Every programming language has their own interpretation of \n and \r.
Unicode supports multiple characters that can represent a new line.
From the Rust reference:
A whitespace escape is one of the characters U+006E (n), U+0072 (r),
or U+0074 (t), denoting the Unicode values U+000A (LF), U+000D (CR) or
U+0009 (HT) respectively.
Based on that statement, I'd say a Rust character is a new-line character if it is either \n or \r. On Windows it might be the combination of \r and \n. I'm not sure though.
What about the following?
Next line character (U+0085)
Line separator character (U+2028)
Paragraph separator character (U+2029)
In my opinion, we are missing something like a char.is_new_line().
I looked through the Unicode Character Categories but couldn't find a definition for new-lines.
Do I have to come up with my own definition of what a Unicode new-line character is?
There is considerable practical disagreement between languages like Java, Python, Go and JavaScript as to what constitutes a newline-character and how that translates to "new lines". The disagreement is demonstrated by how the batteries-included regex engines treat patterns like $ against a string like \r\r\n\n in multi-line-mode: Are there two lines (\r\r\n, \n), three lines (\r, \r\n, \n, like Unicode says) or four (\r, \r, \n, \n, like JS sees it)? Go and Python do not treat \r\n as a single $ and neither does Rust's regex crate; Java's does however. I don't know of any language whose batteries extend newline-handling to any more Unicode characters.
So the takeaway here is
It is agreed upon that \n is a newline
\r\n may be a single newline
unless \r\n is treated as two newlines
unless \r\n is "some character followed by a newline"
You shall not have any more newlines beside that.
If you really need more Unicode characters to be treated as newlines, you'll have to define a function that does that for you. Don't expect real-world input that expects that. After all, we had the ASCII Record separator for a gazillion years and everybody uses \t instead as well.
Update: See http://www.unicode.org/reports/tr14/tr14-32.html#BreakingRules section LB5 for why \r\r\n should be treated as two line breaks. You could read the whole page to get a grip on how your original question would have to be implemented. My guess is by the point you reach "South East Asian: line breaks require morphological analysis" you'll close the tab :-)
The newline character is declared as 0xA from this documentation
Sample: Rust Playground
// c is our `char`
if c == 0xA as char {
println!("got a newline character")
}
Related
I found a code with regex where it is claimed that it strips the text of any non-ASCII characters.
The code is written in Perl and the part of code that does it is:
$sentence =~ tr/\000-\011\013-\014\016-\037\041-\055\173-\377//d;
I want to understand how this regex works and in order to do this I have used regexr. I found out that \000, \011, \013, \014, \016, \037, \041, \055, \173, \377 mean separate characters as NULL, TAB, VERTICAL TAB ... But I still do not get why "-" symbols are used in the regex. Do they really mean "dash symbol" as shown in regexr or something else? Is this regex really suited for deleting non-ASCII characters?
This isn't really a regex. The dash indicates a character range, like inside a regex character class [a-z].
The expression deletes some ASCII characters, too (mainly whitespace) and spares a range of characters which are not ASCII; the full ASCII range would simply be \000-\177.
To be explicit, the d flag says to delete any characters not between the first pair of slashes. See further the documentation.
Can anybody please tell me what is the range of Unicode printable characters? [e.g. Ascii printable character range is \u0020 - \u007f]
See, http://en.wikipedia.org/wiki/Unicode_control_characters
You might want to look especially at C0 and C1 control character http://en.wikipedia.org/wiki/C0_and_C1_control_codes
The wiki says, the C0 control character is in the range U+0000—U+001F and U+007F (which is the same range as ASCII) and C1 control character is in the range U+0080—U+009F
other than C-control character, Unicode also has hundreds of formatting control characters, e.g. zero-width non-joiner, which makes character spacing closer, or bidirectional text control. This formatting control characters are rather scattered.
More importantly, what are you doing that requires you to know Unicode's non-printable characters? More likely than not, whatever you're trying to do is the wrong approach to solve your problem.
This is an old question, but it is still valid and I think there is more to usefully, but briefly, say on the subject than is covered by existing answers.
Unicode
Unicode defines properties for characters.
One of these properties is "General Category" which has Major classes and subclasses. The Major classes are Letter, Mark, Punctuation, Symbol, Separator, and Other.
By knowing the properties of your characters, you can decide whether you consider them printable in your particular context.
You must always remember that terms like "character" and "printable" are often difficult and have interesting edge-cases.
Programming Language support
Some programming languages assist with this problem.
For example, the Go language has a "unicode" package which provides many useful Unicode-related functions including these two:
func IsGraphic(r rune) bool
IsGraphic reports whether the rune is defined as a Graphic by Unicode. Such
characters include letters, marks, numbers, punctuation, symbols, and spaces,
from categories L, M, N, P, S, Zs.
func IsPrint(r rune) bool
IsPrint reports whether the rune is defined as printable by Go. Such
characters include letters, marks, numbers, punctuation, symbols, and
the ASCII space character, from categories L, M, N, P, S and the ASCII
space character. This categorization is the same as IsGraphic except
that the only spacing character is ASCII space, U+0020.
Notice that it says "defined as printable by Go" not by "defined as printable by Unicode". It is almost as if there are some depths the wizards at Unicode dare not plumb.
Printable
The more you learn about Unicode, the more you realise how unexpectedly diverse and unfathomably weird human writing systems are.
In particular whether a particular "character" is printable is not always obvious.
Is a zero-width space printable? When is a hyphenation point printable? Are there characters whose printability depends on their position in a word or on what characters are adjacent to them? Is a combining-character always printable?
Footnotes
ASCII printable character range is \u0020 - \u007f
No it isn't. \u007f is DEL which is not normally considered a printable character. It is, for example, associated with the keyboard key labelled "DEL" whose earliest purpose was to command the deletion of a character from some medium (display, file etc).
In fact many 8-bit character sets have many non-consecutive ranges which are non-printable. See for example C0 and C1 controls.
First, you should remove the word 'UTF8' in your question, it's not pertinent (UTF8 is just one of the encodings of Unicode, it's something orthogonal to your question).
Second: the meaning of "printable/non printable" is less clear in Unicode. Perhaps you mean a "graphical character" ; and one can even dispute if a space is printable/graphical. The non-graphical characters would consist, basically, of control characters: the range 0x00-0x0f plus some others that are scattered.
Anyway, the vast majority of Unicode characters (more than 200.000) are "graphical". But this certainly does not imply that they are printable in your environment.
It seems to me a bad idea, if you intend to generate a "random printable" unicode string, to try to include all "printable" characters.
What you should do is pick a font, and then generate a list of which Unicode characters have glyphs defined for your font. You can use a font library like freetype to test glyphs (test for FT_Get_Char_Index(...) != 0).
Taking the opposite approach to #HoldOffHunger, it might be easier to list the ranges of non-printable characters, and use not to test if a character is printable.
In the style of Regex (so if you wanted printable characters, place a ^):
[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF]
Which accounts for things like separator spaces and joiners
Note that unlike their answer which is a whitelist that ignores all non-latin languages, this blacklist wont permit non-printable characters just because they're in blocks with printable characters (their answer wholly includes Non-Latin, Language Supplement blocks as 'printable', even though it contains things like 'zero-width non-joiner'..).
Be aware though, that if using this or any other solution, for sanitation for example, you may want to do something more nuanced than a blanket replace.
Arguably in that case, non-breaking spaces should change to space, not be removed, and invisible separator should be replaced with comma conditionally.
Then there's invalid character ranges, either [yet] unused or reserved for encoding purposes, and language-specific variation selectors..
NB when using regular expressions, that you enable unicode awareness if it isn't that way by default (for javascript it's via /.../u).
You can tell if you have it correct by attempting to create the regular expression with some multi-byte character ranges.
For example, the above, plus the invalid character range \u{E0100}-\u{E01EF} in javascript:
/[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF\u{E0100}-\u{E01EF}]/u
Without u \u{E0100}-\u{E01EF} equates to \uDB40(\uDD00-\uDB40)\uDDEF, not (\uDB40\uDD00)-(\uDB40\uDDEF), and if replacing you should always enable u even when not including multbyte unicode in the regex itself as you might break surrogate pairs that exist in the text.
What characters are valid?
At present, Unicode is defined as starting from U+0000 and ending at U+10FFFF. The first block, Basic Latin, spans U+0000 to U+007F and the last block, Supplementary Private Use Area-B, spans U+100000 to 10FFFF. If you want to see all of these blocks, see here: Wikipedia.org: Unicode Block; List of Blocks.
Let's break down what's valid/invalid in the Latin Block1.
The Latin Block: TLDR
If you're interested in filtering out either invisible characters, you'll want to filter out:
U+0000 to U+0008: Control
U+000E to U+001F: Device (i.e., Control)
U+007F: Delete (Control)
U+008D to U+009F: Device (i.e., Control)
The Latin Block: Full Ranges
Here's the Latin block, broken up into smaller sections...
U+0000 to U+0008: Control
U+0009 to U+000C: Space
U+000E to U+001F: Device (i.e., Control)
U+0020: Space
U+0021 to U+002F: Symbols
U+0030 to U+0039: Numbers
U+003A to U+0040: Symbols
U+0041 to U+005A: Uppercase Letters
U+005B to U+0060: Symbols
U+0061 to U+007A: Lowercase Letters
U+007B to U+007E: Symbols
U+007F: Delete (Control)
U+0080 to U+008C: Latin1-Supplement symbols.
U+008D to U+009F: Device (i.e., Control)
U+00A0: Non-breaking space. (i.e., )
U+00A1 to U+00BF: Symbols.
U+00C0 to U+00FF: Accented characters.
The Other Blocks
Unicode is famous for supporting non-Latin character sets, so what are these other blocks? This is just a broad overview, see the wikipedia.org page for the full, complete list.
Latin1 & Latin1-Related Blocks
U+0000 to U+007F : Basic Latin
U+0080 to U+00FF : Latin-1 Supplement
U+0100 to U+017F : Latin Extended-A
U+0180 to U+024F : Latin Extended-B
Combinable blocks
U+0250 to U+036F: 3 Blocks.
Non-Latin, Language blocks
U+0370 to U+1C7F: 55 Blocks.
Non-Latin, Language Supplement blocks
U+1C80 to U+209F: 11 Blocks.
Symbol blocks
U+20A0 to U+2BFF: 22 Blocks.
Ancient Language blocks
U+2C00 to U+2C5F: 1 Block (Glagolitic).
Language Extensions blocks
U+2C60 to U+FFEF: 66 Blocks.
Special blocks
U+FFF0 to U+FFFF: 1 Block (Specials).
One approach is to render each character to a texture and manually check if it is visible. This solution excludes spaces.
I've written such a program and used it to determine there are roughly 467241 printable characters within the first 471859 code points. I've selected this number because it covers all of the first 4 Planes of Unicode, which seem to contain all printable characters. See https://en.wikipedia.org/wiki/Plane_(Unicode)
I would much like to refine my program to produce the list of ranges, but for now here's what I am working with for anyone who needs immediate answers:
https://editor.p5js.org/SamyBencherif/sketches/_OE8Y3kS9
I am posting this tool because I think this question attracts a lot of people who are looking for slightly different applications of knowing printable ranges. Hopefully this is useful, even though it does not fully answer the question.
The printable Unicode character range, excluding the hex, is 32 to 126 in the int datatype.
Unicode, stict term, has no range. Numbers can go infinite.
What you gave is not UTF8 which has 1 byte for ASCII characters.
As for the range, I believe there is no range of printable characters. It always evolves. Check the page I gave above.
how can i extract only the characters in a particular language from a file containing language characters, alphanumeric character english alphabets
This depends on a few factors:
Is the string encoded with UTF-8?
Do you want all non-English characters, including things like symbols and punctuation marks, or only non-symbol characters from written languages?
Do you want to capture characters that are non-English or non-Latin? What I mean is, would you want characters like é and ç or would you only want characters outside of Romantic and Germanic alphabets?
and finally,
What programming language are you wanting to do this in?
Assuming that you are using UTF-8, you don't want basic punctuation but are okay with other symbols, and that you don't want any standard Latin characters but would be okay with accented characters and the like, you could use a string regular expression function in whatever language you are using that searches for all non-Ascii characters. This would elimnate most of what you probably are trying to weed out.
In php it would be:
$string2 = preg_replace('/[^(\x00-\x7F)]*/','', $string1);
However, this would remove line endings, which you may or may not want.
I'm parsing an HTML document with a couple Perl modules: HTML::TreeBuilder and HTML::Element. For some reason whenever the content of a tag is just , which is to be expected, it gets returned by HTML::Element as a strange character I've never seen before:
alt text http://www.freeimagehosting.net/uploads/2acca201ab.jpg
I can't copy the character so can't Google it, couldn't find it in character map, and strangely when I search with a regular expression, \w finds it. When I convert the returned document to ANSI or UTF-8 it disappears altogether. I couldn't find any info on it in the HTML::Element documentation either.
How can I detect and replace this character with something more useful like null and how should I deal with strange characters like this in the future?
The character is "\xa0" (i.e. 160), which is the standard Unicode translation for . (That is, it's Unicode's non-breaking space.) You should be able to remove them with s/\xa0/ /g if you like.
The character is non-breaking space which is what stands for:
In word processing and digital typesetting, a non-breaking space (" ") (also called no-break space, non-breakable space (NBSP), hard space, or fixed space) is a space character that prevents an automatic line break at its position. In some formats, including HTML, it also prevents consecutive whitespace characters from collapsing into a single space.
In HTML, the common non-breaking space, which is the same width as the ordinary space character, is encoded as or . In Unicode, it is encoded as U+00A0.
How are \r and \n different? I think it has something to do with Unix vs. Windows vs. Mac, but I'm not sure exactly how they're different, and which to search for/match in regexes.
They're different characters. \r is carriage return, and \n is line feed.
On "old" printers, \r sent the print head back to the start of the line, and \n advanced the paper by one line. Both were therefore necessary to start printing on the next line.
Obviously that's somewhat irrelevant now, although depending on the console you may still be able to use \r to move to the start of the line and overwrite the existing text.
More importantly, Unix tends to use \n as a line separator; Windows tends to use \r\n as a line separator and Macs (up to OS 9) used to use \r as the line separator. (Mac OS X is Unix-y, so uses \n instead; there may be some compatibility situations where \r is used instead though.)
For more information, see the Wikipedia newline article.
EDIT: This is language-sensitive. In C# and Java, for example, \n always means Unicode U+000A, which is defined as line feed. In C and C++ the water is somewhat muddier, as the meaning is platform-specific. See comments for details.
In C and C++, \n is a concept, \r is a character, and \r\n is (almost always) a portability bug.
Think of an old teletype. The print head is positioned on some line and in some column. When you send a printable character to the teletype, it prints the character at the current position and moves the head to the next column. (This is conceptually the same as a typewriter, except that typewriters typically moved the paper with respect to the print head.)
When you wanted to finish the current line and start on the next line, you had to do two separate steps:
move the print head back to the beginning of the line, then
move it down to the next line.
ASCII encodes these actions as two distinct control characters:
\x0D (CR) moves the print head back to the beginning of the line. (Unicode encodes this as U+000D CARRIAGE RETURN.)
\x0A (LF) moves the print head down to the next line. (Unicode encodes this as U+000A LINE FEED.)
In the days of teletypes and early technology printers, people actually took advantage of the fact that these were two separate operations. By sending a CR without following it by a LF, you could print over the line you already printed. This allowed effects like accents, bold type, and underlining. Some systems overprinted several times to prevent passwords from being visible in hardcopy. On early serial CRT terminals, CR was one of the ways to control the cursor position in order to update text already on the screen.
But most of the time, you actually just wanted to go to the next line. Rather than requiring the pair of control characters, some systems allowed just one or the other. For example:
Unix variants (including modern versions of Mac) use just a LF character to indicate a newline.
Old (pre-OSX) Macintosh files used just a CR character to indicate a newline.
VMS, CP/M, DOS, Windows, and many network protocols still expect both: CR LF.
Old IBM systems that used EBCDIC standardized on NL--a character that doesn't even exist in the ASCII character set. In Unicode, NL is U+0085 NEXT LINE, but the actual EBCDIC value is 0x15.
Why did different systems choose different methods? Simply because there was no universal standard. Where your keyboard probably says "Enter", older keyboards used to say "Return", which was short for Carriage Return. In fact, on a serial terminal, pressing Return actually sends the CR character. If you were writing a text editor, it would be tempting to just use that character as it came in from the terminal. Perhaps that's why the older Macs used just CR.
Now that we have standards, there are more ways to represent line breaks. Although extremely rare in the wild, Unicode has new characters like:
U+2028 LINE SEPARATOR
U+2029 PARAGRAPH SEPARATOR
Even before Unicode came along, programmers wanted simple ways to represent some of the most useful control codes without worrying about the underlying character set. C has several escape sequences for representing control codes:
\a (for alert) which rings the teletype bell or makes the terminal beep
\f (for form feed) which moves to the beginning of the next page
\t (for tab) which moves the print head to the next horizontal tab position
(This list is intentionally incomplete.)
This mapping happens at compile-time--the compiler sees \a and puts whatever magic value is used to ring the bell.
Notice that most of these mnemonics have direct correlations to ASCII control codes. For example, \a would map to 0x07 BEL. A compiler could be written for a system that used something other than ASCII for the host character set (e.g., EBCDIC). Most of the control codes that had specific mnemonics could be mapped to control codes in other character sets.
Huzzah! Portability!
Well, almost. In C, I could write printf("\aHello, World!"); which rings the bell (or beeps) and outputs a message. But if I wanted to then print something on the next line, I'd still need to know what the host platform requires to move to the next line of output. CR LF? CR? LF? NL? Something else? So much for portability.
C has two modes for I/O: binary and text. In binary mode, whatever data is sent gets transmitted as-is. But in text mode, there's a run-time translation that converts a special character to whatever the host platform needs for a new line (and vice versa).
Great, so what's the special character?
Well, that's implementation dependent, too, but there's an implementation-independent way to specify it: \n. It's typically called the "newline character".
This is a subtle but important point: \n is mapped at compile time to an implementation-defined character value which (in text mode) is then mapped again at run time to the actual character (or sequence of characters) required by the underlying platform to move to the next line.
\n is different than all the other backslash literals because there are two mappings involved. This two-step mapping makes \n significantly different than even \r, which is simply a compile-time mapping to CR (or the most similar control code in whatever the underlying character set is).
This trips up many C and C++ programmers. If you were to poll 100 of them, at least 99 will tell you that \n means line feed. This is not entirely true. Most (perhaps all) C and C++ implementations use LF as the magic intermediate value for \n, but that's an implementation detail. It's feasible for a compiler to use a different value. In fact, if the host character set is not a superset of ASCII (e.g., if it's EBCDIC), then \n will almost certainly not be LF.
So, in C and C++:
\r is literally a carriage return.
\n is a magic value that gets translated (in text mode) at run-time to/from the host platform's newline semantics.
\r\n is almost always a portability bug. In text mode, this gets translated to CR followed by the platform's newline sequence--probably not what's intended. In binary mode, this gets translated to CR followed by some magic value that might not be LF--possibly not what's intended.
\x0A is the most portable way to indicate an ASCII LF, but you only want to do that in binary mode. Most text-mode implementations will treat that like \n.
"\r" => Return
"\n" => Newline or Linefeed
(semantics)
Unix based systems use just a "\n" to end a line of text.
Dos uses "\r\n" to end a line of text.
Some other machines used just a "\r". (Commodore, Apple II, Mac OS prior to OS X, etc..)
\r is used to point to the start of a line and can replace the text from there, e.g.
main()
{
printf("\nab");
printf("\bsi");
printf("\rha");
}
Produces this output:
hai
\n is for new line.
In short \r has ASCII value 13 (CR) and \n has ASCII value 10 (LF).
Mac uses CR as line delimiter (at least, it did before, I am not sure for modern macs), *nix uses LF and Windows uses both (CRLF).
In addition to #Jon Skeet's answer:
Traditionally Windows has used \r\n, Unix \n and Mac \r, however newer Macs use \n as they're unix based.
\r is Carriage Return; \n is New Line (Line Feed) ... depends on the OS as to what each means. Read this article for more on the difference between '\n' and '\r\n' ... in C.
in C# I found they use \r\n in a string.
\r used for carriage return. (ASCII value is 13)
\n used for new line. (ASCII value is 10)