I imported the sample binding file from "BizTalk Server Administration Console" -> "Import -> Bindings...".
It created receive location successfully but despite in the file <Enable>true</Enable>, it created locations with status as disabled.
Is it possible to make it enable with the binding file?
<?xml version="1.0" encoding="utf-8"?>
<BindingInfo xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Assembly="Microsoft.BizTalk.Deployment, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Version="3.5.1.0" BindingStatus="PartiallyBound" BoundEndpoints="43" TotalEndpoints="47">
<Timestamp>2017-09-11T11:27:28.7543844+03:00</Timestamp>
<DistributionListCollection />
<ReceivePortCollection>
<ReceivePort Name="XXXXXXXXXXX" IsTwoWay="true" BindingOption="1">
<Description xsi:nil="true" />
<ReceiveLocations>
<ReceiveLocation Name="XXXXXXXXX_ReceiveLocation">
<Description xsi:nil="true" />
<Address>net.pipe://localhost/XXXXXXXXXX</Address>
<PublicAddress />
<Primary>false</Primary>
<ReceiveLocationServiceWindowEnabled>false</ReceiveLocationServiceWindowEnabled>
<ReceiveLocationFromTime>2000-01-01T21:00:00</ReceiveLocationFromTime>
<ReceiveLocationToTime>2000-01-01T20:59:59</ReceiveLocationToTime>
<ReceiveLocationStartDateEnabled>false</ReceiveLocationStartDateEnabled>
<ReceiveLocationStartDate>2009-05-05T00:00:00</ReceiveLocationStartDate>
<ReceiveLocationEndDateEnabled>false</ReceiveLocationEndDateEnabled>
<ReceiveLocationEndDate>2009-05-06T23:59:59</ReceiveLocationEndDate>
<ReceiveLocationTransportType Name="WCF-NetNamedPipe" Capabilities="907" ConfigurationClsid="148d2e28-d634-4127-aa9e-7d6298156bf1" />
<ReceiveLocationTransportTypeData><CustomProps><UseSSO vt="11">0</UseSSO><InboundBodyLocation vt="8">UseBodyPath</InboundBodyLocation><InboundBodyPathExpression vt="8">/*[local-name()='part']</InboundBodyPathExpression><SendTimeout vt="8">00:30:00</SendTimeout><OutboundXmlTemplate vt="8"><bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007" encoding="xml"/></OutboundXmlTemplate><OpenTimeout vt="8">00:30:00</OpenTimeout><SecurityMode vt="8">Transport</SecurityMode><TransactionProtocol vt="8">OleTransactions</TransactionProtocol><MaxReceivedMessageSize vt="3">2147483647</MaxReceivedMessageSize><TransportProtectionLevel vt="8">EncryptAndSign</TransportProtectionLevel><CloseTimeout vt="8">00:30:00</CloseTimeout><SuspendMessageOnFailure vt="11">-1</SuspendMessageOnFailure><EnableTransaction vt="11">0</EnableTransaction><InboundNodeEncoding vt="8">Base64</InboundNodeEncoding><IncludeExceptionDetailInFaults vt="11">-1</IncludeExceptionDetailInFaults><MaxConcurrentCalls vt="3">300</MaxConcurrentCalls><OutboundBodyLocation vt="8">UseBodyElement</OutboundBodyLocation></CustomProps></ReceiveLocationTransportTypeData>
<ReceivePipeline Name="Microsoft.BizTalk.DefaultPipelines.XMLReceive" FullyQualifiedName="Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="1" TrackingOption="ServiceStartEnd MessageSendReceive PipelineEvents" Description="" />
<ReceivePipelineData xsi:nil="true" />
<SendPipeline Name="Microsoft.BizTalk.DefaultPipelines.PassThruTransmit" FullyQualifiedName="Microsoft.BizTalk.DefaultPipelines.PassThruTransmit, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="2" TrackingOption="ServiceStartEnd MessageSendReceive PipelineEvents" Description="" />
<SendPipelineData xsi:nil="true" />
<Enable>true</Enable>
<ReceiveHandler Name="BizTalkServerApplication" HostTrusted="true">
<TransportType Name="WCF-NetNamedPipe" Capabilities="907" ConfigurationClsid="148d2e28-d634-4127-aa9e-7d6298156bf1" />
</ReceiveHandler>
</ReceiveLocation>
</ReceiveLocations>
<SendPipelineData xsi:nil="true" />
<Authentication>0</Authentication>
<Tracking>255</Tracking>
<OutboundTransforms />
<RouteFailedMessage>false</RouteFailedMessage>
<ApplicationName>XXXXXXXXXXX</ApplicationName>
</ReceivePort>
</ReceivePortCollection>
<PartyCollection />
</BindingInfo>
IMHO is not possible, you have to import the bindings and then enable the Receive Locations through the Admin Console or PowerShell or WMI, ...
Related
Is there a way to not tell the service about the settings at all and just provide them at the application level?
I am still unhappy with how servicefabric configuration seems to work.
Near as I can tell I have to specify in the service’s settings.xml all of the possible configuration values. Then I can override those in the application’s ApplicationParameters. Per documentation this looks like it holds true for environment variables also.
The complication that creates is that our configuration is used to hydrate options in many cases with arrays.
For example consider the json:
{
"AuthorizationOptions": {
"Policies": [
{
"Name": "User",
"Groups": [ "Domain Users" ]
}
]
}
}
There are 2 arrays; that are necessary and useful. To express this in the service fabric configuration it translates to:
<Section Name="AuthorizationOptions">
<Parameter Name="Policies:0:Name" Value="User"/>
<Parameter Name="Policies:0:Groups:0" Value="Domain Users"/>
</Section>
While the translation is not pleasant in comparison to the structured object it is completely usable.
However, If I don’t specify the section and parameters in the service, I can’t seem to override them in the application. So in this case I would have to define the exact number of policies and groups per policy in the service and the application could modify the policy name, or the group values, but not the number of policies total or number of groups total.
Is there a way to not tell the service about the settings at all and just provide them at the application level?
If not what alternatives exist to make the service reusable across applications that I may want to use to provide this type of dynamic configuration differently?
The last part of the puzzle that may assist in answering this question is I am using some pre-release code to translate the service fabric settings into Microsoft.Extensions.Configuration.IConfiguration. However, that is just taking the settings it finds; it isn't the cause of the override issue I am running into.
Example Service Settings.xml:
<?xml version="1.0" encoding="utf-8" ?>
<Settings xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/2011/01/fabric">
<Section Name="AuthorizationOptions">
<!-- I should not have to provide these at the application level!
However, it fails to deploy if I don't. -->
<Parameter Name="Policies:0:Name" Value="User"/>
<Parameter Name="Policies:0:Groups:0" Value="Domain Users"/>
</Section>
</Settings>
Example Application ApplicationManifest.xml:
<?xml version="1.0" encoding="utf-8"?>
<ApplicationManifest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ApplicationTypeName="ServiceFabric.ExampleType" ApplicationTypeVersion="1.0.0" xmlns="http://schemas.microsoft.com/2011/01/fabric">
<Parameters>
<Parameter Name="Service.Example_ASPNETCORE_ENVIRONMENT" DefaultValue="" />
<Parameter Name="Service.Example_InstanceCount" DefaultValue="-1" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies_0_Name" DefaultValue="Users" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies_0_Groups_0" DefaultValue="Domain Users" />
</Parameters>
<ServiceManifestImport>
<ServiceManifestImport>
<ServiceManifestRef ServiceManifestName="Service.ExamplePkg" ServiceManifestVersion="1.0.0" />
<ConfigOverrides>
<ConfigOverride Name="Config">
<Settings>
<Section Name="AuthorizationOptions">
<Parameter Name="Policies:0:Name" Value="[Service.Example_AuthorizationOptions_Policies_0_Name]" />
<Parameter Name="Policies:0:Groups:0" Value="[Service.Example_AuthorizationOptions_Policies_0_Groups_0]" />
</Section>
</Settings>
</ConfigOverride>
</ConfigOverrides>
<EnvironmentOverrides CodePackageRef="code">
<EnvironmentVariable Name="ASPNETCORE_ENVIRONMENT" Value="[Service.Example_ASPNETCORE_ENVIRONMENT]" />
</EnvironmentOverrides>
</ServiceManifestImport>
<DefaultServices>
<Service Name="Service.Example" ServicePackageActivationMode="ExclusiveProcess">
<StatelessService ServiceTypeName="Service.ExampleType" InstanceCount="[Service.Example_InstanceCount]">
<SingletonPartition />
</StatelessService>
</Service>
</DefaultServices>
</ApplicationManifest>
Example Application ApplicationParameters (Local.1Node.xml):
<?xml version="1.0" encoding="utf-8"?>
<Application xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" Name="fabric:/ServiceFabric.Example" xmlns="http://schemas.microsoft.com/2011/01/fabric">
<Parameters>
<Parameter Name="Service.Example_ASPNETCORE_ENVIRONMENT" Value="Development" />
<Parameter Name="Service.Example_InstanceCount" Value="-1" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies_0_Name" Value="Users" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies_0_Groups_0" Value="Domain Users" />
</Parameters>
</Application>
Example Application PublishProfiles (Local.1Node.xml):
<?xml version="1.0" encoding="utf-8"?>
<PublishProfile xmlns="http://schemas.microsoft.com/2015/05/fabrictools">
<ClusterConnectionParameters />
<ApplicationParameterFile Path="..\ApplicationParameters\Local.1Node.xml" />
</PublishProfile>
Should be unrelated, but example consumption of the settings:
internal sealed class Example : StatelessService
{
public Example(StatelessServiceContext context)
: base(context)
{ }
protected override IEnumerable<ServiceInstanceListener> CreateServiceInstanceListeners()
{
return new ServiceInstanceListener[]
{
new ServiceInstanceListener(serviceContext =>
new HttpSysCommunicationListener(serviceContext, "ServiceEndpoint", (url, listener) =>
{
ServiceEventSource.Current.ServiceMessage(serviceContext, $"Starting HttpSys on {url}");
return new WebHostBuilder()
.UseHttpSys(options =>
{
options.Authentication.Schemes = AuthenticationSchemes.Negotiate; // Microsoft.AspNetCore.Server.HttpSys
options.Authentication.AllowAnonymous = false;
}).ConfigureServices(services => services.AddSingleton<StatelessServiceContext>(serviceContext))
.UseContentRoot(Directory.GetCurrentDirectory())
.ConfigureAppConfiguration((hostingContext, config) =>
{
config.SetBasePath(Directory.GetCurrentDirectory());
config.AddServiceFabricConfiguration(FabricRuntime.GetActivationContext(), options => {
options.IncludePackageName=false;
});
})
.UseStartup<Startup>()
.UseServiceFabricIntegration(listener, ServiceFabricIntegrationOptions.None)
.UseUrls(url)
.Build();
}))
};
}
}
From that point forward everything is in the IConfiguration object as expected.
There are many ways to configure a service fabric application, and each approach will bring you to a different challenges.
SF team recommend the approach in the docs, because you can have a better version control of configurations, and makes harder to commit mistakes, as it is explicitly declared in a file, I've used a few different approaches because of limitations like yours, the follwoing approach might solve your problem:
Configure like the original approach, but with complex types stored as JSON values: it is the closest solution to the recommended design and you still can keep control of the configuration versions on source control.
It would be something like:
Settings.xml:
<?xml version="1.0" encoding="utf-8" ?>
<Settings xmlns... namespaces here...>
<Section Name="AuthorizationOptions">
<Parameter Name="Policies"/>
</Section>
</Settings>
ApplicationManifest.xml:
<?xml version="1.0" encoding="utf-8"?>
<ApplicationManifest ApplicationTypeName="ServiceFabric.ExampleType" ApplicationTypeVersion="1.0.0" xmlns:...namespaces....>
<Parameters>
<Parameter Name="Service.Example_ASPNETCORE_ENVIRONMENT" DefaultValue="" />
<Parameter Name="Service.Example_InstanceCount" DefaultValue="-1" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies" DefaultValue="[]" />
</Parameters>
<ServiceManifestImport>
<ServiceManifestImport>
<ServiceManifestRef ServiceManifestName="Service.ExamplePkg" ServiceManifestVersion="1.0.0" />
<ConfigOverrides>
<ConfigOverride Name="Config">
<Settings>
<Section Name="AuthorizationOptions">
<Parameter Name="Policies" Value="[Service.Example_AuthorizationOptions_Policies]" />
</Section>
</Settings>
</ConfigOverride>
</ConfigOverrides>
<EnvironmentOverrides CodePackageRef="code">
<EnvironmentVariable Name="ASPNETCORE_ENVIRONMENT" Value="[Service.Example_ASPNETCORE_ENVIRONMENT]" />
</EnvironmentOverrides>
</ServiceManifestImport>
<DefaultServices>
<Service Name="Service.Example" ServicePackageActivationMode="ExclusiveProcess">
<StatelessService ServiceTypeName="Service.ExampleType" InstanceCount="[Service.Example_InstanceCount]">
<SingletonPartition />
</StatelessService>
</Service>
</DefaultServices>
</ApplicationManifest>
ApplicationParameters.xml
<?xml version="1.0" encoding="utf-8"?>
<Application Name="fabric:/ServiceFabric.Example" xmlns:...namespaces....>
<Parameters>
<Parameter Name="Service.Example_ASPNETCORE_ENVIRONMENT" Value="Development" />
<Parameter Name="Service.Example_InstanceCount" Value="-1" />
<Parameter Name="Service.Example_AuthorizationOptions_Policies" Value="[{'Name': 'User','Groups': ['Domain Users']}, {'Name': 'Admin','Groups': ['Administrators']}]" />
</Parameters>
</Application>
In your service code:
public class Policy
{
public string Name { get; set; }
public string[] Groups { get; set; }
}
var settings = this.Context.CodePackageActivationContext.GetConfigurationPackageObject("Config").Settings;
var authOptions = settings.Sections["AuthorizationOptions"].Parameters["Policies"].Value;
var obj = JsonConvert.DeserializeObject<Policy[]>(authOptions);
You could go a level further and store the entire
AuthorizationOptions as a JSON, but like said previously, more
generic it become, easier will be to commit mistakes and harder to find
configuration issues.
I am working on PowerShell. In that am trying to change the values of an existing config file values with the help of PowerShell and its working well.
But I faced a new task as below and strucked here in converting the values in PowerShell to override in my config file. For this task, I referred this link
If had a Code like this :
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="service.tasks" type="HRNetTaskService.TaskConfigurationSection, TaskService" />
</configSections>
<connectionStrings>
<add name="Production" connectionString="" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="RestServiceUrl" value="XXXXXXXXXXX" />
</appSettings>
<service.tasks>
<tasks>
<!-- App.config specified tasks are always recurring starting from whenever The Service first schedules it -->
<task name="ExpireRequirements" taskName="ExpireRequirements" recurrenceFactor="1" recurrenceType="Days" executeTime="01:00">
<parameters>
<param key="entityID">00000000-0000-0000-0000-000000000E01</param>
</parameters>
</task>
<task name="RequestExpiredRequirementsTask" taskName="RequestExpiredRequirementsTask" recurrenceFactor="1" recurrenceType="Days" executeTime="01:00">
<parameters>
<param key="entityID">00000000-0000-0000-0000-000000000E01</param>
<param key="CopyBatchSize">50</param>
</parameters>
</task>
<task name="UpdateRequirementChecksEffectiveDateTask" taskName="UpdateRequirementChecksEffectiveDateTask" recurrenceFactor="1" recurrenceType="Days" executeTime="01:00">
<parameters>
<param key="entityID">00000000-0000-0000-0000-000000000E01</param>
</parameters>
</task>
<task name="PeoplenetMatchAssignmentRefresh" taskName="PeoplenetMatchAssignmentRefresh">
<parameters>
<param key="checkInterval">300000</param>
<param key="batchCount">100</param>
</parameters>
</task>
</tasks>
</service.tasks>
<system.net>
<connectionManagement>
<add address="*" maxconnection="48" />
</connectionManagement>
</system.net>
<system.runtime.remoting>
<application name="server">
<channels>
<channel ref="tcp" port="8090">
<serverProviders>
<formatter ref="soap" typeFilterLevel="Full" />
<formatter ref="binary" typeFilterLevel="Full" />
</serverProviders>
</channel>
</channels>
</application>
</system.runtime.remoting>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
</configuration>
How to change the values inside the service.tasks tag and system.runtime.remoting tags.
Refer to this code to update entityID value in ExpireRequirements task element (specify config file path in argument:-webCofig xxx):
param(
[string]$webConfig
)
$doc = (Get-Content $webConfig) -as [Xml]
$root=$doc.get_DocumentElement()
$ExpireRequirementsTask=$root."service.tasks"."tasks"."task" | where {$_.name -eq 'ExpireRequirements'}
Write-Output $ExpireRequirementsTask
$ExpireRequirementsTaskEntityID=$ExpireRequirementsTask."parameters"."param" | where {$_.key -eq 'entityID'}
Write-Output $ExpireRequirementsTaskEntityID
$ExpireRequirementsTaskEntityID.InnerText="11111111-0000-0000-0000-000000000E01"
$doc.Save($webConfig)
I'm trying to capture an etl trace on the HoloLens with my own events, and some generic networking events. Using WPR on my PC, I can choose Networking I/O activity, which will show events like Microsoft-Windows-TCPIP when I analyze in WPA. I can't figure out how to see these events on a HoloLens, or successfully put them in my wprp file.
I've tried the following with no success, even on Windows. My own events work fine.
<EventProvider Id="Microsoft.Windows.TCPIP" Name="2F07E2EE-15DB-40F1-90EF-9D7BA282188A"/>
...
<EventProviderId Value="Microsoft.Windows.TCPIP"/>
Here is an WPRP file that captures "Microsoft-Windows-TCPIP" and "Microsoft-Windows-Kernel-Network" events.
<?xml version="1.0" encoding="utf-8"?>
<WindowsPerformanceRecorder Version="1.0" Author="MagicAndre1981" Copyright="MagicAndre1981" Company="MagicAndre1981">
<Profiles>
<SystemCollector Id="SystemCollector" Name="NT Kernel Logger">
<BufferSize Value="1024" />
<Buffers Value="512" />
</SystemCollector>
<EventCollector Id="EventCollector_UserModeEvents_Session" Name="UserModeEvents_Session">
<BufferSize Value="1024" />
<Buffers Value="512" />
</EventCollector>
<SystemProvider Id="SystemProvider">
<Keywords>
<Keyword Value="ProcessThread" />
<Keyword Value="Loader" />
<Keyword Value="SampledProfile" />
<Keyword Value="Interrupt"/>
<Keyword Value="DPC"/>
<Keyword Value="ReadyThread" />
<Keyword Value="CSwitch" />
<Keyword Value="NetworkTrace" />
</Keywords>
<Stacks>
<Stack Value="SampledProfile" />
<Stack Value="CSwitch" />
<Stack Value="ReadyThread" />
<Stack Value="ImageLoad" />
<Stack Value="ImageUnload" />
</Stacks>
</SystemProvider>
<EventProvider Id="NetworkingCorrelation" Name="Microsoft-Windows-Networking-Correlation" Level="5" Stack="true">
<Keywords>
<Keyword Value="0x7FFF0000000F"/>
</Keywords>
</EventProvider>
<EventProvider Id="KernelNetwork" Name="Microsoft-Windows-Kernel-Network" Level="5" Stack="true" NonPagedMemory="true"/>
<EventProvider Id="TCP" Name="Microsoft-Windows-TCPIP" Level="5" Stack="true" NonPagedMemory="true">
<Keywords>
<Keyword Value="0x0000000400000000"/>
</Keywords>
</EventProvider>
<Profile Id="NetworkProfile.Verbose.File" Name="NetworkProfile" Description="Network Profile" LoggingMode="File" DetailLevel="Verbose">
<Collectors>
<SystemCollectorId Value="SystemCollector">
<SystemProviderId Value="SystemProvider" />
</SystemCollectorId>
<EventCollectorId Value="EventCollector_UserModeEvents_Session">
<EventProviders>
<EventProviderId Value="NetworkingCorrelation" />
<EventProviderId Value="KernelNetwork" />
<EventProviderId Value="TCP" />
</EventProviders>
</EventCollectorId>
</Collectors>
</Profile>
<Profile Id="NetworkProfile.Verbose.Memory" Name="NetworkProfile" Description="Network Profile" Base="NetworkProfile.Verbose.File" LoggingMode="Memory" DetailLevel="Verbose" />
</Profiles>
<TraceMergeProperties>
<TraceMergeProperty Id="BaseVerboseTraceMergeProperties" Name="BaseTraceMergeProperties" Base="">
<FileCompression Value="true" />
<CustomEvents>
<CustomEvent Value="ImageId"/>
<CustomEvent Value="BuildInfo"/>
<CustomEvent Value="VolumeMapping"/>
<CustomEvent Value="EventMetadata"/>
<CustomEvent Value="PerfTrackMetadata"/>
<CustomEvent Value="NetworkInterface"/>
</CustomEvents>
</TraceMergeProperty>
</TraceMergeProperties>
</WindowsPerformanceRecorder>
Run it via "C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit\wpr.exe" -start network.wprp and next "C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit\wpr.exe" -stop NetworkData.etl
I'm trying to deploy an ASP.net 5 website to my local service fabric dev cluster but get an Access Denied exception on every deploy. I know that the problem is with the web service because when I remove it from the deployment my other service is deployed without any error
This exception looks like it is trying to delete a file, but which one and why wouldn't it have access?
6>. 'E:\Github\Flow.Server\Flow.Server.Fabric\Scripts\Deploy-FabricApplication.ps1' -ApplicationPackagePath 'E:\Github\Flow.Server\Flow.Server.Fabric\pkg\Debug' -PublishProfileFile 'E:\Github\Flow.Server\Flow.Server.Fabric\PublishProfiles\Local.xml' -DeployOnly:$true -UnregisterUnusedApplicationVersionsAfterUpgrade $false -OverrideUpgradeBehavior 'None' -OverwriteBehavior 'Always' -ErrorAction Stop
6>Message : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
6>Data : {}
6>InnerException :
6>TargetSite : Void RunInMTA(System.Action)
6>StackTrace : at System.Fabric.Interop.Utility.RunInMTA(Action action)
6> at System.Fabric.Common.FabricDirectory.Delete(String path, Boolean recursive, Boolean
6> deleteReadOnlyFiles)
6> at Microsoft.ServiceFabric.Powershell.ApplicationCmdletBase.TestApplicationPackage(String
6> applicationPackagePath, Hashtable applicationParameters, String imageStoreConnectionString)
6> at System.Management.Automation.CommandProcessor.ProcessRecord()
6>HelpLink :
6>Source : System.Fabric
6>HResult : -2147024891
Here is my ApplicationManifest
<?xml version="1.0" encoding="utf-8"?>
<ApplicationManifest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ApplicationTypeName="Flow.Server.FabricType" ApplicationTypeVersion="1.0.0" xmlns="http://schemas.microsoft.com/2011/01/fabric">
<Parameters>
<Parameter Name="Silo_InstanceCount" DefaultValue="-1" />
</Parameters>
<ServiceManifestImport>
<ServiceManifestRef ServiceManifestName="Flow.Server.Fabric.WebApi" ServiceManifestVersion="1.0.0" />
</ServiceManifestImport>
<ServiceManifestImport>
<ServiceManifestRef ServiceManifestName="Flow.Server.Fabric.SiloPkg" ServiceManifestVersion="1.0.0" />
<ConfigOverrides />
</ServiceManifestImport>
<DefaultServices>
<Service Name="Flow.Server.Fabric.WebApiService">
<StatelessService ServiceTypeName="Flow.Server.Fabric.WebApiType">
<SingletonPartition />
</StatelessService>
</Service>
<Service Name="Flow.Server.Fabric.Silo">
<StatelessService ServiceTypeName="Flow.Server.Fabric.SiloType" InstanceCount="[Silo_InstanceCount]">
<SingletonPartition />
</StatelessService>
</Service>
</DefaultServices>
</ApplicationManifest>
And here is the ServiceManifest
<?xml version="1.0" encoding="utf-8"?>
<ServiceManifest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" Name="Flow.Server.Fabric.WebApi" Version="1.0.0" xmlns="http://schemas.microsoft.com/2011/01/fabric">
<ServiceTypes>
<StatelessServiceType ServiceTypeName="Flow.Server.Fabric.WebApiType">
<Extensions>
<Extension Name="__GeneratedServiceType__">
<GeneratedNames xmlns="http://schemas.microsoft.com/2015/03/fabact-no-schema">
<DefaultService Name="Flow.Server.Fabric.WebApiService" />
<ServiceEndpoint Name="Flow.Server.Fabric.WebApiTypeEndpoint" />
</GeneratedNames>
</Extension>
</Extensions>
</StatelessServiceType>
</ServiceTypes>
<CodePackage Name="C" Version="1.0.0">
<EntryPoint>
<ExeHost>
<Program>approot\runtimes\dnx-clr-win-x64.1.0.0-rc1-update1\bin\dnx.exe</Program>
<Arguments>--appbase approot\src\Flow.Server.Fabric.WebApi Microsoft.Dnx.ApplicationHost Microsoft.ServiceFabric.AspNet.Hosting --server Microsoft.AspNet.Server.WebListener</Arguments>
<WorkingFolder>CodePackage</WorkingFolder>
<ConsoleRedirection FileRetentionCount="5" FileMaxSizeInKb="2048" />
</ExeHost>
</EntryPoint>
</CodePackage>
<Resources>
<Endpoints>
<Endpoint Name="Flow.Server.Fabric.WebApiTypeEndpoint" Protocol="http" Type="Input" />
</Endpoints>
</Resources>
</ServiceManifest>
<form id="form1" runat="server">
<div>
<asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager><ajaxToolkit:ToolkitScriptManagerID="ToolkitScriptManager1"runat="server">
</ajaxToolkit:ToolkitScriptManager>
<asp:TextBox ID="TxtEditor" runat="server"/>
<ajaxToolkit:HtmlEditorExtender ID="HtmlEditorExtender1" runat="server" TargetControlID="TxtEditor">
</ajaxToolkit:HtmlEditorExtender>
<br/>
<asp:Button runat="server" Text="Submit" OnClick="Submit"/>
</form>
This is the design page and I add "<%# Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="asp" %>" at the top of the page
protected global::AjaxControlToolkit.HtmlEditorExtender HtmlEditorExtender1;
I am getting error on this line.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<sectionGroup name="system.web">
<section name="sanitizer" requirePermission="false" type="AjaxControlToolkit.Sanitizer.ProviderSanitizerSection, AjaxControlToolkit" />
</sectionGroup>
<section name="ajaxControlToolkit" type="AjaxControlToolkit.AjaxControlToolkitConfigSection, AjaxControlToolkit" /></configSections>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
</assemblies>
</compilation>
<sanitizer defaultProvider="HtmlAgilityPackSanitizerProvider">
<providers>
<add name="HtmlAgilityPackSanitizerProvider" type="AjaxControlToolkit.Sanitizer.HtmlAgilityPackSanitizerProvider"></add>
</providers>
</sanitizer>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages></system.web>
<ajaxControlToolkit htmlSanitizer="AjaxControlToolkit.HtmlEditor.Sanitizer.DefaultHtmlSanitizer, AjaxControlToolkit.HtmlEditor.Sanitizer" />
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="AjaxControlToolkit" publicKeyToken="28f01b0e84b6d53e" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-1.0.20229.24049" newVersion="1.0.20229.24049" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
This is my web.config page
You register "AjaxControlToolkit" namespace with "asp" tag prefix, but access HtmlEditorExtender with "ajaxToolkit" prefix.
Change it to "ajaxToolkit" everywhere.