I'm receiving the following error while running flutter run on some projects, however, on other projects it works fine:
(base) Nusraths-MacBook-Pro:flutter_uber_clone rahama$ flutter emulators --launch Pixel_2_XL_API_28
(base) Nusraths-MacBook-Pro:flutter_uber_clone rahama$ flutter run
Using hardware rendering with device Android SDK built for x86. If you get graphics artifacts, consider enabling software rendering with "--enable-software-rendering".
Launching lib/main.dart on Android SDK built for x86 in debug mode...
Initializing Gradle... 0.8s
Resolving dependencies... 1.4s
Running Gradle task 'assembly debug'...
Running Gradle task 'assembly debug'... Done 9.3s
Built build/app/outputs/apk/debug/app-debug.apk.
Installing build/app/outputs/apk/app.apk... 1.9s
Error: ADB exited with exit code 1
Performing Streamed Install
ADB: failed to install /Users/rahama/development/flutter_uber_clone/build/app/outputs/apk/app.apk: Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]
Error launching the application on Android SDK built for x86.
It's just the flutter demo project, I haven't made any changes to it.
Actually, the answer lies in the error message of your question:
[ADB: failed to install /Users/rahama/development/flutter_uber_clone/build/app/outputs/apk/app.apk: Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]Error launching the application on Android SDK built for x86.]
Your Emulator is running out of space, clear its cache:
Click on AVD Manager
Wipe Data (Your Target Device )
You are set to go..
Flutter had a new update (I think last night), run flutter upgrade in the terminal and it should work fine (at least that did it for me).
Docs:
To update both the Flutter SDK and the packages that your app depends on, use the flutter upgrade command from the root of your app (the same directory that contains the pubspec.yaml file)
https://flutter.dev/docs/development/tools/sdk/upgrading
Run in terminal
$ flutter clean
and then
$ flutter pub get
and then
$ flutter packages get
then
$ flutter run
Although I don't have any other apps installed on my emulator, when I install the flutter app, I get the same error.
I found that the storage space of the emulator is indeed not enough. Because when I created the emulator, the default was only 1024M. When I changed the storage space of the emulator to 4096M, the problem was solved.
In my case, it was caused by an adb glitch, not a flutter problem.
This was solved by doing a combination of the following, not sure which step fixed it exactly
Reset adb server on desktop, macOS in mycase: adb kill-server, and then adb start-server
Reset USB debugging on the mobile device.
Restarted the device.
None of the existing answers worked for me, so it wasn't a flutter problem. A plain adb install any.apk didn't work. So I narrowed it down to an adb/usb issue.
this common problem with the Emulator and all you need to clear the Emulator cache .
in my case it was the solution...
1- open AVD Manger.
2- click on the (bottom arrow) that beside (Edit) button.
3- choose Wipe Data.
Sometimes it can work by uninstalling your app and and all it's data then try again,
another fix is to send the apk you are trying to install from projectname/build/app/outputs/apk and to your device and install it and try again.
Note: Following is answer for stuck at Performing Streamed Install by adb install xxx.apk:
phenomenon
use adb install xxx.apk and showing Performing Streamed Install but stuck, hang forever.
Have tried
re-plug USB cable
change USB adapter
change USB cable
reboot PC(Mac)
reboot android phone
restart VSCode
make adb command shorter
from: adb -s hxxxxxxxxs install -r /Users/limao/dev/xxx/crawler/appAutoCrawler/AppCrawler/task/20201202_xxx_0192LeiMoChuanShuo/20201202_xxx_0192LeiMoChuanShuo_gameApp_Android/20201202_xxx_0192LeiMoChuanShuo_gameApp_Android_0.apk
to: adb -s hxxxxxxxxs install -r /var/folders/gt/5868sbcd1jq4rxvryqhy2_1sz8n0s3/T/tmpq3ypjfgd/20201202_xxx_0192LeiMoChuanShuo_gameApp_Android_0.apk
tried adb shell pm install but not support
etc...
all not work.
Final solution
update (original old version 29.0.5) adb to latest version (30.0.5)
Q: how to update adb to latest version
A:
goto
https://developer.android.com/studio/releases/platform-tools
to download your platform adb
下载适用于 Windows 的 SDK Platform-Tools
下载适用于 Mac 的 SDK Platform-Tools
下载适用于 Linux 的 SDK Platform-Tools
or:
goto
https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/
to download:
windows
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Mac
https://dl.google.com/android/repository/platform-tools-latest-darwin.zip
Linux
https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip to got folder platform-tools
add the folder to your PATH variable
eg:
vi ~/.zshrc
PATH=/Users/limao/dev/tools/android/adb/platform-tools:$PATH
In my case, this was resolved by updating android studio and all the flutter and dart plugins.
Go to File>> invalidate caches
By this way I resolved this issues on BlueStack.Do these steps for running android applications on BlueStack Emulator.
Go to setting of BlueStack Emulator
Then click on Advance and then
Turn on Android Debug Bridge (ADB)
I experienced this same problem on a physical device, tried all solution i could see out there but none worked.
What worked at the end of the day was to ensure my device API version was also installed in the android studio.
image1
image2
Forewords
This question gets the first result from Google, so my answer covers a bit different error.
The error in question has [INSTALL_FAILED_INSUFFICIENT_STORAGE] code. My answer is for any Performing Streamed Install error that does not specifically define [INSTALL_FAILED_INSUFFICIENT_STORAGE] code.
My Environment
KDE Neon 5.24 (a.k.a. Ubuntu 20.04 but latest KDE stuff)
Visual Studio Code from Snap (I use this mainly)
Android Studio from Snap (I use this to install SDK, Platform Tools and Build Tools)
Troubleshooting
The problem is this globally installed /usr/bin/adb overrides the adb that Flutter uses. As you know, Ubuntu has many outdated packages (to protect their system's stability). ADB is one of them. So, if you try to do:
adb kill-server
adb start-server
You will highly likely get an output similar to below:
* daemon not running; starting now at tcp:5037
ADB server didn't ACK
Full server startup log: /tmp/adb.1000.log
Server had pid: 12668
--- adb starting (pid 12668) ---
adb I 03-26 03:19:35 12668 12668 main.cpp:57] Android Debug Bridge version 1.0.39
adb I 03-26 03:19:35 12668 12668 main.cpp:57] Version 1:8.1.0+r23-5ubuntu2
adb I 03-26 03:19:35 12668 12668 main.cpp:57] Installed as /usr/lib/android-sdk/platform-tools/adb
adb I 03-26 03:19:35 12668 12668 main.cpp:57]
adb I 03-26 03:19:35 12668 12668 adb_auth_host.cpp:416] adb_auth_init...
adb I 03-26 03:19:35 12668 12668 adb_auth_host.cpp:174] read_key_file '/home/erayerdin/.android/adbkey'...
adb I 03-26 03:19:35 12668 12668 adb_auth_host.cpp:391] adb_auth_inotify_init...
adb I 03-26 03:19:35 12668 12668 adb_auth_host.cpp:467] Calling send_auth_response
adb server killed by remote request
* failed to start daemon
error: cannot connect to daemon
In some flutter run sessions, I've got an output similar to "adb server version (whatever) does not match the client (whatever); killing". That's when I had the doubt maybe I have installed adb globally. Check this:
which adb
# /usr/bin/adb
# This is a sign that this adb might be globally installed.
# This must be a symlink. Just to make sure, I do the following...
realpath /usr/bin/adb
# /usr/lib/android-sdk/platform-tools
# This is the evidence that it has been installed globally.
So, we use an outdated version of adb, which does not match the target device's adb server.
Solution
So, we need to get rid of this global adb first.
⚠ Warning
If you use adb from terminal, what we are going to do will remove it. You can add your {SDK PATH}/platform-tools where SDK PATH is where you have installed SDK to get it back.
Simply do:
sudo apt remove android-sdk android-sdk-common android-sdk-build-tools android-sdk-build-tools-common android-sdk-platform-tools android-sdk-platform-tools-common
However, doing these actually does not remove adb from the system. It still lays there for some reason, so, for the last step, we do:
# simply backup our symlink
sudo mv /usr/bin/adb /usr/bin/adb.bak
# and backup global android-sdk tools
sudo mv /usr/lib/android-sdk /usr/lib/android-sdk.bak
After these steps, you can restart your editor and try again. If you want to make double sure, you can optionally do (while your editor's closed):
# clean the build artifacts
flutter clean
# reinstall the packages because we have cleared them
flutter pub get
flutter pub get packages
Android 12 requires you to add a piece of code to your main activity
Go to your project folder and open the AndroidManifest.xml file
Add the below code in the activity
android:exported="true"
I was having the same issue with a physical device connected via wifi, then I figured out what was wrong. The battery of my device was below 15%, it worked as expected after charging. So, keep an eye on the battery status if you're working with a physical device via wifi.
ADB will not install my 32-bit APK file on an emulator. But it is not showing any error message when trying to install it:
In Android Studio 4.2.2 (on my Ubuntu 20.04.2 LTS laptop) I installed an emulator: Pixel_2_API_27_Android_8.1_x86_
I then open a Terminal window and do this:
:~$ /home/henrik/Android/Sdk/platform-tools/adb start-server
* daemon not running; starting now at tcp:5037
* daemon started successfully
:~$ which adb
:~$ /home/henrik/Android/Sdk/platform-tools/adb devices -l
List of devices attached
:~$ emulator #Pixel_2_API_27_Android_8.1_x86_
emulator: Android emulator version 30.7.4.0 (build_id 7453540) (CL:N/A)
handleCpuAcceleration: feature check for hvf
cannot add library /home/henrik/Android/Sdk/emulator/qemu/linux-x86_64/lib64/vulkan/libvulkan.so: failed
added library /home/henrik/Android/Sdk/emulator/lib64/vulkan/libvulkan.so
cannot add library /home/henrik/Android/Sdk/emulator/lib64/vulkan/libvulkan.so.1: full
emulator: INFO: GrpcServices.cpp:315: Started GRPC server at 127.0.0.1:8554, security: Local
emulator: INFO: EmulatorAdvertisement.cpp:93: Advertising in: /run/user/1000/avd/running/pid_68812.ini
qemu-system-i386: warning: TSC frequency mismatch between VM (2711993 kHz) and host (2711986 kHz), and TSC scaling unavailable
In a new Terminal tab I do this:
:~$ /home/henrik/Android/Sdk/platform-tools/adb devices -l
List of devices attached
emulator-5554 device product:sdk_gphone_x86 model:Android_SDK_built_for_x86 device:generic_x86 transport_id:1
:~$ /home/henrik/Android/Sdk/platform-tools/adb -s emulator-5554 install /mnt/4AF15A0435E762B4/mypython/storage/bin/storage-0.1-armeabi-v7a-debug.apk
Performing Streamed Install
But then, nothing happens. (I waited a very long time.)
If I copy the APK file to my physical MOTO G5 Android 8.1.0 phone and install it, at least I get en error message showing that it DID install.
I'm using ionic2 and when I run app as ionic cordova run android. I got this
error: ERROR running one or more of the platforms: Android SDK not
found. Make sure that it is installed. If it is not at the default
location, set the ANDROID_HOME environment variable. You may not have
the required environment or OS to run this project
although I have android studio and SDK installed and set it in bashrc file as:
export ANDROID_HOME="/home/shimaa/Android/Sdk"
export PATH=${PATH}:/home/shimaa/Android/Sdk/platform-tools:/Development/android-sdk/tools
export PATH=${PATH}:/home/shimaa/android-studio/gradle/gradle-3.2/bin
but when I write android or sdkmanager in terminal I got this error:
No command 'android' found and sdkmanager: command not found
which means that android is not installed although it is installed and I run it.
anyone can tell me the solution ?
I try to run react-native app on genymotion android emulator on my mac.
When I write react-native run-android It gets
Running /usr/local/opt/android-sdk/platform-tools/adb reverse tcp:8081 tcp:8081
error: closed
Could not run adb reverse: Command failed: /usr/local/opt/android-sdk/platform-tools/adb reverse tcp:8081 tcp:8081
Building and installing the app on the device (cd android && ./gradlew installDebug...
Could not install the app on the device, read the error above for details.
Make sure you have an Android emulator running or a device connected and have
set up your Android development environment:
https://facebook.github.io/react-native/docs/android-setup.html
MacBook-Pro-MacBook:ART-CarefulPeople macbook$
Then I've tried:
react-native start
react-native run-android
The same result.
Then I've tried:
react-native bundle --entry-file index.android.js --platform android --bundle-output android/app/src/main/assets/index.android.bundle
curl "http://localhost:8081/index.android.bundle?platform=android" -o "android/app/src/main/assets/index.android.bundle"
react-native run-android
The same result.
I've tried just adb reverse tcp:8081 tcp:8081 and it says error: closed
When I try to run app on android-sdk emulator it gets the same error above but without error: closed.
From android studio I can run this app and it works on genymotion.
Tell me please what should I do to run my app on android emulator?
I had a similar problem, and after spending so much time and lots of searching about this issue the only trick worked for me:
Please Install the Required SDKs as shown in this figure
Configure Required SDKs
If You have already installed it, so you must have to update the following SDKs:
Android SDK Tool (update it to latest version)
Android SDK Platform-tools (update it to latest version)
Android SDK Build-tools (update it to latest version)
Android Support Repository under Extra folder (update it to latest version)
You Must have at least Installed the Same version Android API as the installed Android SDK Build-tools & Android SDK Platform-tools version as shown in the Configure Required SDKs figure above.
Note: Local Maven repository for Support Libraries which is listed as the SDK requirement in the official docs of React-native is now named as Android Support Repository in the SDK Manager .
On macOs I manage to fix this by adding:
export ANDROID_HOME=$HOME/Library/Android/sdk
export PATH=$PATH:$ANDROID_HOME/emulator
export PATH=$PATH:$ANDROID_HOME/tools
export PATH=$PATH:$ANDROID_HOME/tools/bin
export PATH=$PATH:$ANDROID_HOME/platform-tools
to ~/.zsh_profile file.
and than type to your terminal
source $HOME/.zsh_profile
The issue was caused by using iTerm2 shell so it's required to edit its own config instead of default $HOME/.bash_profile as described in the official documentation https://reactnative.dev/docs/environment-setup
React Native (On Mac OS Big SUR)
i was stuck here. But updating the environment settings for Android studio did the trick.
nano ~/.zshrc
and paste
export ANDROID_SDK_ROOT=$HOME/Library/Android/sdk
export ANDROID_HOME=$HOME/Library/Android/sdk
export PATH=$PATH:$ANDROID_HOME/emulator:$PATH
export PATH=$PATH:$ANDROID_HOME/tools:$PATH
export PATH=$PATH:$ANDROID_HOME/tools/bin:$PATH
export PATH=$PATH:$ANDROID_HOME/platform-tools:$PATH
export JAVA_HOME=$(/usr/libexec/java_home)
control + o to save
then enter
then control + x to exit
then do
source ~/.zshrc to compile
kill the runnig terminals and run
npx react-native run-android
You can also try use "doctor" command. It will fix most cases.
npx #react-native-community/cli doctor
I had similar issue running emulator from android studio everytime, or on a physical device. Instead, you can quickly run android emulator from command line,
android avd
Once the emulator is running, you can check with adb devices if the emulator shows up.
Then you can simply use
react-native run-android to run the app on the emulator.
Make sure you've platform tools installed to be able to use adb. Or you can use
brew install android-platform-tools
It happened to me that I had an instance of the packager running with an old project (I ran react-native start as usual). I was using Ubuntu 14.04. So what I did was to stop that instance and go to my project folder and in two different console tabs I ran these two commands separately:
npm start #here I used to run react-native start
react-native run-android
npm start is defined in my package.json as:
"start": "node_modules/react-native/packager/packager.sh"
I don't know if there is a sort of confusing stuff for react-native but that did the trick.
On Windows 10 and Android Studio you can go in Android Studio to "File"->"Settings" in Settings then to "Appearance & Behavior" -> "System Settings" -> "Android SDK".
In the Tab "SDK Tools" active:
"Android SDK Build-Tools .."
"Android Emulator"
"Android SDK Plattform-Tools"
"Android SDK Tools"
If all installed then you can start the Emulator in Android Studio with "Tools" -> "Android" -> "AVD Manager".
If the Emulator run you can try "react-native run-android"
If emulator not installed then try this command, (if homebrew installed)
brew install android-platform-tools
might be it will help.
Had a similar problem. I updated my Genymotion and my android SDK's/libraries/dependencies and all seemed to work. To update my SDK's I used android sdk manager {ANDROID_SDK_FOLDER}/tools/android sdk
In my case, there was an issue with the android/gradlew file. I think this happens when we move the code from Windows to Mac OS.
Reference:- https://stackoverflow.com/a/62216646/4786087
I was able to clean the android/gradlew file by running the following commands -
Step 1. On android folder cmd run
chmod +x gradlew
Step 2. After that run
./gradlew clean
Step 3. Next in the root of the project, run
react-native run-android
This should start building the app and launch it in the simulator if everything else is fine.
Try
brew cask install android-platform-tools
adb reverse tcp:9090 tcp:9090
run the app
In my case, this was happening because the android/gradlew file did not have execute permission. Once granted, this worked fine
You probably haven't run the Android SDK in forever.
So you probably just have to update it.
If you open the Android Studio Software it'll probably let you know that and ask to update it for you. Otherwise refer to following link: Update Android SDK
My aim is to run tests in android emulator using selenium2 downloading android drivers
Followed the same steps mentioned in the http://code.google.com/p/selenium/wiki/AndroidDriver
a) JDK / JRE installed
b) Android SDK (windows) is there
c) Created AVD and got the 3.2 version OS target from the SDK manager
d) Started the emulator and installed the selenium android server in the emulator ( installed webdriver APK )
e) Got Selenium standalone server installed 127.0.0.1:4444/wd/hub/static/resource/hub.html ( displayed sessions )
f) Done the port forwarding adb -s emulator-5554 forward tcp:8080 tcp:8080
g) Ran this command adb -s emulator-5554 shell am start -a android.intent.action.MAIN -n org.openqa.selenium.android.app/.MainActivity
h) My webdriver started displayed - Webdriver ready
But the issue is Jetty not get started ( not displayed in emulator as Jetty started )
And the android server not available at localhost:8080/wd/hub from the host machine. ( tried using ipaddress also .. no joy )
When I ran my test by changing to driver = new AndroidDriver();
Failure: SetUp : OpenQA.Selenium.WebDriverException : Unexpected error.
Error 404 Not Found
HTTP ERROR: 404
Problem accessing /hub/session. Reason:
Not Found
Powered by Jetty://
TearDown : System.NullReferenceException : Object reference not set to an instance of an object.
Can anyone help why this is happening ? and solution for the same
Thanks in Advance
Be sure in the AVD you set up your emulator to have an SDCARD with a nonzero size. Selenium appears to require an SDCARD to write temporary data, and the server will silently fail when you try to create a driver, causing what appears to be on the end user to be a 404 or similar error.