Is there any good Erlang client for XMPP server. I checked exmpp but it is too old and not compiling.
Any pointers would be good. I have to send and receive a message both. The Ejabberd REST API will not fit here, as I need to get message back as well.
Thanks.
You can use escalus xmpp library from https://github.com/esl/escalus.
https://github.com/processone/exmpp/releases go here download the latest release.
Extract it.
Make sure you have all neccesary things installed like libtools and erlang.
In the extracted directory run :
$ ./configure
$ make
$ sudo make install
By default this will install exmpp to your erlang environment library. You can specify a custom directory by:
$ ./configure --prefix=/install/exmpp/here
You can find example code in the "examples" directory. Go through them for better understanding.
Related
I trying to get set up with Variant Effect Predictor (VEP) on the command line. I'm following the setup tutorial but I'm encountering some errors around dependencies. I'm also quite new to the command line so if anyone is able to break down the solution too then I'd be very grateful. Thanks!
Tutorial: https://www.ensembl.org/info/docs/tools/vep/script/vep_tutorial.html
VEP requirements: http://www.ensembl.org/info/docs/tools/vep/script/vep_download.html#requirements
I also have Perl v5.32.1.
What I've done:
I installed dependencies (listed in the requirements page) with the following commands:
- sudo -s cpanm DBI
- sudo -s cpanm Archive::Zip
- sudo -s cpanm DBD::mysql
For DBD:mysql, I got the follwoing message:
--> Working on DBD::mysql
Fetching http://www.cpan.org/authors/id/D/DV/DVEEDEN/DBD-mysql-4.050.tar.gz ... OK
Configuring DBD-mysql-4.050 ... N/A
! Configure failed for DBD-mysql-4.050. See /root/.cpanm/work/1626111140.5937/build.log for details.
Trying it out anyway, I ran perl INSTALL.pl (from the tutorial page) and got the message below. I would like VEP to run in online mode too if possible.
`WARNING: DBD::mysql module not found. VEP can only run in offline (--offline) mode without DBD::mysql installed
http://www.ensembl.org/info/docs/tools/vep/script/vep_download.html#requirements
Hello! This installer is configured to install v104 of the Ensembl API for use by the VEP.
It will not affect any existing installations of the Ensembl API that you may have.
It will also download and install cache files from Ensembl's FTP server.
Checking for installed versions of the Ensembl API...done
Setting up directories
Destination directory ./Bio already exists.
Do you want to overwrite it (if updating VEP this is probably OK) (y/n)? y
- fetching BioPerl
- unpacking ./Bio/tmp/release-1-6-924.zip
ERROR: Unable to unpack file ./Bio/tmp/release-1-6-924.zip without Archive::Extract or tar/unzip/gzip`
You show us this error:
Configure failed for DBD-mysql-4.050. See /root/.cpanm/work/1626111140.5937/build.log for details.
So looking in there will give you more clues about what the problems are. Without that, we can only guess.
But we can make educated guesses. The DBD::mysql distribution comes with a file called DBD::mysql::INSTALL which will talk you through some of the problems you'll find while installing this module.
It's important to note that DBD::mysql is a wrapper around MySQL's client libraries. They are written in C, so you'll need a C compiler installed in order to build DBD::mysql. You'll also need the client libraries and the development versions of the client libraries (for the C header files that you'll need to compile the module). On Ubuntu, those packages are called "libmysqlclient" and "libmysqlclient-dev". If you don't have a C compiler, then you'll want to install "gcc" too.
But this is all getting a bit complicated. There's another, simpler, approach. If you're using the system version of Perl (the version that was installed as part of the operating system and probably lives in /usr/bin/perl) then I'd recommend using the pre-build Ubuntu version of the package, which you can install by running:
$ sudo apt-get install libdbd-mysql-perl
Installing that version uses the OS's own package manager, and the package manager knows which other packages are needed in order for it to work - so it will install those as well.
People will probably complain that you're better off installing the modules from CPAN as it gives you more flexibility and allows you to use more up-to-date packages than the versions from your OS repos. And they're right. But, honestly, if you're a non-Perl programmer who just wants to get an application up and running, this is by far the simplest approach.
(But, as I said above, this is all guesswork as you haven't shared the most important errors with us.)
I want to enable soap in remote server. I'm using centos 7 and php 5.6.9(php56w). I follow the instructions written in the web but still I can't enable the soap.
I already added in /usr/local/lib/php.ini
extension="soap.so"
or
extension="/usr/local/lib/php/extensions/no-debug-zts-20131226/soap.so"
or
extension="/usr/lib64/php-zts/modules/soap.so"
but still didn't work.
Comments are highly appreciated! :)
Firstly you need
make clean
To clean last compilation. Next compile php with:
./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mcrypt --with-zlib --with-openssl --enable-mbstring --enable-mbregex --with-pdo-pgsql=/usr/local/pgsql --with-pgsql=/usr/local/pgsql --enable-soap --enable-sockets --enable-calendar
And finaly:
make && make install
Php was compiled from binary or installed from repo? If compiled, then you need recompile it with --enable-soap
I've already read related threads like these, but they do not fully capture our situation.
This is on a firewalled machine. No net access. We can ftp files to folders and install modules from there.
We have CHMOD 777 for our users on some folders. We can install Perl modules if we locally build them by downloading the relevant .pm files. But when these files cannot install, we do not have any cpan or cpanm.
I'd like to install, for example, HTML::Restrict. If I do the download + install thing, the Restrict.pm gives me this error:
/lib/HTML/Restrict.PM:328: Unknown command paragraph "=encoding UTF-8"
Reading a bit online suggests that this could be an old Perl problem. We use 5.8.x. Our own dev machines have the luxury of 5.16.x and internet access so installing module is a cinch. Anyway, one of my older machines also has 5.8.x, and installing the module via cpanminus worked there (with internet).
So, question: is it possible to install "cpanminus" (cpanm) through FTP, then upload specific module files to the server through FTP too, and then go into shell and install modules via cpanm by pointing it to respective .pm files?
Thank you for any pointers.
You should take a look at perldoc perlmodinstall which goes into detail about how to install a module from its distribution. It follows what should be a familiar incantation
Decompress
Unpack
Build
Test
Install
Assuming you're on a Linux system, this commonly takes take the form of
gzip -d My-Module-Distribution.tar.gz
tar -xof My-Module-Distribution.tar
perl Makefile.PL
make
make test
make install
But after the Unpack stage you will often find a README file or other text file that will describe any unusual steps to be taken
Clearly some of these steps can be combined. For instance, most people will probably want to use
tar -xvfz My-Module-Distribution.tar.gz
to avoid having to invoke gzip separately. Likewise, the make system will force a build phase as a prerequisite if you use just
make test
without the preceding make
The linked document has a lot to say about how to install on other platforms, should you not be running a Linux variant
I still don't really understand your thinking, but you can get a stand-alone version of cpanm using curl. For instance
curl -sS --location https://cpanmin.us/ --output cpanm
then you should be able to just copy it to your target machine, put it on your PATH, and do
cpanm HTML-Restrict-2.2.2.tar.gz
but I doubt if you will find any change to the specific errors you are getting
I have a large server with DDoS protection. I also have a setup for stopping layer 7 attacks.
I want to set up a reverse proxy to my website on my other server and have a check page similar to cloudflare's I'm Under Attack Mode.
Which only after displaying that check page and passing the check will the nginx reverse proxy pass the request onto my other server with the website.
There is absolutely ZERO documentation on this.
I have found https://index.hm/hashcat.html although there is many problems with this as you need perl modules. Which apt-get install nginx-extras doesn't have.
I am just looking for some guidance, thank you!
This question would probably be better on ServerFault (but I can't move it as I don't have enough rep)
HashCat isn't really production-ready software, but as its developer I can give you an overview on how to prepare your server for it:
It needs the ngx_http_perl_module module to run correctly, as I think you identified. As far as I'm aware, though, Debian does not compile nginx with the embedded Perl module by default. I think Red Hat does though, if it makes your life any easier.
You can activate the module by building nginx with the flag --with-http_perl_module.
Check out https://wiki.debian.org/BuildingAPackage#Get_the_source_package for a guide on compiling Debian packages - I've summarised it here for you.
apt-get install build-essentials
apt-get source nginx
sudo mk-build-deps -i -r nginx
cd nginx-xxxx
nano debian/rules
Add the configure flag "--with-http_perl_module" to the file. Now, we can recompile the package and produce a new .deb file
debuild -us -uc
Install the .deb
sudo dpkg -i ../nginx-xxxxx.deb
This should replace the nginx you have installed with a Perl-enabled version :-)
(P.S. Don't forget to run cpan Digest::SHA1 String::Util)
And to install HashCat, make a folder /usr/share/nginx/perl (if it doesn't already exist) and place the source files in it.
Does anyone know a step by step guide to deploy the own meteor app from windows to a webspace (not xxx.meteor.com).
I've found some tools like meteor.sh, but I'm a beginner and it's difficult without a guidance and without linux (needed to execute sh-files for example)
Make your project locally
Build your project locally, you could test it using meteor run or even meteor deploy xxx.meteor.com to see if its working
Bundle your app
Use meteor bundle deploy.tar.gz to make a file called deploy.tar.gz in your meteor directory containing your project
Upload your file to your server
This depends more on how your server is/what your platform is but you can use a tool to upload it for you (e.g Transmit on mac)
Install node.js & fibers on your platform if you don't have it already
This depends alot on your server platform. Have a look at http://nodejs.org/ for more detailed instructions
Extract your bundle
If on a *nix platform you could do the below in the directory where you uploaded your bundle (explanation):
tar -xzvf bundle.tar.gz
Enter the directory and install fibers
Fibers is needed for any meteor project, it helps use synchronous style code on server side javascript:
cd bundle/programs/server/node_modules
rm -r fibers
npm install fibers#1.0.1
The first line enters the directory in your bundle where fibers is installed, the second removes it, and the third reinstalls it.
Get MongoDB on another server or use a third party service like mongohq
Meteor production deployments need another mongodb. You can either install it on another server or use a third party server. It's not recommended to install it on the same server you install meteor on.
Finally check if your project is runnable
cd ../../../
node MONGO_URL=mongodb://dbuser:dbpassword#dbhost:dbport/meteor ROOT_URL=http://yourwebsite.com app.js
The first line gets you back to the bundle directory and the second runs node.js on your project with the parameters that let you connect to your mongodb database.
Install something to let it run in the background
It depends on which one you want to use, foreverjs is quite easy to use
npm install forever -g
If you get an error problem try using sudo before the npm (which lets you run as a super user).
Then you can run forever:
forever start MONGO_URL=mongodb://dbuser:dbpassword#dbhost:dbport/meteor ROOT_URL=http://yourwebsite.com app.js
And its done!
Extra notes
While its not that easy to get started from scratch this should help you get started. You still need to secure your mongodb server up if you've used your own servers.
The meteor.sh script does pretty much the same as above but very quickly if you learn to use that instead it might be faster to deploy updates
You might not have wget or a couple of commands that you might need that come up and give you Unknown command errors. Have a go at running yum or apt-get and see which one of the two you might have. You can then install the required package using one of these installer tools, i.e with yum install wget
I hope this helps you, its not that easy to deploy to a server on the first shot as a couple of things might be missing (files/packages/dependencies), you might run into other problems with permissions & stuff, but you could always ask on serverfault or here on stackoverflow on what you run into.
I recommend Meteoric.
Note, that you need to run meteoric from your development machine.
Script is self explanatory and works perfect for me.