I have a chart that shows the number of departures for a given 15 minute interval as seen here.
I need to compound these counts backwards for one hour. For example, the 3 departures shown at 11:00 need to also be represented at the 10:00, 10:15, 10:30, and 10:45 columns. When completed, the 10:00 would have a total of 6 departures (10:15 -> 6, 10:30 ->5, 10:45 -> 4, 11:00 -> 4).
I have done this via VBA in excell, but am now needing to replicate the chart in Tableau and have been beating my head in for about two weeks now. I'd love to hear any and all suggestions.
You can use a Cartesian join against a large enough date range of your choosing to in effect resample your data and add the additional time intervals you desire.
For example, if you have a month's worth of data (min date -> max date = 30 days), then you have (30 * 24 * 4) 2880 15 minute intervals.
Create all those intervals in a separate data sheet
Add a bogus column with value of link for all rows
Create the same bogus in your actual data source
Join the two sheets together on the link column
Create a calculated field that is something along the following:
[Interval] <= [Flight Time] AND [Interval] >= DATEADD('hour',-1,[Flight Time])
This calculated field will evaluate to TRUE when the interval time is within one hour before the flight time. You can then drag this field onto your filter shelf and select TRUE value only. Effectively your [Interval] field becomes your new date field.
I would recommend adding that filter to the context and applying across the entire datasource. Before you add this filter you'll have 2880 times the about of data so be sure to do a live view first. Be careful with extracts using Cartesian joins as you could potentially be extracting more than you bargained for.
See the following links for different techniques on how to do this and re-sampling dates in general in tableau.
https://community.tableau.com/thread/151387
Depending on the size of your data (and if a live view is not necessary) it is often times easier and more efficient to do this type of pre-processing outside of tableau in SQL or something like python's pandas library.
Here is another solution provided from the Tableau Cumunity Forum. I have not tried tyvich's solution yet, but I know this one got me where I needed. Please follow the link to see the solution using moving table calculations.
https://community.tableau.com/thread/251154
Related
When I apply Month/Year to Cases or Deaths from my data, the values explode. For Cases it goes from approximately 48 million to over 1 billion, and for Deaths it goes from about 700 thousand to over 22 million. However, when I try the same thing with Initial Claims or the Stringency Index, my values remain correct. I'm trying to find the month over month percentage change by the way. And I'm using the Date column. I only select 2020 and 2021 in the filter for Year.
What I'm asking about is Sheet 21.
Link to workbook: https://public.tableau.com/app/profile/nilajah.rivers/viz/CoronaVirusProject_16323687296770/Sheet21
Your problem is that the data points are daily cumulative deaths. If you change the date aggregation to anything other than days, Tableau will default to summing the numbers for all the days in the month. This will give the wrong result, obviously.
If you want to show the correct total deaths or cases regardless of the time aggregation (months, days, weeks etc.) then you could use the New Case or New Death numbers plus a running sum table calculation. This will always give the correct total for the time period.
Table calculations will also allow automatic calculation of the period to period % change from the same data fields.
This is a common problem when working with datasets that offer pre-calculated aggregations. Tableau doesn't need that as it can dynamically calculate the aggregation of a field over any given time period but it is easy to forget which field has pre-aggregated data and which has raw data. Pre-aggregated fields assume a particular time period and can't be used for different time periods without disentangling that assumption (which is unnecessary if you also have the raw data (in this case daily new deaths/cases).
I'm trying to understand if it's possible to calculate a 1 month sum of revenue data in one of my measurements. For each day, I would like the sum of the previous 30 days.
Is this possible in InfluxDB or through Grafana's query interface?
A moving average is a moving sum, divided by the number of samples. So if you want a moving sum of the past 30 values:
select 30*moving_average(field_name, 30) from measurement
Edited to add:
As Peter Halicky points out in the comments, this is is not the past 30 days. It's the past 30 data points.
If you will always have data for every single day, it's not an issue.
If you're missing a day's data, you'll still get a 30-sample average, but it'll stretch over 31 days instead of 30.
If you don't actually care about the calendar, but want to know the past 30 days of activity, this is not a problem.
If it is a problem, there are a few work-arounds. One that's probably trickier than it sounds: ensure that there is always an entry for each day.
A more robust way is to have the reporting app do this in two steps. Something like this (haven't worked out all the details, but you get the idea):
find the number of data points in the past 30 days, using a query like select count(field_name) from measurement where time > now() - 30d.
Use this number (call it n) to form the query: select n*moving_average(field_name, n) from measurement where time > now - 30d.
Yes, definitely it's possible.
Just set this part of your query like this:
SELECT sum("value") FROM "YOUR_TAG_NAME"
WHERE $timeFilter GROUP BY time(30d) fill(null)
Just make sure that your dashboard time included Last 30 days (at least).
I am a very basic user of tableau and I have not found an answer to my question.
I have a txt file that has historical daily data for 98% of all the stocks in the US, with their daily capitalization. Each stocks has its TICKER, Daily Market Value for every trading day of the year, and its SECTOR.
I did a simple time series that display SUM([Mktval]) (sum of all individual market values) across all stocks, on a daily daily, and where I can see that the total value as of 2016 is about 24 Trillion USD, as in the image below.
When I change the view column from DAY to YEAR, I don't see the right values, but something a lot larger. So I realized that I need to do SUM([Mktval])/252 to get the right value for a year (there are 252 trading days in a year).
If I change the view to MONTH, as in the chart below, the numbers are again wrong because 252 is not the right value to use in the division.
Is there any way that Tableau can adjust the values automatically to reflect the AVG MktVal across different time intervals?
Thanks
Replace SUM(Mktval) on the Rows shelf with the following calculated field
avg({ fixed day(Date1) : sum(Mktval) })
That solution is all in one step. It is perhaps a bit more clear to use 2 steps. First, create a calculated field called total_daily_market_value defined as
{ fixed day(Date1) : sum(Mktval) }
Then make sure that calculated field is a measure. It is an LOD calculation that you can think of as a separate table with one value for each day showing the total market value for that day.
Drag that measure to a shelf, and then change the aggregation function to AVG(), MEDIAN(), MIN(), MAX() or STDEV() as desired. Tableau will aggregate the total_daily_market_value using your chosen aggregation function for whatever values of Date1 are in your view.
My input text source always contains last 12 months worth of data. e.g: Current month is October. So My input source contains data starting from last Oct 1st to till date. But I want the aggregate statistics to be displayed on a daily basis for last 10 days of sales , 30 days of sales, 45 days of sale per product across various regions
I am trying to use window_avg fuction with something like window_avg(sum(sales), first() + datediff('day', window_min(min([date]))-1, dateadd('month',1,window_min(min([Date]))-1)) * 13,13) something like that. But I am not able to crack the exact logic.
Could you please suggest me some better way to achieve this, rather than using these kind of calculations. Also I am afraid if this goes wrong if there is data missing in the middle one or two days.
Any help is appreciated.
A very simple thing is to use a relative date filter. There's a UI for you to select they last N days.
Put the date on the columns shelf and set it to the date truncation of year-month-days. Put your measure row shelf. Put the date pill on the filter shelf too and use a relative date filter.
If you are doing simple aggregate like the sum of sales for a day it's easy and you'll not need to do anything else. You can can also fairly easily create a table calculation by right clicking on the measure and choosing one of the quick table calculations. Even when I'm doing a more sophisticated calculation, I start with a quick table calculation and then start editing.
If you are doing something like a moving average, the filter and the moving average can interact. For example, if I'm showing a 5 day trailing moving average over 30 day period, the first few days do not get averaged in the same way -- you don't have days over 30 days ago. If that's not really an issue for you, that's cool and you are done.
If it is an issue, it's going to be trickier. I'd suggest creating a second filter based on a table calc. The reason is the order of operations in Tableau. The raw data is filtered then aggregated by the database, then the table calcs are performed. If there are any filters on table calculations, then they are filtered after that. So basically, in my example, you want create a filter for 35 days on the date, then create a table calc on the date -- like using the INDEX() function. Filter the index function to show 30 days worth, then you've got a moving average that uses 35 days to compute the average, but only shows 30.
We have data that is submitted that is only YTD numbers. I'm wondering how I could display numbers that are subtracted along the Date field.
Ie, if I want to show the MTD movement on March. I will have to go March less February.
Now I know I can do this for individual measure fields. But having around 40+ measures seems a bit tedious.
http://kb.tableausoftware.com/articles/knowledgebase/creating-ytd-mtd-calculations
I tried to enter "Measure Values" but that is not a valid measure to put in the calculation.
Is there a way to set up a custom dimension?
Thanks,
Gem
After days of research, can't be done in tableau unless you want to labour for a week creating an almost cell by cell calculation. Data transformation in SQL will be a more feasible solution.
I had pivoted the data previously in SQL, so that I end up with 1 measure column instead of 40+. That enables you to minimise the calculation fields, so that you don't have to repeat all the calculation for individual measures.
Works well. Not for ratios though, as you will need to extract individual measures again so that you can divide them against each other. It's got pros and cons. Number of rows in the DB also multiplies.
Other solutions that preserves the table structure will be to use temp tables and do calculations on several temp tables.