I have VS Code 1.15.1 and when I work at two projects at once, I choose File -> New Window and open the second project. Clicking File -> New Window opens new window with VS Code.
On my other computer (not sure about the VS Code version there), when I click File -> New Window, instead of opening new window, it will rather open new tab, so that I end up with two tabs in one window, each tab for one project and the active tab occupies whole screen estate.
Any ideas what should I change in Settings to achieve this "single window, multiple tabs" layout when having multiple projects?
I use macos (not sure if OS may be somehow related to the window management settings)
Go to Preferences > Settings.
Search for native tabs
Check the checkbox
Code will prompt for restart to take effect.
After restart, make sure you have multiple projects open. And then merge all windows as shown below:
Enjoy multiple tabs in single window.
Note: I think this applies to all Mac OS >= Sierra. Tested with Catalina, Big Sur recently.
Just set in your user settings
"window.nativeTabs": true
and do Window -> Merge All Windows
note: If you have High Sierra installed, that might be an issue.
Here's the link:
Better macOS native window tabs support
In Mac OS, there is a system setting outside of VS Code. Set this and then opening files/folders from the command line will also automatically open the file/folder in a new tab instead of a new window.
In MacOS 12.3 (Monterrey) this is under:
System Preferences > General > Prefer tabs ____ when opening documents.
Change this setting to always. (The default is in full
screen).
You might additionally need to set the setting in VS Code "window.nativeTabs": true as the other commenters have already suggested.
Related
VS Code was docking devtools pane within the window before. Now, It opens a new window that increases back and forth. Is there any way to dock it back? I tried a few settings they did not work. Also, there is no dock icon as in Chrome.
This started with vscode v1.74 and is an electron bug. See The developer tools become a floating window.
There is a fix reported there. Disable the setting
Windows > Experimental > Windows Control Overlay: Enabled
You will be prompted to restart vscode and then opening the Dev Tools will be docked as before. Apparently, the Electron bug has been fixed.
In the devtools panel, click the vertically-aligned three dots at the top right. That will open up a context menu. You will see a "Dock side" entry with different icons signifying option values for that setting. You probably accidentally clicked the one that makes it pop the devtools out into its own window. Select whichever option you actually want there.
in VSCode is it possible to open the terminals in a separate window?
So far my research has pointed to a resounding NO but Im curious if anyone has a solution?
Move terminals between windows
It's now possible to move terminals between windows by detaching via
Terminal: Detach Session in one and attaching to another with
Terminal: Attach to Session. In the future this should help enable
cross-window drag and drop!
Lots of changes in v1.58: https://github.com/microsoft/vscode-docs/blob/vnext/release-notes/v1_58.md#terminals-in-the-editor-area
For v1.59 moving the terminal changes - including dragging and dropping onto another window, see https://github.com/microsoft/vscode-docs/blob/vnext/release-notes/v1_59.md#drag-and-drop-terminals-across-windows
Drag and drop terminals across windows
Drag terminals from the tabs
list or editor area of one window into the tabs list, editor area, or
panel of another window.
Terminals in the editor area
Terminals can now be created in or moved to the editor area, enabling a multi-dimensional grid layout that persists and remains visible regardless of panel state.
To use terminals in the editor area, there are several options:
Create via the Create Terminal in Editor Area command.
Move a terminal from the panel to the editor by dragging and dropping from the tabs list.
Running Move Terminal into Editor Area with a terminal focused.
Moving into the editor area via the terminal tab context menu action.
The new terminal.integrated.defaultLocation setting can be set to editor to direct newly created terminals to the editor area by default.
Please Try:
File > Open New Window
Ctrl+Shift+P > Terminal: Create New Terminal in Editor Area
You can add keybinding to the commands as per your convenience.
i think that the OP wants to create a separate window for the terminal but still have the separated terminal linked to the code editor in the original window (that's what i want too). so that when you run the code in the editor the output is shown in the terminal in the separate window. but if you simply open up a new window of vscode and either open a terminal there or drag and drop the terminal from the original window into the new window, the new terminal is not the same session of the terminal. it is a separate independent unconnected terminal. running the code in the editor does not show output in the new separate terminal. all you have achieved is creating a new unconnected terminal. which you could have just accomplished by opening up a regular terminal window i.e. the one from windows os main menu, no need even to use vscode.
This answer is now outdated. See this answer for instructions on moving terminal panes between VS Code windows. This answer still works but is no longer a necessary workaround.
You can't detach the panes in VSCode, which IMO is a bit of a pain since Visual Studio can detach panes all day long.
There is a workaround though, you can open a new window in VSCode and maximize the terminal pane in that window.
One reason you'd want to do this is to have the Python terminal on a second monitor while still being able to use Python interactively (shift+enter way). Attaching/detaching didn't work for me, nor can you open separate terminals.
What you can do is simply resize your one window across the screen borders! Then right click on the terminal tab/header and click Move panel to the left and voila!
Try Сtrl+Shift+c.
For me, it opens the folder the script is within in a command prompt window.
Create a new window by going to File → New Window.
Open up a new terminal inside of it.
Go to your folder (cd your\projectfolder\path).
And here you are, you have a terminal for your project inside it's own seperate window.
You can change the terminal to be side-by-side instead of below the editor. And then make your window very wide. It is almost as good as having two windows.
Right click on the TERMINAL tab.
Select "Move Views to Side Panel"
Make your window very wide
It seems VS Code allows you to detach the terminal window, but it then will not show the output from the editor of the window you detached it from.
I have spent a while searching, and there is really no workaround other than to just run whatever file you are trying to debug from a separate terminal from the same CWD. This also means you will need to save the file in the window you are editing the file in every time you want to run it. huge pain.
If you are using PowerShell inside the VSCode terminal, why don't you use the PowerShell console from the start menu. It's basically equivalent to using the terminal in separate windows. Hope it helps.Sample
I recently started using Visual Studio Code and I would like to know, is a way to open files in a new tab? Currently whenever I open a new file the files I currently have open disappear. I say new tab, but any option that will let me open a new file in the same window as the old one works.
I have tried disabling Preview Mode through the workbench settings as shown in this answer: How to config vscode to open files always in a new tab?. However, when I choose Open or Open Recent the new file still replaces my old file.
Thanks.
Once you have to open your settings file, add the "workbench.editor.enablePreview" property and set value to false.
For 1.21.1 version.
In user settings =>
"workbench.editor.enablePreview": false,
"workbench.editor.enablePreviewFromQuickOpen"
the best way i found.
Starting with VSCode 1.52 (Nov. 2020), you should not have any more issue: all files will open in new tabs, even in preview mode.
Better handling of preview editors:
Preview editors are now better handled with numerous improvements based on feedback and making this feature work more consistent.
The setting workbench.editor.enablePreviewFromQuickOpen is now disabled by default so that editors opening from quick open will not appear in preview mode anymore.
When you start a navigation (e.g. go to definition), the editor you start from will move out of preview mode to keep it open while the new editor will be in preview mode until you navigate further.
We changed all of our custom trees (the ones used from extensions or Git changes view for example) to work more consistently like our built-in trees (like the explorer).
This means, the following interactions now apply to all of them:
double-click or mouse-middle-click to open non-preview
Enter to open non-preview (Space to open in preview-mode)
Note: if you are the author of an extension that is leveraging our custom tree API, you can benefit from this change as well.
Make sure to use vscode.open or vscode.diff commands for the TreeItem.command and you are in!
A new menu item in the editor overflow menu allows to quickly turn off preview editors altogether:
You need to double click on the name of the file. Also, it needs to be done swiftly elsewhere you will be opening in the same tab.
You can drag and drop file near to the opened tab and the file will open in new tab.
Thanks everyone. Double clicking and dragging was useful, but it still didn't solve my problem when opening files from different projects with the "Open File" menu command. I found that Multi-root Workspaces is what I was looking for. https://code.visualstudio.com/docs/editor/multi-root-workspaces
This is likely due to Visual Studio Code opening file in what's called "Preview Mode", which allows you to quickly view files, ideally if a tab is in Preview Mode then its title in the tab bar, will be italic.
To disable Preview Mode set "workbench.editor.enablePreview": false in your settings file or use the "workbench.editor.enablePreviewFromQuickOpen" option to disable it only from the quick open menu.
Alternatively, use command palette CTL+Shift+P (to get all settings) VScode settings then in User => Workbench => Editor Management you can uncheck Enable Preview and Enable Preview from Quick Open to get the same results described above
Like in the topic - is there any default way or any plugin that lets you have multiple 'Compare' windows open and active at the same time? I find it very frustrating that while doing changes to few files at the same time, I can't have active 'Compare' window for each of them, to see my changes/original code.
I would use Window -> New Window, rerun Team -> Show History and then compare another file.
A compare window in Eclipse is placed inside a normal editor tab.
You can have several editor tabs, including compare windows, visible at the same time. To do this just drag the editor tab (the one on the top with the editor name) to somewhere inside the editor area. The editor area will get split in two, each one displaying one editor.
This works with more than two editors also.
If you find that you need more space for the compare windows because other views take up much space you can maximize the editor area by pressing Ctrl+M while the editor area has focus.
Example:
Go to preferences -> team -> General Team Preferences. For me, the "Reuse open compare editors when opening comparisons" was already checked by default. I unchecked that and now I can have multiple file comparison windows open! (I'm using Eclipse Oxygen.3a -- 4.7.3a)
I use dual monitor for work and I prefer to have the editor on my main screen while the rest of eclipse in my laptop monitor.
However, when I open a new file, that is. I open a file with Cmd-Shift-R, files are opened in my laptop monitor as opposed to the editor that I dragged to my main screen.
I find this mildly annoying. Any ideas?
Are using the Window -> New Window feature? In that case it depends on which window you're working on at the time you press Ctrl+Shift+R.
However, if you're streching only one Eclipse window along both monitors, then the Open Resource dialog will be opened in your "monitor number 1" (and that depends on your graphic configuration: Laptop+Main or Main+Laptop).
I found easier to avoid the new window menu and just to drag those views out of eclipse. This creates a secondary window but the project explorer is linked to the old window so double click will open the file on the main window.
I recommend to save everything as a new perspective that I usually call "Java 2 Windows". This way I can change perspectives when I do not have an auxiliar screen.
P.S. Just avoid closing the auxiliar window when leaving eclipse.