I am trying to concatenate three lines (I want to leave the lines as is; 3 rows) from Shakespeare.txt file that shows:
To be,
or not to be:
that is the question.
My code right now is
fid = fopen('Shakespeare.txt')
while ~feof(fid)
a = fgets(fid);
b = fgets(fid);
c = fgets(fid);
end
fprintf('%s', strcat(a, b, c))
I'm supposed to use strcat and again, I want concatenated and leave them as three rows.
One method of keeping the rows separate is by storing the lines of the text file in a string array. Here a 1 by 3 string array is used. It may also be a good idea to use fgetl() which grabs each line of the text file at a time. Concantenating the outputs of fgetl() as strings may also be another option to ensure the they do not get stored as character (char) arrays. Also using the \n indicates to line break when printing the strings within the array String_Array.
fid = fopen('Shakespeare.txt');
while ~feof(fid)
String_Array(1) = string(fgetl(fid));
String_Array(2) = string(fgetl(fid));
String_Array(3) = string(fgetl(fid));
end
fprintf('%s\n', String_Array);
Ran using MATLAB R2019b
I'm trying to write a CSV from a table using writetable with writetable(..., 'WriteRowNames', true), but when I do so, Matlab defaults to putting Row in the (1,1) cell of the CSV. I know I can change Row to another string by setting myTable.Properties.DimensionNames{1} but I can't set that to be blank and so it seems like I'm forced to have some text in that (1,1) cell.
Is there a way to leave the (1,1) element of my CSV blank and still write the row names?
There doesn't appear to be any way to set any of the character arrays in the 'DimensionNames' field to either empty or whitespace. One option is to create your .csv file as you do above, then use xlswrite to clear that first cell:
xlswrite('your_file.csv', {''}, 1, 'A1');
Even though the xlswrite documentation states that the file argument should be a .xls, it still works properly for me.
Another approach could use memmapfile to modify the leading bytes of the file in memory.
For example:
% Set up data
LastName = {'Smith';'Johnson';'Williams';'Jones';'Brown'};
Age = [38;43;38;40;49];
Height = [71;69;64;67;64];
Weight = [176;163;131;133;119];
BloodPressure = [124 93; 109 77; 125 83; 117 75; 122 80];
T = table(Age, Height, Weight, BloodPressure, 'RowNames', LastName);
% Write data to CSV
fname = 'asdf.csv';
writetable(T, fname, 'WriteRowNames', true)
% Overwrite row dimension name in the first row
% Use memmapfile to map only the dimension name to memory
tmp = memmapfile(fname, 'Writable', true, 'Repeat', numel(T.Properties.DimensionNames{1}));
tmp.Data(:) = 32; % Change to the ASCII code for a space
clear('tmp'); % Clean up
Which brings us from:
Row,Age,Height,Weight,BloodPressure_1,BloodPressure_2
Smith,38,71,176,124,93
Johnson,43,69,163,109,77
Williams,38,64,131,125,83
Jones,40,67,133,117,75
Brown,49,64,119,122,80
To:
,Age,Height,Weight,BloodPressure_1,BloodPressure_2
Smith,38,71,176,124,93
Johnson,43,69,163,109,77
Williams,38,64,131,125,83
Jones,40,67,133,117,75
Brown,49,64,119,122,80
Unfortunately not quite deleted, but it's a fun approach.
Alternatively, you can use MATLAB's low level file IO to copy everything after the row dimension name to a new file, then overwrite the original:
fID = fopen(fname, 'r');
fID2 = fopen('tmp.csv', 'w');
fseek(fID, numel(T.Properties.DimensionNames{1}), 'bof');
fwrite(fID2, fread(fID));
fclose(fID);
fclose(fID2);
movefile('tmp.csv', fname);
Which produces:
,Age,Height,Weight,BloodPressure_1,BloodPressure_2
Smith,38,71,176,124,93
Johnson,43,69,163,109,77
Williams,38,64,131,125,83
Jones,40,67,133,117,75
Brown,49,64,119,122,80
No, that is currently not supported. The only workaround I see is to use a placeholder as dimension name and to programmatically remove it from the file afterwards.
writetable(T,fileFullPath,'WriteVariableNames',false);
When specify 'WriteVariableNames' as false (default one is true), then the variable/dimension names will NOT be written in the output file.
Ref link: https://uk.mathworks.com/help/matlab/ref/writetable.html
I have a .txt file with rows consisting of three elements, a word and two numbers, separated by commas.
For example:
a,142,5
aa,3,0
abb,5,0
ability,3,0
about,2,0
I want to read the file and put the words in one variable, the first numbers in another, and the second numbers in another but I am having trouble with textscan.
This is what I have so far:
File = [LOCAL_DIR 'filetoread.txt'];
FID_File = fopen(File,'r');
[words,var1,var2] = textscan(File,'%s %f %f','Delimiter',',');
fclose(FID_File);
I can't seem to figure out how to use a delimiter with textscan.
horchler is indeed correct. You first need to open up the file with fopen which provides a file ID / pointer to the actual file. You'd then use this with textscan. Also, you really only need one output variable because each "column" will be placed as a separate column in a cell array once you use textscan. You also need to specify the delimiter to be the , character because that's what is being used to separate between columns. This is done by using the Delimiter option in textscan and you specify the , character as the delimiter character. You'd then close the file after you're done using fclose.
As such, you just do this:
File = [LOCAL_DIR 'filetoread.txt'];
f = fopen(File, 'r');
C = textscan(f, '%s%f%f', 'Delimiter', ',');
fclose(f);
Take note that the formatting string has no spaces because the delimiter flag will take care of that work. Don't add any spaces. C will contain a cell array of columns. Now if you want to split up the columns into separate variables, just access the right cells:
names = C{1};
num1 = C{2};
num2 = C{3};
These are what the variables look like now by putting the text you provided in your post to a file called filetoread.txt:
>> names
names =
'a'
'aa'
'abb'
'ability'
'about'
>> num1
num1 =
142
3
5
3
2
>> num2
num2 =
5
0
0
0
0
Take note that names is a cell array of names, so accessing the right name is done by simply doing n = names{ii}; where ii is the name you want to access. You'd access the values in the other two variables using the normal indexing notation (i.e. n = num1(ii); or n = num2(ii);).
how do I insert a string into a csv file in matlab. i used this code to write some data and create my csv file:
and here is the output of the code:
I'm trying to insert some text in the first 2 columns before the numerical data..
thanks in advance :)
There are several approaches are possible here.
Let's take a look at some of them:
If you need to add string to your csv file.
For example, I create some csv file like your:
q = [1 2 3 4 5 6 7];
csvwrite('csvlist4.csv',q,2,0);
All troubles is to add some string to csv - it's because we need to combine numeric and text data. There are no good functions for it in Matlab except low levels:
c = 'some big text';
fid = fopen('csvlist4.csv','r+');
fprintf(fid,c);
How it works: the data in csv is an array. I put data in 3rd row, so first and second is an empty but they have ','. When you use fprintf it will replace this , with your text. So if text is too long it will overwrite your data.
How to avoid this?
Easiest way - is to do it with help of xlswrite function. For your example:
txt = cell(size(Q))
txt{1} = 'this is your text'
X = [txt; num2cell(Q)]
xlswrite('new.xlsx',X)
Result:
Important moment here: number of cell for text must be the same as your data. But I filled with the text only first cell in my example.
And the one more way: read csv file, modify it's data and write to csv:
csvwrite('csvlist4.csv',a,2,0);
m = csvread('csvlist4.csv');
fid = fopen('csvlist4.csv','w');
c = 'your text'
fprintf(fid, c); fprintf(fid, '\n');
fclose(fid);
dlmwrite('csvlist4.csv', m(3:end,:), '-append');
Of course you can use cell array instead c and so on and so on.
Hope it helps!
The following code generates a similar dataset to what I am currently working with:
clear all
a = rand(131400,12);
DateTime=datestr(datenum('2011-01-01 00:01','yyyy-mm-dd HH:MM'):4/(60*24):...
datenum('2011-12-31 23:57','yyyy-mm-dd HH:MM'),...
'yyyy-mm-dd HH:MM');
DateTime=cellstr(DateTime);
header={'DateTime','temp1','temp2','temp4','temp7','temp10',...
'temp13','temp16','temp19','temp22','temp25','temp30','temp35'};
I'm trying to convert the outputs into one variable (called 'Data'), i.e. have header as the first row (1,:), 'DateTime' starting from row 2 (2:end,1) and running through each row, and finally having 'a' as the data (2:end,2:end) if that makes sense. So, 'DateTime' and 'header' are used as the heading for the rows and column respectively. Following this I need to save this into a tab delimited text file.
I hope I've been clear in expressing what I'm attempting.
An easy way, but might be not the fastest:
Data = [header; DateTime, num2cell(a)];
filename = 'test.txt';
dlmwrite(filename,1); %# no create text file, not Excel
xlswrite(filename,Data);
UPDATE:
It appears that xlswrite actually changes the format of DateTime values even if it writes to a text file. If the format is important here is the better and actually faster way:
filename = 'test.txt';
out = [DateTime, num2cell(a)];
out = out'; %# our cell array will be printed by columns, so we have to transpose
fid = fopen(filename,'wt');
%# printing header
fprintf(fid,'%s\t',header{1:end-1});
fprintf(fid,'%s\n',header{end});
%# printing the data
fprintf(fid,['%s\t', repmat('%f\t',1,size(a,2)-1) '%f\n'], out{:});
fclose(fid);