I'm trying to get data from ALL_TRIPS Scope. I'm running into a few issues.
1) once I add the Scope.All_Trips to the .setScopes I get redirected verse being able to login to obtain the Token, therefore I get the necessary data from the get CurrentRide() method.
configuration = new SessionConfiguration.Builder()
.setClientId(CLIENT_ID)
.setRedirectUri(REDIRECT_URI)
.setScopes(Arrays.asList(Scope.HISTORY, Scope.PROFILE, Scope.RIDE_WIDGETS, Scope.ALL_TRIPS))
.setEnvironment(SessionConfiguration.Environment.SANDBOX)
.build();
validateConfiguration(configuration);
Error: Webpage not available The webpage at
Market://details?hl-en&id=com.ubercab&referrer=mat_cli%3
And it goes on and one.
Once i remove the All_TRIPS SCOPE I get the ability to Sign in.
Any help would be great so that I can move forward with getting the details like driver, vehicle, RideID.
private void LoadAllTrips(){
Session session = loginManager.getSession();
RidesService AllTrips = UberRidesApi.with(session).build().createService();
AllTrips.getCurrentRide().enqueue(new Callback<Ride>() {
#Override
public void onResponse(Call<Ride> call, Response<Ride> response) {
if (response.isSuccessful())
{
Toast.makeText(LoginSampleActivity.this, response.body().getRideId(), Toast.LENGTH_LONG).show();
}
else
{
ApiError error = ErrorParser.parseError(response);
Toast.makeText(LoginSampleActivity.this, error.getClientErrors().get(0).getTitle(), Toast.LENGTH_LONG).show();
}
}
#Override
public void onFailure(Call<Ride> call, Throwable t) {
}
});
}
Related
What should I do if the error code 50005 is returned when querying the step count using the corresponding method under DataController? (The scopes of Health Kit I applied for from the Huawei Developers website have been approved.)
2020-05-26 11:41:21.195 17338-17338/com.hauwei.hmsdemo I/DataManager:
read failure 50005:Unknown authorization error
2020-05-26 11:41:21.203 17338-17338/com.hauwei.hmsdemo I/DataManager:
The following lines are used for querying the step count:
public void readSteps(View view) throws ParseException {
DataCollector dataCollector = new DataCollector.Builder().setPackageName(context)
.setDataType(DataType.DT_CONTINUOUS_STEPS_DELTA)
.setDataStreamName("STEPS_DELTA")
.setDataGenerateType(DataCollector.DATA_TYPE_RAW)
.build();
SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");
Date startDate = dateFormat.parse(BEGIN_TIME);
Date endDate = dateFormat.parse(END_TIME);
ReadOptions readOptions = new ReadOptions.Builder().read(dataCollector)
.setTimeRange(startDate.getTime(), endDate.getTime(), TimeUnit.MILLISECONDS)
.build();
dataController.read(readOptions).addOnSuccessListener(new OnSuccessListener<ReadReply>() {
#Override
public void onSuccess(ReadReply readReply) {
……
}
}).addOnFailureListener(new OnFailureListener() {
#Override
public void onFailure(Exception e) {
……
}
});
}
There is nothing wrong with the lines you used for querying the step count. The issue lies within authorization granting. It should be noted that the data that an app can access must be within the scopes granted to the app on the Huawei Developers website and within the range of data for which the user approval has been granted on the device side.
Regarding this issue, verify that the read/write permissions for the step count data have been granted when the app is displaying the data authorization screen.
You can refer to the following code, or refer to the sample code for Health Kit at
https://developer.huawei.com/consumer/en/doc/development/HMS-Examples/healthkit_Android_sample_code.
private void dataAuthorization() {
Log.i(TAG, "begin sign in");
// The data that can be used here and its read/write permissions can only be those you have applied for from the Huawei Developers website.
List < Scope > scopeList = new ArrayList < > ();
scopeList.add(new Scope(Scopes.HEALTHKIT_STEP_BOTH));
HuaweiIdAuthParamsHelper authParamsHelper =
new HuaweiIdAuthParamsHelper(HuaweiIdAuthParams.DEFAULT_AUTH_REQUEST_PARAM);
HuaweiIdAuthParams authParams =
authParamsHelper.setIdToken().setAccessToken().setScopeList(scopeList).createParams();
final HuaweiIdAuthService authService =
HuaweiIdAuthManager.getService(this.getApplicationContext(), authParams);
Task < AuthHuaweiId > authHuaweiIdTask = authService.silentSignIn();
authHuaweiIdTask.addOnSuccessListener(huaweiId - > {
......
}).addOnFailureListener(new OnFailureListener() {
#Override
public void onFailure(Exception exception) {
......
}
});
}
I need to share a message on Facebook in my windows phone App by clicking share button. when click share button , if user has not logged in to Facebook, first we redirect to log in screen and then need to ask permission to publish.
public partial class FacebookLoginPage : PhoneApplicationPage
{
string uriToLaunch ;
// Create a Uri object from a URI string
Uri uri = null;
public FacebookLoginPage()
{
InitializeComponent();
uriToLaunch = #"fbconnect://authorize?client_id={AppID}&
scope=public_profile,publish_actions,read_stream&
redirect_uri=msft-{ProductId}%3a%2f%2fauthorize";
uri = new Uri(uriToLaunch);
this.Loaded += FacebookLoginPage_Loaded;
}
private void FacebookLoginPage_Loaded(object sender, RoutedEventArgs e)
{
DefaultLaunch();
}
// Launch the URI
async void DefaultLaunch()
{
// Launch the URI
var success = await Windows.System.Launcher.LaunchUriAsync(uri);
if (success)
{
// URI launched
}
else
{
// URI launch failed
}
}
}
I used above code , but permission screen not appears for publish. Output was as follows.
I followed example and used an AppId, then it works well. I feel that there is special configuration in Facebook App side . Please help me If anyone have idea about it.
I am trying to upload an image to Google Drive using Google Picker user interface. So far i have been unsuccessful.
This is the code that i am using :
private void onCreatePicker(ViewId viewId) {
final Picker picker = PickerBuilder.create()
.setTitle("Subir imagen a Google Drive")
.addView(viewId)
.addView(DocsUploadView())
.setLocale("es")
.setOAuthToken(token_oauth2)
.setDeveloperKey(DEVELOPER_KEY)
.setCallback(buildPickerCallback(viewId))
.build();
picker.setVisible(true);
}
private JavaScriptObject DocsUploadView() {
return com.ip.gae.gartla.shared.DocsUploadView.create();
}
I request your help on what could i be missing.
Thank you for your time,
Regards,
UPDATE: It seems that my application scope was wrong. In order to generate the correct oAuth2Token, you must declare the scope which you want to generate the token for:
The following its the method I am using to generate the token:
private void tokenOauth2() {
AuthRequest req = new AuthRequest(AUTH_URL, CLIENT_ID)
.withScopes(GOOGLE_DRIVE_SCOPE); // Can specify multiple scopes here
Auth.get().login(req, new Callback<String, Throwable>() {
#Override
public void onSuccess(String token) {
token_oauth2 = token;
}
#Override
public void onFailure(Throwable caught) {
// The authentication process failed for some reason, see caught.getMessage()
}
});
}
And here it is the GOOGLE_DRIVE_SCOPE variable that i am using:
String GOOGLE_DRIVE_SCOPE = "https://www.googleapis.com/auth/drive";
So, for now this is working for me. I have attached the solution so if someone finds it out interesting enough. :-)
How can I show a success message and then redirect the user to another page after a timeout of e.g. 5 seconds?
I need this for the login page after a successful login. I tried the following and I can see the warning message on login failure, but not the success message on login success. It shows immediately the target page.
public String check(){
if (username.equals("test") && password.equals("test")) {
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(FacesMessage.SEVERITY_INFO,"Sample info message", "PrimeFaces rocks!"));
return "Success";
}else{
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(FacesMessage.SEVERITY_WARN,"Sample warn message", "Watch out for PrimeFaces!"));
return "Failure";
}
}
I'm using Seam's PageFlow for navigation.
I have a
<p:messages id="messages" showDetail="true" autoUpdate="true" closable="true" />
on the login page.
It is one of the utilities of Flash. Instead of
FacesContext.getCurrentInstance().addMessage(null, new FacesMessage(FacesMessage.SEVERITY_INFO,"Sample info message", "PrimeFaces rocks!"));:
simply use this code
FacesContext facesContext = FacesContext.getCurrentInstance();
Flash flash = facesContext.getExternalContext().getFlash();
flash.setKeepMessages(true);
flash.setRedirect(true);
facesContext.addMessage(null, new FacesMessage(FacesMessage.SEVERITY_INFO,"Sample info message", "PrimeFaces rocks!"));
First of all, with the code you posted you won't see the FacesMessage before the redirect, you'll see it after the redirect. But also, in order to make that happen you'll need to add a filter, because messages are lost when you redirect. This is the code for the filter you need (don't forget to declare it in web.xml):
public class MultiPageMessagesSupport implements PhaseListener {
private static final long serialVersionUID = 1250469273857785274L;
private static final String sessionToken = "MULTI_PAGE_MESSAGES_SUPPORT";
#Override
public PhaseId getPhaseId() {
return PhaseId.ANY_PHASE;
}
/*
* Check to see if we are "naturally" in the RENDER_RESPONSE phase. If we
* have arrived here and the response is already complete, then the page is
* not going to show up: don't display messages yet.
*/
#Override
public void beforePhase(final PhaseEvent event) {
FacesContext facesContext = event.getFacesContext();
int msg = this.saveMessages(facesContext);
if (PhaseId.RENDER_RESPONSE.equals(event.getPhaseId())) {
if (!facesContext.getResponseComplete()) {
this.restoreMessages(facesContext);
}
}
}
/*
* Save messages into the session after every phase.
*/
#Override
public void afterPhase(final PhaseEvent event) {
if (event.getPhaseId() == PhaseId.APPLY_REQUEST_VALUES ||
event.getPhaseId() == PhaseId.PROCESS_VALIDATIONS ||
event.getPhaseId() == PhaseId.INVOKE_APPLICATION) {
FacesContext facesContext = event.getFacesContext();
int msg = this.saveMessages(facesContext);
}
}
#SuppressWarnings("unchecked")
private int saveMessages(final FacesContext facesContext) {
List<FacesMessage> messages = new ArrayList<FacesMessage>();
for (Iterator<FacesMessage> iter = facesContext.getMessages(null); iter.hasNext();) {
messages.add(iter.next());
iter.remove();
}
if (messages.isEmpty()) {
return 0;
}
Map<String, Object> sessionMap = facesContext.getExternalContext().getSessionMap();
List<FacesMessage> existingMessages = (List<FacesMessage>) sessionMap.get(sessionToken);
if (existingMessages != null) {
existingMessages.addAll(messages);
} else {
sessionMap.put(sessionToken, messages);
}
return messages.size();
}
#SuppressWarnings("unchecked")
private int restoreMessages(final FacesContext facesContext) {
Map<String, Object> sessionMap = facesContext.getExternalContext().getSessionMap();
List<FacesMessage> messages = (List<FacesMessage>) sessionMap.remove(sessionToken);
if (messages == null) {
return 0;
}
int restoredCount = messages.size();
for (Object element : messages) {
facesContext.addMessage(null, (FacesMessage) element);
}
return restoredCount;
}
}
If this doesn't work for you, and you need to show the message before, then you'll have to something like the following: make the method return void, invoke it through ajax, and after adding the success message invoke some javascript method that will wait a couple of seconds and then make the redirect (maybe by programmatically clicking a hidden button that redirects to next page).
In my opinion this is not worth the trouble, you will just delay the login process. Anyway user will know tha tlogin succeeded because he will be redirect to home page (or whatever page you send him to)
EDIT:
the messages are displayed in the page when the method finishes, so waiting in the managed bean method won't work. after adding the FacesMessage, use
RequestContext.getCurrentInstance().execute("waitAndRedirect()");
And in your xhtml, you'll need to have a javascript function similar to this:
function waitAndRedirect() {
setTimeout(function() {
hiddenButtonId.click();
}, 2000);
}
where hiddenButtonId is the ID of a p:button which redirects to home page and is hidden (display:none)
But again, this a nasty approach, in my opinion there's no need to do this, you will just delay the login process.
you can not declare MultiPageMessagesSupport in the web.xml you must declare MultiPageMessagesSupport in the faces-config.xml. por example:
enter code here
<lifecycle>
<phase-listener>your.package.MultiPageMessagesSupport</phase-listener>
</lifecycle>
We are facing one problem with facebook.
we integrated FB in our web application, when user login through fconnect in our web application then he registered with our system(1st time only) just providing his email id.For normal user few user i/p for registration in our system
Our web-application developed in java [GWT2.0].
Problem is when FACEBOOK or normaluser login through FB in our web-application.( 1 at a time)
when user refreshes page then FB pop window Occues with message
"Debug: Exception while loading FB.apiClient TypeError: $wnd.FB.Facebook is undefined"
or sometimes $wnd.FB.Facebook.apiClient is null occures
we get above error[pop-up] message 3 times.
we used following script in html page
< script type="text/javascript" language="javascript"
src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php">
In only 1 page of our web-application i.e UserHome page where we display users info .
on that page only above error message occurs
We used following GWT Code [from Gwittit] In controller class[Singleton class ]
/**
* Function get called when all the data on first page get loaded.
*
* */
public void notifyFinishedLoadinPage() {
FacebookConnect.waitUntilStatusReady(new
RenderAppWhenReadyCallback());
}
private MyLoginCallback
loginCallback = new MyLoginCallback();
class MyLoginCallback implements LoginCallback {
public void onLogin() {
isFacebookSign = true;
fbLoggedInUserId = ApiFactory.getInstance().getLoggedInUser();
for (FacebookObserver Observer : facebookObservers) {
Observer.notifyFacebookLogin(true);
}
}
}
public void publishStream(final FacebookObserver fbObserver) {
FacebookConnect.init(FacebookConstants.FACEBOOK_API_KEY,
"xd_receiver.htm", loginCallback);
FacebookConnect.requireSession(new
AsyncCallback() {
public void onFailure(Throwable caught) {
Window.alert("Require session failed: " + caught);
GWT.log("Require session failed: " + caught, null);
}
public void onSuccess(Boolean isLoggedIn) {
if (isLoggedIn) {
for (FacebookObserver Observer :
facebookObservers) {
Observer.notifyPublishStream();
}
}
}
});
}
public void facebookConnection() {
FacebookConnect.init(FacebookConstants.FACEBOOK_API_KEY,
"xd_receiver.htm", loginCallback);
//SERVER
FacebookConnect.requireSession(new
AsyncCallback() {
public void onFailure(Throwable caught) {
GWT.log("Require session failed: " + caught, null);
}
public void onSuccess(Boolean isLoggedIn) {
if (loginCallback != null && isLoggedIn) {
loginCallback.onLogin();
} else {
//User not logged in
}
}
});
}
/**
* Fired when we know users status
*/
private class RenderAppWhenReadyCallback implements
AsyncCallback {
public RenderAppWhenReadyCallback() {
FacebookConnect.init(FacebookConstants.FACEBOOK_API_KEY,
"xd_receiver.htm", loginCallback);
//SERVER
}
public void onFailure(Throwable caught) {
Window.alert("Unable to login through Facebook: " + caught);
}
public void onSuccess(ConnectState result) {
if (result == ConnectState.connected) {
isFacebookSign = true;
for (FacebookObserver Observer : facebookObservers) {
Observer.notifyFacebookLogin(true);
}
//History.newItem(HistoryConstants.USERHOME_PAGE_HISTORY_TOKEN);
} else {
//rightSideFlexTable.clearCell(0, 0);
//rightSideFlexTable.setWidget(0, 0,
facebookPanel);
isFacebookSign = false;
}
}
};
Now we unable to found solution to this problem.
Can any one help Us to solve this problem ASAP
Hope-for the Best Co-operation
we found solution for above Question.
Facebook (login)loading requires few time.
In Our web page we fetch fb details like fb users loggedInId ,Image,etc.
so at the time of page loading we get all values null because facebook not load properly
so we get $wnd.FB.Facebook.apiClient is null or
Debug: Exception while loading FB.apiClient TypeError: $wnd.FB.Facebook is undefined"
To solve this problem we write one method which calls when user refreshes page or after facebook loading done properly.
public void notifyFacebookLogin(boolean isLogin) {
Long fbLoggedInUserId = ApiFactory.getInstance().getLoggedInUser();
if (fbLoggedInUserId != null) {
if (globalEndUserInfo == null) {
globalEndUserInfo = new EndUserInfo();
globalEndUserInfo.setFbLoggedInUserId(fbLoggedInUserId);
}
}
// code wherever we deal with FB related object
}
Now no error message display when user refreshes page or if fb takes time to loading
In this way we solve our Problem. :)