[ 2% 247/11700] target SharedLib: lib...libart_intermediates/LINKED/libart.so)
FAILED: /bin/bash -c "prebuilts/clang/host/linux-x86/clang-2690385/bin/clang++ -nostdlib -Wl,-soname,libart.so -Wl,--gc-sections -shared -Lout/target/product/generic/obj/lib out/target/product/generic/obj/lib/crtbegin_so.o out/target/product/generic/obj/SHARED_LIBRARIES/libart_intermediates/interpreter/mterp/out/mterp_arm.o
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/arm-linux-androideabi/bin/ld: error: out/target/product/generic/obj/SHARED_LIBRARIES/libart_intermediates/type_lookup_table.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/arm-linux-androideabi/bin/ld: error: out/target/product/generic/obj/SHARED_LIBRARIES/libart_intermediates/verifier/instruction_flags.o: file is empty
art/runtime/base/scoped_flock.cc:37: error: undefined reference to 'art::OS::OpenFileWithFlags(char const*, int)'
art/runtime/check_jni.cc:3240: error: undefined reference to 'art::operator<<(std::__1::basic_ostream >&, art::Primitive::Type const&)'
art/runtime/check_jni.cc:3056: error: undefined reference to 'art::operator<<(std::__1::basic_ostream >&,
art/runtime/class_linker.cc:2166: error: undefined reference to 'art::ObjectLock::ObjectLock(art::Thread*, art::Handle)'
art/runtime/class_linker.cc:2169: error: undefined reference to 'art::ObjectLock::WaitIgnoringInterrupts()'
clang++: error: linker command failed with exit code 1 (use -v to see invocation)
[ 2% 247/11700] Building with Jack: o...t_intermediates/with-local/classes.dex
ninja: build stopped: subcommand failed.
build/core/ninja.mk:148: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make failed to build some targets (06:55 (mm:ss))
Getting this error when i run make -j16
Help me what to do !
Seems like some of your object files have been corrupted. I suggest you either clean the dir out/target/product/generic/obj/SHARED_LIBRARIES/libart_intermediates or/and clean ccache ccache -C
First advice is not to build with make -j16 as it takes too much ram.
For example compiling on 8 cores needs 64 GB of ram (tested on my server)
Try just compiling on a single core or at most on two. Another solution would be to call the command m instead of make to let it automatically find optimal settings on your hardware.
Another thing could be that you are missing some packages. Are you sure these packages are installed?
git-core gnupg flex bison build-essential zip curl zlib1g-dev gcc-multilib g++-multilib libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z1-dev libgl1-mesa-dev libxml2-utils xsltproc unzip fontconfig
They could have different names for your distro (for example if you use Arch).
Also to note:
Compiling should take between 2.5 to 4 hours depending on your cpu performance. - It needs 100GB for downloading the android sources and 100-150GB for compilation.
You also need at least 12 GB or more to compile on a single core.
There is some method to compile it on 8GB of RAM by using swap space but this is extremely slow so not recommended.
My personal hardware and times:
Intel xeon e5-2680v3 8 core cpu
40 GB ram
Compile time on make -j1: 2 hours
Related
I am building Yocto for AGL image (for more details: automotivelinux.org).
The below error occurred during the build progress (do_rootfs).
In packagegroup-agl-demo-platform.bb, declared packagegroup-agl-image-ivi as a runtime dependent package.
RDEPENDS_${PN} += "\
packagegroup-agl-image-ivi \
"
I can build successfully the packagegroup-agl-image-ivi separately. But when building the whole agl-demo-platform image, happened as follows:
ERROR: agl-demo-platform-1.0-r0 do_rootfs: Unable to install packages. Command '/LTSI4.9/LTSI4.4/build/tmp/work/m3ulcb-agl-linux/agl-demo-platform/1.0-r0/opkg.conf -t /LTSI4.9/build/tmp/work/m3ulcb-agl-linux/agl-demo-platform/1.0-r0/temp/ipktemp/ -o /LTSI4.9/build/tmp/work/m3ulcb-agl-linux/agl-demo-platform/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version install
run-postinsts
screen
kernel-modules
packagegroup-agl-devel
packagegroup-core-eclipse-debug
mc packagegroup-core-tools-profile
kernel-module-vsp2 kernel-module-pvrsrvkm
kernel-module-vspm-if
opkg packagegroup-core-tools-debug
psplash kernel-module-vspm
packagegroup-core-ssh-openssh
packagegroup-agl-demo-platform
omx-user-module kernel-devicetree'
returned 1:
Solver encountered 1 problem(s):
Problem 1/1:
- package packagegroup-agl-demo-platform-1.0-r0.all requires packagegroup-agl-image-ivi, but none of the providers can be installed
Solution 1:
- do not ask to install a package providing packagegroup-agl-demo-platform
ERROR: agl-demo-platform-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /LTSI4.9/build/tmp/work/m3ulcb-agl-linux/agl-demo-platform/1.0-r0/temp/log.do_rootfs.14498
ERROR: Task (/LTSI4.9/meta-agl-demo/recipes-platform/images/agl-demo-platform.bb:do_rootfs) failed with exit code '1'
Can anyone help me out in this case ?
I tried 02 ways as follows. They did work.
First method, I cleaned all relative packages and rebuild the whole image.
$ bitbake -c cleanall -c cleansstate <recipes>
recipes consisted of all dependent & runtime dependent packages. But it was a little bit confused to inexperienced users to determine which ones.
Second method, I wiped out the build/tmp/, cache/, sstate-cache/ folders, and re-build all Yocto packages.
There were nothing happening any more. It was really a bad idea if be in critical period of time, but if have free time, be helpful.
Trying to build Linux for Advantech UBC-221 that has Intel Quark processor.
The system is Debian 9, running on VMware. Was able to build poky succefully before.
Let me summarize what I was doing:
mkdir quark
cd quark
git clone git://git.yoctoproject.org/meta-intel-quark
git clone git://git.openembedded.org/openembedded-core
git clone git://git.yoctoproject.org/poky
cp -r poky/bitbake .
cd openembedded-core
source oe-init-build-env
bitbake-layers add-layer ~/quark/meta-intel-quark/
bitbake core-image-base
Error code I get:
WARNING: Layer quark-bsp should set LAYERSERIES_COMPAT_quark-bsp in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: Layer quark-bsp should set LAYERSERIES_COMPAT_quark-bsp in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: /home/bgabor/quark/meta-intel-quark/recipes-kernel/linux/linux-yocto-quark_3.8.bb: Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
WARNING: /home/bgabor/quark/meta-intel-quark/recipes-bsp/grub/grub_0.97.bb: Exception during build_dependencies for CFLAGS
WARNING: /home/bgabor/quark/meta-intel-quark/recipes-bsp/grub/grub_0.97.bb: Error during finalise of /home/bgabor/quark/meta-intel-quark/recipes-bsp/grub/grub_0.97.bb
ERROR: ExpansionError during parsing /home/bgabor/quark/meta-intel-quark/recipes-bsp/grub/grub_0.97.bb
Traceback (most recent call last):
bb.data_smart.ExpansionError: Failure expanding variable CFLAGS, expression was -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/bgabor/quark/openembedded-core/build/tmp-glibc/work/i586-oe-linux/grub/0.97+gitAUTOINC+5775f32a62-r0=/usr/src/debug/grub/0.97+gitAUTOINC+5775f32a62-r0 -fdebug-prefix-map=/home/bgabor/quark/openembedded-core/build/tmp-glibc/work/i586-oe-linux/grub/0.97+gitAUTOINC+5775f32a62-r0/recipe-sysroot= -fdebug-prefix-map=/home/bgabor/quark/openembedded-core/build/tmp-glibc/work/i586-oe-linux/grub/0.97+gitAUTOINC+5775f32a62-r0/recipe-sysroot-native= -Os -fno-strict-aliasing -Wall -Werror -Wno-shadow -Wno-unused -Wno-pointer-sign -DINTEL_QUARK_TEST=${#base_contains('PACKAGECONFIG', 'grub_test', '1', '0', d)} which triggered exception NameError: name 'base_contains' is not defined
Summary: There were 5 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
I'm pretty much stuck here. Some help would be greatly appreciated!
Edit:
Tried to build on Debian 7.11 32 bit system. It went better however another error came:
bgabor#debian:~/quark/dizzy/build$ bitbake core-image-base
WARNING: Host distribution "Debian-7.11" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution.
Loading cache: 100% |####################################################################################################################################################| ETA: 00:00:00
Loaded 1292 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.24.0"
BUILD_SYS = "i686-linux"
NATIVELSBSTRING = "Debian-7.11"
TARGET_SYS = "i586-poky-linux"
MACHINE = "quark"
DISTRO = "poky"
DISTRO_VERSION = "1.7.3"
TUNE_FEATURES = "m32 i586"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "dizzy:58863ad092c9a279e305c841dbb4353de2ecfae8"
meta-intel-quark = "master:a314f0ceea986fde42d5d9b0ea449f7a563e9351"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Unable to install packages. Command '/home/bgabor/quark/dizzy/build/tmp/sysroots/i686-linux/usr/bin/smart --quiet --data-dir=/home/bgabor/quark/dizzy/build/tmp/work/quark-poky-linux/core-image-minimal-initramfs/1.0-r0/rootfs/var/lib/smart install -y busybox#i586 initramfs-live-install-efi#i586 run-postinsts#all initramfs-live-install#i586 udev#i586 initramfs-live-boot#quark base-passwd#i586' returned 1:
error: Can't install initramfs-live-install-1.0-r9#i586: no package provides grub
ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/bgabor/quark/dizzy/build/tmp/work/quark-poky-linux/core-image-minimal-initramfs/1.0-r0/temp/log.do_rootfs.29435
ERROR: Task 240 (/home/bgabor/quark/dizzy/meta/recipes-core/images/core-image-minimal-initramfs.bb, do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2529 tasks of which 2527 didn't need to be rerun and 1 failed.
No currently running tasks (2435 of 2531)
Summary: 1 task failed:
/home/bgabor/quark/dizzy/meta/recipes-core/images/core-image-minimal-initramfs.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
It does not find grub package, however I can see there are two in the recipes:
bgabor#debian:~/quark/dizzy/build$ bitbake-layers show-recipes | grep "grub" -A 3
Parsing recipes..done.
grub:
meta-intel-quark 0.97+gitAUTOINC+5775f32a62
meta 0.97
meta 2.00
--
grub-conf:
meta-intel-quark 1.0
grub-efi:
meta 2.00
gsettings-desktop-schemas:
meta 3.10.1
Tried to clean and then bitbake again but no result.
What might be the problem here?
First, Poky includes OpenEmbedded Core so you don't need to clone both, just clone Poky.
Second, the meta-intel-iot layer is pretty dead and only formally supports the Daisy release of Poky (see the README). You may have luck using newer releases, but obviously not git master (aka Thud).
https://wiki.yoctoproject.org/wiki/Releases lists the releases. Instead of checking out master of Poky, check out the relevant release branch. I suggest starting with daisy but trying something a little newer such as jethro would be a good idea.
this is a bit of a long shot but:
I'm following this guide: https://www.tutorialspoint.com/postgresql/postgresql_c_cpp.htm
But when running ./configure I get the following error:
(previous checking lines omitted for brevity)
checking for main in -lpq... yes
checking for PQexec in -lpq... yes
checking for correct C++ linkage of basic libpq functions...
sed: character class syntax is [[:space:]], not [:space:]
configure: error:
Linking a call to libpq failed in C++, even though it succeeded in C. If your
C and C++ compilers are very different beasts, this may mean that we do not have
the right options for linking with it after all.
Read the config.log file for more detailed information. Look for the last error
message, which may be several pages up from the end of the file.
And the configure.log file looks like this:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libpqxx configure 4.0, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
(some lines omitted)
configure:3039: g++ -V >&5
g++: error: unrecognized command line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:3050: $? = 1
configure:3039: g++ -qversion >&5
g++: error: unrecognized command line option '-qversion'; did you mean '--version'?
g++: fatal error: no input files
compilation terminated.
(some lines omitted)
configure:7629: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
(some lines omitted)
configure:8319: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C
(some lines omitted)
configure:16424: g++ -o conftest -g -O2 -L/usr/lib/x86_64-linux-gnu conftest.cpp >&5
/tmp/ccfFBf4K.o: In function `main':
/home/peter/libpqxx-4.0/conftest.cpp:44: undefined reference to `PQexec'
collect2: error: ld returned 1 exit status
(some liens omitted)
I don't believe I have any packages missing. I have the newest version of g++, psql and libpqxx installed.
I have updated and upgraded all packages on my system.
I have crawled the web for solutions to this error, but I have no clue what is wrong.
Do you have an idea where I can go from here?
There hasn't been a tarball release of libpqxx at the old spot in a long time, so the tutorial you used with its wget command to download the tarball is very outdated.
The issue you encountered looks related to this issue and appears to have been fixed in this commit:
commit 85e9336740475be25ed19924cca0961f7d844c4b
Author: Jeroen Vermeulen <jtvjtv#gmail.com>
Date: Thu Jun 1 11:39:08 2017 +0700
Fix #13: not linking to libpq.
This was that annoying interaction between autoconf, m4, GNU sed syntax,
and the shell which broke the "remove redundant -lpq options" code in
the configure script.
Solution: forget about GNU sed's "[[:space:]]" syntax, and just look for
a literal space. There aren't going to be any tabs, newlines,
non-breaking spaces, etc. there in even a moderately sane world.
Hi I use fedora23 to calculate matrix.
So I am trying to install CLAPACK-3.2.1 to my computer.
In the procedure,
1. download clapack.tgz (version 3.2.1) from www.netlib.org/clapack -> done
2. cd CLAPACK-3.2.1 and cp make.inc.example make.inc -> done
3. make f2clib -> done properly
4. make blaslib -> done properly
5. make (this takes a while) -> problem starts here.
in a procedure of make, there are two errors. The error message is this.
make[2]: Leaving directory '/home/optics/CLAPACK/TESTING/EIG'
NEP: Testing Nonsymmetric Eigenvalue Problem routines
./xeigtstz < nep.in > znep.out 2>&1
/bin/sh: line 1: 9412 Segmentation fault (core dumped) ./xeigtstz < nep.in > znep.out 2>&1
Makefile:438: recipe for target 'znep.out' failed
make[1]: *** [znep.out] Error 139
make[1]: Leaving directory '/home/optics/CLAPACK/TESTING'
Makefile:44: recipe for target 'lapack_testing' failed
make: *** [lapack_testing] Error 2
==============================================================================
I cannot understand this. Please help me dealing with these errors.
I have also encountered this problem and was able to resolve it by increasing the stack size using ulimit as suggested here. The following worked for me:
$ sudo ulimit -s 100000
Followed by running make as usual. If you would like a primer on what this command does, check out this question: What does “ulimit -s unlimited” do?. Basically, it increases the limits on the scratch space in memory allocated to a thread.
In Kubuntu 17.10 it worked in this way:
ulimit -s unlimited
What should I change in order to install the module? php is 5.3.3 withyum install php-devel in place.
PHP.c: In function ‘PHP_set_php_input’:
PHP.c:818: warning: passing argument 2 of ‘Perl_sv_2pv_flags’ from incompatible pointer type
/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/proto.h:3931: note: expected ‘STRLEN * const’ but argument is of type ‘int *’
cc -c -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -Wall -O2 -DVERSION=\"0.15\" -DXS_VERSION=\"0.15\" -fPIC "-I/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE" array.c
In file included from /usr/include/php/main/php.h:33,
from /usr/include/php/sapi/embed/php_embed.h:23,
from PHP.h:14,
from array.c:9:
/usr/include/php/main/php_config.h:2417:1: warning: "_GNU_SOURCE" redefined
In file included from /home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/perl.h:28,
from PHP.h:9,
from array.c:9:
/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/config.h:1825:1: warning: this is the location of the previous definition
rm -f blib/arch/auto/PHP/PHP.so
cc -shared -O2 -L/usr/local/lib -fstack-protector PHP.o array.o -o blib/arch/auto/PHP/PHP.so \
\
chmod 755 blib/arch/auto/PHP/PHP.so
"/home/mpapec/.plenv/versions/5.20.0/bin/perl5.20.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- PHP.bs blib/arch/auto/PHP/PHP.bs 644
Manifying 1 pod document
Running Mkbootstrap for PHP ()
chmod 644 "PHP.bs"
PERL_DL_NONLAZY=1 "/home/mpapec/.plenv/versions/5.20.0/bin/perl5.20.0" "-Iblib/lib" "-Iblib/arch" test.pl
1..79
not ok 1 - use_ok PHP
# Failed test 'use_ok PHP'
# at test.pl line 11.
not ok 2 - require PHP;
# Failed test 'require PHP;'
# at test.pl line 18.
# Tried to require 'PHP'.
# Error: Attempt to reload PHP.pm aborted.
# Compilation failed in require at (eval 6) line 2.
not ok 3 - eval
# Failed test 'eval'
# at test.pl line 49.
Module PHP failed to load at blib/lib/PHP.pm line 80.
Module PHP failed to load at blib/lib/PHP.pm line 80.
END failed--call queue aborted at test.pl line 50.
# Looks like you planned 79 tests but ran 3.
# Looks like you failed 3 tests of 3 run.
# Looks like your test exited with 22 just after 3.
make: *** [test_dynamic] Error 22
-> FAIL Installing PHP failed. See /home/mpapec/.cpanm/work/1440522239.12833/build.log for details. Retry with --force to force install it.
(
PHP is kind of fragile. It probably won't work out of the box with your system php installation, and may have trouble with 64-bit or multi-threaded versions of perl.
I have only ever gotten it to work on Linux. The latest version I have tried to use is 5.3.8 (back in 2013), though I remember things going smoothly from 5.2.x to 5.3.8.
I always build php from source, with this configuration:
./configure --enable-embed --with-zlib --with-openssl --with-mysql \
--with-libdir=lib/i386-linux-gnu
--enable-embed is absolutely required, as the pod mentions, to build a PHP interpreter with the SAPI extension, and which then allows perl to manipulate the PHP interpreter through XS code. The other extensions were for other requirements of my project; they may be optional, but I haven't experimented with building the PHP interpreter or the PHP module with any other configuration. The pod also says to never use the --with-apxs argument, which I was never tempted to do anyway.
The build process of the PHP module will look for and require a program called php-config. You may need to hack your $PATH, if only during the build process, so that the PHP module runs the correct php-config. After that the module will know where to look for the rest of your php installation.
I had fun working with this module for a while (writing a Catalyst and then a Mojolicious wrapper around WordPress), but it has fallen into disrepair and disrepute. Share whatever you learn trying to build it and we'll put it in the docs, making this module that much easier to use.