Our professor said that in computer logic it's important when you add a number to another so a+b and b+a are not always equal.
Though,I couldn't find an example of when they would be different and why they won't be equal.
I think it would have to do something with bits but then again ,I'm not sure.
Although you don't share a lot of context it sounds as if your professor did not elaborate on that or you missed something.
In the case that he was talking about logic in general, he could have meant that the behavior of the + operator depends on how you define it.
Example: The definition (+) a b := if (a==0) then 5 else 0 results in a + operator which is not associative, e.g. 1 + 0 would be 0 but 0 + 1 would be 5. There are many programming languages that allow this redefinition (overwriting) of standard operators.
But with the context you share, this is all speculative.
One obscure possibility is if one or other of a or b is a high-definition timer value - ticks since program start.
Due to the cpu cycle(s) consumed to pop one of the values before addition, it's possible the sum could be different dependant on the order.
One more possibility is if a and b are expressions with side effects. E.g.
int x = 0;
int a() {
x += 1;
return x;
}
int b() {
return x;
}
a() + b() will return 2 and b() + a() will return 1 (both from initial state).
Or it could be that a or b are NaN, in which case even a == a is false. Though this one isn't connected with "when you add a number to another".
Related
CodeWars challenges again. Today I have a problem with this one:
"Your task is to split the chocolate bar of given dimension n x m into small squares. Each square is of size 1x1 and unbreakable. Implement a function that will return a minimum number of breaks needed.
For example, if you are given a chocolate bar of size 2 x 1 you can split it to single squares in just one break, but for size 3 x 1 you must do two breaks.
If input data is invalid you should return 0 (as in no breaks are needed if we do not have any chocolate to split). Input will always be a non-negative integer."
For some reason, the output is constantly 0 no matter what sides of the chocolate bar I provide.
What I've already tried:
object breakChocolate {
var result = 0
def breakChocolate(n: Int, m: Int) = {
var t = n*m
var i =0
def breaking(y:Int): Unit ={
if (t ==0 || t ==1)
result = i
else {
breaking(t%2)
i +=1
}
}
result
}
}
Here are the tests:
Test Results:
TestCases
breakChocolate(5, 5) should return 24
Test Failed
0 was not equal to 24
Stack Trace
Completed in 38ms
breakChocolate(7, 4) should return 27
Test Failed
0 was not equal to 27
Stack Trace
Completed in 1ms
Completed in 76ms
To solve this problem you don't need recursion at all. Consider the special case of chocolate plate: (1 x n). To divide this plate completely you need (n-1) breaks. Now you have plate m x n. To divide it into m pieces of form (1 x n) you need (m-1) breaks. So the total number of breaks is
(m-1) + m*(n-1) ~
m - 1 + m*n - m ~
m*n - 1
If I'm reading the Scala correctly, you've got the basic algorithm wrong.
This is actually a very simply problem, something similar to the old puzzle: if you have 55 teams playing in a single-elimination tournament, obviously some of them have to get byes in the first round, so there won't be a perfect even bracket. So how many total games will be played?
The answer: 54. Regardless of how the bracket is made, it's a single-elimination tourney. Every game reduces the number of remaining teams by one. So to get 55 participants down to one winner, 54 games will have to be played.
There is a similar argument to be made for your chocolate bar. At some point, you have p pieces of chocolate in front of you. Whichever one you select to break, you have taken 1 from the pile and put back 2, which means that the pile now has p + 1 pieces. So for every split you add one piece to the pile. This should lead directly to an answer...
...which may actually be wrong because of the need to return 0 in some cases, but it should be easy to special-case that.
You get 0 because you are not running breaking.
If you want to use recursion, one option could be to use a tail recursive function.
First decrement a checking it is greater than 1 to get the number of "horizontal" breaks to get the slices. Add 1 to the accumulator while looping.
Then decrement b checking it is greater than 1 to get the number of "vertical" breaks. This time add the starting "horizonal" value because that is the number of times you actually have to break the slices.
object breakChocolate {
def breakChocolate(n: Int, m: Int): Int = {
def breaking(a: Int, b: Int, acc: Int = 0): Int = {
if (a > 1) breaking(a - 1, b, acc + 1)
else if (b > 1) breaking(a, b - 1, acc + n)
else acc
}
breaking(n, m)
}
}
Scala demo
You can use this code instead:
function breakChocolate(n,m) {
if(n > 0 && m > 0) {
return n * m - 1;
} else {
return 0;
}
}
I am doing some of CodeWars challenges recently and I've got a problem with this one.
"You are given an array (which will have a length of at least 3, but could be very large) containing integers. The array is either entirely comprised of odd integers or entirely comprised of even integers except for a single integer N. Write a method that takes the array as an argument and returns this "outlier" N."
I've looked at some solutions, that are already on our website, but I want to solve the problem using my own approach.
The main problem in my code, seems to be that it ignores negative numbers even though I've implemented Math.abs() method in scala.
If you have an idea how to get around it, that is more than welcome.
Thanks a lot
object Parity {
var even = 0
var odd = 0
var result = 0
def findOutlier(integers: List[Int]): Int = {
for (y <- 0 until integers.length) {
if (Math.abs(integers(y)) % 2 == 0)
even += 1
else
odd += 1
}
if (even == 1) {
for (y <- 0 until integers.length) {
if (Math.abs(integers(y)) % 2 == 0)
result = integers(y)
}
} else {
for (y <- 0 until integers.length) {
if (Math.abs(integers(y)) % 2 != 0)
result = integers(y)
}
}
result
}
Your code handles negative numbers just fine. The problem is that you rely on mutable sate, which leaks between runs of your code. Your code behaves as follows:
val l = List(1,3,5,6,7)
println(Parity.findOutlier(l)) //6
println(Parity.findOutlier(l)) //7
println(Parity.findOutlier(l)) //7
The first run is correct. However, when you run it the second time, even, odd, and result all have the values from your previous run still in them. If you define them inside of your findOutlier method instead of in the Parity object, then your code gives correct results.
Additionally, I highly recommend reading over the methods available to a Scala List. You should almost never need to loop through a List like that, and there are a number of much more concise solutions to the problem. Mutable var's are also a pretty big red flag in Scala code, as are excessive if statements.
I am taking coursera course and,for an assignment, I have written a code to count the change of an amount given a list of denominations. A doing a lot of research, I found explanations of various algorithms. In the recursive implementation, one of the base cases is if the amount money is 0 then the count is 1. I don't understand why but this is the only way the code works. I feel that is the amount is 0 then there is no way to make change for it and I should throw an exception. The code look like:
function countChange(amount : Int, denoms :List[Int]) : Int = {
if (amount == 0 ) return 1 ....
Any explanation is much appreciated.
To avoid speaking specifically about the Coursera problem, I'll refer to a simpler but similar problem.
How many outcomes are there for 2 coin flips? 4.
(H,H),(H,T),(T,H),(T,T)
How many outcomes are there for 1 coin flip? 2.
(H),(T)
How many outcomes are there for 0 coin flips? 1.
()
Expressing this recursively, how many outcomes are there for N coin flips? Let's call it f(N) where
f(N) = 2 * f(N - 1), for N > 0
f(0) = 1
The N = 0 trivial (base) case is chosen so that the non-trivial cases, defined recursively, work out correctly. Since we're doing multiplication in this example and the identity element for multiplication is 1, it makes sense to choose that as the base case.
Alternatively, you could argue from combinatorics: n choose 0 = 1, 0! = 1, etc.
So I've spent hours trying to work out exactly how this code produces prime numbers.
lazy val ps: Stream[Int] = 2 #:: Stream.from(3).filter(i =>
ps.takeWhile{j => j * j <= i}.forall{ k => i % k > 0});
I've used a number of printlns etc, but nothings making it clearer.
This is what I think the code does:
/**
* [2,3]
*
* takeWhile 2*2 <= 3
* takeWhile 2*2 <= 4 found match
* (4 % [2,3] > 1) return false.
* takeWhile 2*2 <= 5 found match
* (5 % [2,3] > 1) return true
* Add 5 to the list
* takeWhile 2*2 <= 6 found match
* (6 % [2,3,5] > 1) return false
* takeWhile 2*2 <= 7
* (7 % [2,3,5] > 1) return true
* Add 7 to the list
*/
But If I change j*j in the list to be 2*2 which I assumed would work exactly the same, it causes a stackoverflow error.
I'm obviously missing something fundamental here, and could really use someone explaining this to me like I was a five year old.
Any help would be greatly appreciated.
I'm not sure that seeking a procedural/imperative explanation is the best way to gain understanding here. Streams come from functional programming and they're best understood from that perspective. The key aspects of the definition you've given are:
It's lazy. Other than the first element in the stream, nothing is computed until you ask for it. If you never ask for the 5th prime, it will never be computed.
It's recursive. The list of prime numbers is defined in terms of itself.
It's infinite. Streams have the interesting property (because they're lazy) that they can represent a sequence with an infinite number of elements. Stream.from(3) is an example of this: it represents the list [3, 4, 5, ...].
Let's see if we can understand why your definition computes the sequence of prime numbers.
The definition starts out with 2 #:: .... This just says that the first number in the sequence is 2 - simple enough so far.
The next part defines the rest of the prime numbers. We can start with all the counting numbers starting at 3 (Stream.from(3)), but we obviously need to filter a bunch of these numbers out (i.e., all the composites). So let's consider each number i. If i is not a multiple of a lesser prime number, then i is prime. That is, i is prime if, for all primes k less than i, i % k > 0. In Scala, we could express this as
nums.filter(i => ps.takeWhile(k => k < i).forall(k => i % k > 0))
However, it isn't actually necessary to check all lesser prime numbers -- we really only need to check the prime numbers whose square is less than or equal to i (this is a fact from number theory*). So we could instead write
nums.filter(i => ps.takeWhile(k => k * k <= i).forall(k => i % k > 0))
So we've derived your definition.
Now, if you happened to try the first definition (with k < i), you would have found that it didn't work. Why not? It has to do with the fact that this is a recursive definition.
Suppose we're trying to decide what comes after 2 in the sequence. The definition tells us to first determine whether 3 belongs. To do so, we consider the list of primes up to the first one greater than or equal to 3 (takeWhile(k => k < i)). The first prime is 2, which is less than 3 -- so far so good. But we don't yet know the second prime, so we need to compute it. Fine, so we need to first see whether 3 belongs ... BOOM!
* It's pretty easy to see that if a number n is composite then the square of one of its factors must be less than or equal to n. If n is composite, then by definition n == a * b, where 1 < a <= b < n (we can guarantee a <= b just by labeling the two factors appropriately). From a <= b it follows that a^2 <= a * b, so it follows that a^2 <= n.
Your explanations are mostly correct, you made only two mistakes:
takeWhile doesn't include the last checked element:
scala> List(1,2,3).takeWhile(_<2)
res1: List[Int] = List(1)
You assume that ps always contains only a two and a three but because Stream is lazy it is possible to add new elements to it. In fact each time a new prime is found it is added to ps and in the next step takeWhile will consider this new added element. Here, it is important to remember that the tail of a Stream is computed only when it is needed, thus takeWhile can't see it before forall is evaluated to true.
Keep these two things in mind and you should came up with this:
ps = [2]
i = 3
takeWhile
2*2 <= 3 -> false
forall on []
-> true
ps = [2,3]
i = 4
takeWhile
2*2 <= 4 -> true
3*3 <= 4 -> false
forall on [2]
4%2 > 0 -> false
ps = [2,3]
i = 5
takeWhile
2*2 <= 5 -> true
3*3 <= 5 -> false
forall on [2]
5%2 > 0 -> true
ps = [2,3,5]
i = 6
...
While these steps describe the behavior of the code, it is not fully correct because not only adding elements to the Stream is lazy but every operation on it. This means that when you call xs.takeWhile(f) not all values until the point when f is false are computed at once - they are computed when forall wants to see them (because it is the only function here that needs to look at all elements before it definitely can result to true, for false it can abort earlier). Here the computation order when laziness is considered everywhere (example only looking at 9):
ps = [2,3,5,7]
i = 9
takeWhile on 2
2*2 <= 9 -> true
forall on 2
9%2 > 0 -> true
takeWhile on 3
3*3 <= 9 -> true
forall on 3
9%3 > 0 -> false
ps = [2,3,5,7]
i = 10
...
Because forall is aborted when it evaluates to false, takeWhile doesn't calculate the remaining possible elements.
That code is easier (for me, at least) to read with some variables renamed suggestively, as
lazy val ps: Stream[Int] = 2 #:: Stream.from(3).filter(i =>
ps.takeWhile{p => p * p <= i}.forall{ p => i % p > 0});
This reads left-to-right quite naturally, as
primes are 2, and those numbers i from 3 up, that all of the primes p whose square does not exceed the i, do not divide i evenly (i.e. without some non-zero remainder).
In a true recursive fashion, to understand this definition as defining the ever increasing stream of primes, we assume that it is so, and from that assumption we see that no contradiction arises, i.e. the truth of the definition holds.
The only potential problem after that, is the timing of accessing the stream ps as it is being defined. As the first step, imagine we just have another stream of primes provided to us from somewhere, magically. Then, after seeing the truth of the definition, check that the timing of the access is okay, i.e. we never try to access the areas of ps before they are defined; that would make the definition stuck, unproductive.
I remember reading somewhere (don't recall where) something like the following -- a conversation between a student and a wizard,
student: which numbers are prime?
wizard: well, do you know what number is the first prime?
s: yes, it's 2.
w: okay (quickly writes down 2 on a piece of paper). And what about the next one?
s: well, next candidate is 3. we need to check whether it is divided by any prime whose square does not exceed it, but I don't yet know what the primes are!
w: don't worry, I'l give them to you. It's a magic I know; I'm a wizard after all.
s: okay, so what is the first prime number?
w: (glances over the piece of paper) 2.
s: great, so its square is already greater than 3... HEY, you've cheated! .....
Here's a pseudocode1 translation of your code, read partially right-to-left, with some variables again renamed for clarity (using p for "prime"):
ps = 2 : filter (\i-> all (\p->rem i p > 0) (takeWhile (\p->p^2 <= i) ps)) [3..]
which is also
ps = 2 : [i | i <- [3..], and [rem i p > 0 | p <- takeWhile (\p->p^2 <= i) ps]]
which is a bit more visually apparent, using list comprehensions. and checks that all entries in a list of Booleans are True (read | as "for", <- as "drawn from", , as "such that" and (\p-> ...) as "lambda of p").
So you see, ps is a lazy list of 2, and then of numbers i drawn from a stream [3,4,5,...] such that for all p drawn from ps such that p^2 <= i, it is true that i % p > 0. Which is actually an optimal trial division algorithm. :)
There's a subtlety here of course: the list ps is open-ended. We use it as it is being "fleshed-out" (that of course, because it is lazy). When ps are taken from ps, it could potentially be a case that we run past its end, in which case we'd have a non-terminating calculation on our hands (a "black hole"). It just so happens :) (and needs to ⁄ can be proved mathematically) that this is impossible with the above definition. So 2 is put into ps unconditionally, so there's something in it to begin with.
But if we try to "simplify",
bad = 2 : [i | i <- [3..], and [rem i p > 0 | p <- takeWhile (\p->p < i) bad]]
it stops working after producing just one number, 2: when considering 3 as the candidate, takeWhile (\p->p < 3) bad demands the next number in bad after 2, but there aren't yet any more numbers there. It "jumps ahead of itself".
This is "fixed" with
bad = 2 : [i | i <- [3..], and [rem i p > 0 | p <- [2..(i-1)] ]]
but that is a much much slower trial division algorithm, very far from the optimal one.
--
1 (Haskell actually, it's just easier for me that way :) )
So, while working my way through "Scala for the Impatient" I found myself wondering: Can you use a Scala for loop without a sequence?
For example, there is an exercise in the book that asks you to build a counter object that cannot be incremented past Integer.MAX_VALUE. In order to test my solution, I wrote the following code:
var c = new Counter
for( i <- 0 to Integer.MAX_VALUE ) c.increment()
This throws an error: sequences cannot contain more than Int.MaxValue elements.
It seems to me that means that Scala is first allocating and populating a sequence object, with the values 0 through Integer.MaxValue, and then doing a foreach loop on that sequence object.
I realize that I could do this instead:
var c = new Counter
while(c.value < Integer.MAX_VALUE ) c.increment()
But is there any way to do a traditional C-style for loop with the for statement?
In fact, 0 to N does not actually populate anything with integers from 0 to N. It instead creates an instance of scala.collection.immutable.Range, which applies its methods to all the integers generated on the fly.
The error you ran into is only because you have to be able to fit the number of elements (whether they actually exist or not) into the positive part of an Int in order to maintain the contract for the length method. 1 to Int.MaxValue works fine, as does 0 until Int.MaxValue. And the latter is what your while loop is doing anyway (to includes the right endpoint, until omits it).
Anyway, since the Scala for is a very different (much more generic) creature than the C for, the short answer is no, you can't do exactly the same thing. But you can probably do what you want with for (though maybe not as fast as you want, since there is some performance penalty).
Wow, some nice technical answers for a simple question (which is good!) But in case anyone is just looking for a simple answer:
//start from 0, stop at 9 inclusive
for (i <- 0 until 10){
println("Hi " + i)
}
//or start from 0, stop at 9 inclusive
for (i <- 0 to 9){
println("Hi " + i)
}
As Rex pointed out, "to" includes the right endpoint, "until" omits it.
Yes and no, it depends what you are asking for. If you're asking whether you can iterate over a sequence of integers without having to build that sequence first, then yes you can, for instance using streams:
def fromTo(from : Int, to : Int) : Stream[Int] =
if(from > to) {
Stream.empty
} else {
// println("one more.") // uncomment to see when it is called
Stream.cons(from, fromTo(from + 1, to))
}
Then:
for(i <- fromTo(0, 5)) println(i)
Writing your own iterator by defining hasNext and next is another option.
If you're asking whether you can use the 'for' syntax to write a "native" loop, i.e. a loop that works by incrementing some native integer rather than iterating over values produced by an instance of an object, then the answer is, as far as I know, no. As you may know, 'for' comprehensions are syntactic sugar for a combination of calls to flatMap, filter, map and/or foreach (all defined in the FilterMonadic trait), depending on the nesting of generators and their types. You can try to compile some loop and print its compiler intermediate representation with
scalac -Xprint:refchecks
to see how they are expanded.
There's a bunch of these out there, but I can't be bothered googling them at the moment. The following is pretty canonical:
#scala.annotation.tailrec
def loop(from: Int, until: Int)(f: Int => Unit): Unit = {
if (from < until) {
f(from)
loop(from + 1, until)(f)
}
}
loop(0, 10) { i =>
println("Hi " + i)
}