I'm a complete newbie to coding, so I don't understand most of the similar posts on this forum.
I'm doing a simple C programming course, and I need to run a notepad++ file from the Powershell. The file only contains this:
#include <stdio.h>
int main()
{
int num = 931;
printf("The number 'num' is %d\n", num);
return 0;
}
I called the file: Variables.c then I put this into the Powershell:
PS C:\Users\Raven\Desktop\C Programming> gcc Variables.c -o Variables.exe
Followed by:
PS C:\Users\Raven\Desktop\C Programming> Variables.exe
I then get the following error:
Variables.exe : The term 'Variables.exe' is not recognized as the name of a cmdlet, funct ion, script file, or operable program. Check the spelling of the name, or if a path was i ncluded, verify that the path is correct and try again. At line:1 char:1
+ Variables.exe
+ ~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Variables.exe:String) [], CommandNotFound Exception
+ FullyQualifiedErrorId : CommandNotFoundException
What is going on here??
Many thanks in advance!
To run an exe in PowerShell you need to either provide the full path to the exe or the relative path by preceding the filename with .\ Ensure you are in the correct directory and try:
.\Variables.exe
The case is you are using windows powershell. You can execute that fileName.exe command in windows cmd (in the exe file stored path).
Related
I am trying to generate a MachineKey for my application using the PowerShell script found in kb2915218.
I have copied the function into notepad and saved as a .PS1 file. Now if I look at this file through explorer it is being recognised as a PowerShell file.
I then have run PowerShell and CD to the directory of my .PS1 file.
I then ran the following command:
Set-ExecutionPolicy Unrestricted
followed by:
.\Powershell-Generate-MachineKey.ps1
(the name of my script). And finally I then tried running the command
Generate-MachineKey
However I get the message:
Generate-MachineKey : The term 'Generate-MachineKey' is not recognized as the
name of a cmdlet, function, script file, or operable program. Check the spelling
of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:1
+ Generate-MachineKey
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Generate-MachineKey:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Can someone please tell me where I am going wrong here?
The script just defines a function, so if you execute it like this:
.\Powershell-Generate-MachineKey.ps1
it won't do anything, because the function isn't invoked anywhere and also isn't made available in the current context. For the latter you need to dot-source the script
. .\Powershell-Generate-MachineKey.ps1
The dot-operator basically executes the script in the current context instead of a child context. That way the definitions from the script become available in the current context, and you can invoke the function like this:
Generate-MachineKey
I am trying to convert some a number of files compressed into a .tar.gz archive into a single file. To do so I need to first untar the file.
I have a copy of 7z.exe loaded into the directory, and calling the command locally works
.\7z.exe x *.tar.gz
I've uploaded the exe into the wwwroot/poshUntar directory alongside the run.ps1 file that gets executed, and using the online editor I can execute the powershell script. I would of course expect my function to fail generally since I'm not providing the variable values but I would not expect it to error about finding the 7z.exe file
.\7z.exe : The term '.\7z.exe' is not recognized as the name of a cmdlet,
function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At D:\home\site\wwwroot\poshUntar\run.ps1:10 char:1
+ .\7z.exe x *.tar -o logs
+ ~~~~~~~~
+ CategoryInfo : ObjectNotFound: (.\7z.exe:String) [], CommandNot
FoundException
+ FullyQualifiedErrorId : CommandNotFoundException
What is the correct way to invoke an executable inside a PowerShell Azure Function?
I believe that you also need to upload 7z.dll into the wwwroot directory.
Could you try using the following code-segment in your script?
Set-Location D:\home\site\wwwroot\poshUntar
.\7z.exe x *.tar.gz
.\7z.exe x *.tar -ologs
My goal is to create a PowerShell script, which would open specific directories in Windows Explorer.
Some of the directories could be referenced through the environment-variables.
However I got a problem with the following command
ii %programfiles(x86)%
Execution returns the following error:
The term 'x86\' is not recognized as the name of a cmdlet, function, script
file, or operable program. Check the spelling of the name, or if a path was
included, verify that the path is correct and try again.
At line:1 char:23
+ ii %programfiles\(x86\ <<<< )%
+ CategoryInfo : ObjectNotFound: (x86\:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Can you kindly explain to me, what I'm doing incorrectly here?
%variable% is batch notation. In PowerShell you have to use $env: to access environment variables.
Invoke-Item ${env:ProgramFiles(x86)}
The curly brackets are required, because without them the parentheses wouldn't be recognized as part of the variable name.
I have installed SQLite3 on my computer in G:\SQLite3\sqlite3.exe
However, when I type "sqlite3" (no quotes) to PowerShell, it gives me the following error:
sqlite3 : The term 'sqlite3' is not recognized as the name of a cmdlet, functio
n, script file, or operable program. Check the spelling of the name, or if a pa
th was included, verify that the path is correct and try again.
At line:1 char:1
+ sqlite3
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (sqlite3:String) [], CommandNotF
oundException
+ FullyQualifiedErrorId : CommandNotFoundException
My Environmental Path includes G:\SQLite3, so when I run sqlite3 in command prompt (cmd.exe), it runs just fine. I prefer PowerShell though, so I would be glad, if someone could point me in the right direction how to make it accept this command. If that matters, I use Windows 8.
Most likely the directory G:\SQLite3 is not in your PATH environment variable, so PowerShell doesn't know where to look for the executable. Either run the executable with its full path, or add the directory to the $env:PATH:
$env:PATH += ';G:\SQLite3'
& sqlite3.exe
I've just installed PHP & Yii Framework. It works fine, I played with CMD. But after a while I switched to PowerShell ISE. I navigated to Yii folder:
cd C:\dev\yii-1.1.9.r3527\framework
and I issued command:
yiic.bat
and I get an error:
PS C:\dev\yii-1.1.9.r3527\framework> yiic.bat
The term 'yiic.bat' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:9
+ yiic.bat <<<<
+ CategoryInfo : ObjectNotFound: (yiic.bat:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
However when I type:
./yiic.bat
into PowerShell window, it works fine.
Is there a way to aviod typing ./ every time I run a bat file?
The framework directory you're trying to run the batch file from is evidently not in your path. When you type yiic.bat into the shell, it looks for that file in the list of directories contained in your path environment variable. See this question for information about how to set your path in powershell.
For example, if you want to be able to run batch files in the C:\dev\yii-1.1.9.r3527\framework directory, you can say $env:Path = $env:Path + ";C:\dev\yii-1.1.9.r3527\framework".
Or, as mloskot says, you can just add the current directory to your path, though that can pose a minor security risk. See e.g. this question for a bit of discussion on that.
this is an old question, but I stumbled on it looking for something else.
Powershell requires you to type .\ to run commands in the current by design.
https://blogs.technet.microsoft.com/csps/2010/06/06/introduction-to-windows-powershell-scripting/
I don't have PowerShell to try this out, but if you set the path to include current folder, this should work:
$env:Path = $env:Path + ";."