I have added posts to firebase and I am wondering how I can pull the posts chronologically based on when the user has posted them.
My Database is set up like below
The first node after comments is the User ID and then the posts are underneath that. Obviously, these posts are in order, however if a new user posts something in between "posting" and "another 1" ,for example, how would I pull that so it shows up in between.
Is there a way to remove the autoID and just use the userID as a key? The problem I am running into is the previous post is overwritten then.
I am accepting the answer as it is the most thorough. What I did to solve my problem was just create the unique key as the first node and then use the UID as a child and the comment as a child. Then I pull the unique key's as they are in order and find the comment associated with the uid.
The other answers all have merit but a more complete solution includes timestamping the post and denormalizing your data so it can be queried (assuming it would be queried at some point). In Firebase, flatter is better.
posts
post_0
title: "Posts And Posting"
msg: "I think there should be more posts about posting"
by_uid: "uid_0"
timestamp: "20171030105500"
inv_timestamp: "-20171030105500"
uid_time: "uid_0_ 20171030105500"
uid_inv_time: "uid_0_-20171030105500"
comments:
comment_0
for_post: "post_0"
text: "Yeah, posts about posting are informative"
by_uid: "uid_1"
timestamp: "20171030105700"
inv_timestamp: "-20171030105700"
uid_time: "uid_1_20171030105700"
uid_inv_time: "uid_1_-20171030105700"
comment_1
for_post: "post_0"
text: "Noooo mooooore posts, please"
by_uid: "uid_2"
timestamp: "20171030110300"
inv_timestamp: "-20171030110300"
uid_time: "uid_2_20171030110300"
uid_inv_time: "uid_2_-20171030110300"
With this structure we can
get posts and their comments and order them ascending or descending
query for all posts within the last week
all comments or posts made by a user
all comments or posts made by a user within a date range (tricky, huh)
I threw a couple of other key: value pairs in there to round it out a bit: compound values, query-ing ascending and descending, timestamp.
You can not use the userID as key value instead of the autoID, because the key must be unique, thats why Firebase just updates the value and does not add another one with the same key. Normally Firebase nodes are ordered chronologically by default, so if you pull the values, those should be in the right order. However if you wanna make sure about that, you can add a timestamp value and set a server timestamp. After pulling the data you can order it by that timestamp (I think there is actually a timestamp saved automatically by firebase that you can access somehow, but you need to look that up in the documentation). If I got it right, in order to accomplish what you want, you need to change the structure of your database. For example you could maybe use the autoID but save the userID you wanted to use as key as a value if you need that. Hope I got your idea right, if not just be more precise and I will try to help.
Firebase keys are chronological by default - it's built into their key generation algorithm. I think you need to restructure/rethink your data.
Your POSTS database should (possibly) have the comments listed with each post, and then you can duplicate on the user record if needed for faster retrieval if they need to be accessed by user. So something like:
POSTS
- post (unique key)
- title (text)
- date (timestamp)
- comments
- comment (unique key)
- text (text)
- user_id (user key)
- date (timestamp)
When you pull the comments, you shouldn't be pulling them from a bunch of different users. That could result it a lot of queries and a ton of load time. Instead, the comments could be added (chronologically of course) to the post object itself, and also to the user if you want to keep a reference there. Unlike in MySQL, NoSQL databases can have quite a bit of this data duplication.
Related
I'm attempting to use mongodb to implement a simple messaging system between two users in mongo. I want to be able to take two users, user0 and user1, and search for their entry in a collection. If the entry for those two users doesn't exist I want to create it and then add the message that was sent to its message field. If it does exist I just want to push the message to the message field.
I'm not really sure the best way to implement this.
db.privateChat.update(
{between:{$all:['user0', 'user1']}},
{$push:{message:'text'}}, {upsert:true}
)
And other similar entry schemes but they don't work. They produce the error:
"Cannot create base during insert of update. Caused by :ConflictingUpdateOperators Cannot update 'between' and 'between' at the same time"
I can think of other ways to do this producing a symmetric key (where the order of the users don't matter for the purposes of the search) from say adding the hashes together or a query that checks if either messenger0 or messenger1 is either user0 or user1 but these don't seem like great ways of doing it. Is this totally the wrong approach?
Thanks.
I think this could be solved by design.
let say that we have document in collection chats;
chat{
_id,
between[arrayOfIds],
startTime,
events[
{message:{
fromUserId,
timeStamp,
data}
}}
]}
}
then messages will be stored in message object inside chat .
App will be aware of chat _id so there will be no issues when you will have a group chat between more than 2 users.
This approach will allow you to prevent overflowing document size limitation as you could start new chat entry every week, day, etc...
Have a fun!
Posting data to firebase generate new items similar to the following example:
log
-K4JVL1PZUpMc0r0xYcw
-K4jVRhOeL7fH6CoNNI8
-K4Jw0Uo0gUcxZ74MWBO
I struggle to find how to e.g. delete entries that is older than x days - preferably with the REST API. Suggestions appreciated.
You can do a range query.
This technique requires you to have a timestamp property for each record.
Using orderBy and endAt you can retrieve all of the items before a specified date.
curl https://<my-firebase-app>.firebaseio.com/category/.json?orderBy="timestamp"&endAt=1449754918067
Then with the result, you can delete each individual item.
I am using Sphinx (with Thinking Sphinx v2.0 for RoR plugin),
Lets say I have several indexes on User model, lets say on 'name', 'address' and its one-to-many associations like 'posts' , 'comments' etc.
This means searching by post content would return me the User who made the post, and using :fieldmask 'rank mode' of sphinx, I am able to determine that the user was searched due to matching of 'posts'. But user has 'many' posts. So how to determine which 'post' it matched.
Is there any way, while indexing I can specify the index dynamically.?
For e.g. If I can specify index 'post_1'='< post1content >' , 'post_5'='< post5content >' as different 'fields' for user1; similarly 'post_2', 'post_7' for user2, Thus after searching It would return me user2 matched with matching fields as post_7...
Sphinx can't have different fields for each record, I'm afraid, so what you're hoping to do isn't possible with that approach.
If you need to know which posts match a query, I'd recommend conducting the search on the Post model instead, and then you can refer to a post's user? You could sort by user_id before weight, or group by user_id (so only one post per user is returned)? You'd be able to bring in user data into the Post index definition (and if a post has one user, then that data is kept to single values, instead of many, per record).
Hope this gives you some clarity with your options.
If you know, you want to search for post_5 in one query, and for post_7 in another query, you may use json as {post_1:, post_2:}.
Problem is that you have to know number of post you are searching for.
Maybe look to: https://stackoverflow.com/a/24505347/1444576 -if it is similar to your example.
I'm working on a voting site and I'm wondering how I should handle votes.
For example on SO when you vote for a question (or answer) your vote is stored, and each time I go back on the page I can see that I already voted for this question because the up/down button are colored.
How do you do that? I mean I've several ideas but I'm wondering if it won't be an heavy load for the database.
Here is my ideas:
Write an helper which will check for every question if a voted has been casted
That's means that the number of queries will depends on the number of items displayed on the page (usually ~20)
Loop on my items get the ids and for each page write a query which will returns if a vote has been casted or NULL
Looks ok because only one query doesn't matter how much items on the page but may be break some MVC/Domain Model design, dunno.
When User log in (or a guest for whom an anonymous user is created) retrieve all votes, store them in session, if a new vote is casted, just add it to the session.
Looks nice because no queries is needed at all except the first one, however, this one and, depending on the number of votes casted (maybe a bunch for each user) can increase the size of the session for each users and potentially make the authentification slow.
How do you do? Any other ideas?
For eg : Lets assume you have a table to store votes and the user who cast it.
Lets assume you keep votes in user_votes when a vote is cast with a table structure something like the below one.
id of type int autoincrement
user_id type int, Foreign key representing users table
question_id type of int, Foreign key representing questions table
Now as the user will be logged in , when you are doing a fetch for the questions do a left join with the user_id in the user_votes table.
Something like
SELECT q.id, q.question, uv.id
FROM questions AS q
LEFT JOIN user_votes AS uv ON
uv.question_id = q.id AND
uv.user_id = <logged_in_user_id>
WHERE <Your criteria>
From the view you can check whether the id is present. If so mark voted, else not.
You may need to change your fields of the questions table and all. I am assuming you store questions in questions table and users in user table so and so. All having the primary key id .
Thanks
You could use a combination of your suggested strategies.
Retrieve all the votes made by the logged in user for recent/active questions only and store them in the session.
You then have the ones that are more likely to be needed while still reducing the amount you need to store in the session.
In the less likely event that you need other results, query for just those as and when you need to.
This strategy will reduce the amount you need to store in the session and also reduce the number of calls you make to your database.
Just based on the information than you've given so far, I would take the second approach: get the IDs of all the items on the page, and then do a single query to get all the user's votes for that list of item IDs. Then pass the collection of the user's item votes to your view, so it can render items differently when the user has voted for that item.
The other two approaches seem like they would tend to be less efficient, if I understood you correctly. Using a view helper to initiate an individual query for each item to check if the user has voted on it could lead to a lot of unnecessary queries. And preloading all the user's voting history at login seems to add unnecessary overhead, getting data that isn't always needed and adding the burden of keeping it up to date for the duration of the session.
I have User model object with quite few fields (properties, if you wish) in it. Say "firstname", "lastname", "city" and "year-of-birth". Each user also gets "unique id".
I want to be able to search by them. How do I do that properly? How to do that at all?
My understanding (will work for pretty much any key-value storage -- first goes key, then value)
u:123456789 = serialized_json_object
("u" as a simple prefix for user's keys, 123456789 is "unique id").
Now, thinking that I want to be able to search by firstname and lastname, I can save in:
f:Steve = u:384734807,u:2398248764,u:23276263
f:Alex = u:12324355,u:121324334
so key is "f" - which is prefix for firstnames, and "Steve" is actual firstname.
For "u:Steve" we save as value all user id's who are "Steve's".
That makes every search very-very easy. Querying by few fields (properties) -- say by firstname (i.e. "Steve") and lastname (i.e. "l:Anything") is still easy - first get list of user ids from "f:Steve", then list from "l:Anything", find crossing user ids, an here you go.
Problems (and there are quite a few):
Saving, updating, deleting user is a pain. It has to be atomic and consistent operation. Also, if we have size of value limited to some value - then we are in (potential) trouble. And really not of an answer here. Only zipping the list of user ids? Not too cool, though.
What id we want to add new field to search by. Eventually. Say by "city". We certainly can do the same way "c:Los Angeles" = ..., "c:Chicago" = ..., but if we didn't foresee all those "search choices" from the very beginning, then we will have to be able to create some night job or something to go by all existing User records and update those "c:CITY" for them... Quite a big job!
Problems with locking. User "u:123" updates his name "Alex", and user "u:456" updates his name "Alex". They both have to update "f:Alex" with their id's. That means either we get into overwriting problem, or one update will wait for another (and imaging if there are many of them?!).
What's the best way of doing that? Keeping in mind that I want to search by many fields?
P.S. Please, the question is about HBase/Cassandra/NoSQL/Key-Value storages. Please please - no advices to use MySQL and "read about" SELECTs; and worry about scaling problems "later". There is a reason why I asked MY question exactly the way I did. :-)
Being able to query properties directly is one of the features you lose when moving away from SQL, so you need a way to maintain your own index to let you find records.
If your datastore does not have built in indexing or atomic list operations, you will need to deal with the locking issues you mention. However, indexing doesn't necessarily need to be synchronous - maintain a queue of updated records to be reindexed and you have a solution for 3 that can be reused to solve 2 also.
If the index list for a particular value becomes too large for the system to handle in a single list, you can replace the list of users with a list of lists. However, if you have that many records with the same value it probably isn't a particularly useful search criteria anyway.
Another option that is useful in some cases is to use a seperate system for the indexing - for example you could set up lucene to index the records in your main datastore.
I guess i would have implemented this as a MapReduce job, which would run on schedule.
Each search word, would be a row-key with lookup to UID.
Rowkey:uid1
profile:firstName: Joe
profile:lastName: Doe
profile:nick: DoeMaster
Rowkey: uid2
profile:firstName: Jane
profile:lastName: Doe
profile:nick: SuperBabe
MapReduse indexes all searchable properties and add them with search word as row key
Rowkey: Jane
lookup:uid: uid2
Rowkey: Doe
lookup:uid: uid2, uid1
Rowkey: DoeMaster
lookup:uid: uid1
..etc
Now, if you need to update the index list on the fly as a user change, you would write the change directly to the index base, by remove uid value from index and add to another row key. In case of this happens at the same time, temporary locking could be implemented.
For users being removed, an additional attribute telling the state of the user could be use to filter them out from search.
Adding additional search word isn't very hard, since its just about which name:value you want to index. you could filter search more also by adding type attribute to your row key/keyword. i.e boston - lookup:type: city.
The idea is to maintain your own row key based search index inside hbase.