In a mapping editor, the display is correct after the legacy to unicode conversion for DEVANAGARI text shown using a unicode font (Arial Unicode MS). However, in MS-WORD, the display isn't as expected for the same unicode text in the unicode font (Arial Unicode MS) or any other Devanagari unicode fonts. The expected sequence of unicodes are provided as per the documentation. The sequence can be seen on the left-hand side table.
Please let me know where I am going wrong.
Thanks for your help!
Does your map have to insert the zero_width_joiner? The halant (virama) by itself is enough to get the half-consonant (for some combinations) and in particular, it may be that Word is using the presence of the ZWJ to keep them separate.
If getting rid of the ZWJ doesn't help, another possibility is that Word may be treating the individual characters of the text string as individual "runs" of text.
If those first 4 characters are not in a single run, this can happen.
[aside: the way to tell if it's being treated as a single run, is to save the document as an xml file and then open it with something like notepad++ and look at the xml "w:t" element (IIRC) associated with these characters. If they're all in separate w:t elements, it means they're in separate runs. In that case, you might need to copy the text from Word to some other tool (e.g. Notepad++) and then copy it from there and paste it back in Word -- that might cause it to be imported into Word in a single run.
So this web page is rendering with these symbols and they are found throughout this website/application but on no other sites. Can anyone tell me
What this symbol is?
Why it is showing up only in one browser?
That character is U+2028 Line Separator, which is a kind of newline character. Think of it as the Unicode equivalent of HTML’s <br>.
As to why it shows up here: my guess would be that an internal database uses LSEP to not conflict with literal newlines or HTML tags (which might break the database or cause security errors), and either:
The server-side scripts that convert the database to HTML neglected to replace LSEP with <br>
Chrome just breaks standards by displaying LSEP as a printing (visible) character, or
You have a font installed that displays LSEP as a printing character that only Chrome detects. To figure out which font it is, right click on the offending text and click “Inspect”, then switch to the “Computed” tab on the right-hand panel. At the very bottom you should see a section labeled “Rendered Fonts” which will help you locate the offending font.
More information on the line separator, excerpted from the Unicode standard, Chapter 5.8, Newline Guidelines (on p. 12 of this PDF):
Line Separator and Paragraph Separator
A paragraph separator—independent of how it is encoded—is used to indicate a
separation between paragraphs. A line separator indicates where a line break
alone should occur, typically within a paragraph. For example:
This is a paragraph with a line separator at this point,
causing the word “causing” to appear on a different line, but not causing
the typical paragraph indentation, sentence breaking, line spacing, or
change in flush (right, center, or left paragraphs).
For comparison, line separators basically correspond to HTML <BR>, and
paragraph separators to older usage of HTML <P> (modern HTML delimits
paragraphs by enclosing them in <P>...</P>). In word processors, paragraph
separators are usually entered using a keyboard RETURN or ENTER; line
separators are usually entered using a modified RETURN or ENTER, such as
SHIFT-ENTER.
A record separator is used to separate records. For example, when exchanging
tabular data, a common format is to tab-separate the cells and to use a CRLF
at the end of a line of cells. This function is not precisely the same as line
separation, but the same characters are often used.
Traditionally, NLF started out as a line separator (and sometimes record
separator). It is still used as a line separator in simple text editors such as
program editors. As platforms and programs started to handle word processing
with automatic line-wrap, these characters were reinterpreted to stand for
paragraph separators. For example, even such simple programs as the Windows
Notepad program and the Mac SimpleText program interpret their platform’s NLF
as a paragraph separator, not a line separator. Once NLF was reinterpreted to
stand for a paragraph separator, in some cases another control character was
pressed into service as a line separator. For example, vertical tabulation VT
is used in Microsoft Word. However, the choice of character for line separator
is even less standardized than the choice of character for NLF. Many Internet
protocols and a lot of existing text treat NLF as a line separator, so an
implementer cannot simply treat NLF as a paragraph separator in all
circumstances.
Further reading:
Unicode Technical Report #13: Newline Guidelines
General Punctuation (U+2000–U+206F) chart PDF
SE: Why are there so many spaces and line breaks in Unicode?
SO: What is unicode character 2028 (LS / Line Separator) used for?
U+2028 on codepoints.net A misprint here says that U+2028 was added in v. 1.1 of the Unicode standard, which is false — it was added in 1.0
I found that in WordPress the easiest way to remove "L SEP" and "P SEP" characters is to execute this two SQL queries:
UPDATE wp_posts SET post_content = REPLACE(post_content, UNHEX('e280a9'), '')
UPDATE wp_posts SET post_content = REPLACE(post_content, UNHEX('e280a8'), '')
The javascript way (mentioned in some of the answers) can break some things (in my case some modal windows stopped working).
You can use this tool...
http://www.nousphere.net/cleanspecial.php
...to remove all the special characters that Chrome displays.
Steps:
Paste your HTML and Clean using HTML option.
You can manually delete the characters in the editor on this page and see the result.
Paste back your HTML in file and save :)
I recently ran into this issue, tried a number of fixes but ultimately I had to paste the text into VIM and there was an extra space I had to delete. I tried a number of HTML cleaners but none of them worked, VIM was the key!
9999years answers is great.
In case you use Symfony with Twig template I would recommend to check for an empty Twig block. In my case it was an empty Twig block with an invisible char inside.
The LSEP char was only displayed on certain device / browser.
On the other I had a blank space above the header and I could not see any invisible char.
I had to inspect the GET request to see that the value 1f18 was before the open html tag.
Once I removed an empty Twig block it was gone.
hope this can help someone one day ...
My problem was similar, it was "PSEP" or "P SEP". Similar issue, an invisible character in my file.
I replaced \x{2029} with a normal space. Fixed. This problem only appeared on Windows Chrome. Not on my Mac.
I agree with #Kapil Bathija - Basically you can copy & paste your HTML code into http://www.nousphere.net/cleanspecial.php and convert it.
Then it will convert the special characters for you - Just remove the spaces in between the words and you will realize you have to press backspace 2x meaning there is an invalid character that can't be translated.
I had the same issue and it worked just fine afterwards.
You can also copy the text, paste it into a HTML editor such as Coda, remove the linebreak, copy it and paste it back into your site.
Video here: https://www.loom.com/share/501498afa7594d95a18382f1188f33ce
Looks like my client pasted HTML into Wordpress after initially creating it with MS-Word. Even deleting the and visible spaces did not fix the issue. The extended characters became visible in vi/vim.
If you don't have vi/vim available, try highlighting from 2 chars before the LSEP to 2 chars after the LSEP; delete that chunk, and re-type the correct characters.
My CSS files have become contaminated with "file separator" characters (AKA "INFORMATION SEPARATOR FOUR" or ALT/028 characters). How can I get rid of them?
This is the character:
http://www.fileformat.info/info/unicode/char/1c/index.htm
Background
I manage a number of .CSS text files that are fairly similar. Unfortunately a number of these file have somehow got "file separator" characters pasted into them. Although they do still seem to work in browsers any file that has one of these characters anywhere within it can not be indexed by my desktop search utility (X1 Search). And this is making them extremely hard for me to manage because I need to compare CSS files contantly.
[Bizarrely X1 Search ignores the character if the filename extension is .TXT but files to index the entire file if the filename extension is .CSS]
Worse this "file separator" character is almost invisible within my text editor (TextPad 7.2). The only way I can detect it is to make spaces and carriage returns visible and then it appears as blank space. Worse still it appears to be impossible to search for using text search.
To make it clear what I mean an example that I have pasted into this page. The "file separator" character is on LineB below
LineA
LineB
LineC
LineD
Is there any way to remove this character from multiple text (in this case CSS) files at once?
NB I do NOT want to remove the whole line, just the one character(!)
Thanks
J
P.S. I am running on Windows7 (x64). I am using TextPad 7.3.
I have eventually managed to answer my own question.
Text Crawler and the use of a regular expression of "\x1c" appears to be the answer.
Fwiw, both Agent Ransack and FileLocator Pro filter out any characters in the ASCII range 0-31 (excluding 0x09 - tab) from the input field.
I have a file that looks like this in notepad++
I can easily see the spaces (being the orange dots), and tabs (being the orange arrows). I can also right click this in MATLAB and import it in a variety of ways. The problem is firstly the delimiters are not consistent. It seems to go TAB then some spaces to make sure the total field equals 6 characters...
The only way I understand reading a file in is if you already know how it is delimited. But in this case I would like to parse each line so MATLAB has some 'token' of what goes where eg:
Line1: Text Space Text Space Text Tab Space Space Text NEWLINE
(Notepad++ seems to know just fine so surely MATLAB can get this info too?).
Is this possible? Then it would be nice to use this information to save the imported data back out to a file with exactly the same formatting.
The data is below. For some reason copying this into notepad++ does not preserve its delimiting, you will need to add the tabs in yourself so it looks like the file in the screenshot.
Average Counts : 56.2
Time : 120
Thanks
If you use textscan, the default behaviour should probably suit your needs:
Within each row of data, the default field delimiter is white space. White space can be any combination of space (' '), backspace ('\b'), or tab ('\t') characters. If you do not specify a delimiter, textscan interprets repeated white-space characters as a single delimiter.
The output is a cell array, where each column is saved as a cell. So C{1} would contain the strings, C{2} the colons, and C{2} the values.
I have a JasperReports template that contains a textField element that will contain a variable length of strings. If the string is too long to fit the width, it'll be split which is fine except when the string contains a hyphen or a space char. In this case the string is split from that char. Below are some example of what's the input, observed outcome and wanted outcome + summary to make my point easier to understand.
input observed wanted summary
_____________________________________
overflow -> overfl -> overfl : OK
over flow -> over -> over f : NOT OK
over-flow -> over- -> over-f : NOT OK
Setting the reportElement to have isStretchWithOverflow="true" attribute will split the text on two lines, but this is not wanted behaviour.
Is there anyway to fix this?
Thanks.
EDIT: The input data comes from an external source, so I cannot directly change that. I ran some tests and noticed that using non-breaking space will do for spaces. non-breaking hyphen on the other hand is not printed at all, i.e. text 'over-flow' becomes 'overflow'. Not quite what is wanted.
Despite the input source not in my control, I could fix this problem by writing a Scriptlet that'll change spaces to non-breaking spaces and hyphens to non-breaking hyphens, only if those darn non-breaking hyphens would be printed.
Printing to PDF by the way, in case that gives some hints of the problem.
Type in the Text field ''Expression'' like this:
String.join("\uFEFF", $F{field1}.split("(?!^)"))
It's a font issue. Non-breaking hyphen works(\u2011) fine, when the font supports it. See fonts sample on how load other than the default font (DejaVu Sans for example).
If anyone has a better option for the input source modification than the Scriptlet, please let me know.
(Marking my own answer as correct in order to get this topic closed.)
EDIT: Have to wait for two days in order to mark this answer correct.