -f myInsertFile
You should do it like this:
\i path_to_sql_file
See:
You have four choices to supply a password:
Set the PGPASSWORD environment variable. For details see the manual: http://www.postgresql.org/docs/current/static/libpq-envars.html
Use a .pgpass file to store the password. For details see the manual: http://www.postgresql.org/docs/current/static/libpq-pgpass.html
Use "trust authentication" for that specific user: http://www.postgresql.org/docs/current/static/auth-methods.html#AUTH-TRUST
Since PostgreSQL 9.1 you can also use a connection string: https://www.postgresql.org/docs/current/static/libpq-connect.html#LIBPQ-CONNSTRING
Use this to execute *.sql files when the PostgreSQL server is located in a difference place:
psql -h localhost -d userstoreis -U admin -p 5432 -a -q -f /home/jobs/Desktop/resources/postgresql.sql
-h PostgreSQL server IP address
-d database name
-U user name
-p port which PostgreSQL server is listening on
-f path to SQL script
-a all echo
-q quiet
Then you are prompted to enter the password of the user.
EDIT: updated based on the comment provided by #zwacky
If you are logged in into psql on the Linux shell the command is:
\i fileName.sql
for an absolute path and
\ir filename.sql
for the relative path from where you have called psql.
export PGPASSWORD=<password>
psql -h <host> -d <database> -U <user_name> -p <port> -a -w -f <file>.sql
Via the terminal log on to your database and try this:
database-# >#pathof_mysqlfile.sql
or
database-#>-i pathof_mysqlfile.sql
or
database-#>-c pathof_mysqlfile.sql
You can give both user name and PASSSWORD on the command line itself with the "-d" parameter
psql -d "dbname='urDbName' user='yourUserName' password='yourPasswd' host='yourHost'" -f yourFileName.sql
you could even do it in this way:
sudo -u postgres psql -d myDataBase -a -f myInsertFile
If you have sudo access on machine and it's not recommended for production scripts just for test on your own machine it's the easiest way.
2021 Solution
if your PostgreSQL database is on your system locally.
psql dbname < sqldump.sql username
If its hosted online
psql -h hostname dbname < sqldump.sql username
If you have any doubts or questions, please ask them in the comments.
Walk through on how to run an SQL on the command line for PostgreSQL in Linux:
Open a terminal and make sure you can run the psql command:
psql --version
which psql
Mine is version 9.1.6 located in /bin/psql.
Create a plain textfile called mysqlfile.sql
Edit that file, put a single line in there:
select * from mytable;
Run this command on commandline (substituting your username and the name of your database for pgadmin and kurz_prod):
psql -U pgadmin -d kurz_prod -a -f mysqlfile.sql
The following is the result I get on the terminal (I am not prompted for a password):
select * from mytable;
test1
--------
hi
me too
(2 rows)
psql -h localhost -d userstoreis -U admin -p 5432 -a -q -f /home/jobs/Desktop/resources/postgresql.sql
Parameter explanations:
-h PostgreSQL server IP address
-d database name
-U user name
-p port which PostgreSQL server is listening on
-f path to SQL script
-a all echo
-q quiet
You can open a command prompt and run as administrator. Then type
../bin>psql -f c:/...-h localhost -p 5432 -d databasename -U "postgres"
Password for user postgres: will show up.
Type your password and enter. I couldn't see the password what I was typing, but this time when I press enter it worked. Actually I was loading data into the database.
I achived that wrote (located in the directory where my script is)
::someguy#host::$sudo -u user psql -d my_database -a -f file.sql
where -u user is the role who owns the database where I want to execute the script then the psql connects to the psql console after that -d my_database loads me in mydatabase finally -a -f file.sql where -a echo all input from the script and -f execute commands from file.sql into mydatabase, then exit.
I'm using:
psql (PostgreSQL) 10.12
on (Ubuntu 10.12-0ubuntu0.18.04.1)
A small improvement in #wingman__7 's 2021 answer: if your username contains certain characters (an underscore in my case), you need to pass it with the -U flag.
This worked for me:
$ psql -h db.host -d db_name -U my_user < query.sql
Try using the following command in the command line console:
psql -h localhost -U postgres -f restore.sql
I am trying to backup my database and keep getting error :
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '$ mysqldump -u root -p chandlers > backup_db.sql' at line 1
I am using the following command to launch the backup :
$ mysqldump -h localhost -u root -p chandlers > backup_db.sql
edit>>>>
This is how I connect to the db, this is a shortcut I have setup to open a command line :
C:\server2go\server2go\server\mysql\bin\mysql.exe -h localhost -P 7188 -u root
This works fine and connects, I have tried creating another like this >>
C:\server2go\server2go\server\mysql\bin\mysqldump.exe $ mysqldump -h localhost -P 7188 -u root -pchandlers > backup_db.sql
but I am getting an access denied error now.
you can use mysqldump to backup mysql database.
Below is the script example to backup mysql database in command line:-
$ mysqldump -h localhost -u username -p database_name > backup_db.sql
If your mysql database is very big, you might want to compress your sql file.
Just use the mysql backup command below and pipe the output to gzip,
then you will get the output as gzip file.
$ mysqldump -u username -h localhost -p database_name | gzip -9 > backup_db.sql.gz
If you want to extract the .gz file, use the command below:-
$ gunzip backup_db.sql.gz
You seem to be calling mysqldump from within mySQL, which is incorrect - it's a separate executable.
Call it from the command line instead.
I think it should be $ mysqldump -h localhost -u root -pchandlers > backup_db.sql. Otherwise it seems fine to me.