I have got a project using
GOOGLE_APPLICATION_CREDENTIALS
with a service account json file
I have successfully done
gcloud auth login
as well as
gcloud auth application-default login
I removed GOOGLE_APPLICATION_CREDENTIALS as well as tried with giving some dummy value then run the project still this is looking for GOOGLE_APPLICATION_CREDENTIALS.
I am not able to see from where its searching GOOGLE_APPLICATION_CREDENTIALS service account json file.
I think if the email using for gcloud auth login has all the permissions it should work.. but its not working and searching that json file
Any help highly appreciated...
UPDATE
I tried using below command
export GOOGLE_APPLICATION_CREDENTIALS=~/.config/gcloud/application_default_credentials.json
to set the json file of gcloud auth login
still throwing error
[google.auth._default] DEBUG: Explicit credentials path
/Users/xxx/.config/gcloud/application_default_credentials.json is the
same as Cloud SDK credentials path, fall back to Cloud SDK credentials
Thanks
I am trying to create an internal app to upload files to google cloud. I don't want each individual user or this app to log in so I'm using a service account. I login into the service account and everything is ok, but when I try to upload it gives me this error:
ServiceException: 401 Anonymous caller does not have storage.objects.list access to bucket
As you can see I am logged in with a service account and my account and(neither service or personal) works
I had similar problem, and as always, it took me 2 hours but the solution was trivial, if only it was written somewhere... I needed to login (or authorize, what suits you) to the gsutil in addition to being authorized to the gcloud. I thought they are linked or whatever, but nah. After I ran gsutil config and authorized via the provided link (and code that I pasted back to the console), it started working for me.
Note that I was also logged in to gcloud via a service account linked to my project and having the service account .json key saved locally (see gcloud auth activate-service-account --help.
gcloud auth login solved my issue. You need both steps:
gcloud auth login
gcloud auth application-default login
It happened to me because I had an incomplete initialisation while running gcloud init.
I reinitialised the configuration using gcloud init command and it worked fine.
I can only think of a few things that might cause you to see this error:
Maybe you have an alias set up to a standalone installation of gsutil (which doesn't share credentials with gcloud)?Edit: it's also possible you're invoking the wrong gsutil entry point - make sure you're using <path-to-cloud-sdk>/google-cloud-sdk/bin/gsutil, and not <path-to-cloud-sdk>/google-cloud-sdk/platform/gsutil/gsutil. The platform path will not automatically know about your configured gcloud auth options.
Maybe your service account credentials have moved/are invalid now? If your boto file is referring to a keyfile path and the keyfile was moved, this might happen.
Maybe the gcloud boto file (that gcloud created to use with gsutil when you ran gcloud auth login) is gone. You can run gsutil version -l to see if it's shown in your config path. If gcloud's boto file is present, you should see a line similar to this:
config path(s):
/Users/Daniel/.config/gcloud/legacy_credentials/email#domain.tld/.boto
You can run gsutil version -l to get a bit more info and look into the possibilities above. In particular, these attributes from the output will probably be the most helpful: using cloud sdk, pass cloud sdk credentials to gsutil, config path(s), and gsutil path.
Use this command to resolve some issues
gsutil config
Follow the browser to get a code, then set it in your terminal.
I had the same issue, tried to do gsutil config then it recommended me gcloud auth login which opened google in the browser. After i logged in, i could download with gsutil cp -r gs://my_bucket/Directory local_save_path the entire bucket and save it locally.
I faced the same problem. It took me two days to get this thing working.
I am writing about the whole setup. please refer to step 2 for the answer to the question. FYI my OS is windows 10
Step 1:
Firstly, I faced problems installing gcloud and this is what i did.
The script(.\google-cloud-sdk\install.bat) which is supposed to add gcloud to the path was not working due to permission issues.
I had to add the path manually in two places
1) In the system variables, to the "PATH" variable i added the path to the gcloud bin which should look like - C:\Users\774610\google-cloud-sdk\bin - in my case
2) Additionally gcloud needs python so to the "PATHEXT" variable i appended ".PY" at the end.
After Performing these tasks gcloud started working.
Step 2:
Even though gcloud is working, maven is not able to connect to cloud storage and the error was "401 Anonymous caller does not have storage.objects.list access to bucket"
I was pretty sure i did login to my account and selected the correct project. I also tried adding environment variable as shown in this documentation "https://cloud.google.com/docs/authentication/getting-started"
Nothing seemed to be working even though all the credentials were perfectly setup.
while going through the gcloud documentation I came across this command - "gcloud auth application-default login" which was exactly what i needed.
Refer here for difference between gcloud auth login and gcloud auth application default login
In short what this command does is it obtains your credentials via a web flow and stores them in 'the well-known location for Application Default Credentials' and any code/SDK you run will be able to find the credentials automatically
After this, maven was successfully able to connect to google storage and do its stuff.
Hope this helps, thanks
Does your service account actually have the required permission? The role(s) that will give you this permission are roles/storage.objectViewer / roles/storage.objectAdmin / roles/storage.admin.
Please ensure the service account actually have the permissions in your Cloud Console and then it should work.
--- UPDATE ---
Since you have the correct permission in the account, there it's likely the correct account wasn't used in the gsutil command. This can happen if you have multiple installations of your gsutil tool, please ensure your gsutil has the correct path point to a .BOTO file. There's a similar issue reported on the github repo. You can see if the solution there works.
Ultimately, you can use a new machine / vm with a fresh install to test it out to see if it works. You can this easily by going to the Cloud Console and using the Cloud Shell. No real installation needed, should be very simple to test.
This should work and it will basically isolate your issue (to that of multiple installation) on your original machine. After that, you basically just have to do a clean install to fix it.
If you installed gsutil using python (without gcloud SDK), it may help to run gsutil config and complete steps of initialisation.
Thank you for all the replies.
I would like to share my own experience.
I had to login under the user which is defined when installing Gitlab Runner.
By default, the user indicated in the installation doc is : "gitlab-runner".
So, first, I added a password on this user:
passwd gitlab-runner
then :
su - gitlab-runner
gcloud auth login
gcloud auth application-default login
The issue is solved.
Maybe there is a better way, by directly putting the Google auth files under /home/gitlab-runner
I faced same issue. I used
gcloud auth login
and follow the link
If you are using a service account you need first to authorize it, otherwise gsutil won't have the permission to read/write
gcloud auth activate-service-account --key-file=service_account_file.json
Personally, I had an account with proper permissions registered but I got that error as well despite verifying that my account was running using "sudo gcloud init"
What solved it for me was navigating to the ~/.gutil directory and writing the following
sudo chown jovyan:jovyan *
which let my JupyterLab terminal run, not from root, but from default jovyan.
After that it used my account, not Anonymous caller
Here is another way to edit roles:
gsutil iam ch allUsers:objectViewer gs://tf-learn-objectdetection
Fore more documentation:
gsutil iam help
Use gcloud auth login
Goto mention link
Copy Verification code
Paste Verification code
In my case, even after using gsutils solutions discussed in other answers, I got the error. After checking other google search results, I found out that the reason was that I was authenticating with "my user" while running the gsutils as the root.
Thanks to the answer in the gsutils page in github: https://github.com/GoogleCloudPlatform/gsutil/issues/457
Let me expain what helped me step by step:
First my requirement is to enable CORS, but faced the asked issue, So I followed the below steps:
On Browser side:
Open google cloud console on your browser.
Open Cloud shell editor.
Type gcloud auth login.
Now it will show an command with an url.
Copy that command Don't close browser.
On PC GCloud software side:
Download GCloud Sdk Installer.exe
Open GCLoud in your pc It will ask you to sign In via browser
Signin with correct email id
Select your project from the shown list
Paste the previously copied command
Again it will ask you to signIn
Select the proper account to sign in
Now the GCloud cmd will show you another command with url as output
Copy the output Open your browser, then paste it.
Done! It will show like You are now logged in as xyz#gmail.com
Now I'm able to set CORS without any exception.
Hope these steps will be helpfull for someone who is new to the issue.
Looks like account information is not stored with gsutil
Step 1:
gsutil config
Step 2:
copy url in browser
Step3:
select account and grant permission
Step 4:
Copy key and share it in gsutil promt "step1 will be asking for this key to proceed"
Step 5:
Run command whose access was denied
Thank you Petr Krýže!!! you saved my day...
I had a gcloud user authenticated and was running gsutils fine from the command line (Windows 8.1). But I needed to access gsutils from a python application so I followed the instructions here:
https://cloud.google.com/storage/docs/xml-api/gspythonlibrary#credentials
I got as far as creating a .boto file, but now not only does the my python code fail (boto.exception.NoAuthHandlerFound: No handler was ready to authenticate.). But I can't run bsutils from the command line any more. I get this error:
C:\>gsutil ls
You are attempting to access protected data with no configured
credentials. Please visit https://cloud.google.com/console#/project
and sign up for an account, and then run the "gcloud auth login"
command to configure gsutil to use these credentials.
I have run gcloud auth and it appears to work, I can query my users:
C:\>gcloud auth list
Credentialed Accounts:
- XXXserviceuser#XXXXX.iam.gserviceaccount.com ACTIVE
- myname#company.name
To set the active account, run:
$ gcloud config set account `ACCOUNT`
I have tried both with the account associated with my email active, and the new serveruser account (created following instructions above). Same "protected data with no configured credentials." error. I tried removing the .boto file, and adding the secret CLIENT_ID and CLIENT_SECRET to my .boto file.
Anyone any ideas what the issue could be?
So I think the latest documentation/examples showing how to use (and authenticate) Google Cloud storage via python is in this repo:
https://github.com/GoogleCloudPlatform/python-docs-samples/tree/master/storage/api
That just works for me without messing around with keys and service users.
Would be nice if there was a comment somewhere in the old gspythonlibrary docs pointing this out.
I was sure it will be simple but couldn't find any documentation or resolution.
I'm trying to write a script using gcloud to perform some operations in my GCP instances.
Is there anyway to login/authenticate using gcloud via command line only?
Thanks
You have a couple of options here (depending on what exactly you're trying to do).
The first option is to log in using the --no-launch-browser option. This still requires interaction from a human user, but doesn't require a browser on the machine you're using:
> gcloud auth login --no-launch-browser
Go to the following link in your browser:
https://accounts.google.com/o/oauth2/auth?redirect_uri=urn%3Aietf%3Awg%3Aoauth%3A2.0%3Aoob&prompt=select_account&response_type=code&client_id=32555940559.apps.googleusercontent.com&scope=https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fuserinfo.email+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fcloud-platform+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fappengine.admin+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fcompute&access_type=offline
Enter verification code: *********************************************
Saved Application Default Credentials.
You are now logged in as [user#example.com].
Your current project is [None]. You can change this setting by running:
$ gcloud config set project PROJECT_ID
The non-interactive option involves service accounts. The linked documentation explains them better than I can, but the short version of what you need to do is as follows:
Create a service account in the Google Developers Console. Make sure it has the appropriate "scopes" (these are permissions that determine what this service account can do. Download the corresponding JSON key file.
Run gcloud auth activate-service-account --key-file <path to key file>.
Note that Google Compute Engine VMs come with a slightly-different service account; the difference is described here.
I followed Google's instructions to install Python and gsutil on Windows. When I attempt to download reviews with this command line:
c:\gsutil>c:\python27\python gsutil cp -r gs://pubsite_prod_rev_########/reviews/reviews_package.name_2015* c:/temp/xxx
I get this error message:
You are attempting to access protected data with no configured
credentials. Please visit https://cloud.google.com/console#/project
and sign up for an account, and then run the "gsutil config" command
to configure gsutil to use these credentials.
I don't have a Google Cloud Platform subscription. Do I need to pay for one to access the ratings?
You can use the account that is responsible for that app. You will have to install the Cloud SDK and authenticate using :
gcloud auth login
Once you do that and paste the link on a browser tab using the account that hosts the app you will receive the credentials that you can pass to gcloud and they will get saved.
Then you can use the command and won't get the error.