So I got an demo ios project from different company but I can't launch it
Basically i get two errors:
Sometimes I also go an unsupported swift architecure error
I work on M2 processor and use XCode 14.2
Project does not have pods, all packages are managed via spm (that's what I was told)
For now i tried:
opening xcode via rosetta (nothing changed)
changing version of xcode to 14.0 (nothing changed)
using other swift version via toolchain (Swift 5.7), screen below ( get different erorrs but i dont think its a good way)
UPDATE
I downloaded version 14.0 of xcode and toolchain 5.7.2
When i use that version of xcode i get an error about missing classes from that sdk in scope and also some weird error from SentrySamplingProvider ( screens below)
I'm building a Swift static library with:
Xcode 13.2 (Swift compiler 5.5.2)
iOS Deployment target 12.0
Build library for distribution YES
Skip install NO
Swift language version 5 and tried with 4.2
Dependency managed with CocoaPods:
Japx 3.0.0
Alamofire 5.2.2
RxSwift
When I try to add it to an iOS project with this setup:
Xcode 13.3 (Swift compiler 5.6)
iOS Deployment target 12.0
Swift language version 5 and tried with 4.2
and build I get this error:
Failed to build module 'LibraryX'; this SDK is not supported by the compiler (the SDK is built with 'Apple Swift version 5.5.2 effective-4.2 (swiftlang-1300.0.47.5 clang-1300.0.29.30)', while this compiler is 'Apple Swift version 5.6 effective-4.2 (swiftlang-5.6.0.323.62 clang-1316.0.20.8)'). Please select a toolchain which matches the SDK.
These are the headers in the .swiftinterface
// swift-interface-format-version: 1.0
// swift-compiler-version: Apple Swift version 5.5.2 effective-4.2 (swiftlang-1300.0.47.5 clang-1300.0.29.30)
// swift-module-flags: -target arm64-apple-ios12.0 -enable-objc-interop -enable-library-evolution -swift-version 4.2 -enforce-exclusivity=checked -Onone -module-name LibraryX
Obviously if I build the project with the same compiler version or building the library with the iOS project everything works fine. But the purpose here is to release a precompiled library and not its source code.
Every time that I lookup this error online I've found "You have to set Build library for distribution to Yes"
I tried to add the source code of the static library to a new Framework project, but I get the same result.
I also had this error, in my case it was unable to import a sub-dependency of my XCFramework during reading .swiftinterface file, however was showing this absolutely misleading error.
After repeatedly cleaning up DerivedData and trying different Xcode versions (13.0, 13.4.1) I've seen 2 errors: "this SDK is not supported by the compiler", and "No module named 'AnotherLib'" which was an incorrectly specified dependency inside of my Swift Package.
So, maybe only first part of the message is correct "Failed to build module 'LibraryX'", but the reason is something else, NOT the difference in compiler versions.
After I updated my App to Swift 4 I get this error message:
error: The following binaries use incompatible versions of Swift:
/Users/Konrad/Library/Developer/Xcode/DerivedData/ExploreYourCity-btthjezgywzvnmduiurzwgwzrven/Build/Products/Debug-iphoneos/Cosmos/Cosmos.framework/Cosmos
/Users/Konrad/Library/Developer/Xcode/DerivedData/ExploreYourCity-btthjezgywzvnmduiurzwgwzrven/Build/Products/Debug-iphonesimulator/ExploreYourCity.app/ExploreYourCity
I can not find a solution to this misstake. Whats wrong?
Library setup method: CocoaPods
Version of the library. Example: 12.0.1.
Xcode version. Example:9.0.1.
OS version. Example: iOS 11.0.
*Swift Version: Swift 4.0.
1) Select Project in Project Navigator.
2) Go to General Tab.
3) Remove everything under Embedded Binaries.
4) Remove everything under Linked Frameworks and Libraries except Pods_*.framework
5) Clean, Build and Run.
I upgraded Xcode to 8.1 GM and am now getting the below error for SwiftyJSON. Other imported frameworks seem to work. Is there a way to force this to work in Swift 3 until SwiftyJSON upgrades their framework? I used Carthage to import/update frameworks. I also tried changing Use Legacy Swift language version On and Off to no avail.
Module compiled with Swift 3.0 cannot be imported in Swift 3.0.1:
Modules/SwiftyJSON.swiftmodule/arm64.swiftmodule
SwiftyJson is being downloaded precompiled by carthage. The precompiled download is with Swift Version 3.0. That makes the compiler complain that the version is not correct. Using the following command:
carthage update --platform iOS --no-use-binaries
SwiftyJson (and all other frameworks within Carthage) will be compiled locally using the local version of Swift (3.0.1) and the compiler will not complain anymore.
Remove the app chache from DerivedData, and rebuild. the error may be fixed.
The DerivedData path like this:
~/Library/Developer/Xcode/DerivedData/
Make sure you've placed the new XCode 8.1 GM package in your Applications folder. We ran into this issue when one of us was running Carthage to update our dependencies, but had not replaced the XCode old 8.0 application in the applications folder (8.1 GM was running off the Desktop).
You want to make sure that when you run the following in terminal: xcrun swift -version that it returns Apple Swift version 3.0.1.
Updating default Xcode to new one on terminal worked for me.
Step 1 : Use following command to update Xcode version to latest on Terminal. Ref
sudo xcode-select -switch <path/to/>Xcode.app
Step 2 : Now try carthage update command
carthage update --platform iOS
Just to give the latest updates:
Carthage has released version 0.20 on Feb 27, 2017.
Carthage now only uses the pre-build binary if available pre-build binary is compatible.
That is being said, you no longer have to use: --no-use-binaries to avoid incompatible pre-build framework.
So make sure that you have carthage version greater than 0.20 and simply do:
carthage update --platform iOS
Just like #zirinisp said:
You can Using the following command:carthage update --platform iOS --no-use-binaries
Using the following command:xcrun swift -version to see the Swift version
Do this: Xcode->preferences->locations to clear the derived data and archives data, the most important to change the command line tools to "Xcode 8.1"
Using the following command:xcrun swift -version,you can see the swift version is 3.0.1
Set Use Legacy Swift Language Version = NO
I hope it will help you
Move the beta/GM version if the Xcode to /Applications folder and name it Xcode-beta
Check the output of:
xcrun swift --version
by running this command in terminal, its output should match with the swift version you want the app to compile, because Carthage uses output of this command, to determine the local Swift version.
Update Xcode version to latest on Terminal by running following command:
sudo xcode-select -s /Applications/Xcode-beta.app/
Build the libraries for iOS and prevents Carthage from downloading existing (yet incompatible) precompiled binaries, by running following command:
carthage update --platform iOS --no-use-binaries
Clean & Build
I had exactly the same issue with the library XCTest_Gherkin, what it worked for me was:
Product -> Scheme -> XCTest-Gherkin
Product -> Build
Hope it helps. I am using Cocoapods.
In Xcode Build Settings make sure your Framework Search Paths contain the appropriate Carthage Build folder:
$(inherited)
$(PROJECT_DIR)/Carthage/Build/iOS
I was following the instructions here, but was not able to get vapor working on my mac. Here're my xcode and swift versions
Xcode 8.0
Build version 8S174q
Apple Swift version 3.0-dev (LLVM 8fcf602916, Clang cf0a734990, Swift 000d413a62)
Target: x86_64-apple-macosx10.9
When I try to install the toolbox using this command
curl -sL toolbox.qutheory.io | bash
The installation is unsuccessful and yields this message
⚠️ It looks like your Command Line Tools version is incorrect.
Make sure Xcode > Preferences > Locations > Command Line Tools is set correctly.
Correct: Xcode 8.0 (8S162m)
Current: Xcode 8.0
Build version 8S174q
⚠️ It looks like your Swift install location has been modified.
Correct: /usr/bin/swift
Current: /Users/<name>/.swiftenv/shims/swift
❌ Incompatible
Reason: Invalid Swift version
Output must contain 'swiftlang-800.0.33.1'
Current 'swift -version' output:
Apple Swift version 3.0-dev (LLVM 8fcf602916, Clang cf0a734990, Swift 000d413a62) Target: x86_64-apple-macosx10.9
📖 Visit our docs for step-by-step instructions on installing Swift correctly.
http://docs.qutheory.io
👋 or Join our Slack and we'll help you get setup.
http://slack.qutheory.io
From this, I can gather that my swift location is wrong (I don't remember changing it) and that my xcode build number is wrong (because xcode beta 2 is no longer available for download, so I got xcode beta 3.)
Can anybody help me to get this working without changing too much, or is this framework still too finicky to work with a slightly different setup?
Unfortunately it's impossible to create packages that work between different Swift 3 development previews because of how much changes in each preview. Things that compiled today might not compile tomorrow and there is no way to selectively target a given preview in code.
Because of this, the Swift version declared in https://github.com/qutheory/vapor#-current-environment for a given Vapor version must be the one used.
Vapor 0.14 relied on the Swift 3.0 preview 2 version that comes with Xcode 8 beta 2. There is currently no way to download Xcode 8 beta 2 now that Apple has stopped hosting it upon the release of Xcode 8 beta 3. That was an oversight.
Vapor 0.15 will not rely on Xcode 8 beta previews and should be released in a few days.
Open Xcode and make sure the correct SDK is selected:
👀 Xcode > Preferences > Locations > Command Line Tools
Select XCode 8
Then continue with the tutorial you are following.