I'm trying to copy part of a line to append to the end:
ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1_IonXpress_024_genomic.fna.gz
becomes:
ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1/GCA_900169985_IonXpress_024_genomic.fna.gz
I have tried:
sed 's/\(.*(GCA_\)\(.*\))/\1\2\2)'
$ f1=$'ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1_IonXpress_024_genomic.fna.gz'
$ echo "$f1"
ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1_IonXpress_024_genomic.fna.gz
$ sed -E 's/(.*)(GCA_.[^.]*)(.[^_]*)(.*)/\1\2\3\/\2\4/' <<<"$f1"
ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1/GCA_900169985_IonXpress_024_genomic.fna.gz
sed -E (or -r in some systems) enables extended regex support in sed , so you don't need to escape the group parenthesis ( ).
The format (GCA_.[^.]*) equals to "get from GCA_ all chars up and excluding the first found dot" :
$ sed -E 's/(.*)(GCA_.[^.]*)(.[^_]*)(.*)/\2/' <<<"$f1"
GCA_900169985
Similarly (.[^_]*) means get all chars up to first found _ (excluding _ char). This is the regex way to perform a non greedy/lazy capture (in perl regex this would have been written something like as .*_?)
$ sed -E 's/(.*)(GCA_.[^.]*)(.[^_]*)(.*)/\3/' <<<"$f1"
.1
Short sed approach:
s="ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1_IonXpress_024_genomic.fna.gz"
sed -E 's/(GCA_[^._]+)\.([^_]+)/\1.\2\/\1/' <<< "$s"
The output:
ftp://ftp.ncbi.nlm.nih.gov/genomes/all/GCA/900/169/985/GCA_900169985.1/GCA_900169985_IonXpress_024_genomic.fna.gz
Related
I have this content in a file where I want to replace spaces at certain positions with pipe symbol (|). I used sed for this, but it is replacing all the spaces in the string. But I don't want to replace the space for the 3rd and 4th string.
How to achieve this?
Input:
test test test test
My attempt:
sed -e 's/ /|/g file.txt
Expected Output:
test|test|test test
Actual Output:
test|test|test|test
sed 's/ /\
/3;y/\n / |/'
As newline cannot appear in a sed pattern space, you can change the third space to a newline, then change all newlines and spaces to spaces and pipes.
GNU sed can use \n in the replacement text:
sed 's/ /\n/3;y/\n / |/'
If the original input doesn't contain any pipe characters, you can do
sed -e 's/ /|/g' -e 's/|/ /3' file
to retain the third white space. Otherwise see other answers.
You could replace the 'first space' twice, e.g.
sed -e 's/ /|/' -e 's/ /|/' file.txt
Or, if you want to specify the positions (e.g. the 2nd and 1st spaces):
sed -e 's/ /|/2' -e 's/ /|/1' file.txt
Using GNU sed to replace the first and second one or more whitespace chunks:
sed -i -E 's/\s+/|/;s/\s+/|/' file
See the online demo.
Details
-i - inline replacements on
-E - POSIX ERE syntax enabled
s/\s+/|/ - replaces the first one or more whitespace chars
; - and then
s/\s+/|/ the second one or more whitespace chars on each line (if present).
Keep it simple and use awk, e.g. using any awk in any shell on every Unix box no matter what other characters your input contains:
$ awk '{for (i=1;i<NF;i++) sub(/ /,"|")} 1' file
test|test|test test
The above replaces all but the last " " on each line. If you want to replace a specific number, e.g. 2, then just change NF to 2.
I'm trying to replace the text using the sed, but it's showing some error. Not getting where I'm getting wrong.
sed -i 's/process.env.REDIRECT_URI/http:\/\/test-domain.apps.io/\callback/g' input.txt
Have this :
process.env.REDIRECT_URI
Replace this with :
http://test-domain.apps.io
Try:
sed -i 's/process.env.REDIRECT_URI/http:\/\/test-domain.apps.io/g' input.txt
Notes:
The original command has a spurious string /\callback. All that was needed to make the code work was to remove it.
. is a wildcard. If you want to be sure that you are matching periods, they should be escaped:
sed -i 's/process\.env\.REDIRECT_URI/http:\/\/test-domain.apps.io/g' input.txt
Sometimes, its clearer if one doesn't have to escape /. One can use a separator of one's choice. For example, use #:
sed -i 's#process\.env\.REDIRECT_URI#http://test-domain.apps.io#g' input.txt
If you did want /callback in the output, use:
sed -i 's/process\.env\.REDIRECT_URI/http:\/\/test-domain.apps.io\/callback/g' input.txt
or:
sed -i 's#process\.env\.REDIRECT_URI#http://test-domain.apps.io/callback#g' input.txt
This is mostly by curiosity, I am trying to have the same behavior as:
echo -e "test1:test2:test3"| sed 's/:/\n/g' | grep 1
in a single sed command.
I already tried
echo -e "test1:test2:test3"| sed -e "s/:/\n/g" -n "/1/p"
But I get the following error:
sed: can't read /1/p: No such file or directory
Any idea on how to fix this and combine different types of commands into a single sed call?
Of course this is overly simplified compared to the real usecase, and I know I can get around by using multiple calls, again this is just out of curiosity.
EDIT: I am mostly interested in the sed tool, I already know how to do it using other tools, or even combinations of those.
EDIT2: Here is a more realistic script, closer to what I am trying to achieve:
arch=linux64
base=https://chromedriver.storage.googleapis.com
split="<Contents>"
curl $base \
| sed -e 's/<Contents>/<Contents>\n/g' \
| grep $arch \
| sed -e 's/^<Key>\(.*\)\/chromedriver.*/\1/' \
| sort -V > out
What I would like to simplify is the curl line, turning it into something like:
curl $base \
| sed 's/<Contents>/<Contents>\n/g' -n '/1/p' -e 's/^<Key>\(.*\)\/chromedriver.*/\1/' \
| sort -V > out
Here are some alternatives, awk and sed based:
sed -E "s/(.*:)?([^:]*1[^:]*).*/\2/" <<< "test1:test2:test3"
awk -v RS=":" '/1/' <<< "test1:test2:test3"
# or also
awk 'BEGIN{RS=":"} /1/' <<< "test1:test2:test3"
Or, using your logic, you would need to pipe a second sed command:
sed "s/:/\n/g" <<< "test1:test2:test3" | sed -n "/1/p"
See this online demo. The awk solution looks cleanest.
Details
In sed solution, (.*:)?([^:]*1[^:]*).* pattern matches an optional sequence of any 0+ chars and a :, then captures into Group 2 any 0 or more chars other than :, 1, again 0 or more chars other than :, and then just matches the rest of the line. The replacement just keeps Group 2 contents.
In awk solution, the record separator is set to : and then /1/ regex is used to only return the record having 1 in it.
This might work for you (GNU sed):
sed 's/:/\n/;/^[^\n]*1/P;D' file
Replace each : and if the first line in the pattern space contains 1 print it.
Repeat.
An alternative:
sed -Ez 's/:/\n/g;s/^[^1]*$//mg;s/\n+/\n/;s/^\n//' file
This slurps the whole file into memory and replaces all colons by newlines. All lines that do not contain 1 are removed and surplus newlines deleted.
An alternative to the really ugly sed is: grep -o '\w*2\w*'
$ printf "test1:test2:test3\nbob3:bob2:fred2\n" | grep -o '\w*2\w*'
test2
bob2
fred2
grep -o: only matching
Or: grep -o '[^:]*2[^:]*'
echo -e "test1:test2:test3" | sed -En 's/:/\n/g;/^[^\n]*2[^\n]*(\n|$)/P;//!D'
sed -n doesn't print unless told to
sed -E allows using parens to match (\n|$) which is newline or the end of the pattern space
P prints the pattern buffer up to the first newline.
D trims the pattern buffer up to the first newline
[^\n] is a character class that matches anything except a newline
// is sed shorthand for repeating a match
//! is then matching everything that didn't match previously
So, after you split into newlines, you want to make sure the 2 character is between the start of the pattern buffer ^ and the first newline.
And, if there is not the character you are looking for, you want to D delete up to the first newline.
At that point, it works for one line of input, with one string containing the character you're looking for.
To expand to several matches within a line, you have to ta, conditionally branch back to label :a:
$ printf "test1:test2:test3\nbob3:bob2:fred2\n" | \
sed -En ':a s/:/\n/g;/^[^\n]*2[^\n]*(\n|$)/P;D;ta'
test2
bob2
fred2
This is simply NOT a job for sed. With GNU awk for multi-char RS:
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' '/1/'
test1
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' 'NR%2'
test1
test3
test5
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS='[:\n]' '!(NR%2)'
test2
test4
test6
$ echo "foo1:bar1:foo2:bar2:foo3:bar3" | awk -v RS='[:\n]' '/foo/ || /2/'
foo1
foo2
bar2
foo3
With any awk you'd just have to strip the \n from the final record before operating on it:
$ echo "test1:test2:test3:test4:test5:test6"| awk -v RS=':' '{sub(/\n$/,"")} /1/'
test1
With sed, I can replace the first match in a line using
sed 's/pattern/replacement/'
And all matches using
sed 's/pattern/replacement/g'
How do I replace only the last match, regardless of how many matches there are before it?
Copy pasting from something I've posted elsewhere:
$ # replacing last occurrence
$ # can also use sed -E 's/:([^:]*)$/-\1/'
$ echo 'foo:123:bar:baz' | sed -E 's/(.*):/\1-/'
foo:123:bar-baz
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):/\1-/'
456:foo:123:bar:789-baz
$ echo 'foo and bar and baz land good' | sed -E 's/(.*)and/\1XYZ/'
foo and bar and baz lXYZ good
$ # use word boundaries as necessary - GNU sed
$ echo 'foo and bar and baz land good' | sed -E 's/(.*)\band\b/\1XYZ/'
foo and bar XYZ baz land good
$ # replacing last but one
$ echo 'foo:123:bar:baz' | sed -E 's/(.*):(.*:)/\1-\2/'
foo:123-bar:baz
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):(.*:)/\1-\2/'
456:foo:123:bar-789:baz
$ # replacing last but two
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):((.*:){2})/\1-\2/'
456:foo:123-bar:789:baz
$ # replacing last but three
$ echo '456:foo:123:bar:789:baz' | sed -E 's/(.*):((.*:){3})/\1-\2/'
456:foo-123:bar:789:baz
Further Reading:
Buggy behavior if word boundaries is used inside a group with quanitifiers - for example: echo 'it line with it here sit too' | sed -E 's/with(.*\bit\b){2}/XYZ/' fails
Greedy vs. Reluctant vs. Possessive Quantifiers
Reference - What does this regex mean?
sed manual: Back-references and Subexpressions
This might work for you (GNU sed):
sed 's/\(.*\)pattern/\1replacement/' file
Use greed to swallow up the pattern space and then regexp engine will step back through the line and find the first match i.e. the last match.
A fun way to do this, is to use rev to reverse the characters of each line and write your sed replacement backwards.
rev input_file | sed 's/nrettap/tnemecalper/' | rev
I have values in a file like this ' value-to-remove '(without the ' characters). I want to use sed to run through the file and replace the values including the space before and after. I am running this via a bash script.
How can I do this?
The sed command I'm using at the moment replaces the values but leaves behind the two spaces.
sed -i 's/ '$value' / /g' test.conf
In script I have
sed -i -e 's/\s'$DOMAIN'-'$SITE'\s/\s/g' gitosis.conf
echoed as
sed -i -e s/\sffff.com-eeee\s/\s/g test.conf
Not working though.
IMHO your sed does not know '\s', so use [ \t], and use double quotes, otherwise your variables will not expand. e.g.:
sed -i -e "s/[ \t]'$DOMAIN'-'$SITE'[ \t]/ /g" gitosis.conf
Let me know if this is what you need
echo 'Some values to remove value-to-remove and more' | sed -e 's/\svalue-to-remove\s/CHANGED/g'
output: Some values to removeCHANGEDand more