I have a report with the following parameters: Start Date, End Date, Group 1, Group 2. What I am trying to accomplish is to do a parameter dependency on Group 2 meaning if I select Group 1 parameter for Customer service, it will only show list of Group 2 parameter related to Customer service.
I tried to create a parameter for Customer Service and Sales then created a calculated field that when a value is selected Group 2 parameter is automatically refreshed, but epic fail. I created a calculated field using this code, but didn't work at all. IF [Group1] ="Customer Service" THEN [CS] ELSEIF [Group1]="Sales" THEN "SL" END Note that the 'CS' and 'SL' are the parameters I created containing the Group 2 drop down list below. Please advise.
Sounds like these need to be filters instead of parameters. Show the quick filter for Group 1. Show the filter for Group 2. In the Group 2 quick filter settings, choose Only Relevant Values. That way the group 2 will only list values based on what you select for group 1.
This is absolutely possible through CASE functions
Although note this about fields and parameters, parameters determine the fields or the values in the fields to show. You can't have a formula that returns a parameter
To me this doesn't make sense:
IF [Group1] ="Customer Service" THEN [CS] ELSEIF [Group1]="Sales" THEN "SL" END
The reason being that your THEN is a parameter, not a field
A simple way of doing this is:
1) You need 1 parameter for group 1 with string values for Customer Service and Sales
2) You then need to make a field for each value you want to group. Example of the field "IF [Group 2] CONTAINS("CS REGION") IS TRUE THEN [Group 2] END"
For the Sales field: "IF [Group 2] CONTAINS("Sales") IS TRUE THEN [Group 2] END"
Here is an example of the field to plug into the table using parameters that works correctly:
CASE [Group parameter]
WHEN "Customer Service" THEN "Group 2 CS field"
WHEN "Sales" THEN "Group 2 Sales field"
END
Related
I have created a parameter using Tableau 10.2 on one of my data field name as
"Region". This is a string and i have selected a list option.
To call this i have created 2 calculated fields:
[Group Highlight] this is one calc field which has name of my parameter.
The other calculated field is
CASE [Group Highlight]
WHEN [Assigned Group] THEN [Group Highlight ] ELSE "Others" END
What i am trying to do when a user selects a specific group that region/group should appear in separate color when i will place this field on color by option. However i only get Others.
What I would like to do is either suppress a group or (if possible) write this in to a selection record.
The goal would be to display all records in the group if any one of the records in the group meet the requirements.
For example if my group has three records and my requirement is that one of the records have a specific value in one field. Then display all three records in that group. Otherwise, if none of the three have that value then suppress the group.
I know where I need to put the formula and I thought the following would work but instead it only gave me the records that met the requirement not the others that accompany it.
Placed in the suppress group formula field:
if {table.field} <> "1" then true else false
Any thoughts on this?
Looks like I got it figured out. Here's what I did:
Create a Formula Field to check if the value exists in the record as follows:
if {table.field} = "X" then 1
Create a Summary Field of the formula field just created and sum the total for the formula field effectively counting how many records in that group have the value sought after.
Go to Section Expert for the desired group and Suppress using the following formula.
if Sum ({#Formula}, {table.field_2}) < 1 then true
I have a report which lists all employee timesheets (grouped). Each employee will have a record for each day (5 records in total) per group. I want to suppress ALL records for a employee if ANY of the 5 records has a value in a particular field (called "uniqueAttachID").
Basically, if the "uniqueAttachId" is blank, it tells me that the record does not have an attachment and I want to see all employees where this is the case. The attachment can be added to ANY of the 5 records therefore, if ANY of the records HAS data is this field, then I want the whole section of the group suppressed.
You can use below trick to achieve your requirement,
1] create a summary on uniqueattachedID across the group. This summary will give you sum of uniqueattachedID column. Suppress this summary.
2] Now go to the Section Expert of the group. Write formula for Suppress.
3] In formula you will write
if summary column (select this from reports field) > 0 then true
else false
I hope this helps!
If you want to suppress ALL records (Group and Detail), you will have to go into Section Expert, and in the suppress formula for each section of your report that you want to suppress, you enter
uniqueAttachID <> ""
That will suppress each section if uniqueAttachID has a value. You may need to adjust the formula if uniqueAttachID is a numeric field.
I want to create multiple groups in ireport, and the data should display in a group-wise manner.For Eg:
First the Group1 data should be printed completely, then,
Group1:
Module Data
After this i want to print the Group2 data completely
Group2:
Category data
I am using the Result Set datasource.
Can Someone help me in this?
Jasper reports will work exactly in this manner as long as your query results are ordered properly.
For example, let's say you are grouping by a field called "MY_GROUP" and it has values "GROUP A" and "GROUP B". In your report you will create a group for field "MY_GROUP". In your query, make sure you have MY_GROUP as the first field in your ORDER BY clause. You can also accomplish this in iReports by adding the "MY_GROUP" field as your the first field in the Sort Options section of the Report query.
Now that you have added your group and are ordering properly your results will come out like this:
Header - GROUP A
Detail - GROUP A
Footer - GROUP A
Header - GROUP B
Detail - GROUP B
Footer - GROUP B
Exactly as you wish. My guess is that you were not properly ordering your query results. This could result in having multiple groupings for GROUP A, GROUP B, etc. all interspersed.
If groups in iReport don't keep all the data together, use subreports. When Jasper gets to a subreport, it runs the whole subreport and puts the whole thing into the report. You could have something like:
Subreport 1 - Group 1
Group 1 first record
Group 1 second record
Group 1 third record
...
Group 1 last record
Subreport 2 - Group 2
Group 2 first record
Group 2 second record
Group 2 third record
...
Group 2 third record
It's exactly as Tom said. Jasper Reports Groups do not order the data retrieved from the query, they just take it in the order it comes.
In order to display the information in a group-wise manner, you have to add an ORDER BY to the query so the rows the report receives are already ordered.
So there is an issue that happens when you use multiple group headers. The first header behaves like expected ordered by Column Value A only on unique values. The 2nd header using Column Value B will print on every row despite being non-unique values.
In theory you should be able to use ORDER BY:
ORDER BY ValueA, ValueB
to properly display the report assuming you are using sql, plsql, etc... However, in my case that did not happen, though for others it seems to work.
Use subreports to attach the minor differences via unique reports. You create a root report with empty details. Then you create Unique reports to serve as sub reprots. Finally, you use the subreport element to link the values into the root report. Though that is a good bit of work and may cause repeat code.
A hacky way I used was: A mixture of "Print When Expressions" with logical boolean expressions with 2 group headers and a column header.
Boolean Expressions:
$F{QUERY}.equals(Query1) && ($P{P_Typequery}.equalsIgnoreCase("QueryA") && $P{P_parameter} == null)
and
$F{QUERY}.equals(Query1) && ($P{P_Typequery}.equalsIgnoreCase("P_QueryA") && $P{P_parameter} != null)
with two group headers and a column header. The column header will not repeat for every row so you assign one of the booleans expressions to it's "print when" so it does not always print. The first group header will not repeat for every row and works. The 2nd group header is used for the times you DO want it to repeat for every unique value since it always prints for every row, and you use the other boolean on it's "print when". Hope it helps
I have a report that shows items by goups.
Lets say he groups are:
In Inventory
In Process
When there is no data In Inventory, that row is not shown. any idea how to show a row with 0 inventory?
It sounds as though you are grouping on a field (such as stock item status), where there may be 0 rows returned for certain values of the field (such as In Inventory). The answer is to amend your query to right outer join to a lookup table holding all values of the grouping field, for example as follows:
select lu.status_value stock_item_status,
si.stock_item_status item_status,
si.stock_item_id,
coalesce(si.quantity,0) quantity
from stock_item si
right join stock_item_status lu
on si.stock_item_status = lu.status_value
This will now include a row returned for stock_item_status values with no corresponding stock_items, with null values for all of the stock_item fields.
If you were including a subtotal of stock_item.quantity values for each status, changing this to coalesce(...,0) should ensure that this null value is displayed as 0.
If I'm understanding you correctly, you've got a field {table.inventory} that holds the number of items in inventory that has a null value when the inventory is zero? When you group on this field you're not seeing the rows with null values in this field?
Crystal should still display those rows, just in a group with a null group name. To fix this you can go into the Group Expert -> Select the group in question -> Options -> Options tab -> Select 'customize group name field' -> and then specify a formula as a new group name field where you simply check to see
if isnull({table.inventory}) then 0 else {table.inventory}
Similarly, you can just create a formula that does this and group on that instead.