I created a function that retrieves data from multiple table and insert the result into a new table. I am passing few dates in the where clause to filter the applicable information. The dates are in timestamptz format. The query takes roughly a min to process. However when I make the change in the where clause to pass the date from another table, the query lags a lot. i.e.
My initial argument that doesn't lag is
where timestamp = '2022-01-05 04:00:00+00'
The lag is when I change this where clause to pass this date from another table.
where timestamp = select date_time from table_Test
The date_time in table_test is defined as timestamptz and the value is '2022-01-05 04:00:00+00'.
Any idea why the query lags when I pass the date argument from another table?
Thanks,
I have been using postgreSQL. My table has 3 columns date, time and userId. I have to find out records between the given date and time frame. Since date and time columns are different, 'BETWEEN' clause is not providing valid results
Combine the two columns into a single timestamp by adding the time to the date:
select *
from some_table
where date_column + time_column
between timestamp '2017-06-14 17:30:00' and timestamp '2017-06-19 08:26:00';
Note that this will not use an index on date_column or time_column. You would need to create an index on that expression. Or better: use a single column defined as timestamp instead.
Image I have a table containing the following two columns:
timestampwithouttimezone (of type TIMESTAMP WITHOUT TIME ZONE)
utcoffset (of type INTEGER)
I want to convert those two column to a single one of type TIMESTAMP WITH TIME ZONE. Can this be achieved using a ALTER TABLE ALTER COLUMN [column] SET DATE TYPE TIMESTAMP WITH TIME ZONE query and the additional USING clause?
Or do I need a separate UPDATE query that takes the offset and sets the timezone of the timestamps? If that's the case, what would that query be? I can't find any examples that show how to update the timezone using an integer.
You could do that like this, assuming the offset is in hours:
ALTER TABLE mytab
ALTER timestampwithouttimezone
TYPE timestamp with time zone
USING CAST (timestampwithouttimezone::text || ' '
|| to_char(utcoffset, 'S00FM')
AS timestamp with time zone),
DROP utcoffset;
I have created a table with a column date_time type (varchar2 (40) ) but when i try to insert the current system date and time the doesnt work it gives error (too many values). please tell me what's wrong with the insert statement.
create table HR (type varchar2 (20), raised_by number (6), complaint varchar2 (500), date_time varchar2(40))
insert into HR values ('request',6785,'good morning',sysdate,'YYYY/MM/DD:HH:MI:SSAM')
The immediate cause of the error is that you have too many values, as the message says; that is, more elements in your values clause than there are columns. It is better to explicitly list the column names to avoid future problems and confusion, so you're really doing this:
insert into HR (type, raised_by, complaint, date_time)
values ('request',6785,'good morning',sysdate,'YYYY/MM/DD:HH:MI:SSAM')
... sp you have four columns, but five values. You're trying to insert the current date/time as a string so you would need to use the to_char() function:
insert into HR (type, raised_by, complaint, date_time)
values ('request',6785,'good morning',
to_char(sysdate,'YYYY/MM/DD:HH:MI:SSAM'))
But it is bad practice to store a date (or any other structured data, such as a number) as a string. As the documentation notes:
Each value manipulated by Oracle Database has a data type. The data
type of a value associates a fixed set of properties with the value.
These properties cause Oracle to treat values of one data type
differently from values of another. For example, you can add values of
NUMBER data type, but not values of RAW data type.
If you use a string then you can put invalid values in. If you use a proper DATE data type then you cannot accidentally put an invalid or confusing value in. Oracle will also be able to optimise the use of the column, and will be able to compare values safely and efficiently. Although the format you're using is better than some, using string comparison you still can't easily compare two values to see which is earlier, so you can't properly order by the date_time column for example.
Say you inserted two rows with values 2013/11/15:09:00:00AM and 2013/11/15:08:00:00PM - which is earlier? You need to look at the AM/PM marker to realise the first one is earlier; with a string comparison you'd get it wrong because 8 would be sorted before 9. Using HH24 instead of HH and AM avoids that, but would still be less efficient than a true date.
If you need to store a date with a time component you can use the DATE data type, which has precision down to the second; or if you need fractional seconds too then you can use TIMESTAMP. Then your table and insert would be:
create table HR (type varchar2 (20), raised_by number (6),
complaint varchar2 (500), date_time date);
insert into HR (type, raised_by, complaint, date_time)
values ('request',6785,'good morning',sysdate);
You can still get the value in the format you wanted for display purposes as part of a query:
select type, raised_by, complaint,
to_char(date_time, 'YYYY/MM/DD:HH:MI:SSAM') as date_time
from HR
order by date_time;
TYPE RAISED_BY COMPLAINT DATE_TIME
-------------------- ---------- -------------------- ---------------------
request 6785 good morning 2013/11/15:08:44:35AM
Only treat a date as a string for display.
You can use TO_DATE() or TO_TIMESTAMP or To_char() function,
insert into HR values ('request',6785,'good morning',TO_DATE(sysdate, 'yyyy/mm/dd hh24:mi:ss'))
insert into HR values ('request',6785,'good morning',TO_TIMESTAMP(systimestamp, 'yyyy/mm/dd hh24:mi:ss'))
sysdate - It will give date with time.
systimestamp - It will give datetime with milliseconds.
To_date() - Used to convert string to date.
To_char() - Used to convert date to string.
Probably here you have to use To_char() because your table definition have varchar type for date_time column.
Use TIMESTAMP datatype for date_time. And while inserting use the current timestamp.
create table HR (type varchar2(20), raised_by number(6), complaint varchar2(500), date_time timestamp);
insert into HR values ('request',6785,'good morning', systimestamp);
For other options: http://psoug.org/reference/timestamp.html
I want to insert date and time in oracle database, I have created the table with columns
create table myadmin
( employe_id number(5),
supervisor Varchar2(20),
department Varchar2(20),
action Varchar2(20),
sdate date,
stime date)
While inserting the values below it gives an error. Please tell me how to insert the time ?
insert into myadmin
( employe_id,supervisor,department,action,sdate,stime) values
(83,'gaurav','helpdesk','pick','23-jan-2013','09:43:00');
You have to use keyword to_date for date insert in oracle like this.
to_date('23-01-2013','dd-mm-yyyy')
Basically you have to use keyword to_date('your date','your date format').
You can also add date and time together if you want and it would be something like this
to_date('23-01-2013 09:43:00','dd-mm-yyyy hh24:mi:ss')
A date in Oracle always has a date part and a time part. Having date and time in two separate columns only makes sense, if it can occur that date is null and time is not. (And still, you could set date to an improbable value like 1.1.0001 then.)
However, if you want to stick to those two separate fields, then make your string a datetime with the to_date function specifying the format used:
insert into myadmin
( employe_id,supervisor,department,action,sdate,stime) values
(83,'gaurav','helpdesk','pick',to_date('23-01-2013','dd-mm-yyyy'), to_date('09:43:00', 'hh24:mi:ss'));