In https://source.android.com/devices/architecture/vndk/deftool, it mentions that Google provides a tag file to classify the framework shared libraries, including LL-NDK, SP-NDK, VNDK, VNDK-SP and etc. However, after searching on this website and googling it, I'm not able to find the tag file. Where does Google provide it?
Thanks
Jincan
I found how to get such files.
You must get the file of vendor.img and system.img, for that is a file for deploying at "vendor partition" and "system partition" at a device.
Step 1
Please visit to Driver Binaries for Nexus and Pixel Devices.
There are images for two devices.
taimen (Pixel 2 XL)
walleye (Pixel 2)
Step 2: Method for file expand
Please read README.md.
There is undermentioned code
$ simg2img system.img system.raw.img
$ simg2img vendor.img vendor.raw.img
$ mkdir system
$ mkdir vendor
$ sudo mount -o loop,ro system.raw.img system
$ sudo mount -o loop,ro vendor.raw.img vendor
$ sudo python3 vndk_definition_tool.py vndk \
--system system \
--vendor vendor \
--aosp-system /path/to/aosp/generic/system \
--tag-file eligible-list-v3.0.csv
For detail, Please see that "README.md".
Thank you
git clone https://android.googlesource.com/platform/development
~/tools/development/vndk/tools/definition-tool/datasets[master]$ ls
eligible-list-o-mr1-release.csv eligible-list-o-release.csv minimum_dlopen_deps.txt minimum_tag_file.csv
Related
I am trying to install Argo CLI by following this (https://github.com/argoproj/argo-workflows/releases) documentation.
# Download the binary
curl -sLO https://github.com/argoproj/argo/releases/download/v3.1.3/argo-linux-amd64.gz
# Unzip
gunzip argo-linux-amd64.gz
# Make binary executable
chmod +x argo-linux-amd64
# Move binary to path
mv ./argo-linux-amd64 /usr/local/bin/argo
# Test installation
argo version
The above instructions are not working. So, I followed the answer to this (How to update Argo CLI?) question.
curl -sLO https://github.com/argoproj/argo/releases/download/v2.12.0-rc2/argo-linux-amd64
chmod +x argo-linux-amd64
./argo-linux-amd64
But I am getting the following error:
./argo-linux-amd64: line 1: Not: command not found
I also tried moving the argo-linux-amd64 binary to /usr/local/bin/argo but still getting the same error (as expected).
Is there any solution to this?
Thank you.
The download links on the Releases page are incorrect. Try this one:
curl -sLO https://github.com/argoproj/argo-workflows/releases/download/v3.1.3/argo-linux-amd64.gz
I've submitted an issue to get the links fixed.
I'm trying to modify the devicetree on my Coral SoM to support a different DSI display, and could use some pointers.
I edited arch/arm64/boot/dts/freescale/fsl-imx8mq-phanbell.dts
then used 'm' to make all
Question:
What is the correct way to modify the devicetree, build and load it to the board!?
Thanks!
can you give a little more details on the changes?
You can definitely do it that way, and I believe you don't need to rebuilt the entire OS, just the kernel is fine:
$ m docker-linux-imx
$ cd ./out/product/packages/bsp
$ scp ./linux-image-4.14.98-imx_11–4_arm64.deb mendel#board-ip
$ ssh mendel#board-ip
$ sudo dpkg -i ./linux-image-4.14.98-imx_11–4_arm64.deb
Another way is to create a device tree overlays. For instance here is a dts for disabling the hdmi: https://gist.github.com/Namburger/f700eb6b18bd1e3697638088d5995c8b
You can then compile it and move it to /boot:
$ dtc -# -I dts -O dtb -o disable-hdmi.dtbo disable_hdmi.dts
$ sudo mv disable-hdmi.dtbo /boot
Then add the file to /boot/overlays.txt to apply it:
$ cat /boot/overlays.txt
# List of device tree overlays to load. Format: overlay=<dtbo name, no extenstion> <dtbo2> ...
overlay= disable-hdmi
Thank you very much Nam.
The first option I think was already working, but I was not sure how to check. It appears that the devicetree can be examined by looking in /proc/device-tree/ for example cat hdmi#32c00000/status gives 'disabled' after doing the modification above, and the HDMI can be verified not working.
i'm trying to install Docker-compose on my Raspberry Pi 3+ which installed Raspbian buster.
I followed instruction on docker.com. After I entered command : sudo curl -L https://github.com/docker/compose/releases/download/1.20.0/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose.
It show a table for downloading
Result
It seems nothing downloaded, just have a file docker-compose saved in /usr/local/bin/docker-compose. When I opened it, it empty. Then I enter command docker-compose -v, it displayed error /usr/local/bin/docker-compose : line 1: Not: command not found.
Anyone have solution?
UPDATE:
Added the following command to my answer to download the LATEST version without specifying any version number at all so the download can be scripted.
curl -L "https://github.com/docker/compose/releases/download/$(curl https://github.com/docker/compose/releases | grep -m1 '<a href="/docker/compose/releases/download/' | grep -o 'v[0-9:].[0-9].[0-9]')/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
It's a bit untidy, but it works. If you have a more elegant way than mine, ping it to me in the comments and I'll update my answer.
Just need to set the perms on the file:
chmod +x /usr/local/bin/docker-compose
Use the file command to validate that you pulled the correct arch for your system.
Intro:
Although docker-compose can be installed from a repo per the accepted answer, apt-cache show docker-compose reveals that as of 20211201 the repo version is only v1.25; about 2 years behind the current v2.1.1 release. In order to take advantage of more modern docker file versions, I needed to get the Github download working.
Short Answer:
The Docker documentation for Docker-Compose is WRONG. They forgot to preface the version number in the command with a "v"; consequently the download fails. Apparently this has been wrong for ages...
Longer Answer:
I ran the below command from the Docker-Compose documentation, and substituted the version "2.1.1" for "1.29.1" per Docker's guidance:
To install a different version of Compose, substitute 1.29.2 with the
version of Compose you want to use.
sudo curl -L "https://github.com/docker/compose/releases/download/2.1.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
The resulting download was 9 KB for a 23 MB binary. Clearly the link was bogus. So I went to the root of the address used in the command "https://github.com/docker/compose/releases" and right-clicked on the version of Docker-Compose that I wanted and chose "Copy Link Address"
This revealed the link Docker was telling folks to use didn't have a "v" prefaced before the version number in the https:// address part of the command.
Solution:
Preface a "v" before the version number you want in the link as below and the command executes successfully:
sudo curl -L "https://github.com/docker/compose/releases/download/v2.1.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
BTW, I too was downloading docker-compose for a Raspberry Pi using the aarch64 binary for Ubuntu 20.04 LTS. However, the missing "v" fix for the broken download address should work for any platform.
This is because on a raspberry pi the url part of the command results in
https://github.com/docker/compose/releases/download/1.24.1/docker-compose-Linux-armv7l
Looking at the latest stable release at https://github.com/docker/compose/releases/tag/1.24.1 you can see there is no download for the armv7l architecture so the file is empty because there is nothing to download.
Will update answer once I figured out how to install docker-compose on Raspian.
Edit:
Via apt-get. Note: Currently (Nov. 8 2019) this installs version 1.21 which is not the latest available.
sudo apt-get install docker-compose
Via pip3. (Installs latest)
sudo apt-get install python3-pip
sudo pip3 install docker-compose
And then restart your system with
sudo shutdown -r
(Using ubuntu 16 0n my mac pro.)
To integrate gstreamer and pocketsphinx, I need three .pc files as the offical website says:
gstreamer-1.0.pc
gstreamer-base-1.0.pc
gstreamer-plugins-base-1.0.pc
I start a new empty ubuntu 18.
install the gstreamer through
$ sudo apt-get install libgstreamer1.0-dev
But only two of the three important .pc files exist after the previous command.
If I cd to /usr/ and run :
sudo find . -print | grep -i 'gstreamer-plugins-base-1.0'
the terminal returns empty( not found).
At the same time,
sudo find . -print | grep -i 'gstreamer-base-1.0'
and
sudo find . -print | grep -i 'gstreamer-1.0'
will give me correct paths.
Where is the missing gstreamer-plugins-base-1.0.pc file? Thank you.
If there are only two but not three of the .pc files, the configuration of pocketsphinx will not work.
**sudo apt-get install libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev**
helped me generate the missing gstreamer-plugins-base-1.0.pc file.
Those two are needed.
I tied the following steps
cd $GOPATH/src/github.com/grafana/grafana
go run build.go setup
I got the following
Version: 2.5.0-pre1, Linux Version: 2.5.0, Package Iteration: pre1
go get -v github.com/tools/godep
github.com/tools/godep (download)
github.com/tools/godep/Godeps/_workspace/src/github.com/kr/fs
github.com/tools/godep/Godeps/_workspace/src/github.com/pmezard/go-difflib/difflib
github.com/tools/godep/Godeps/_workspace/src/golang.org/x/tools/go/vcs
github.com/tools/godep
go get -v github.com/blang/semver
github.com/blang/semver (download)
github.com/blang/semver
go get -v github.com/mattn/go-sqlite3
go install -v github.com/mattn/go-sqlite3
then i executed
$GOPATH/bin/godep restore
i got no putput but command got executed
then i ran the command
go run build.go build
Version: 2.5.0-pre1, Linux Version: 2.5.0, Package Iteration: pre1
rm -r bin
rm -r Godeps/_workspace/pkg
rm -r Godeps/_workspace/bin
rm -r dist
rm -r tmp
rm -r /Users/skhare/sk/go/pkg/darwin_amd64/github.com/grafana
rm -r ./bin/grafana-server
rm -r ./bin/grafana-server.md5
GOPATH=/Users/skhare/sk/go/src/github.com/grafana/grafana/Godeps/_workspace:/Users/skhare/sk/go
go build -ldflags -w -X main.version '2.5.0-pre1' -X main.commit 'v2.1.2+394- gfb767f5' -X main.buildstamp 1442671169 -o ./bin/grafana-server .
# github.com/grafana/grafana
link: warning: option -X main.version 2.5.0-pre1 may not work in future releases; use -X main.version=2.5.0-pre1
link: warning: option -X main.commit v2.1.2+394-gfb767f5 may not work in future releases; use -X main.commit=v2.1.2+394-gfb767f5
link: warning: option -X main.buildstamp 1442671169 may not work in future releases; use -X main.buildstamp=1442671169
then i executed
npm install
i had to install npm
>npm install -g grunt-cli
/usr/local/bin/grunt -> /usr/local/lib/node_modules/grunt-cli/bin/grunt
grunt-cli#0.1.13 /usr/local/lib/node_modules/grunt-cli
├── resolve#0.3.1
├── nopt#1.0.10 (abbrev#1.0.7)
└── findup-sync#0.1.3 (lodash#2.4.2, glob#3.2.11)
>grunt
Running "jscs:src" (jscs) task
>> 156 files without code style errors.
Running "jshint:source" (jshint) task
✔ No problems
Running "jshint:tests" (jshint) task
✔ No problems
Running "tslint:source" (tslint) task
>> 11 files lint free.
Running "clean:gen" (clean) task
Cleaning public_gen...OK
Running "copy:public_to_gen" (copy) task
Created 122 directories, copied 553 files
Running "less:src" (less) task
File public_gen/css/bootstrap.dark.min.css created.
File public_gen/css/bootstrap.light.min.css created.
File public_gen/css/bootstrap-responsive.min.css created.
Running "concat:cssDark" (concat) task
File public_gen/css/grafana.dark.min.css created.
Running "concat:cssLight" (concat) task
File public_gen/css/grafana.light.min.css created.
Running "typescript:build" (typescript) task
42 files created. js: 14 files, map: 14 files, declaration: 14 files (968ms)
Done, without errors.
>go get github.com/Unknwon/bra
the above command did not give any output, nor an error message
bra run
it says -bash: bra: command not found
i tried to look for the resolution, but i could not find it. Please help
Recompile backend on source change
To rebuild on source change (requires that you executed godep restore)
go get github.com/Unknwon/bra
bra run
Running Grafana Locally
You can run a local instance of Grafana by running:
./bin/grafana-server
You must have missed this step!
go get github.com/Unknwon/bra
You can install Grafana using home brew.
brew update
brew install grafana
This sounds like an issue where Go is just being installed to build something else (for me, it was Grafana). In which case $GOPATH/bin is not in your PATH. $GOPATH/bin/bra should work. It did for me.
I suggest you installing Grafana inside Docker. If you install Docker for Mac, the GUI (Kitematic) will allow you to install grafana as easily as one click. You will just need to create a new container with "+ New" button, search grafana through the exisiting image lists and click "Create"
Docker will download grafana and it will appear in the left sidebar: