I'm trying to fill an area between two curves with respect to a function which depends on the values of the curves.
Here is the code of what I've managed to do so far
i=50;
cc = #(xx,x,y) 1./(1+(exp(-xx)/(exp(-x)-exp(-y))));
n_vec = 2:0.1:10;
x_vec = linspace(2,10,length(n_vec));
y_vec = abs(sin(n_vec));
N=[n_vec,fliplr(n_vec)];
X=[x_vec,fliplr(y_vec)];
figure(1)
subplot(2,1,1)
hold on
plot(n_vec,x_vec,n_vec,y_vec)
hp = patch(N,X,'b')
plot([n_vec(i) n_vec(i)],[x_vec(i),y_vec(i)],'linewidth',5)
xlabel('n'); ylabel('x')
subplot(2,1,2)
xx = linspace(y_vec(i),x_vec(i),100);
plot(xx,cc(xx,y_vec(i),x_vec(i)))
xlabel('x'); ylabel('c(x)')
This code produces the following graph
The color code which I've added represent the color coding that each line (along the y axis at a point on the x axis) from the area between the two curves should be.
Overall, the entire area should be filled with a gradient color which depends on the values of the curves.
I've assisted the following previous questions but could not resolve a solution
MATLAB fill area between lines
Patch circle by a color gradient
Filling between two curves, according to a colormap given by a function MATLAB
NOTE: there is no importance to the functional form of the curves, I would prefer an answer which refers to two general arrays which consist the curves.
The surf plot method
The same as the scatter plot method, i.e. generate a point grid.
y = [x_vec(:); y_vec(:)];
resolution = [500,500];
px = linspace(min(n_vec), max(n_vec), resolution(1));
py = linspace(min(y), max(y), resolution(2));
[px, py] = meshgrid(px, py);
Generate a logical array indicating whether the points are inside the polygon, but no need to extract the points:
in = inpolygon(px, py, N, X);
Generate Z. The value of Z indicates the color to use for the surface plot. Hence, it is generated using the your function cc.
pz = 1./(1+(exp(-py_)/(exp(-y_vec(i))-exp(-x_vec(i)))));
pz = repmat(pz',1,resolution(2));
Set Z values for points outside the area of interest to NaN so MATLAB won't plot them.
pz(~in) = nan;
Generate a bounded colourmap (delete if you want to use full colour range)
% generate colormap
c = jet(100);
[s,l] = bounds(pz,'all');
s = round(s*100);
l = round(l*100);
if s ~= 0
c(1:s,:) = [];
end
if l ~= 100
c(l:100,:) = [];
end
Finally, plot.
figure;
colormap(jet)
surf(px,py,pz,'edgecolor','none');
view(2) % x-y view
Feel free to turn the image arround to see how it looks like in the Z-dimention - beautiful :)
Full code to test:
i=50;
cc = #(xx,x,y) 1./(1+(exp(-xx)/(exp(-x)-exp(-y))));
n_vec = 2:0.1:10;
x_vec = linspace(2,10,length(n_vec));
y_vec = abs(sin(n_vec));
% generate grid
y = [x_vec(:); y_vec(:)];
resolution = [500,500];
px_ = linspace(min(n_vec), max(n_vec), resolution(1));
py_ = linspace(min(y), max(y), resolution(2));
[px, py] = meshgrid(px_, py_);
% extract points
in = inpolygon(px, py, N, X);
% generate z
pz = 1./(1+(exp(-py_)/(exp(-y_vec(i))-exp(-x_vec(i)))));
pz = repmat(pz',1,resolution(2));
pz(~in) = nan;
% generate colormap
c = jet(100);
[s,l] = bounds(pz,'all');
s = round(s*100);
l = round(l*100);
if s ~= 0
c(1:s,:) = [];
end
if l ~= 100
c(l:100,:) = [];
end
% plot
figure;
colormap(c)
surf(px,py,pz,'edgecolor','none');
view(2)
You can use imagesc and meshgrids. See comments in the code to understand what's going on.
Downsample your data
% your initial upper and lower boundaries
n_vec_long = linspace(2,10,1000000);
f_ub_vec_long = linspace(2, 10, length(n_vec_long));
f_lb_vec_long = abs(sin(n_vec_long));
% downsample
n_vec = linspace(n_vec_long(1), n_vec_long(end), 1000); % for example, only 1000 points
% get upper and lower boundary values for n_vec
f_ub_vec = interp1(n_vec_long, f_ub_vec_long, n_vec);
f_lb_vec = interp1(n_vec_long, f_lb_vec_long, n_vec);
% x_vec for the color function
x_vec = 0:0.01:10;
Plot the data
% create a 2D matrix with N and X position
[N, X] = meshgrid(n_vec, x_vec);
% evaluate the upper and lower boundary functions at n_vec
% can be any function at n you want (not tested for crossing boundaries though...)
f_ub_vec = linspace(2, 10, length(n_vec));
f_lb_vec = abs(sin(n_vec));
% make these row vectors into matrices, to create a boolean mask
F_UB = repmat(f_ub_vec, [size(N, 1) 1]);
F_LB = repmat(f_lb_vec, [size(N, 1) 1]);
% create a mask based on the upper and lower boundary functions
mask = true(size(N));
mask(X > F_UB | X < F_LB) = false;
% create data matrix
Z = NaN(size(N));
% create function that evaluates the color profile for each defined value
% in the vectors with the lower and upper bounds
zc = #(X, ub, lb) 1 ./ (1 + (exp(-X) ./ (exp(-ub) - exp(-lb))));
CData = zc(X, f_lb_vec, f_ub_vec); % create the c(x) at all X
% put the CData in Z, but only between the lower and upper bound.
Z(mask) = CData(mask);
% normalize Z along 1st dim
Z = normalize(Z, 1, 'range'); % get all values between 0 and 1 for colorbar
% draw a figure!
figure(1); clf;
ax = axes; % create some axes
sc = imagesc(ax, n_vec, x_vec, Z); % plot the data
ax.YDir = 'normal' % set the YDir to normal again, imagesc reverses it by default;
xlabel('n')
ylabel('x')
This already looks kinda like what you want, but let's get rid of the blue area outside the boundaries. This can be done by creating an 'alpha mask', i.e. set the alpha value for all pixels outside the previously defined mask to 0:
figure(2); clf;
ax = axes; % create some axes
hold on;
sc = imagesc(ax, n_vec, x_vec, Z); % plot the data
ax.YDir = 'normal' % set the YDir to normal again, imagesc reverses it by default;
% set a colormap
colormap(flip(hsv(100)))
% set alpha for points outside mask
Calpha = ones(size(N));
Calpha(~mask) = 0;
sc.AlphaData = Calpha;
% plot the other lines
plot(n_vec, f_ub_vec, 'k', n_vec, f_lb_vec, 'k' ,'linewidth', 1)
% set axis limits
xlim([min(n_vec), max(n_vec)])
ylim([min(x_vec), max(x_vec)])
there is no importance to the functional form of the curves, I would prefer an answer which refers to two general arrays which consist the curves.
It is difficult to achieve this using patch.
However, you may use scatter plots to "fill" the area with coloured dots. Alternatively, and probably better, use surf plot and generate z coordinates using your cc function (See my seperate solution).
The scatter plot method
First, make a grid of points (resolution 500*500) inside the rectangular space bounding the two curves.
y = [x_vec(:); y_vec(:)];
resolution = [500,500];
px = linspace(min(n_vec), max(n_vec), resolution(1));
py = linspace(min(y), max(y), resolution(2));
[px, py] = meshgrid(px, py);
figure;
scatter(px(:), py(:), 1, 'r');
The not-interesting figure of the point grid:
Next, extract the points inside the polygon defined by the two curves.
in = inpolygon(px, py, N, X);
px = px(in);
py = py(in);
hold on;
scatter(px, py, 1, 'k');
Black points are inside the area:
Finally, create color and plot the nice looking gradient colour figure.
% create color for the points
cid = 1./(1+(exp(-py)/(exp(-y_vec(i))-exp(-x_vec(i)))));
c = jet(101);
c = c(round(cid*100)+1,:); % +1 to avoid zero indexing
% plot
figure;
scatter(px,py,16,c,'filled','s'); % use size 16, filled square markers.
Note that you may need a fairly dense grid of points to make sure the white background won't show up. You may also change the point size to a bigger value (won't impact performance).
Of cause, you may use patch to replace scatter but you will need to work out the vertices and face ids, then you may patch each faces separately with patch('Faces',F,'Vertices',V). Using patch this way may impact performance.
Complete code to test:
i=50;
cc = #(xx,x,y) 1./(1+(exp(-xx)/(exp(-x)-exp(-y))));
n_vec = 2:0.1:10;
x_vec = linspace(2,10,length(n_vec));
y_vec = abs(sin(n_vec));
% generate point grid
y = [x_vec(:); y_vec(:)];
resolution = [500,500];
px_ = linspace(min(n_vec), max(n_vec), resolution(1));
py_ = linspace(min(y), max(y), resolution(2));
[px, py] = meshgrid(px_, py_);
% extract points
in = inpolygon(px, py, N, X);
px = px(in);
py = py(in);
% generate color
cid = 1./(1+(exp(-py)/(exp(-y_vec(i))-exp(-x_vec(i)))));
c = jet(101);
c = c(round(cid*100)+1,:); % +1 to avoid zero indexing
% plot
figure;
scatter(px,py,16,c,'filled','s');
I Have an issue to create some geometries inside a phantom with Filed II framework. I did create a circle, but now I have problem to create a square inside the phantom.
It is the following code to produce it in Matlab. The line of code that produce inside, is my issue. For the circle, I did calculate the distance of two points inside the circle and when it is less than the radius of the circle, they are inside the circle. But I have problem for triangle or square.
Phantom.x_size = 50/1000; % Width of phantom [mm]
Phantom.y_size = 10/1000; % Transverse width of phantom [mm]
Phantom.z_size = 60/1000; % Height of phantom [mm]
Phantom.z_start = 30/1000; % Start of phantom surface [mm];
N = Calculate_number_of_scatterers(Phantom);
N = 1000*ceil(N/1000);
% Create the general scatterers
x = (rand (N,1)-0.5)*Phantom.x_size;
y = (rand (N,1)-0.5)*Phantom.y_size;
z = rand (N,1)*Phantom.z_size + Phantom.z_start;
% Generate the amplitudes with a Gaussian distribution
amplitudes = randn(N,1);
%Make the cyst
r = 8/2/1000; %radius of cyst[mm]
xc = 10/1000; %place of the cyst
zc = 40/1000 + Phantom.z_start;
% [in,out] = inpolygon(xc,zc,x,z);
inside = ( ((x-xc).^2 + (z-zc).^2) < r^2); % scatteres inside the cyst
amplitudes = amplitudes .* (1-inside); % amplitude of the scatteres inside the cyst
Phantom.positions = [x y z];
Phantom.amplitudes = amplitudes;
figure;
plot3(Phantom.positions(:,1), Phantom.positions(:,3),Phantom.amplitudes,'.')
I am trying to make a cut out of a pipe and I want to make a curved surface to represent the outside of the pipe. However when I plot the surface I only get the diagonal of the surface instead of the surface itself. How can I fix this?
MWE:
r = 0:0.1:3;
z = 0:0.1:10;
[rr, zz] = meshgrid(r,z);
% set cut planes angles
theta1 = 0;
theta2 = pi*135/180;
nt = 101; % angle resolution
figure(1);
clf;
t3 = linspace(theta1, (theta2 - 2*pi), nt);
[rr3, tt3] = meshgrid(r,t3);
% Create curved surface
xx5 = r(end) * cos(tt3);
yy5 = r(end) * sin(tt3);
h5 = surface(xx5, yy5,zz)
The mesh-grid you created is based on theta and the radius. However, the radius is constant for the outside of the pipe so instead it should be based on theta and z since those are the two independent variables defining the grid. Based on this reasoning I believe the following is what you're after.
r = 0:0.1:3;
z = 0:0.1:10;
% set cut planes angles
theta1 = 0;
theta2 = pi*135/180;
nt = 101; % angle resolution
figure(1);
clf;
% create a grid over theta and z
t3 = linspace(theta1, (theta2 - 2*pi), nt);
[tt3, zz3] = meshgrid(t3, z);
% convert from cylindical to Cartesian coordinates
xx5 = r(end) * cos(tt3);
yy5 = r(end) * sin(tt3);
% plot surface
h5 = surface(xx5, yy5, zz3, 'EdgeColor', 'none');
% extra stuff to make plot prettier
axis vis3d
axis equal
view(3)
camzoom(0.7);
Try with surf with surf(xx5, yy5, zz). Is this what you are looking for?
I have an axisymmetric flow with m x n grid points in r and z direction and I want to plot the temperature that is stored in a matrix with size mxn in a 3D cylindrical plot as visualized in the link below (My reputation is not high enough to include it as a picture).
I have managed to plot it in 2D (r,z plane) using contour but I would like to add the theta plane for visualization. How can I do this?
You can roll your own with multiple calls to surface().
Key idea is: for each surface: (1) theta=theta1, (2) theta=theta2, (3) z=zmax, (4) z=0, (5) r=rmax, generate a 3D mesh (xx,yy,zz) and the temperature map on that mesh. So you have to think about how to construct each surface mesh.
Edit: completed code is now provided. All magic number and fake data are put at (almost) the top of the code so it's easy to convert it into a general purpose Matlab function. Good luck!
% I have adjusted the range values to show the curved cylinder wall
% display a variable temperature
r = 0:0.1:2.6; % you can also try r = 0:0.1:3.0
z = 0:0.1:10; % you can also try z = 0:0.1:15;
[rr, zz] = meshgrid(r,z);
% fake temperature data
temp = 100 + (10* (3-rr).^0.6) .* (1-((zz - 7.5)/7.5).^6) ;
% visualize in 2D
figure(1);
clf;
imagesc(r,z,temp);
colorbar;
% set cut planes angles
theta1 = 0;
theta2 = pi*135/180;
nt = 40; % angle resolution
figure(2);
clf;
xx1 = rr * cos(theta1);
yy1 = rr * sin(theta1);
h1 = surface(xx1,yy1,zz,temp,'EdgeColor', 'none');
xx2 = rr * cos(theta2);
yy2 = rr * sin(theta2);
h2 = surface(xx2,yy2,zz,temp,'EdgeColor', 'none');
% polar meshgrid for the top end-cap
t3 = linspace(theta1, (theta2 - 2*pi), nt);
[rr3, tt3] = meshgrid(r,t3);
xx3 = rr3 .* cos(tt3);
yy3 = rr3 .* sin(tt3);
zz3 = ones(size(rr3)) * max(z);
temp3 = zeros(size(rr3));
for k = 1:length(r)
temp3(:,k) = temp(end,k);
end
h3 = surface(xx3,yy3,zz3,temp3,'EdgeColor', 'none');
% polar meshgrid for the bottom end-cap
zz4 = ones(size(rr3)) * min(z);
temp4 = zeros(size(rr3));
for k = 1:length(r)
temp4(:,k) = temp(1,k);
end
h4 = surface(xx3,yy3,zz4,temp4,'EdgeColor', 'none');
% generate a curved meshgrid
[tt5, zz5] = meshgrid(t3,z);
xx5 = r(end) * cos(tt5);
yy5 = r(end) * sin(tt5);
temp5 = zeros(size(xx5));
for k = 1:length(z)
temp5(k,:) = temp(k,end);
end
h5 = surface(xx5, yy5, zz5,temp5,'EdgeColor', 'none');
axis equal
colorbar
view(125,25); % viewing angles
I have about four series of data on a Matlab plot, two of them are quite close and can only be differentiated with a zoom. How do I depict the zoomed part within the existing plot for the viewer. I have checked similar posts but the answers seem very unclear.
I look for something like this:
Here is a suggestion how to do this with MATLAB. It may need some fine tuning, but it will give you the result:
function pan = zoomin(ax,areaToMagnify,panPosition)
% AX is a handle to the axes to magnify
% AREATOMAGNIFY is the area to magnify, given by a 4-element vector that defines the
% lower-left and upper-right corners of a rectangle [x1 y1 x2 y2]
% PANPOSTION is the position of the magnifying pan in the figure, defined by
% the normalized units of the figure [x y w h]
%
fig = ax.Parent;
pan = copyobj(ax,fig);
pan.Position = panPosition;
pan.XLim = areaToMagnify([1 3]);
pan.YLim = areaToMagnify([2 4]);
pan.XTick = [];
pan.YTick = [];
rectangle(ax,'Position',...
[areaToMagnify(1:2) areaToMagnify(3:4)-areaToMagnify(1:2)])
xy = ax2annot(ax,areaToMagnify([1 4;3 2]));
annotation(fig,'line',[xy(1,1) panPosition(1)],...
[xy(1,2) panPosition(2)+panPosition(4)],'Color','k')
annotation(fig,'line',[xy(2,1) panPosition(1)+panPosition(3)],...
[xy(2,2) panPosition(2)],'Color','k')
end
function anxy = ax2annot(ax,xy)
% This function converts the axis unites to the figure normalized unites
% AX is a handle to the figure
% XY is a n-by-2 matrix, where the first column is the x values and the
% second is the y values
% ANXY is a matrix in the same size of XY, but with all the values
% converted to normalized units
pos = ax.Position;
% white area * ((value - axis min) / axis length) + gray area
normx = pos(3)*((xy(:,1)-ax.XLim(1))./range(ax.XLim))+ pos(1);
normy = pos(4)*((xy(:,2)-ax.YLim(1))./range(ax.YLim))+ pos(2);
anxy = [normx normy];
end
Note that the units of areaToMagnify are like the axis units, while the units of panPosition are between 0 to 1, like the position property in MATLAB.
Here is an example:
x = -5:0.1:5;
subplot(3,3,[4 5 7 8])
plot(x,cos(x-2),x,sin(x),x,-x-0.5,x,0.1.*x+0.1)
ax = gca;
area = [-0.4 -0.4 0.25 0.25];
inlarge = subplot(3,3,3);
panpos = inlarge.Position;
delete(inlarge);
inlarge = zoomin(ax,area,panpos);
title(inlarge,'Zoom in')