For some reason I can't enter parentheses in Eclipse. SHIFT + 8 doesn't work. I have to press CTRL + SHIFT + 8 in order to get an opening parentheses (likewise for ")").
I believe the reason for this is Ctrl "Contrib (Button)" which is some sort of status message at the lower right corner. I'm not sure if it's always been there, but probably not.
This is the only similar problem I found in the net, but the solution doesn't work for me, because such a path (Help -> Software Updates -> Manage Configuration) doesn't exist in my version of Eclipse. Help -> Search didn't help either.
How do I get rid of it? If it's not the source of my problem, what is? Going with CTRL + SHIFT + 8/9 to enter parentheses is really annoying and its not something I'd like to get used to.
The reason for these weired short cuts came up with eclipse sdk. If you downloaded and install the Eclipse SDK Tests you will find some weired settings. Like a blue texftfield in bottom right corner with "Ctrl Contributor" in it and also these short cuts.
To uninstall only these packages go to Window -> Installation Details -> Installed Software (tab) and searching for Test. You should find Eclipse SDK Tests and uninstall it. It just adds some non-sense features to your IDE to test if everything works.
Hope it helped and sorry for my english!
Found this, which solved my problem.
Went to Window -> Preferences -> General -> Keys, and looked for key combinations that used SHIFT + 8. There were two such options:
- Import
- Add to Working Set
I removed the hotkeys from them and restarted Eclipse. It worked for me.
I spend a lot of time going back and forth between SBT and IntelliJ, getting a file, line number, and error from SBT and navigating to it in IntelliJ. Is there a way to automate this at all? Even if it's only via IntelliJ's compiler, I'd love to be able to navigate to the next error project-wide.
To navigate between errors or warnings in IntelliJ you can do one of the following:
Use keyboard shortcuts F2 (Next) and Shift+F2 (Previous) respectively.
On the main menu, choose Navigate | Next / Previous Highlighted Error.
I am using Ctrl+Alt+Up/Down to scroll through the list of errors. This is inside the Compile Messages window. The SBT Console uses the same shortcut, as stated in the SBT wiki.
For this specific question, just use F2 (Next) and Shift+F2 (Previous);
But for any other questions related to shortcuts of IDEA, searching in the Settings-Keymap is better than in Google.
To go to next compilation error in the next file:
Command-0 (go to messages tab where compile errors are)
Down arrow until get to next error
Enter
Esc to get to back to code where this error is
The highly voted answer has not really answered the question. The provided solution of F2 only navigates through the errors in the current file. But picking up from the comments, the suggestion below is not the ultimate answer but is a little bit closer.
Select Problems as shown in the image below
This will list all files that have errors.
Use F2 to navigate through the errors.
At least with this method, it has narrowed down the files with the errors and are just a click away.
2022 UPDATE
This is a whole project, error to error, one-click solution after a 2-second setup. For both setups, optionally disable generate warnings for your compiler.
Windows/Linux Setup
Alt6 or click Project Errors tab of Problems tool window
CtrlNumPad+ or click
to expand all errors
MacOS Setup
Cmd6 or click Project Errors tab of Problems tool window
Cmd+ or click to expand all errors
Now click the first error in the Project Errors tab, fix it, then click the next error. Works regardless of build tool and may work in older versions of intellij than 2022.1.
Edit: Credit #Manuel Romeiro - the answer in his comment worked for a while, but stopped when intellij got confused somehow. Will update my answer if I figure that out.
Thanks #meridsa for providing setup step 1 for Mac. Also to #K. Symbol for syntax for showing keys in an answer (very cool).
For the mac I couldn't find anything that worked until I discovered the following
cmd + 1 -> f2 (on files) -> escape -> f2 (inside file) -> cmd + 1 -> repeat
For going to the next error across the entire project, use Alt+F2 instead of just F2.
On Mac, you can enable Fn regular key functionality in System Preference.
Choose Apple Menu > System Preferences.
Click Keyboard & Mouse.
Click the Keyboard tab.
Select the option Use All F1, F2, Etc. Keys As Standard Function Keys.
Quit System Preferences.
Eclipse 3.5.2 is not stopping in breakpoints. It's as if the debugger is using an older version of the source file.
Tried the usual refresh, clean all projects, build all, with no change.
Already in debug mode and the break point is checked.
*ok ended up deleting the whole project and checking it out again. but still curious what the issue was.
Perhaps you have pushed the Skip all Breakpoints button in the Breakpoints view.
Thanks guys, this really saved my day too.
I antecedently pressed on skip break points, if you did the same this will result on break point appearing with a backslash icon on them.
To bring it back to normal:
Switch to Debug perspective.
press on the breakpoints view tap -->> upper right hand corner of the screen, you also can go there by Window->show view-> breakpoints.
5th icon from the left you will see break point with backslash. press on that one.
To confirm, try putting break point on any line, and it should appear normally.
Press Ctrl + Alt + B
OR go through below steps
Clearing all Breakpoints fixed the issue
(within debugger perspective: Window -> Remove All Breakpoints).
Rebuilding the project did not work for me.
Sometimes you do start the debug mode but the debugger doesn't actually get attached/gets detached. I've also had this issue a few times when my laptop was reacting really slowly.
A reboot always solved it for me.
Also try doing a clean all (works miracles in Eclipse).
Please un check this from the Eclipse Menu.
Run->Skip all breakpoints.
I think this will be enabled permanently once You select the Remove all Break points option in the Debug/Breakpoints window.
Performing a "Clean All" worked for me.
Click on "Project" tab --> "Clean" menu-item.
In the "Clean" dialogue-box select "Clean all projects" radio-button. Leave the remaining values as default. Click "OK" button.
BINGO!!!The remote-debugging started working for me as beautiful as before.
It has also happened to me, in my case it was due to the GDB launcher, which I needed to turn to "Legacy Create Process Launcher". To do so,
either change the default launchers to the "Legacy Create Process Launcher", in Windows>Preferences>Run/Debug>Launching>Default Launchers.
or choose this launcher in the debug configuration of your application (Run>Debug configurations>choose your debug configuration). Under the "main" tab at the bottom, click on "Select other...", check the box "Use configuration specific settings" and choose "Legacy Create Process Launcher".
I had a conditional break point wrongly put on the method entry point. Removed that breakpoint and it worked.
Note: Tried Skip all Breakpoints, Clean all projects, Refresh, close Eclipse with no luck before nailing it.
In my case, somehow the breakpoints got automatically disabled because of this switch turned on, skip breakpoints.
Breakpoints have seemed to work and not-work on the versions of Eclipse I've used the last couple years. Currently I'm using Juno and just experienced breakpoints-not-working again. The solutions above, although good ones, didn't work in my case.
Here's what worked in my case:
deleted the project
check it back out from svn
import it into Eclipse again
run "mvn eclipse:eclipse"
Since the project is also a Groovy/Http-bulder/junit-test project, I had to:
convert the project from Java to Groovy
add /src/test/groovy to the Java Build Path (Source folders on build path)
include "**/*.groovy" on the Java Build Path for /src/test/groovy
I had all breakpoints enabled and configured as I should. But whenever I clicked "debug" it would only step through the program (press f5/f6) Turns out there was a rogue setting
Right Click project > debug configurations > "Debugger" tab > uncheck "Stop on startup at:" box
One reason for this situation can be, that you have pressed 'skip all breakpoints', when play- and another pictures are smaller than those normally are (because of higher resolution screen). Another thing can be, that break points are stopped only under VM threads, not under normal threads!
Go to (eclipse-workspace)\.metadata\.plugins\org.eclipse.wst.server.core and delete all tmp folders.
Clean and Restart server.
In my case I had to enable then disable an option in the Preferences.
I don't prefer the debug view to keep jumping when a breakpoint is hit so I disabled this option, but caused the issue in question.
The solution was to enable it again, start a debug session, the breakpoint is hit and shown in the UI, then disable again the option.
Looks like a bug in Eclipse 4.17
UPDATE
There is also another simpler way that will make Eclipse show the debugging highlight at the breakpoint or rather refresh the debugging UI to work as it should. After the breakpoint is reached, Eclipse will ask you to switch to debugging mode if you are not already in, click switch button, then activate the debug tab/view, you will notice that the stepping buttons are activated and the breakpoint line is highlighted.
First remove all 'toggle breakpoints' from the class file.
Then Eclipse requires a restart.
Then make sure 'Skip All breakpoints' is NOT enabled. If it is, make it disabled.
Then, add toggle breakpoint to the lines in your file and run on Debug mode.
A pop-up window must appear to confirm if you really want to Switch to debug mode. Say Yes and proceed.
I suddenly experienced the skipping of breakpoints as well in Eclipse Juno CDT. For me the issue was that I had set optimization levels up. Once I set it back to none it was working fine. To set optimization levels go to Project Properties -> C/C++ Build -> Settings -> Tool Settings pan depending on which compiler you are using go to -> Optimization and set Optimization Level to: None (-O0).
Hope this helps! Best
I had the same problem, and I found the real cause.
I had written some concurrent / multi-threads code, while I added some breakpoints inside the code running in a new thread. So, when JUnit tests ran over, and stopped soon, the code will not reach and stop at the breakpoints.
For this situation, we have to click and select "Keep JUnit running after a test run when debugging" check box at "Debug Configurations..."
switching workspace worked for me.
Go to File > Switch Workspace and choose different folder (workspace)
That's it and BINGO! Debugging started working for me as beautiful as before.
go breatpoint and click on 5th to eclipse->window>->show view->other->debug->breakpoint and click on 5th option (Skip All Breakpoints)
Make sure, that you are using the correct JRE version to debug your project. Especially if it's a third party project.
Also make sure, that there is no trigger point set for any breakpoint.
I had the same problem when I was using Eclipse Juno.. I installed Eclipse Indigo and it works fine. Try to reinstall eclipse.
A different solution worked for me. I also faced the same problem - debug points were not being updated, though they are shown correctly in the IDE editor and in Break Points tab.
My problem and solution are: While creating the project, the 'Default Output Folder' points to different location. At a later stage, I have mavenized the project, selecting "Project Right Click - Configure - Convert to Maven Project". So there are two sets of output folders exist in my project file system. Cleaning the project multiple times did not solve my problem. In the background it was pointing to different binary files. Finally, when I removed the Maven Feature and cleaned the project, this time everything worked fine. Env: Eclipse Juno and JRE is J2SDK 1.5.
I get all breakpoints skipped and marked as warnings when using -O2 in the compiler flags. Switched to -O0 -g in my makefile and breakpoints now work. Hope this helps.
If it doesn't stop even after unchecking SKIP ALL BREAKPOINTS, you can add this android.os.debug.waitfordebugger just before your breakpoint.
If you do this,your app will definitely wait for debugger at that point everytime,even if you are just running your app,which it will only find when your device is connected to eclipse.
After debugging you must remove this line for app to run properly or else android will just keep waiting for the debugger.
Try to restart eclipse, that works sometimes. I guess there is some kind of cache there.
In my case the debugged code in JBoss was older than the code in the Eclipse project. Rebuilding the .war solved the problem.
Facing same problem with Eclipse Luna.
Project clean didn't work.
Rebuild didn't work.
What makes it work is uninstall the app on the device before each debugging.
I use the Eclipse FileSync plugin for live remote debugging. Make sure you tick Allow different target folders & edit the Target folder file setting in the tree view.
Setting the Default target folder by the Browse... button without Allow different target folders will set all folders to the same target (I had both libs & classes set to the default for libs so my breakpoints did not update).
Since Eclipse 4.7/Oxygen released in June 2017, there is a new concept of "Triggers for breakpoints", which is displayed as a small "T" next to the breakpoint "blue bullet" icon.
All the other breakpoints that are initially suppressed by triggers
will be hit only after any of the trigger points has been hit. All the
triggers are disabled after a trigger point is hit and will be
re-enabled after the run.
In order to reset all the "trigger" flags, you need to do the following steps :
Switch to Debug perspective.
Right-click in the "Breakpoints" view
Select "Remove All Triggers".
Note : this step does not delete all your breakpoints, which occurs when selecting "Remove All" in the same contextual menu.
Note : the keyboard shortcut to enable the triggers is "Alt-R", which takes precedence on the shortcut to open the "Run" menu with its mnemonics, when the "Breakpoints" view is selected.