I have the code below which executes an exe file and then i want the path which is assigned to a variable to be copied into the text box of that exe and once it gets copied then the next button in the exe should get clicked\executed automatically by powershell.
& "D:\SOFTWARE\notepad ++.exe"
$Path="C:\Program Files"
Basically i will be using this code for some other exe file but process would be same. So is there any way by which i can do this by using powershell?
Consider the snapshot below of the UI of application installed. If i want to pass the product key which i have declared in a variable inside the powershell after passing it to the application and then i want its Get Product Details button to be hit\Run.
What you actually want is pass the variables into the msi by running it quietly without UI. Try the following first (assuming your exe is actually just an MSI wrapper)
msiexec.exe /i $PathToExe /q /l*vx log.txt
This should quietly launch the msi and produce a log.txt file. Wait a few moments for it to complete since it is installing in the background. Then check if it correctly installed. Then check the log file to see all the variables that were set at the end. Guessing by their names or values, you could then pass them in the next time simply by adding variablename=variablevalue to the command line call. You might need to experiment and learn a bit about MSI and msiexec as part of this.
If talk about invoking UI actions in general, then you would need to look at the AutomationElement class but it can get very complex here on...
You should look at using SendKeys.
https://blogs.technet.microsoft.com/heyscriptingguy/2011/01/10/provide-input-to-applications-with-powershell/
Related
I am trying to run a powershell script with uipath. I have found two approaches to run it;
Read the script as a text and pass to Invoke Powershell activity
Use Run powershell script activity from Script Activities package
Now I need to pass arguments to the powershell script from uipath. Some have mentioned about formatting the string with parameters and invoking the script.
But, rather than that, think we can directly pass parameters from UiPath.
In Run Powershell script, it has Parameters as input
In Invoke Powershell, it has Parameters under Input section and PowershellVariables under Misc
I have been searching for a while. But still I am unable to figure out how to pass parameters using above activities.
I am trying to send outlook mails using powershell. Still in the process of learning how to work with it. Plz help…
EDIT
Found solution for one approach. Added it as an answer.
Found an answer from this link. Out of the two approaches, it provides a solution to pass the parameters using Invoke Power Shell activity.
Read the .ps1/.txt file containing the script, with Read Text File activity
Call the Invoke Power Shell activity by passing file content as CommandText and parameters in the Parameter collection.
But, it would be great, if I can get to know how to pass parameters using Run power shell script activity.
Objective:
I'm trying to use a program called Texmod.exe to start another program (exe) with certain parameters.
Background:
Texmod is program that opens up another exe and extracts/replaces textures that are pulled up in the second program while it is running. I'm trying to start the second exe with the parameters: -AlwaysFocus -ControllerOffset=1 -SaveDataId=2. Starting the second exe with shortcuts/.bat that have these parameters in a command line DOES work. However, I would like to do this in conjunction with Texmod.
Complications:
I'm using Texmod v0.9 b which doesn't support starting an exe with command line parameters. Newer versions, such as the open source reboot known as uMod, does support but it doesn't replace textures as well and crashes often compared to the original version.
Texmod.exe must start the second exe directly. Texmod can't select a shortcut to start the exe. I've tried making Texmod start another exe/.bat that then starts the second desired exe with parameters but this causes Texmod not to function.
Methods I have thought about but not sure if they work or even possible:
Somehow forcing all processes started by Texmod.exe to start with certain parameters
Somehow force the desired exe to always start with certain parameters regardless of start method (via Texmod, shortcuts, .bat, etc)
Add parameters to the process started by the desired exe after it is already running
Obviously I'm open to any ideas. Is what I'm asking even possible? Sorry if it seems unclear or I sound irrational; my knowledge on this is limited.
Edit: #Toby Speight I'm not sure what you mean by an example of the code I'm having trouble with as I'm just wondering if it's possible to perform the scenario I described. This is where I got the Texmod program from (it's the oldest release texmod.zip - Original TexMod 0.9 beta). I've searched the internet for possible solutions but I've found very few so some of the methods I've tried are:
Used Texmod.exe to start a desktop shortcut with target: "directory to exe" -AlwaysFocus -ControllerOffset=1 -SaveDataId=2. The result was Texmod couldn't use the shortcut and just opened the exe without the parameters.
Used Texmod to start an exe named caller.exe which started the exe I desired using the method described here. In command.txt, described by the instructions, I put ""name of exe.exe" -AlwaysFocus -ControllerOffset=1 -SaveDataId=2." The result was the exe started with the parameters but Texmod failed to modify the textures because it was modifying textures pulled up by caller.exe instead.
Used Texmod to open a .bat file with the lines: ""name of exe.exe" -AlwaysFocus -ControllerOffset=1 -SaveDataId=2." The result was the same as attempt described in #2.
Edit2: I also stumbled on this page where someone else claims they managed to achieve what sounds like the objective I desire. However, I do not know enough about code to understand it. If someone could look over this to see if it would work or see if they can modify it to fit the arguments that I desire.
You can use windows registry to force Windows run another app when specific .exe is called. Let me show an example: i'm trying to use TexMod with Remember Me.
Required setup:
Create a copy of game .exe, place it near original with different name, eg RememberMe_copy.exe
Go to windows registry location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options
create new key named as original .exe, in my case it's RememberMe.exe. Registry key looks like a folder.
In this key, create new string value named Debugger with full path to copy of .exe with required commandline args. For example: "C:\Program Files (x86)\Steam\steamapps\common\Remember Me\Binaries\Win32\RememberMe_copy.exe" -ReadPoolSizeFromIni. Note the path to .exe is quoted, commandline arguments are not. String value has type REG_SZ.
Now when you try to run anything called RememberMe.exe, Windows will instead run the RememberMe_copy.exe with specified parameters (and something else but we don't care). This feature is left in Windows for debugging purposes.
Finally, open TexMod, select RememberMe.exe. It will think it's running original file, but instead Windows will silently run another file with another parameters. As there is nothing else in between, TexMod is happy.
Why can't we use single file? Well, Windows will run original .exe instead of original .exe, then instead of it will run original .exe... causing infinite loop.
Is it possible to execute some code (eg. a function, script block, cmdlet etc) whenever the current path changes in the PowerShell console or ISE?
The scenario I am thinking of is to modify some environment variables and dot source some location-specific PowerShell functions depending on the current folder.
You have several options. You can remove the "cd" alias and then write a "cd" function and add the desired logic. The downside to this approach is that if someone uses Set-Location, your function is bypassed. Another option is to create a proxy command for Set-Location. Shay (and Kirk) have a video on how to do this here. The nice thing about this approach is that the built-in ways to change dir (cd and Set-Location) will go through your proxy command.
What is the best and correct way to run a PowerShell script from another one?
I have a script a.ps1 from which I want to call b.ps1 which does different task.
Let me know your suggestions. Is dot sourcing is the best option here?
Dot sourcing will run the second script as if it is part of the caller—all script scope changes will affect the caller. If this is what you want then dot-source,
However it is more usual to call the other script as if it were a function (a script can use param and function level attributes just like a function). In many ways a script is a PowerShell function, with the name of the file replacing the naming of the function.
Dot sourcing makes it easier to at a later stage convert your script(s) into a module, you won't have to change the script(s) into functions.
Another advantage of dot sourcing is that you can add the function to your shell by adding the file that holds the functions to Microsoft.PowerShell_profile.ps1, meaning you have them available at all times (eliminating the need to worry about paths etc).
I have a short write-host at the top of my dot sourced files with the name of the function and common parameters and I dot source the functions in my profile. Each time I open PowerShell, the list of functions in my profile scrolls by (If like me, you frequently forget the exact names of your functions/files You'll appreciate this as over time as the number of functions start to pile up).
Old but still relevant.
I work with modules with "Import-Module ", this will import the module in the current powershell session.
To avoid keep in cache and to always have the last changes from the module I put a "Get-Module | Remove-Module" that will clear all the loaded modules in the current session.
Get-Module | Remove-Module
Import-Module '.\IIS\Functions.psm1'
I have both Sybase and MSFT SQL Servers installed. There is a time when Sybase interferes with MS SQL because they have they have some overlapping commands.
So, I need two scripts:
A) When runs, script A backs up the current path, grabs all paths that contain sybase or SYBASE or SyBASE (you get the point) in them and move them all at the very end of the path, while preserving the order.
B) When it runs, script B restores the path from back-up.
Both script a and script b should affect the path immediately. So, if a.bat that calls patha.ps1, pathb.ps1 looks like so:
#REM Old path here
call patha.ps1
#REM At this point the effective path should be different.
call pathb.ps1
#REM Effective old path again
Please let me know if this does not make sense. I am not sure if call command is the best one to use.
I have never used P.S. before. I can try to formulate the same thing in Python (I know S.O. users tend to ask for "What have you tried so far"). Well, at this point I am VERY slow at writing anything in Power Shell language.
Please help.
First of all: call will be of no use here as you are apparently writing a batch file and PowerShell scripts have no association to run them by default. call is for batch files or subroutines.
Secondly, any PowerShell script you call from a batch file cannot change environment variables of the caller's environment. That's a fundamental property of how processes behave and since you are calling another process, this is never going to work.
I'm not so sure why you are even using a batch file here in the first place if you have PowerShell. You might just as well solve this in PowerShell completely.
However, what I get from your problem is that the best way to resolve this is probably the following: Create two batch files that each set the PATH appropriately. You can probably leave out both the MSSQL and Sybase paths from your usual PATH and add them solely in the batch files. Then create shortcuts to
cmd /k set_mssql_path.cmd
and
cmd /k set_sybase_path.cmd
each of which now is a shortcut to a shell to work with the appropriate database's tools. This is how the Visual Studio Command Prompt works and it's probably the cleanest solution you have. You can use the color and prompt commands in those batches to make the two different shells distinct so you always know what environment you have. For example the following two lines will color the console white on blue and set a prompt indicating MSSQL:
color 1f
prompt MSSQL$S$P$G
This can be quite handy, actually.
Generally, trying to rearrange the PATH environment variable isn't exactly easy. While you could trivially split at a ; this will fail for paths that itself contain a semicolon (and which need to be quoted then). Even in PowerShell this will take a while to get right so I think creating shortcuts specific to the tools is probably the nicest way to deal with this.